EBS 12.2.4 on 12 c RAC EXADATA

Similar Questions

• 11 GR 2 CARS vs.  11 GR 1 material RAC to EBS R12.1

  Hi hussein/helios
  
  
  We have just started creating CARS for 11 GR 1 material - EBS R12.1 where we met a lot of problems :(
  Then here's the client asking for new requirements. Instead of 11 GR 1 material, her force us to upgrade to DB 11 GR 2 and then BECAUSE he huhuhhu
  
  Y at - it notes metalink separated for installation of the EBS R12.1.1 - 11 GR 2 - RAC? agains R12.1.1 EBS - 11 GR 1 RAC matter?
  
  Kindly give me the commentary on this configuration/configuration please...
  
  
  Thank you very much
  
  Ms. K

  Hello

  Refer to the last doc for the GR 11, 1 material doc (doc contains links to all versions of Oracle database that can be configured with R12).

  Thank you
  Hussein

• the ebs 11.5.10.2 to 12.1.3 on IBM AIX 64 upgrade

  Hi experts,
  
  We have ebs 11.5.10.2 currently, simple installation (db levels and applications on the same node) node
  We intend to upgrade to the latest version 12.1.3 on 11.2.0.3.0 RDBMS.
  
  I need your help for the following queries;
  -is it possible to configure the ebs (levels of db and apps) using RAC (only available to 2 nodes, each node must hold levels db and apps?)
  -What is the required minimum nodes if I deploy on my ebs environment rac?
  
  could you please help me with the docs needed to deploy a successful upgrade?
  
  Thank you.

  the current environment of EBS is IBM AIX 64 single node installation.
  the new topology must include 2 nodes with IBM AIX 64 > holding the DB as RAC level
  and the application layer should be migrated to Linux 64.

  In this case, you do not need to migrate the database and you just need to use a different OS for application-level nodes.

  the measures on the current node,
  1 - upgrade 9.2.6 to 9.2.8 DB layer
  9.2.8 to 11.2.0.3 DB layer 2 - upgrade
  3 - passage of the application layer, of 11.5.10.2 to 12.1.1
  4 - crossing the 12.1.1 to 12.1.3 App

  Sounds good.

  I will later propose the db for oracle RAC on a new nodes with the same IBM AIX 64 platform diffenet
  5 - Install the grid and the db on the new nodes
  6 - import the Pb of the old node upgraded to the cars db

  I still need to read good to find the best way to go through a successful upgrade.

  Once you upgrade 11i to 11.2.0.3 data base, lay the R12 software on new Linux machines and complete the 12.1.1 upgrade. Then upgrade to 12.1.3 release. Once you are finished with the upgrade of the application migrate the database of unique to the RAC node.

  Thank you
  Hussein

• Login page appears no not after cloning.

  Hello

  We have Oracle EBS 12.1.3 with database 10g RAC on RHEL.

  Recently, after cloning, we can not get the login page and the following error message appears: -.

  "Could not generate the redirect URL. "Exception: Oracle.apps.fnd.common.AppsException: oracle.apps.fnd.common.PoolException: Exception creating object that can be aggregated.

  Please guide in problem solving.

  Thanks in advance

  Are there errors in the database log files?

  Please check the files of application log for more information on the error-(Doc ID 1964851.1)

  Please also see (Doc ID 1598680.1) and (Doc ID 1626838.1).

  Thank you

  Hussein

• Number of login page

  Hi all

  We run 12.1.3 (with US + AR Lang) with 11.2.0.3 DB on EL 6.

  We must go no to rac RAC...

  only a node not rac ebs.

  befor moving to the rac, functioned well as login page of English and Arabic is coming and the user can access and launch form etc.

  After a migration successful cars online, English behaves as expected but problem with Arabic, login page is coming and visible
  List of responsibilities, but when click on any of the form, he come and go immediately.

  I tried running autoconfig on all DB and knots APPL... it is successful.

  has run compiled adadmin forms and jsp, JAR generated...

  Nothing very interested DB file alert nor invalid objects.

  ora_nls10 is located on the path.

  Hello

  When no CARS migration of CARS you run perl cr9idata.pl? and it has worked successfully on both the DB node?

  Check below if working in you case.

  How do I solve the APP-FND-02950 starting forms by NLS language ( Doc ID 1061865.1 )

  regds,

  D<>A

• Re: cloning R12 database with no CARS on ASM filesystem

  Hello
  
  I'm creating a clone (cloning fast) of an Oracle EBS system.
  
  As our database (non-RAC) is on ASM, I am looking for a note describing the cloning of a database on the ASM.
  
  Kind regards.

  I'm looking for a note describing the cloning of a database on the ASM.

  through documents below, hope this helps.

  230672.1: cloning Oracle Applications Release 11i with rapid Clone
  216664.1: FAQ: cloning Oracle Applications Release 11i
  406982.1: cloning of the Oracle Applications V12 with rapid Clone
  559518.1: cloning of Oracle Applications V12 with rapid Clone CARS enabled systems
  783188.1: certified Oracle RAC Oracle E-Business Suite cloning scenarios
  394448.1: getting started with the application Management Pack for Oracle E-Business Suite

  If above does not help you, then send me email.we have same type of environment (not cars but uses ASM), send me your email, I will pass on the processes of cloning.

• Please give your opinion

  Hi all
  
  I get to level my r12 ebs 12.0.6 to ebs r12 12.1.1 on environment RAC OUL5x64.
  2 middleTiers and 2dbTiers.
  the upgrade takes long enough.
  
  Issues related to the:
  When finishing upgrade on the first level medium (12.1.1) and ensuring that everything is in place and functioning.
  what I would do is to clone the first level of way for the second level of way (not upgrade the average second level).
  I think it will save me a lot of time and avoid a lot of headaches patching.
  Please give me your impressions on this method.
  
  Kind regards
  Tom

  Tom,

  If this path seems valid to me, I think it is not supported by Oracle. With the unified concept of APPL_TOP, you should have identical copies of files on both nodes of application layer, but again I think not that it is supported (connect an SR to confirm this with the support of the Oracle).

  In my view, it is not easy with your current configuration to have an identical copy (a cloned instance) to estimate the time of upgrade. However, you can review the documents referenced in the following thread to reduce the blockage time.

  How can we have reduced the time to fix for u6394500.drv
  How can we have reduced the time to fix for u6394500.drv

  Kind regards
  Hussein

• Combined for the subtraction?

  I'm having some trouble of mind block with release an integer into a clean set of rows in SQL. Essentially, I in the case of "I need to find where to get 1000 coins. I have a list of 20 suppliers all with different amounts in the warehouses. "Starting with the least expensive, how can I disseminate these." I was not able to find the best way to describe so I think just one example best costumes as below.

  WITH PURCH_SOURCE AS (
  select 'WICK' PURCH_SOURCE, 0.001 PRICE, 123 QTY_ON_HAND, 4343 QTY_TO_FULFULL from dual UNION ALL
  select 'CHN' PURCH_SOURCE, 0.101 PRICE, 2190 QTY_ON_HAND, 4343 QTY_TO_FULFULL from dual UNION ALL
  select 'US' PURCH_SOURCE, 0.041 PRICE, 9 QTY_ON_HAND, 4343 QTY_TO_FULFULL from dual UNION ALL
  select 'CAN' PURCH_SOURCE, 0.011 PRICE, 32 QTY_ON_HAND, 4343 QTY_TO_FULFULL from dual UNION ALL
  select 'WRT' PURCH_SOURCE, 0.071 PRICE, 5609 QTY_ON_HAND, 4343 QTY_TO_FULFULL from dual UNION ALL
  select 'BELG' PURCH_SOURCE, 0.891 PRICE, 12 QTY_ON_HAND, 4343 QTY_TO_FULFULL from dual
  )
  select PURCH_SOURCE, PRICE, QTY_ON_HAND, QTY_TO_FULFULL from PURCH_SOURCE
  order by price asc
  

  I want the output to look like this:

  WITH PURCH_SOURCE AS (
  select 'WICK' PURCH_SOURCE, 0.001 PRICE, 123 QTY_ON_HAND, 4343 QTY_TO_FULFULL from dual UNION ALL
  select 'CHN' PURCH_SOURCE, 0.101 PRICE, 2190 QTY_ON_HAND, 4343 QTY_TO_FULFULL from dual UNION ALL
  select 'US' PURCH_SOURCE, 0.041 PRICE, 9 QTY_ON_HAND, 4343 QTY_TO_FULFULL from dual UNION ALL
  select 'CAN' PURCH_SOURCE, 0.011 PRICE, 32 QTY_ON_HAND, 4343 QTY_TO_FULFULL from dual UNION ALL
  select 'WRT' PURCH_SOURCE, 0.071 PRICE, 5609 QTY_ON_HAND, 4343 QTY_TO_FULFULL from dual UNION ALL
  select 'BELG' PURCH_SOURCE, 0.891 PRICE, 12 QTY_ON_HAND, 4343 QTY_TO_FULFULL from dual
  )
  select PURCH_SOURCE, PRICE, QTY_ON_HAND, QTY_TO_FULFULL,
  CASE QTY_ON_HAND 
  WHEN 123 THEN 123
  WHEN 32 THEN 32
  WHEN 9 THEN 9
  WHEN 5609 THEN 4179
  ELSE 0 END  QTY_TO_TAKE
  from PURCH_SOURCE
  order by price asc
  

  Please excuse the exits hard but code run corresponds to what I hope to expect.

  Ideas, I've tried:

  In my view, that it is can be accomplished with the WITH recursive clause or some form of LAG (QTY_TO_FULFILL - QTY_ON_HAND) and have it tumble down.

  Something like below but I don't know how make the function analytical in use the 'previous' value is calculated just.

  WITH PURCH_SOURCE AS (
  select 'WICK' PURCH_SOURCE, 0.001 PRICE, 123 QTY_ON_HAND, 4343 QTY_TO_FULFULL from dual UNION ALL
  select 'CHN' PURCH_SOURCE, 0.101 PRICE, 2190 QTY_ON_HAND, 4343 QTY_TO_FULFULL from dual UNION ALL
  select 'US' PURCH_SOURCE, 0.041 PRICE, 9 QTY_ON_HAND, 4343 QTY_TO_FULFULL from dual UNION ALL
  select 'CAN' PURCH_SOURCE, 0.011 PRICE, 32 QTY_ON_HAND, 4343 QTY_TO_FULFULL from dual UNION ALL
  select 'WRT' PURCH_SOURCE, 0.071 PRICE, 5609 QTY_ON_HAND, 4343 QTY_TO_FULFULL from dual UNION ALL
  select 'BELG' PURCH_SOURCE, 0.891 PRICE, 12 QTY_ON_HAND, 4343 QTY_TO_FULFULL from dual
  )
  select PURCH_SOURCE, PRICE, QTY_ON_HAND, QTY_TO_FULFULL,
  LAG(QTY_TO_FULFULL - QTY_ON_HAND || '   ('||QTY_TO_FULFULL ||' - '||QTY_ON_HAND||')') OVER (ORDER BY PRICE ASC) QTY_TO_TAKE
  from PURCH_SOURCE
  order by price asc
  

  At this point, I've been watching this one some time and I am looking for any help or suggestion to point me in the right direction.

  Params of the environment:

  Oracle RAC Exadata 1/8th (2 cases)

  Oracle 11.2.0.4

  Enterprise Edition

  Thanks for your time as always.

  Hello

  Developer2Be wrote:

  I'm having some trouble of mind block with release an integer into a clean set of rows in SQL. Essentially, I in the case of "I need to find where to get 1000 coins. I have a list of 20 suppliers all with different amounts in the warehouses. "Starting with the least expensive, how can I disseminate these." I was not able to find the best way to describe so I think just one example best costumes as below. ...

  Do you need to get 1,000 songs?  In the sample results, you seem to 4 343 parts.  Do you really have this number stored on each row in the purch_source table?  That seems like a very bad design.  As the number you get to need is not an attribute of the source, I don't think it belongs in the purch_source table at all.  What will you do if different lines have different values for qty_to_fulfull?  The query below takes the highest value.

  You have 20 suppliers, or you have 6?

  I think you want something like this:

  SELECT qty_to_fulfull, purch_source, price, qty_on_hand

  BIGGER (LESS (qty_on_hand

  qty_on_hand

  + MAX (qty_to_fulfull) ON)

  -SUM (qty_on_hand) (ORDER OF PRICE

  purch_source

  )

  )

  0

  ) AS qty_to_take

  OF purch_source

  ORDER BY price

  purch_source

  ;

  When 2 or more rows have exactly the same price, the above query uses the first purch_source (in alphabetical order) first, but you can use anything you want to as a tiebreaker.

  Thanks for posting the sample data in a usable format; This is really useful!

  You were on the right track, thinking about analytic functions for this.  You can use the OFFSET to get the total amount of 2 lines, but, in this problem, you need to get the total amount of all the lines so far, not TÉU 2; in other words, you need a running sum, what does the SUM function analytical.

• Use of indexes is not recorded in v$ object_usage...

  Hi all
  
  A few days ago, I posted a question to see if table scans / index deemed "used" index followed its use.
  
  Now I have a bit of the opposite question: I can't seem to get clues to "confess" v$ object_usage they been used!
  
  I tried this on two systems: a quarter-rack race Exadata V1 11.2.0.2 BP7 and a 11.2.0.3 (vanilla) running on AIX 5.3
  
  I can't make it work on either, despite the fact that I have activated it for 900 non-unique index on the Exadata machine and 300 on the AIX 5.3 database. The two are producing, so I expect high activity levels.
  
  That's what I did. Maybe I did something wrong. Surely that I did.
  
  The control of its use on the index WE - I did yesterday
  

  ALTER INDEX schema1.decentsizedtab_nu-idx1 MONITORING USAGE;

  Find the name of owner or table on which the index is based. When I run the present, nothing crazy is returned. It is a unique, valid, index that has not been analyzed since June 2010. It is NOT partitioned, NOT temporary and NOT invisible. Segments were created for the index.
  

  SELECT owner, index_name, index_type, table_owner, table_name, table_type, uniqueness, status, last_analyzed, partitioned, temporary, global_stats, visibility, segment_created
  FROM dba_indexes
  WHERE owner = 'SCHEMA1'
  AND index_name = 'DECENTSIZEDTAB_NU-IDX1';

  Determine the columns in dba_ind_columns
  

  SELECT index_owner, index_name, column_name, column_position
  FROM dba_ind_columns
  WHERE index_owner = 'SCHEMA1'
  AND index_name = 'DECENTSIZEDTAB_NU-IDX1';
  
  SCHEMA1 DECENTSIZEDTAB_NU-IDX1  COL_1               1
  SCHEMA1 DECENTSIZEDTAB_NU-IDX1  COL_2               2
  SCHEMA1 DECENTSIZEDTAB_NU-IDX1  COL_3               3
  SCHEMA1 DECENTSIZEDTAB_NU-IDX1  COL_4               4

  So you would think that would use the index, especially if I give this move a bit to use it...
  

  EXPLAIN PLAN FOR
  SELECT /*+ INDEX (schema1.decentsizedtab_nu-idx1)*/ col_1, col_2, col_3, col_4
  FROM schema1.decentsizedtab;

  The plan of the explain command shows that we use the DECENTSIZEDTAB_NU-IDX1 index.
  

  SELECT * FROM table(DBMS_XPLAN.DISPLAY);
  
  Plan hash value: 1798057294
  --------------------------------------------------------------------------------------------
  | Id  | Operation                    | Name        | Rows  | Bytes | Cost (%CPU)| Time     |
  --------------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT             |             |   145K|  2138K|    97   (2)| 00:00:02 |
  |   1 |  INDEX STORAGE FAST FULL SCAN| DECENTSIZEDTAB_NU-IDX1|   145K|  2138K|    97   (2)| 00:00:02 |
  --------------------------------------------------------------------------------------------

  OK, so we're going to execute the statement and see if the index is used...
  

  SELECT /*+ INDEX (schema1.decentsizedtab_nu-idx1)*/ col_1, col_2, col_3, col_4
  FROM schema1.decentsizedtab;
  
       145721 rows selected.

  Once this is completed, we will check the object_usage view $ v to see if it has registered using the index
  

  SELECT * 
  FROM v$object_usage;
  
  No rows returned.

  LOL. Nope. Bitch index tracking! *
  
  I have not considered the fact that exadata was involved (unloading, etc.) to perform this operation somehow, but as I said, I tried this with an Oracle database restart a single instance and I see the same thing.
  
  Thoughts? Ideas? Critical? Personal insults?
  
  Mark

  marksmithusa wrote:
  I noticed that MOS Note 261756.1 gives to think you have to be connected to the schema owner to display the results.

  It is a real pain because I have 50-60 patterns in the Exadata database AND I am logged in as SYSDBA - surely, I should be able to see everything in v$ object_usage?

  Here is the definition of v$ object_usage

  select io.name, t.name,
         decode(bitand(i.flags, 65536), 0, 'NO', 'YES'),
         decode(bitand(ou.flags, 1), 0, 'NO', 'YES'),
         ou.start_monitoring,
         ou.end_monitoring
  from sys.obj$ io, sys.obj$ t, sys.ind$ i, sys.object_usage ou
  where io.owner# = userenv('SCHEMAID')
    and i.obj# = ou.obj#
    and io.obj# = ou.obj#
    and t.obj# = i.bo#
  

  The predicate: io.owner # = userenv ('SCHEMAID') is that which limits the output to the current user.
  If you can connect with a login adapted, you could create another view that eliminates this predicate, perhaps adding to the selection in the io.owner list #, or even join user$ on io.owner # u.user = #, for example

  select u.name, io.name, t.name,
         decode(bitand(i.flags, 65536), 0, 'NO', 'YES'),
         decode(bitand(ou.flags, 1), 0, 'NO', 'YES'),
         ou.start_monitoring,
         ou.end_monitoring
  from sys.obj$ io, sys.obj$ t, sys.ind$ i, sys.object_usage ou, sys.user$ u
  where i.obj# = ou.obj#
    and io.obj# = ou.obj#
    and t.obj# = i.bo#
    and u.user# =  io.owner#
  ;
  

  Concerning
  Jonathan Lewis

• Correlation between the cpu load and the queue

  We are seeing cases where our CPU usage is less than 50%, but we babysit run queues of more than 10 minutes. I expect a large queue if we were see a greater use of the CPU, but I'm unable to correlate a large queue with low CPU usage. Has anyone else seen a condition like this or have any ideas. Database is 11g RAC Exadata X 2 full rack. We use the ORM to manage the resources of the processor as well.

  It is an informative read: http://shallahamer-orapub.blogspot.com/2010/07/os-cpu-run-queue-not-what-it-appears.html

• Migration to exadata - DB_BLOCK_SIZE

  Hello
  We plan to move our DWH, 5 tera 11 GR 2 database running on a Linux machine rac exadata 1/4.
  We are running with 32 K block size.
  Our statements must use FTS, and index number is low.
  We want to get your advice if we stay with the size of 32K block on the exadata machine or install on exadata database machine with 8K block size.
  
  Thank you

  If you are able (have the time and resources available), test the 8 KB and 32 KB would be the best thing.

  I've never tested (all my clients use 8 KB blocksize), but I'd be surprised if 32 KB would make much difference in performance.

  So if you have the opportunity, I would stick with 8 KB on exadata.

• Convert the EBS for one example at RAC

  Hi all

  EBS R12.2.4

  11 GR 2

  OL 6.5

  I want to convert our EBS instance to RAC.

  Can you share me documentation on how to convert a single instance of the EBS R12.2.4 CARS?

  I need to convert both the apps and the level of db? or the level of db only?

  Kind regards

  JC

  Hi Vishnu,

  I ran the 2nd step: but received the error

  rman target $ /.

  Recovery Manager: release 11.2.0.3.0 - Production on Tue Feb 23 11:42:11 2016

  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-00554: initialization of the package manager internal collection failed

  RMAN-04005: target database error:

  ORA-21561: OID generation failed

  Kind regards

• Need help on design for 2 EBS with RAC environment

  Hi all

  We currently have 4 servers with 256 GB of RAM, 1 TB HDD and 8 cores. Our requirement is to configure two EBS 12.1.3 with DB RAC environment. We want to take advantage of these 4 server to accommodate the two EBS since the configuration of the server (application server 2 with HA and 2 DB for RAC servers) are quite high, because the concurrent users on each EBS are not more than 200.

  So our problem is as below:

  Say we have these server 4A, B, C and D. We have 1 create multi instance node, with DB on server A & B (CARS) and application on the server C & D. Now if we want to install the second case, with the same architecture on the same servers that we do.

  (1) use the same grid infrastructure and create DB for 2nd instance cluster even. (how?)

  (2) install another grid infrastructure and create totally another cluster for this instance.

  You can do the following for a case of BSE, and perform similar operations for a 2nd on the same grid. Check after the link. He detailed information EBS on RAC Setup

  Install EBS R12 on 11g RAC Oracle ASM

  
  

  High level steps are:

  
  

  • Install and Configure Grid Infrastructure on cluster 2 nodes.
  • Create the DATA starts EAM and FRA with a sufficient size.
  • Install theSoftware to the database of this Cluster Homeon.
  • Install the EBS by using a quick installation on the database node 1 (out of the BOX Non-RAC on 1 node installation
  • Install BSE using rapid installation on nodes of applications.
  • Convert the database of 11 GR 1 material not RAC RAC Database.

• Sign in URL EBS R12 opening when a RAC's DB Instance is down

  Hello

  We have 2 apps-tier and 2 instances of node rac node... which instance a DB is down, my url to connect ebs gives this error

  "Could not generate the redirect URL. Exception: oracle.apps.fnd.common.AppsException: oracle.apps.fnd.common.PoolException: Exception creating object that can be aggregated. "

  Why we are getting this error, even if we have another instance DB 2 available and running.

  In application.log, I see following error:

  Caused by: java.sql.SQLException: the network adapter could not establish the connection

  level applications sqlplus works fine and the connection to the instance DB 2.

  Not sure whats wrong. CUD someone please help. Currently the application is not accessible.

  Hello

  Can you please confirm if you have the installer as shown below note of load balancing:

  With the help of Oracle Real Application Clusters 11 g Release 2 with Oracle E-Business Suite Release 12 (Doc ID 823587.1)

  --> 3.8.2 together towards the top of the load balancer

  -Kj

• EBS R12.1.3 on the 12 c RAC database

  We are running EBS version 12.1.3 on RAC cluster for node 3 11 GR 2 and works well. We are currently working on upgrading our RAC database to 12 c.

  Looking at the Oracle support, I can see there are notes related to stamps of interoperability thus recommended on 12 c init parameters.

  I can't find any other relevant document where there are performance problems and possible solutions.

  I'm sure that the people would have taken this path... ghoulish someone please provide input as to what measures we should take to make sure that we don't encounter unforeseen problems.

  Know your opinion.

  TO THE

  I'm not aware of important performance issues at the top of the 12.1.0.1 of database with R12, and I believe that if you apply all the patches in the following docs, then you should be good. If you have specific concerns, please do not hesitate to share with us.

  With the help of Oracle 12 c version 1 Real Application Clusters with Oracle E-Business Suite Release 12 (Doc ID 1490850.1)

  Interoperability note EBS 12.0 or 12.1 with RDBMS 12cR1 (Doc ID 1524398.1)

  12.1.0.1 database with Oracle E-Business Suite certified

  https://blogs.Oracle.com/stevenChan/entry/12_1_0_1_db

  Thank you

  Hussein