Re: 39L4333DG firmware updated to 7.1.90.22.01.1, questions

Similar Questions

• Issue on Photosmart 7520 firmware update

  Hello

  I just got my new HP printer today and it is a HP Photosmart 7520, which is optimal.

  I was looking online and I noticed there is a firmware update in the support section.

  My question is my printer has firmware ELM1CN1409AR and the HP firmware site is ELM1CN1320AR. Is my most recent firmware or the one shown on the HP support site?

  My firmware is older, should I update the firmware or just to leave things as is?

  I'm not having problems with the printer from now, but I always check all drivers and firmware all my products.

  Thanks in advance

  Fred

  as long as you are connected to a computer via USB... I doubt that you will experience the problems that are reported SIGNIFICANTLY on the 7520.

  As you saw in my post that you referenced, with a USB connection, the problem of intermittent scanning/printing moved not.

  In addition, please see my entry in the post depending on the current firmware version vs what HP has posted on its support page:

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/7520-won-t-stay-connected/TD-p/3954900

  the version currently installed on your printer, ELM1CN1409AR, is the last (at the date of this post) that any printer 7520 connected to a router will be automatically updated.

  However, please note that for those of us, using a wifi connection from the printer to a router, the firmware version ELM1CN1409AR has not resolved intermittent connectivity issues.

• firmware update

  I tried updating my two cinema Display on my iMac (27 inch, end 2013) iMac Intel Core i7 3.5 GHz 32 GB 1600 MHz DDR3 NVIDIA GeForce GTX 775 M 2048 MB tons of time, using all possibilities, but unfortunately not worked.

  What is happening with this firmware?

  Hello RUBENSCOSTA,

  Thanks for this info and choosing the communities Support from Apple. I know how important to get your Cinema Display works again is for you!

  If I understand correctly, you are unable to update the firmware on the LED Cinema Display. I would like to try the following steps to get these working again:

  1 make sure that your iMac has all available firmware updates installed as well:

  On the updates of the EFI and SMC firmware for Mac computers with Intel processor

  2. try to follow the process in this article on the updating of the LED Cinema Display Monitor:

  On the 27-inch LED Cinema Display Software Update 1.0

  3. If you're still having problems, you can see the general troubleshooting guide:

  Get help with your Apple Cinema Display Monitor

  See you soon!

• Airport Express firmware update

  I had a Firmware Update for my Airport Express.

  How can I update? I can only choose ignore, do not to update. In other words, what I did now.

  Zu-updates information to update Firmware as airport-Basisstationen - Apple Support

  It's funny. I think it's a bug.

  Airport-Dienstprogramm 6.3.6 on El Capitan

  "You are not allowed to create or update this content" - funny too.

  This firmware it works now?

  What model is the Express?

  You can do it manually even if it is a bit complicated.

  Re: proxy server annoy 7.6.7 update?

• Wan interrupts the connection after the firmware update

  Looks like the latest firmware upgrade is the source of the problems.

  I've just updated my timecapsule 1 TB of first generation version 7.6.7 and my 3 TB timecapsule new version 7.7.7

  Both are connected to the router of the provider of Internet services and extend the network even in my house.

  WiFi is stable until the upgrade, but now the connection is lost every few minutes or seconds.

  Both versions are later to the respective timecapsules.

  I end up having to downgrade if no solution is found.

  I powered the two market still nothing does not. Redefine the network and tried both hidden and not hidden, yet once nothing doesn't.

  Any ideas on what is causing the problem?

  Well, since nobody seems to have an explanation, and Apple are not out with firmware update after 7.7.7 and 7.6.7 I decided to downgrade the firmware to the previous version. I now run version 7.7.3 on the new 3 Tb Time Capsule and 7.6.3 on the 1st Gen Time Capsule. So far, the network is stable. Using WiFi Explorer Ii see that they use channel 6 and 8 respectively. Signal is strong and no dropouts have taken place so far. Hope the issue is resolved in the next firmware update.

  As I read in another post: firmware update does not solve a problem, you didn't. However, it can create a problem that you didn't.

• TimeCapsule Firmware update 7.6.4 is not possible

  on my Timecapsule is not possible firmware update.

  Airport utility shows me that there is an update, but I have no button to update.

  

  Hold down the option key and click two times on the base station. before an option there will be updated to version, click on it.

  The system will reboot and firmware will be updated.

• Airport Extreme Base Station model bricks A1408 after failed firmware update

  Shown on Macbook Pro iOS X 10.10.5 airPort utility update the firmware available for both devices on my network 3 June 2016
  1 Airport Express 7.6.7

  2 version of Extreme Base Station Airport unknown as not reported as I expected not die

  After the update successful of the AirPort Express, the update cannot be installed on the Base Station firmware.

  After waiting a while, I tried the update again which also failed to install.

  Current symptoms:

  a. the Base Station is hot indicating energy consumption

  b. No. LED light is during the power on self test or during the race

  c. not discover measure on the WIFI network

  d. is not identified on Ethernet connection without light next to the Ethernet port

  e. DC output is 12V on the connection of the power supply works as expected

  f. cannot perform factory reset using the reset button on the back of the Base Station

  Where other devices working on the same power supply as the Base Station that very sensitive to power outages - these remain functional during the attack of upgrading me to think that he has not lost power while firmware update took place.

  My home network is made entirely of Apple devices - should I worry on the application of the firmware updates in the future.

  It's embarrassing and I now Cat5 running through my house just to maintain services.

  I can't confirm the date of purchase, so I don't know if it is covered by the warranty, however, I'd like to think Apple would cover this.

  What I am doing wrong and y at - it a way to recover the device.

  Help

  We have seen a few posts of users who have had the same problem.

  Unfortunately, not a really nothing you can other your advocate Support of Apple.

  Good luck and hope that you will have this resolved quickly.

• Cannot run AirPort Extreme or Express 7.7.7 Firmware update-> gray button

  Hello!

  I have an AirPort Extreme and Express stations. Both come with a pill that indicates a upgrade must be performed:

  

  Now, I click on the AirPort Express icon. The following window appears:

  

  He told me that a Firmware update is available. But in this window, I can only select "ignore". I can't select the choice of the update.

  If I click on the "Edit" button to change the settings of the station:

  

  But in the window that appears, the "Upgrade" button is gray:

  

  The same thing happens when I click on the icon of the AirPort Extreme station.

  What is the secret path to the update of the Firmware 7.7.7?

  Thank you

  JHR

  Montreal

  MacBookPro 13 "mid-2012. 10.10.5 OSX

  Click on 'version' and you should be able to update from there on.

• TimeCapsule downgrades WiFi 2.4 GHz after applying the firmware update v7.6.7

  After applying the firmware update v7.6.7 free WiFi to TimeCapsule is now 2.4 Ghz instead of 5 Ghz.

  It was the update of the firmware with certainty that has made this... no doubt about it:

  • My mouse bluetooth interference notice when my MacBook is connected to WiFi 2.4 Ghz;
  • Before the update, everything is OK
  • After updating, my mouse mouse start jittering
  • < alt-click > WiFi icon in the menu bar confirms: the connection is now 2.4 Ghz

  Restart to e TM Mo doesn't change anything.

  In the TC WiFI options tried to put another name to the network successfully, but only 5 GHz can not connect to it: timeout error every time.

  Tried the hard reset of TC and reconfigure the WiFi... the same result, but with a difference:

  • Setting an SSID separated for 5 GHz connection (in the WiFi options) has now created a network I can access.
  • However, this is not the best solution... I don't want 2 SSID.

  It is not the first time Apple breaks things with updates... and I see people move away from Apple to this kind of situations.

  I also had bad experiences with OS updates lately and postpone the as much as possible.

  The problem is that I can't go back... or can I?

  Any help is welcome.

  THX

  The problem is that I can't go back... or can I?

  Of course, you can, but it may or may not help.

  Open AirPort Utility

  Click on the image of the AirPort base station

  Hold down the option key on your Mac while you click on the version number of the firmware

  A drop down menu appears

  Choose the version of the firmware you want to use

• TimeCapsule firmware update error, now defunct

  I received notification of a firmware update for my TimeCapsule AirPort, then click it to start the update. He seems to have run the update and was himself reboot after the bar got to end state. He came back with a message 'update error occurred'. Now the airport is not at all in the AirPort Utility window. Tried unplugging the power at the airport to force a reboot. Tried the manual reset button, still not joy.ow I have a constant flashing orange.

  Now, it's just an amber flashes continuously. And nothgin all appear in AirPort Utility window.

  Thoughts?

  Tried the manual reset button

  Sorry, don't know what this means, because there are 3 types of resets.

  Have you pressed the button of reset for 1 second and then release?

  Do you have the reset button during 5-6 seconds and observe the led flashing quickly until you release the reset button?

  Or something else?

  Have you restarted your Mac?

• Firmware update recent Airport 7.6.7 causing problems with VoIP

  Hi all

  Firmware update of recent Airport 7.6.7 causing problems with VoIP.

  Unable to connect voip since update...

  Any help appreciated.

  Thank you

  It might be useful to know what VoIP that you use and what type of problem the update affects your VoIP.

  My MagicJack & NetTalk lines properly.

  Jim

• Airport Station Basic 7.6.7 Firmware update

  Link to Airport Base Station Firmware Update 7.6.7 does not connect.

  Airport utility opened via spotlight. Keep now hold option key and click two times on the base station. in front of the version there will be a update option & so click it.

  System will reboot & base station of the firmware will be updated after some time.

• New Firmware Update - where is the change log?

  I see that a firmware update was sent to my phone. However I can't find a change log. Where is it?

  Hello!

  HP and Microsoft has released an update (online) of the OTA for the X 3 elite on October 25, 2016. The update installs Windows Mobile 10 for the following versions:

  Firmware revision: 0002.0000.0014.0100

  Build of the OS: 10.0.14393.321

  Bootloader Version: 520101

  New features:

  Area	Description
  Display	High brightness Mode is activated when the brightness adjustment is suggested by default.
  Security	Reset functionality is enabled. However, the existing user must reflash phone with this software with Windows Device Recovery Tool (WDRT).

  The issues addressed (Items with * are fixed by OS updates):

  Area	Description
  Apps	App Instagram, have green lines during use is fixed.
  	Launch of view inconsistent HP on docking tools is fixed.
  Audio	Detection of the helmet is not reliable is fixed.
  Camera	Auto focus performance and stability in low light conditions are improved.
  	Model tapes preview screen is fixed.
  	Video recording after that tap put in pause/resume many times received message 'something went wrong' is fixed.
  Security	Blue BitLocker Recovery screen on reboot with active device encryption is fixed.
  User interface	Tap to wake up the wrong feature turn off screen is fixed.
  Hello Windows	IRIS is unblock, followed by sweeping to unlock quickly led to the prompt error is fixed.
  	Fingerprints and Iris being setup one after the other, one of them will not functional, is fixed. **

  Known issues:

  Area	Description
  Apps	Skype for business app can be run from external display of Continuum.
  Connectivity	Dock desktop LAN port of HP has no configuration of the user interface.
  User interface	Missing tiles with update settings. The user can go to the list of applications, press the settings icon and select PIN to start restoring the tile.
  	Tile 2 Messaging becomes white with update. Touch on the tile once it restores.
  Security	Too many failed unlock attempts, the device will be blocked for security reasons. User can unlock the unit to https://account.microsoft.com/devices.

  Thank you

• Workstation xw4600: upgrade CPU to Xeon X 3363 xw4600 - get error on POST firmware update

  Until classified Core 2 Duo 8400 3.0 Mhz CPU to Xeon X 3363 2.83 Mhz CPU using 'Sticker Mod' on X 3363.

  Works fine, but with an error at startup.

  Get this error on the POST:

  "1801 Microcode Update error-
  Missing or invalid processor update. Please
  Contact Hewlett - Packard Company for a new firmware
  Updated to support the new processor not. »

  The current version of BIOS is 1.34 which I think is the most recent.  How to upgrade the BIOS to the Stepping of the processor?

  Use a xw6600 or an update of the BIOS z400?

  I was able to get help on changing the Bios microcode for the Xeon x 3363 processor.

  Fans to run at normal speed now and start error "1801" disappeared.  Machine runs great!

• OfficeJet Pro 8620e ADF jam error after firmware update

  After you install the updated firmware from the touch screen of the printer, the printer restarts and now has an error that says "Original is caught in the ADF (ADF).  Open the cover of the ADF, remove and reload the original, then try again. »

  I went through all the steps to clear a jam from the ADF, but the opinion is persistent.  It is not (and was not before the upgrade) in the ADF at all.  Since this coincided with the update of the firmware, my suspiscion is that the firmware has not installed properly or something.  What am I doing here?

  This problem has been resolved using the printer instead of purchase and exchange for another.  I can hardly believe that the cables are working loose within two weeks, she was detained and then broke at the exact time that the firmware update has been completed.  In any case, the problem was solved by replacing the printer.  I don't have any feedback solutions until a month after I did.