TPT2 pointer moves then the bluetooth keyboard is in the range

Similar Questions

• My mouse pointer moves in the opposite direction, I intend when I use the touchpad on my laptop. It works fine when I use my docking station and external mouse. How can I fix it?

  I'm using Windows Vista with a Sony Vaio laptop.  At the office, I have a docking station with keyboard and external mouse.  Everything works fine with this Setup.  But when I unplug the docking station and use the touchpad on the laptop, my mouse pointer moves in the opposite direction, that is my intention.  I move my finger and the pointer down.  I move to the right and the pointer goes left.  How can I fix?

  Go to start /Control Panel, and then double-click the icon '' mouse. '' When this window opens, select the tab "Touch Pad" at the top. There's a box near the bottom called "Touch sensitivity", click on that. Change the settings a little bit lower than what they are currently at.

• ProBook 450 G1 - pointer moves on the screen by itself

  We have a user with a G1 450 ProBook, who notes that his mouse pointer will periodically move on the screen when she has no control of the pointer, requiring a reboot to fix the problem (it uses only the touchpad and does not use a mouse.) We updated the Synaptics Pointing Device driver directly on the site of HP v17.0.8.3 August 19, 2013 at v17.0.18.8 November 15, 2013. This has not solved the problem and we are looking for a solution.

  Thank you

  Thanks for the comments.  Problem was solved by replacing the physical keyboard.

• erratic uncontrollable movement on the monitor screen

  The erratic movement, as if everything on the screen moves vertically or rolling. It takes 15-20 minutes, then returns to normal. Meanwhile I can nothing except try to close the screen or shut down the computer. This happens several times during the day.

  Hi Sandra,.

  Here are a few things that you try.

  1. make sure that the wires to the screen of the central unit are connected correctly. (If you are using a desktop computer)

  2 start the computer in safe mode and try to correct the blink rate.

  Safe mode: http://windows.microsoft.com/en-in/windows7/start-your-computer-in-safe-mode

  Correct monitor flicker rate: http://windows.microsoft.com/en-in/windows7/correct-monitor-flicker-refresh-rate

  3. If the problem persists, try to uninstall and reinstall the adpaters screen.

  a. click Start , and then type DEVMGMT. SMC in the startup search box and press ENTER.
  b. click the forward arrow of graphics cards, make a right click on the video driver , and then click Uninstall.
  c. you may be prompted to uninstall the driver software, please insert a check mark to have the driver is completely removed from the system.
  d. restart the computer.

  Windows will automatically try to install the video drivers. If this isn't the case, please visit the computer manufacturer to download the latest display drivers.

  4. try to run a full scan on the computer to ensure that it is virus-free.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Just to check if the monitor is defective:

  Press the menu button on the screen and bring up the onscreen menu. If this menu moves then the problem may be with the monitor.

  Hope this information is useful. If you have any questions, please let us know.

• How to get a light to point down to the ceiling

  I can't believe I'm asking such a simple question, but still after several years of use of EI, I still have trouble controlling the lights of EI. How to make Spotlight pointing directly at the ground to the ceiling, by changing his position and point of interest?

  Are there tips on how to control the lights in a smart way?

  Any help will be appreciated! Thank you!

  If you want spotlight to point downwards, then the X and Z values for position and point of interest should be the same. If the value of Z for point of interest is less than the z-value of the point of interest, then the light will point down from the world of the model. This is exactly the same as a camera.

• Spectrum 12 2 HP - 2 M7: my new HP Specter12 2-1 M7 gives me a keyboard illuminated with a black screen and then the mouse does not work.

  My new Hp spectrum 12 2 - 1 m7 detachable worked well the first four time I turned it on. Then I put in Google Chrome and it gave me the blue screen of death... I rebooted and then the mouse started working funny or the screen does nothing. I finally took the screen to uninstall Google Chrome, which really didn't help. If I get a black screen with a lit keyboard and sometimes I can get the screen but the mouse is pointing upwards. Help, please.

  You may have a hardware problem that appeared to be connected to Chrome install. You have a 1 year warranty.  > >Contact HP

• pointer does not move in the games full screen

  My pointer do not move in the games when they are full screen on windows 7. In windowed mode, it works but it do not fit with all the games because I can't scroll.

  I've updated all my drivers...

  It's a well known problem with Windows Vista, but it had an impact on many users... seemed random.  Microsoft produced a patch for Vista.

  http://support.Microsoft.com/default.aspx/KB/932653/en-us

  Windows 7 can get a similar fix in time.  In the meantime, it is possible to download the Vista fix & install it via a right click on the Setup file, clicking on properties, then the Compatibility tab and it runs as an application in Vista.

  Nu WinBreak.com - video game Fanblogging

• Iconia W700P - need to access bluetooth keyboard during the boot UEFI or need to boot from a USB

  Solved a problem, now face two other:

  The W700P will now boot from a DVD recovery Acronis TI, but to select the restore function (then the specific restore backup), it requires an entry for a keyboard. The Bluetooth keyboard supplied with the W700P does not work during the boot sequence. I prefer not to go out and buy a USB keyboard, but it is perhaps the only option.

  Or-

  The W700P boot from a USB key can stick? I read that this is impossible, but in looking at the Acer store, that's all they offer as recovery media for the W700P. I made a bootable USB key, when I bought the computer first, but I can't seem to start. All I get is repeated boot Acer screens, maybe he's trying different options in the boot order. I tried to change the order, put a password for boot and secure boot off, but I still have the same question.

  Any ideas?

  Solved once and for the moment! I now have a USB hub, USB, USB and DVD USB mouse keyboard (powered externally). Throw all these things on the machine, I was able to boot into the Acronis Recovery DVD, go to the menu and reinstall a previous backup of Windows 8.1.

• How re-pair the bluetooth keyboard & numeric keypad - he will not give me a pairing code.

  I'm having a problem, try to re - connect my Bluetooth keyboard and numeric keypad.  First my keypad has been properly installed and works fine, but then when I tried to add the keyboard that I clicked on the number pad icon again once and he gave me a code to enter, I canceled just thinking it was already installed and working, and I didn't need to do.  Big mistake!  Now I could not do re-paired again.

  After talking with a guy tech at Staples, I disabled bluetooth for my laptop completely and then distributed in the computer and re-enabled Bluetooth.  I was able to add my mouse still fine, but now the keyboard and the numeric keypad gives me the same error and won't let me pair.   The message is:

  Pairing failed.  An ocrred of error during the process of pairing with Microsoft Bluetooth Number pad.  Make sure that the device is discoverable, and then click Retry.

  Well, I did it several times but without success.  He won't give me a code for one of these pair again.

  I use Windows XP.

  Can anyone help?

  Thank you!

  Penny

  Hello

  You can try the solutions listed in the articles below and check if that helps.

  http://support.Microsoft.com/kb/838398/en-us

  http://support.Microsoft.com/GP/cp_keyboards_master#TAB0

  http://www.Microsoft.com/hardware/Bluetooth/connectionguide3.mspx

  http://www.Microsoft.com/hardware/support/Bluetooth/en-us/default.mspx

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A pointer that moves when the user navigates screen

  I have a screen that contains different fields/images. Some of them are focusable and others are not. Is it possible to print/display an arrow pointer that moves as the user moves the wheel?  And the arrow pointer can be on the oilfields focusable and non-focus when the user stops and wheel.  It's like the pointer inside of a browser (office or by phone).

  Is there a simple way to do this, or it will be complicated in a way...

  Thank you

  Man

  Complicated enough without doubt.

  You can override moveFocus() to set the position of the cursor. You need to avoid moving focusable developed by calling fields do not super.moveFocus (). If you want to set focus when you click, you could get the cursor position and then go the extra fields and call XYRect.contains(x,y) with their Field.getExtent ().

  When scrolling you have to make sure the cusror is visible by calling setVerticalScroll(), setHorizontalScroll(), or maybe just Screen.scroll ().

• My bluetooth keyboard is not associated to the computer even if the drivers are installed.

  Dear all,

  I have a DELL Bluetooth keyboard. I installed the drivers on my Windows 7/DELL Optiplex 760 machine. It works fine, but after reboot the system or restart the machine, my keyboard is not automatically pair with PC but ask a pairing code. While my Bluetooth enabled mouse would be automatically pair with the PC. Now, for the use of the Bluetooth keyboard, I have to 'remove the device' and then 'Add the bluetooth' device again if I want to combine the system manually. When installing Windows give me an ID typing in the keyboard using Bluetooth and then installs it.
  I want that my Bluetooth keyboard to fit automatically with the system at every start.
  Please notify.

  Hi Shoaib,

  I thank very you much for coming back to us with the State of the question.

  The cause of the problem could be due to signal interference from other devices near the computer wireless. When other devices operating in the same range of frequency as Bluetooth devices, then, there is signal interference and which will result in the problem of Bluetooth on the computer. Some of the features that interfere with the Bluetooth device are:

  1. phones that use the 2.4 GHz band.

  2. microwave oven.

  3 x 10 devices, such as those that control lighting automatic and universal remote controls.

  4. the networks that use the 802.11 wireless protocol. (These networks is also known as Wi - Fi networks.)

  Hope it will be useful.

• When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.

  When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.  How can I get the pen tool to release the anchor

  Try this.go in the menus. Select cc illustrator > preferences > display selection & anchor > then make sure the box "activate the rubber band for" the pen tool is not selected. Then press OK. It should work.

• Y at - it a keyboard shortcut to move to the next tab to the right or left of the current tab?

  In a group tab is there a keyboard shortcut to move to the next tab right or left; to scroll the tabs?

  I already know about ctrl-1 to 8

  You can also use Ctrl and Ctrl + Page Up and Page Down

  See also:

  • https://support.Mozilla.org/KB/keyboard+shortcuts
  • https://support.Mozilla.org/kb/mouse+shortcuts

• Open a new tab in Firefox 16.0.1 the focus is on the address bar, and then moves to the search box

  When I opened a new tab in Firefox 16.0.1 focuses on the address for a second bar or then the focus moves to the search input field. If I start typing something that fills the first character in the address bar, then the rest is typed into the search field.

  How the development of stay in the address bar according to previous versions, please?

  MacBook Pro OS X 10.8.2
  Firefox 16.0.1

  Thank you.

  Hello surfersteve1970,

  Check it in Safe Mode, select "start in Safe Mode" and see if it will be repeated, otherwise see: Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• A Bluetooth keyboard for iMac can be coupled to an iPad Air2 type near the airbook keyboard use?

  A Bluetooth keyboard for iMac can be coupled to an iPad Air2 type near the airbook keyboard use?

  Yes. iPads supports BT keyboards very well, including the Apple BT keyboard.

  Make sure that the keyboard is unpaired of any other device or computer before you try to pair it with the iPad.