EA8500 - question of firmware 1.1.4.169978

Similar Questions

• WRV54G: question of firmware upgrade

  Hello

  At the office, I have an old wrv54g hardware Rev 02 running 2.37EU firmware.

  Years, I have used QuickVPN to connect to the Office network when you work from home. I use QuickVPN 1.0.39 (I know it's old, but it works) my laptop under Windows XP SP1/2/3. But now, I need to establish connections to both Vista and Win7 - and have downloaded the latest version of QuickVPN (1.4.1.2) customer. But the failure of any attempt to establish connections. So I thought I'd try updating the firmware on the wrv54g - but the firmware 2.37EU is - to the best of my knowledge - the most recent EU-firmware.

  My question is: are there - hardwarewise - differences between the model American and European of the wrv54g that prevents me from flashing the device with the 2.39.2e firmware (the last fw last time I checked). SE I have 'brick' it or can I just move on?

  Hello and welcome to the community at the homepage of Cisco!

  The WRV54G is now the Cisco Small Business Support Community.

  You must create an account in order to post here.

  Thank you.

• G10: Question about firmware UJ - 831 S.

  I updated my firmware for the UJ - 831 S DVD RAM of my G10 to 1.02. He still does not write platinum DVD + R 8 speed (A2Z MID'DAXON) at the right speed. It is still burning speed 2.5.
  When is a new firmware with the latest ID. til (A2Z DAXON for example) provide?
  It's a drive OEM is mast Toshiba responcability * say...

  Hello

  Well. Sorry I n t found any official documents regarding the new firmware.
  But in my opinion it s not a problem of firmware update.
  However, you should try to burn DVDs another because not all media works without any problem. In my opinion, the TDK DVD are very good. Also in the user manual you should find some information on compatible CD and DVD media and who are tested and work well on this device.

  Best regards

• 102 following questions updated firmware.

  If anyone is interested I refer them to my many previous posts, ending at that time.

  https://community.NETGEAR.com/T5/backing-up-to-your-ReadyNAS/ReadyNAS-102-not-backing-up-and-freezin...

  What I mean is that since I changed my NAS manufacturer, I have not had one problem with my NAS, backups have been very good and 100% perfect. All firmware updates ran as if in a dream.

  Love me folks, vote with your feet.

  Closed for good.

• Question of firmware update hard drives/RAID

  We have a Server Power Edge R210II with OS MS Server 2008R2 and a Controller PERC H200 RAID (two disc HARD 1 TB Seagate SATA in RAID1).
  Recently, there is a new firmware for Seagate drives on a dell (Package update for MS Windows) support site.
  I really don't want to lose the server :) and never update firmware on the disks on the server with RAID (I've updated the players only on PC).
  Can someone tell me a procedure to update the firmware on my drives? Problems with the upgrade, best practices etc?
  Thanks for any help,
  Marius

  Best practices:

  • First have a backup. Should data not destructive, but everything can happen.
  • Use SUU or Repository Manager to update ALL of your system - iDRAC/BIOS firmware, PERC and other firmware must be updated before the firmware of the HARD drive.

  Most HARD drive firmware updates are bootable, so you just get the utility boot and update.

  You cannot update firmware of the drive not Dell with Dell firmware (i.e. If you bought the retail/generic readers).

• Question of Firmware SG200

  Hello

  What is the update for the switches of the series SG200 indicating support for the CDP in April 2011, specified in this document:

  http://www.Cisco.com/en/us/prod/collateral/switches/ps5718/ps11229/data_sheet_c78-634369.html

  Actually going to be released?

  Thank you.

  Hello

  I strongly expect to version 1.1 product 300 series. I have a beta version and it's great, but he said that the generally available (GA) release is due in May.  Just got a response in the 200 series product manager and he suggested that the time is pushed in the middle of the year...

  He will receive our marketing people to make changes to the Web site. It is no consolation, but I apologize.

  Best regards, Dave

• Why my airport extreme is overheating?

  For the last week my Airport extreme did evidence of a status message saying that it could be overheating. It was behind my iMac so I moved it to the desktop to ensure it becomes quite convenient, and he still has questions. Firmware is up to date, and the airport is barely more than a year. I received it the year last for Christmas. Not sure what is the cause. Is this just a hardware problem?

  I guess two things:

  1. There is plenty of space around the base station itself, and
  2. The room is held where the base station is not excessively hot.

  Your AirPort Extreme 802.11ac has an internal fan to the top of the unit and air is drawn in and exhausted by the bottom. It would be possible to have a few "dust bunnies" in the database or that the fan is defective.

  To get a better idea on what's inside, please look at the following disassembly of iFixit for this device.

• A record in the table is not approved

  We have a PS4100x Equallogic in production. A few days ago one of the drives has failed and we ordered an original Dell HDD for this device. When we replaced the damaged for a new, the console says that the disc is not approved.

  We checked the documentation and cannot find that this happens when there are questions of firmware when the drives are not original (who from not Dell) and not alike.

  The other thing is that when I try to add to the table, the "Add table" option is gray out.

  Any help would be grateful, thank you!

  Hello stamac,.

  I'm sorry, but only Dell Equallogic brand work readers in a table EQL.  It is custom firmware on the drive on which the search table.   There is no work around for this.

  Kind regards

  Don

• Drivers Intel P3700 for VSANS?

  I worked with our VMWare team to design a VSAN out and it included some Intel P3700 PCIe cards like the layer flash supported by about 1.2 TB of Seagate sas disks 10 k for storage.  Unfortunately, even of the P3700 disappeared not on the HCL, and I am currently "chasing my tail" with latency, and i/o pending.  I opened a SR, but recommended for the H730 drivers do not seem to do anything.  And I'm fairly certain that's not the issue (deactivation does not seem to be a problem).  I understand that the P3700 didn't HCL yet, but it is still ongoing and so many white papers were written with this card as part of the architecture.

  It's all running VMWare 6. 0 b (VMware ESXi 6.0.0 build 2494585 on hosts)

  Material:

  -From r630 Dell (30)

  -2 x Intel P3700 400 GB Flash cards (driver intel-nvme - 1.0e.1.1 - 1OEM.550.0.0.1391871.x86_64.vib)

  -10 x 1.2 TB SAS of Seagate 10 k disks

  -H730 Dell RAID controller in HBA mode with cache is disabled, etc. (drivers for this were something to worry about, but since I assume that the first writings go directly to PCIe cards, I don't think that's the question long - firmware 25.3.0.0016 pilot 6.606.12.00)

  -Intel X 710 with DAC 2 x 10 Gb connections

  -4 x Juniper QFX5100 10 GB switches (15 r630 by 2 switches, scaling up to 30 servers in 2 past later)

  
  

  SAN traffic exceeds 2 uplink (with uplink 1 standby), everything else is plus 1 uplink (with uplink 2 as before)-working on a plan to spend LACP, but it is still under construction

  
  

  The current workload is very low.  It is only about 6 Production VM running on that cluster to the repositories of the project and kicking the tires, with the idea that 500-1000 VM will be launched upward in the coming months.  For the majority of virtual machines, the performance is not essential, but some of the problems I see currently are a bit a showstopper.

  
  

  Problems:

  If I run "bonnie ++ u root" on a virtual machine single, I can see the latency time to go up to 65, 000ms (Yes, really 65 k ms) and the virtual machine is basically responding (100% iowait and very rarely is able to write i/o because of the huge latency).  The write buffer is never very full during this period (stuck at 30% and deactivation does not start even during the race.)  Similar issues occur ATTO Disk Benchmark running on a windows system with a disk queue high (4 seems to be well, 10 kills of the VM)

  
  

  I can get very high write speeds (500 - 800 MB/s or more), but as soon as the latency time leapt to a few 100 ms, it's all downhill.

  
  

  Even with a fairly simple recording VM with all our guests directed to these, I get occasional spikes of latency (1400ms +, with an average of 15ms, which seems high even).  This box just works a lot of entries to logstash and a hint of elasticsearch with occasional when bed kibana someone shows something.

  Y at - it no rider special I read somewhere for the P3700 Intel?  Another thing that I really should look into?  I'm tired of chasing my tail and want to start the actual load of the migration to this new cluster.  I tried RAID0 on a small cluster of 4 boxes, but that wasn't much better and is much more boring.

  I use the 1.6 and 2.0 TB P3700 cards in my VSAN without problem. I have a similar setup, except using r730xd, the same with the same firmware + drivers raid card, also on 6. 0b. When I originally put in place, I could see peaks of latency high 200-400 + ms, it was resolved by updating the drivers of NETWORK card for me. I use a NIC (Intel X 540 - AT2), different, but the firmware upgrade + the driver for my NIC brings my latency ~ 3ms avg and blip occasional peak at ~ 15ms. Probably worth to update any firmware on your X 710 and use the appropriate driver on VMWare HCL VMware Compatibility Guide: search for i/o device

  I've also seen really bad latency problems out of network configuration problem. In our case that we had a link to 1 GB failover in case our 10 GB failed, but instead things are started to be load-balanced and performance/latency was very poor until we noticed that the 1 GB has been fully utilized.

  Also try to use the Inbox NVME driver, I ran on it without problem before Intel released the driver 1.1 you use now. In my limited testing, Intel drivers are slightly faster performance but nothing majorly different.

• Unable to find the system volume, reconfiguration is not possible

  Hi all

  When I use autonomous Vcentrer of conversion to convert windows 7 PC, I get the following error.

  ""Cannot find the system volume, reconfiguration is not possible".

  I use Windows 7 64-bit PC with PGP encryption.

  
  

  Please help me to solve this error.

  
  

  
  

  See you soon

  Kumar R
  

  No, do not all repair with VSS, because his race for your C: drive

  Now the main question: your firmware from the computer's BIOS or EFI (or EFI running in emulation of the BIOS)?

  Why I ask: when converter trying to reconfig machine (data is already copied) we found information BCD in place where it is stored to * EFI * machines, seems that it is false BCD and the converter cannot remedy this situation...

  As a workaround, you can locate on your source disk folder named EFI (C:\EFI) and rename or delete. (if somehow that this is related with PGP the best choice is to rename the folder).

  Then repeat the conversion.

  HTH

• Re: 39L4333DG firmware updated to 7.1.90.22.01.1, questions

  Yesterday, my TV did a two steps upgrade to v7.1.90.22.01.1 (I assume that the version is that, as noted later my TV does not check on the TV itself).
  In two steps, I mean that he first downloaded a whole lot restarted to blue screen, updated and then downloaded another big package at the opening of CloudTV.

  My questions are:
  * How do I know exactly what's new? I just saw different faces of the guys Nice on the right side of the House
  * do you think that it is really necessary to reset?
  * I tried to translate [this | http://tweakers.net/productreview/85265/toshiba-32l4363dg.html] page with google and at the end it seems to recommend don't try do not update the firmware if you don't have the old one at hand. Google translate to English in this way 'Fortunately I can always download from the site Web of Toshiba 7.1.56.16.01.1 the old version of 06.29.2013 and the downgrade of TV. This version is now is no longer to download. Attention during the upgrade the firmware if you do not have the old firmware. "My question is: where can I find the firmware packages and how can we put them on TV, possibly decommissioning updates that has turned?

  Thank you!

  Hello

  Sorry mate but I'm a little confused about your message from Mr.

  The TV firmware can be updated via the network or you can also download the latest firmware here: http://www.toshiba-om.net/firmware.php and update the software manually...

  The TV (if active) software update via the network starts when the package has been downloaded correctly. In the information system, settings, you can check the version of the software that is currently installed (get help-> information system)

  Info help you?

• Satellite C660 - update the HARD drive firmware question

  I have satellite C660 with hard drive: MK3275GSX, firmware: v.GT001M. On another Web site support site I found the update of firmware for v.GT002D ([link: http://www.dell.com/support/drivers/mw/en/mwdhs1/DriverDetails/Product/latitude-e6330?driverId=FP21C&fileId=3126089791&osCode=W732 & languageCode = en]).

  Can I use this update?

  Question may be stupid, but why firmware update HARD drive? Over the past 10 years I ve ever installed an update of the HARD drive.

  If Toshiba support doesn t offer an official update on the download page, I think that you don t need.

• Question about 4.0.4 latest firmware

  Hello Moto, I had updated my device to the latest firmware (673.94.324.XT910. PSHAsiaRetail.en.03) via OTA. Completed the update very well. I did a factory reset after the update of data. When you set the camera after startup, there was no account Setup Wizard (I love this feature because I often have to do a hard reset on my phone). The Startup Wizard just to skip setting up accounts for some unknown reason. So the question is, has my update succeeded or he just missed a file during the update? Maybe it was a bug in the firmware related? Its just me to be skeptical, not a big deal though. Thank you.

  This isn't a bug, all right. Setting up the account has been deleted.

• Sansa C250 v2 (01.01.05P). microSDHC? update to the latest firmware? Linux questions.

  People of greetings,

  just got my refurbished Sansa C250 2 GB. Back to v2. Parameters a 01.01.05P for the version number.

  I read somewhere on these forums that even if v2's back, it does not mean necessarily that the player is actually v2. Is this true? How can I tell what version it is?

  So should I upgrade to the latest firmware and which?

  I plan to buy either a 4 or 8 GB card microSDHC. Advice please.

  Anyone who has used linux to update firmware and for all other operations or would I have to use windows?

  Thank you

  Prasad

  Well, since nobody answered my questions, I will answer them myself.

  As has been said on this forum and others (http://www.anythingbutipod.com/forum/showthread.php?t=24680), this is the version of the firmware that you use to know the version of your player. Mine is v1. I think another, or should I say a sure way would try to penetrate into the first partition (or the partition to install the firmware) - If your drive is v1, it would be to put your player mode waiting (moved to the rec and orange shows on the left button) press and hold the rec button and plug it into a computer should appear the partition of 16 MB. V2 has a different key sequence.

  Since it is highly recommended to upgrade to the latest firmware, I upgraded to 01.01.00P which, by version number appears a downgrade, but it is what is here to... He did bring back the USB menu however.

  Since then, I could install Rockbox (http://forums.sandisk.com/sansa/board/message?board.id=c200&thread.id=3396), I'll go ahead and buy a 8 GB microSDHC card. Will post here when I get it to let you know if it worked or not. I think that should be. This post helped me decide to go ahead and buy it: http://www.anythingbutipod.com/forum/showthread.php?t=35302.

  I used two Fedora-7 and live CD Fedora-9 (on USB) - no problem.

  just something I did - I took a return of my entire 2 GB (after formatting the partition of 2 GB to get rid pictures and music that came on the player). used dd if = / dev/sdc. gzip - c > sansaC250. Also saved the first (16 MB) partition dd if = / dev/sdc1. gzip - c > sansaC250part1. I just thought I might be able to use it if I bricked my drive when rockboxing it. I don't know if restore partitions (or the entire disk) is unbrick it at all. Happy had to use it.

  Take advantage of...

• Ask questions about the functionality of EA8500 MU-MIMO

  Dear Linksys

  I bought EA8500, and it arrived today.

  I have two questions about the functionality of MU-MIMO of EA8500 AP.

  1. I want to compare the performance between SU-MIMO and MU-MIMO, but there is no option to control this feature in the router admin page. Is that one of the possible ways?

  2 EA8500 supports 1733 Mbps wireless speed, but it resembles the speed of 1 Gbps ethernet cable.

  This router supports really speed 1 Gbps ethernet? or y at - it an option to support more throughput as the aggregation of links?

  Thank you

  Hi, hyeonu. For your first query, it is not possible because there is no option to disable the feature of MU-MIMO on your Linksys EA8500 router. In addition, with regard to your second, you can get a higher throughput of 1 Gbps since this is the maximum capacity of your ethernet connection.