EAS stopped?

Similar Questions

• Backup of the WSA * and restore *.

  Hello

  I'm trying to understand how we should maintain regular backups of a request for ASO and restore in case of data loss/server failure, etc..

  I read the Database Administrator Guide that says "to save and restore global storage applications, you must use manual procedures."

  In looking at Backup and Recovery Guide we explained that a backup of ASO method to stop the application and copy the relevant application files. It lists under "to back up a database of global storage:" but there is no corresponding section "restore."

  So - not - where can I find explanation of how restore a backup of ASO taken this way. For example, if I 'accidentally' delete the application and then try to copy the saved folder app back to where it was, EAS does not list the application even after refreshing the list of applications.

  What very obvious step I'm missing?

  I know I could do various export of data and recreate the DBs by MaxL and applications, but this seems a very random way of doing things. There are on Oracle RMAN, TimesTen it y ttBackup/ttRestore - what is the 'good' way to backup and restore on ASO?

  Thank you, Robin.

  There are two ways to do

  1. to restore the backup, the application and the database of EAS, stop the application or restore it

  2. restore the files to the correct location, and then of EAS make a creation of the application and it must acknowledge your application

  Note that if you remove the application, then restore, you will lose the security associated with the application and will have to rebuild.

• EAS server stopped

  Hi all

  After the upgrade to EMP 11.1.2.3 (from 11.1.2.1 via update), all worked well, including the Regional service server.

  I was able to connect to the Regional service through the http://server:10080/easconsole/console.html

  And I was able to connect to the EAS on this server.

  However, it suddenly stopped working. "Now, I get the"

  Error 404 - Not Found"screen when I try to log in to the URL.

  If I try to connect via the ADMINISTRATION Console, the Server service Regional seems to have stopped.

  When I connect the logical Web administration console, I see the EAS node in "Administrator" mode, while others are in OPERATION.

  Any suggestions?

  Re-configure the database of Regional service to solve the problem?

  Would it be because of the 17529887 fix, that I need to apply any other patch.

  Thank you

  To get the service of Regional work, you will need to install the patch of RTC on the same server as EAS, although there is no harm to apply both servers to keep everything in the same patch version number.

  See you soon

  John

• Cannot stop EAS

  Hi all
  
  I am unable to stop the Regional service.
  
  I stopped all services and I started up to Shared Services and I haven't started EAS but I am able to connect to the EAS. How is it possible? Even I haven't started the Essbase server.
  
  I tried to deploy it on the web application server, it gives the message "port number is use by another application. Please specify a different port number.
  
  Please advice how to kill the EA process in Linxu box.
  
  My EAS is on Linux and I use Hyperion 9.3.1
  
  Thank you and best regards,
  Konrad.

  Hey Sravan,

  with ps - ef | grep hyperion, process to find and kill the consequence.
  If you want to check what services are running on port, use netstat-a | grep 10080.
  If you are unable to kill him as normal, use a kill-9.
  If prior work does not restart the box.

• BlackBerry® Q10 E-mail stops to display a message / hub empty with EAS account and Outlook

  Have 2 accounts. A Regional, an outlook.com service. EAS was working fine until this weekend. This morning new e-mail is displayed in the Inbox. If I search, I get the message, then the phone is their reception.

  I tried the things:

  -removed and added the EAS account again, no change.

  -change the filter to "unread" - shows the emails, but not always all

  -electronic control the synchronization setting-it is defined on it, for the Inbox mailbox is checked - no change. tried toggling it, no change.

  -changed the synchronization of the mailboxes in each of them, without change.

  -display modified by single line or conversation, let it rebuild without change.

  Everyone try this and have similar results? Basically, the e-mail from Q10 worked very well, but at this rate, it is not usable.

  Solved the problem in safe cleaning of the device and setting things up again from scratch. Seems no other way to fix it.

• How can I get rid of the "improved" search and how can I stop the NAGs for updating other machines?

  This "improvement" can improve your 'bottom line', but nothing for ease of use. I have other personal computers that are now get the "update" NAGs... it would be nice if they had to stop.

  It's a different setting, you want browser.search.showOneOffButtons, that's a bit down the page of browser.search.hiddenOneOffs.

  Sorry, I meant do a right click. Make a right click option and select "toggle".

• The call of a Subvi without stopping the execution of the main thread

  Hello everyone, I have a rather simple demonstration VI, which opens a menu where the user can call a few screws, signal generation, reading and analysis, each contained in a Subvi and with their own front panel and chart controls. The idea is user just click a button and the required Subvi is in charge, I use a structure of the event to ease.

  Problem is, after I opened an option, said Subvi hogs the thread of execution and does not allow for new bodies until it is closed (this is inside a while loop it is so logical, I guess), the queue of events and the next before Panel charges only after that I have stop the Subvi. I would like to be able to simply open the front panels and let them run in parallel, without them in the meantime another at the end, is it possible?

  natasftw is right.

  A high school is a "hole" in your main panel.  You "insert" a separate VI in this 'hole' and then you see the Panel of VI inserted through the hole and mouse clicks through the hole of the Subvi below.

  You will need to run the Subvi separately, even if - by inserting just can't run.

  Aynchronous call will begin a Subvi running and then return to the calling thread with the Subvi running in parallel.

  You can then insert the Subvi in a secondary, or let it have its own window, as you choose.

  There are examples of both techniques.

• How to stop Windows Narrator.

  original title: Windows Narrator.

  Hello.

  How can I stop the start-up Windows Narrator please?

  Open Control Panel / ease of access Center and select "use the computer.
  without screen"remove the check mark to 'Tour' the Narrator

• Pavilion dv7 programs closing and opening at random, computer stops randomly

  I have a Pavilion dv7-6154ea running on Windows 7. I've had it for a year and a half now and I just encountered this problem (it started a few days ago).

  The problem is that some programs or files are opening and closing by themselves, randomly without doing me anything. Sometimes even whole computer stops himself. And it's not as if it crashes, it just closes programs in the usual way or stops normally (without any problem).

  I scanned the entire computer for viruses and it is clean. If the problem seems not be caused by a virus.

  One thing that I was doing at the same time when this problem occurred is switchable graphics mode in the BIOS change, dynamics on fixed, by following the steps in this link to The switchable Graphics Mode

  I have a built-in Intel GPU (that to speed up performance) and an AMD Radeon HD 6490 M GPU (that of better graphics) and I wanted to run the PC on the AMD because I think that the dynamic mode has not changed the GPU when I needded, for example for video games.

  However, after a day of opening/closing by themselves programs, I decided to return to dynamic mode, and nothing has changed, so maybe it's also not the cause of the problem.

  In any case, it seems too convenient that the problem happened right after I introduced the Switchable graphics in the BIOS mode, if I don't think it's a coincidence.

  Can someone help me? It becomes very awkward to have a program that I use at the moment of the computer closa.

  Thank you

  sthri,

  It doesn't sound like it's a virus, but it could also be the keyboard.

  Go to start

  Type ease.

  Press enter

  Go to the bottom and click, facilitate the use of the keyboard.

  Check all the boxes and click OK.

  The keyboard will not work, but move and open programs as you normally use the computer and see if you get any errors.

  It is a shot in the water.

  By clicking on the White Star congratulations on the left is a way of saying thanks!

  I would like to know how everything goes.

  Nice day.

• How can I stop magnifying glass initialization at startup?

  I tried to use the magnifying glass and how to stop it now.  The help function doesn't seem to me be much help.

  Open the control panel. (Start > Control Panel).

  Click on "ease of access".
  Under "Ease of Access Center", click "optimize Visual Display".
  Make sure that the box for "Enable on the magnifying glass" is not checked.
  Click "Save".
  The microscope should run is no longer automatically at startup.
  Best wishes
  BookwormDragon

• Narrator starts every time that I reboot or close and open my PC, how can I stop the start Narrator?

  Hi, I have problems with my PC (Windows Vista) mothers. Margot opened the narrator and now it starts automatically when it restarts or logs and new. How can she stop it? I tried msconfig but can't find it.
  It is very annoying as Margot does not use it and need to close whenever it connects. I tried everything to stop it in the help files.
  Thank you for your time, Kaye Young... :)

  Go to control panel > accessibility > ease of access Center

  Under explore all settings, click on use the computer without a display.

  Clear the check box turn on Narrator and click Save.

• How to stop the windows Magnifier to start automatically?

  Whenever I turn on my computer, the windows Magnifier start automatically and I can't seem to stop at startup

  Hello

  Click on start - go to the ease of Panel - easy access - from the center of control - make the computer easier to see - now uncheck turn on Magnifier - to finish click on apply.

  http://www.Vistax64.com/tutorials/125037-Magnifier-turn-off.html

  also read the tutorial above while turning the magnifying power.

• Stop Windows Narrator and on the keyboard of the start screen

  Can someone please help me Narrator windows STOP and keyboard on screen running every time that I flash to the top of the computer, troubleshooting tells me how to do their job, but I DO NOT WANT THEM to WORK

  all advice welcome

  Hello

  It will show how to control those:
  How to activate the Narrator or disable in Vista http://www.Vistax64.com/tutorials/124575-Narrator-turn-off.html how do I turn on the Magnifier On or Off in Vista
  http://www.Vistax64.com/tutorials/125037-Magnifier-turn-off.html

  How do I change the keyboard to the screen on or off in Vista
  http://www.Vistax64.com/tutorials/72733-screen-keyboard.html

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  How to enable Windows features turn on or off in Vista
  http://www.Vistax64.com/tutorials/67732-Windows-features.html

  Disable ease of access button on the Vista login screen
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-ease-of-access-button-on-Vista-logon-screen/

  Ease of access Disabler - free - a small program that shows how disable the annoying ease of access button on the
  Vista login screen.
  http://www.Softpedia.com/get/tweak/system-tweak/ease-of-access-disabler.shtml

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to stop the Magnifier program activation at startup

  original title: I want to delete a "program".

  Forgive me for the use of terms laymans.

  Today, I see that on a user account Magnifier is activated at startup (log - on). I don't know how to make this stop. I tried to do something and got a message saying "disable permissions that inherits. I have some research here and "done something" according to a help page for Windows XP. I probably did more harm than good.

  I would like to delete the program, but it is not listed in Add/REMOVE programs (or is to REMOVE/CHANGE).

  Should I just delete the user account and start over?

  In addition, it is a fact that Vista does not automatically like XP restore points don't? Under Vista you must manually perform a restore point? In other words, on the XP computer I go to system restore and try to fix this mess. On Vista, I have found that "system restore." I have found where it is said today to a restore point, can not choose 3 days ago... because I have no previous restore points. I so widows updates

  We just got this PC and I am trying to set up for the family.

  Thank you.

  Go to start / Control Panel / ease of Access / facilitate the expect to see / and uncheck the box to turn on the Magnifier.  If this resolves the problem in this account, go to start / search box and type msconfig.exe and enter and then double-click on the program icon that appears.  Go to the starup tab and see if something related to ease of access or your magnifying glass is included - if so, uncheck the box to prevent it from running at startup and that should fix the problem.  If you can't find any such program, go to the services tab and look for the same thing.  If you uncheck the box, so it does not start at startup and that should fix the problem.  Here is an article on how to disable the Vista Magnifier that should work in the world and for all accounts: http://www.vistax64.com/tutorials/125037-magnifier-turn-off.html.  I suspect that this will do the trick.

  If none of these options works, you can always consider the account as a corrupt user profile and fix it usinghttp://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.

  =============================================================================================================================

  Like XP, Vista DO restore points do auto - there just need to be told to do. http://www.Vistax64.com/tutorials/169523-system-restore-task-change-automatic-restore-point-schedule.html orhttp://www.howtogeek.com/howto/windows-vista/change-how-often-system-restore-creates-restore-points-in-windows-vista/ (this second one is a little easier to follow).

  To find the system restore, go to start / Control Panel / backup and Restore Center / and to the left are two options - one to do a system restore and the other to create a restore point or change the restore point settings.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• computer does not stop the on-screen keyboard. It is whenever I log on my profile and will not stop. How do I stop?

  computer does not stop the on-screen keyboard.

  http://www.Vistax64.com/tutorials/72733-screen-keyboard.html

  Read the tutorial above.

  You can prevent the Visual keyboard facilitated access to automatically
  When you load Windows by disabling "use on-screen Keyboard.
  checkbox on the page "Use the computer without a mouse or keyboard" in the
  Ease of access Center.

  Open Control Panel > accessibility > Ease of Access Center > use the computer without a mouse or keyboard.

  See you soon.

  Mick Murphy - Microsoft partner