EBS offline restore

Similar Questions

• I used download exec to install for FF & save on USB key to reinstall after a complete system restore last one I have is FF12 can do with FF27 or even 26?

  I'm used to be able to download the exec of set-up for FF and save it on a USB key to reinstall offline after a complete restore of the system. This is very useful. The last one I have is FF12, so after a restore, I now install FF12 so I can take care of tasks offline restore without having to resort to IE. When I go online I go from FF12 to the latest version. Is there a way I can save the exec of set-up for FF27 or even 26?

  Hello, you can download the offline full installer for your system https://www.mozilla.org/firefox/all/

• Restore the CBD

  Hello

  I took the backup of the CBD with RMAN for oracle 12 c. Please let me know how to restore the CDB.

  Thank you

  Siradji

  You can use the same commands to restore the entire CBD or DPS depending on your RMAN connection. If you have a full backup of the CBD, it will also inlcude all PDB.

  If a data file is missing, you can use the RMAN LIST FAILURE, FAILURE of ADVICE and the FAILURE of the REPAIR:

  For example:

  SQL> alter pluggable database pdb2 open;
  alter pluggable database pdb2 open
  *
  ERROR at line 1:
  ORA-01157: cannot identify/lock data file 29 - see DBWR trace file
  ORA-01110: data file 29: '/u01/app/oracle/oradata/cdb2/pdb2_1/ldata_01.dbf'
  

  [oracle@vm601 ~]$ rman target /
  
  Recovery Manager: Release 12.1.0.1.0 - Production on Mon Jun 29 18:46:31 2015
  
  Copyright (c) 1982, 2013, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: CDB2 (DBID=610855196)
  
  RMAN> list failure;
  
  using target database control file instead of recovery catalog
  Database Role: PRIMARY
  
  List of Database Failures
  =========================
  
  Failure ID Priority Status    Time Detected Summary
  ---------- -------- --------- ------------- -------
  8          HIGH    OPEN      29-JUN-15    One or more non-system datafiles are missing
  
  RMAN> ADVISE FAILURE;
  
  Database Role: PRIMARY
  
  List of Database Failures
  =========================
  
  Failure ID Priority Status    Time Detected Summary
  ---------- -------- --------- ------------- -------
  8          HIGH    OPEN      29-JUN-15    One or more non-system datafiles are missing
  
  analyzing automatic repair options; this may take some time
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID=46 device type=DISK
  analyzing automatic repair options complete
  
  Mandatory Manual Actions
  ========================
  no manual actions available
  
  Optional Manual Actions
  =======================
  1. If file /u01/app/oracle/oradata/cdb2/pdb2_1/ldata_01.dbf was unintentionally renamed or moved, restore it
  
  Automated Repair Options
  ========================
  Option Repair Description
  ------ ------------------
  1      Restore and recover datafile 29
    Strategy: The repair includes complete media recovery with no data loss
    Repair script: /u01/app/oracle/diag/rdbms/cdb2/cdb2/hm/reco_1473098899.hm
  
  RMAN> repair failure;
  
  Strategy: The repair includes complete media recovery with no data loss
  Repair script: /u01/app/oracle/diag/rdbms/cdb2/cdb2/hm/reco_1473098899.hm
  
  contents of repair script:
    # restore and recover datafile
    sql 'PDB2' 'alter database datafile 29 offline';
    restore ( datafile 29 );
    recover datafile 29;
    sql 'PDB2' 'alter database datafile 29 online';
  
  Do you really want to execute the above repair (enter YES or NO)?
  

• System update / installation in a freshly restored z60t 2511-EJG software

  Hello, is Ottorino.

  I ' ts good to know that such a forum exists.

  I hope to find the answer to a problem that I can't solve.

  I worked with my z60, running Debian Lenny and I almost forgot to winXP,

  with the exception of some applications that I really need (mostly Nokia PC suite). (The dual boot still worked very well).

  A couple of last week, I started XP, for my mobile phone backup and thinkvantage asked me for updates. I let the system to download a lot of patches and updates, but on reboot I got a lot of problems.

  I never managed to return to the status of previuos (working!).

  I have all my copies of backup (partimage), but nevertheless, I decided to buy the recovery CD set and start from scratch the whole thing.

  Therefore, I made the offline restore procedure to return the computer to factory conditions.

  Then I removed all of the things that I have no need (symantec, diskeeper lite, games, Messenger).

  After the reboot, I installed my antivirus and also launched a thinkvantage system update.

  After awhile, the thinkvantage system update responded a bit like 'nothing to upgrade' or more.

  I noticed that in Explorer (6.0), there was an icon thinkvantage (Installer): when you press it, a update/upgrade process began, but ultimately failed.

  I then googled around and I realized that the Installer software is no longer supported.

  While searching on Google, I let XP to download and install Service Pack 3.

  After a reboot, update system started by itself, tried to connect and download something (732,52 KB), it keep on downloading up to 42% and once again ended by saying "the sistem need not update/update" or similar.

  Then I tried to install a new version of system update (3.14), but before I installed the NET.framework 2.0 such as requested by lenovo, but without any improvement.

  Update system connects, start downloading and eventually stop on 42%.

  I would like to see as the stuff of thinkvantage functioning again, before installing debian.

  Any suggestion to create works of thinkvantage?

  Thank you very much

  Hi eheikell,

  Yes all that happened in the weekend.

  I really need the laptop this week, that's why I was in a hurry.

  Thanks for the information.

  I'll check the site in the coming weeks.

  Just for the records...

  I installed Ubuntu Intrepid ibex, yetesterday and installation was really child's play.

  Only a few adjustments to install the finger drive.

  If I think that thinkvantage has been designed to help users to...

• Unable to boot Windows 0xc0000008e (0xf7418cad, 0xf6fd27e4, 0x00000000) error

  Original title: 0xc0000008e (0xf7418cad, 0xf6fd27e4, 0x00000000)

  error blue screen... after updating the Bios of hp/support.  Impossible to reinstall, safe mode. computer restarts just in all the choices.  DiskPart/recovery Windows does not...

  Hello

  Method 1:

  Step 1:

  I suggest to do a Startup Repair in the Windows recovery environment and check.

  Please remove the external devices connected to your computer before the procedure.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Step 2:

  I also suggest to make a System Restore the Windows recovery environment (WINRE) and check.

  In this case, you will do what is called a 'offline restore'.

  Note: while in WinRE, System Restore is not able to create a restore to cancel before any restore point. As a result, undoing a rollback is not supported WinRE.

  To use the system restore in the WinRE, follow these steps:

  Start the computer by using the Windows 7 installation DVD.

  b. on the Windows Installer screen, click Next.

  c. on the screen to install Windows, select repair your computer.

  d. in the System Recovery Options dialog box, click Next.

  e. in the System Recovery Options dialog box, select the appropriate operating system and then click Next.

  Note: If the controller drivers are needed, click Load Drivers.

  f. in the System Recovery Options dialog box, click System Restore.

  g. in the System Restore dialog box, click Next.

  h. in her select a restore point dialog box, select a date and time from the list when the computer was working properly, and then click Next.

  i. in the disks to confirm to restore the dialog box, check that (C:) (System) is checked, and then click Next.

  the judge in the confirm your restore point dialog box, click Finish.

  k. in the System Restore dialog box, click Yes.

  l. the computer makes the appropriate changes.

  Mr. in the System Restore dialog box, click restart.

  n. after the computer restarts in Windows, in the System Restore dialog box, click close.

  o determine if the computer is working properly. If this does not work, repeat the previous steps and select a date and time earlier.

  If the steps do not hlp then I suggest to proceed to the next method and follow the steps.

  Method 2:

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  See also:

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

• NEST in Clone command error

  Hello

  Please help me in this matter. Get the same error when I clone every time.

  I clone a database with rman backup EBS. Restoration finished and when I try to change the name of DB using the NEST am getting an error. After that trying to open the database get error and it successfully opened before executing the command NEST when I open the database with resetlogs. but after running command NEST when I open error below is tried very hard but could not able to find the solution. Please help me in this.

  Error: ORA-01103: name "TESTDBA" in the control of the database file is not 'UAT '.

  Kind regards.

  T.A

  Hello

  Please see:

  Solving the problems of RAC RapidClone for Oracle Applications R12 (Doc ID 1303962.1)

  Section: Configure the primary Oracle Home

  HTH!

  Thank you &

  Best regards

• DataFile recovery not to repair corrupted block

  Hello
  Towing of data files are corrupt data block and recovery of files not repairing block corruption.
  

  sql 'alter database datafile 2, 8 offline';
     restore datafile 2, 8;
     recover datafile 2, 8;
     sql 'alter database datafile 2, 8 online';

  The media recovery complete successfully without warning.
  But, after recovery when I try:

   validate check logical datafile 8,2; 

  It shows again block corruptions. I tried several times to recovery, and the same appears when I query V$ database_block_corruption.
  I also tried the same thing with RMAN > failure of the repair and the result is always the same.
  
  I tried RMAN incremental and full after that it and two of them have not

   ORA-00600: internal error code, arguments: [17114], [0x2B58288E0BB8], [], [], [], [], [], []
  ORA-00600: internal error code, arguments: [17147], [0x2B58288E0BB8], [], [], [], [], [], []

  It seems that the data files are not recovered and block corruption after the restoration and recovery.
  
  An of this datafile is sysaux. and the version of DB is g 11, standard edition.
  

  BANNER
  Oracle Database 11g Release 11.1.0.6.0 - 64bit Production
  PL/SQL Release 11.1.0.6.0 - Production
  CORE     11.1.0.6.0     Production
  TNS for Linux: Version 11.1.0.6.0 - Production
  NLSRTL Version 11.1.0.6.0 - Production

  Thank you
  
  Published by: najet 11 June 2010 20:05
  
  Published by: najet June 11, 2010 20:11

  I suggest you to contact the Oracle Support

• Cold Oracle EBS backup and restore does not work

  Hello
  
  I made a backup with tar, while the database is open and not in mode archive (archivelog disabled) and restored on another machine.
  OS = AIX 5.3
  Oracle EBS 11.5.9
  9i database
  
  When I started the database I had errors.
  
  Is there a metalink document that will help me to recover the database?
  
  
  I followed the following Metalink:
  
  Database startup fails with ORA-01113, ORA-01110 errors [146039.1 ID]
  Common causes and Solutions in case of error ORA-1113 in backup & recovery [ID 183367.1]
  However, I note that the foregoing applies in the case of archivelogs = active
  My case: archivelogs = disabled
  
  SQL > startup mount pfile=/oracle/proddb/9.2.0/dbs/initPROD.ora
  ORACLE instance started.
  
  Total System Global Area 615482512 bytes
  Bytes of size 742544 fixed
  436207616 variable size bytes
  167772160 of database buffers bytes
  Redo buffers 10760192 bytes
  Mounted database.
  SQL > SELECT V1. FILE NO., NAME
  V $ BACKUP V1, V$ DATAFILE V2
  WHERE V1. STATUS = 'ACTIVE' AND V1. FILE # = V2. FILE NO.; 2 3
  
  no selected line
  SQL > restore database using backup controlfile until cancel;
  ORA-00279: change 3368247542 September at 10/02/2013 03:07:21 needed for thread
  1
  ORA-00289: suggestion: /oracle/proddb/9.2.0/dbs/arch1_637.dbf
  ORA-00280: change 3368247542 thread 1 is in sequence #637
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  Cancel
  ORA-01547: WARNING: RECOVER succeeded but OPEN RESETLOGS would get below error
  ORA-01194: file 1 needs a recovery more match
  ORA-01110: data file 1: ' / oracle/proddata/system01.dbf'
  ORA-01112: media recovery not started
  
  SQL > restore database using backup controlfile until cancel;
  ORA-00279: change 3368247542 September at 10/02/2013 03:07:21 needed for thread
  1
  ORA-00289: suggestion: /oracle/proddb/9.2.0/dbs/arch1_637.dbf
  ORA-00280: change 3368247542 thread 1 is in sequence #637
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  
  ORA-00308: cannot open archived log ' / oracle/proddb/9.2.0/dbs/arch1_637.dbf'
  ORA-27037: unable to get file status
  IBM AIX RISC System/6000 error: 2: no such file or directory
  Additional information: 3
  ORA-01547: WARNING: RECOVER succeeded but OPEN RESETLOGS would get below error
  ORA-01194: file 1 needs a recovery more match
  ORA-01110: data file 1: ' / oracle/proddata/system01.dbf'
  SQL > alter database open resetlogs;
  ALTER database open resetlogs
  *
  ERROR on line 1:
  ORA-01194: file 1 needs a recovery more match
  ORA-01110: data file 1: ' / oracle/proddata/system01.dbf'
  
  SQL > select HXFIL File_num, substr(HXFNM,1,40) filename, Type FHTYP, HXERR validity.
  FHSCN SNA, FHTNM TABLESPACE_NAME, status FHSTA, FHRBA_SEQ sequence
  x $ KCVFH;
  
  .....
  .....
  .....
  
  419 selected lines.

  981553 wrote:
  I understand that hot backups can be done with noarchivelog and data will be inconsistent.

  Fix.

  However, the database should not be able to recover some data are there in data files and commissioning normally.

  This is my question and my concern. I looked for Metalink and couldn't find anything about it.

  I want to start the database with all this that data is present after the backup. All the solutions for such a scenario?

  If you took an offline backup, you can recover the database to restore all the files and bring services up (without recovery is needed here).

  And, as you mentioned "hot backups can be done with noarchivelog and data will be inconsistent.

  Thank you
  Hussein

• EBS R12.2.4 db backup and restore

  Hello

  I need to make a database backup for security reasons. How I had to do in EBS? with expdp (.dmp) and a restoration with impdp (.dmp)

  or what is the process?

  Thank you.

  Luis.

  Hello

  Do not use the import/export for backup and restore. They are generally used to migrate a database to a new server or as an alternative to an upgrade of database.

  You must use RMAN after enabling archivelog mode.

  It allows you to perform backups hot, cloning of the database and many other things.

  If you don't/can't use it, you can make a cold backup of the database files.

  Kind regards

  Bashar

• Stuck on the backup to restore full hot in Oracle 9i EBS 11.5.10.2

  Legends of dear,

  I'm working on a restoration of my Prod of EBS 11i (11.5.10.2) Instance of Test data and DB version is 9i (9.2.0.6.0) - RHEL 3 32-bit

  1 installs all database files and archiving on Test Server logs in a place called/ERP/RMANBACKUPS.

  2. the file command was created from Prod to test and now the database is in EDITING mode.

  3. when I run the database restore, it says

  RMAN-06023: no backup or copy of datafile 3 found to restore

  RMAN-06023: no backup or copy of datafile 2 found to restore

  RMAN-06023: no backup or copy of datafile 1 found to restore

  My RMAN Configurations in a TEST instance

  RMAN > show all.

  RMAN configuration parameters are:

  CONFIGURE REDUNDANCY 1 RETENTION STRATEGY; # by default

  CONFIGURE BACKUP OPTIMIZATION # by default

  SET UP DEFAULT DISK DEVICE TYPE; # by default

  CONFIGURE CONTROLFILE AUTOBACKUP # by default

  CONFIGURE the FORMAT CONTROLFILE AUTOBACKUP FOR DEVICE TYPE DISK FOR ' / ERP/RMANBACKUPS/autobackup_control_file%F';

  SET UP THE DEVICE TYPE DISK PARALLELISM 1; # by default

  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default

  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default

  CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT ' / RMANBACKUPS/ERP/databasefiles_MASK ";

  RMAN configuration has not stored or default settings

  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default

  CONFIGURE the SNAPSHOT CONTROLFILE NAME to ' / ERP/oramasknew/maskdb/9.2.0/dbs/snapcf_MASK.f'; # by default

  RMAN configuration has not stored or default settings

  RMAN configuration has not stored or default settings

  Note: File system of Prod as the path of the data file is different, while the railways TEST of system files are different.

  Any kind of help would be very appreciated. Thanks in advance,

  Knockaert

  Much better.

  Run this;

  RESTORE ARCHIVELOG ALL;

  then try

  RECOVER THE DATABASE TO SKIP TABLESPACE "PAY_TX_DATA";

• What is the file of my Adobe Story project real offline and I can restore?

  I was offline for a while and I couldn't get my new synchronization scripts to the area of online projects. Then I "upgraded" in the same Adobe Story CC more I was running. In the online application old files became available, but the latest offline files are no where. Restored to the old com.adobe.AdobeStory.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 folder, but the application would not pass the sign-in Adobe cloud dialogue.  And now, whenever Adobe Story opens (online is now the default) it overwrites the content restored of the folder with the synchronized online content.

  Hello

  Can if it you please send us a mail to [email protected]? We will help you to extract your documents offline.

• EBS with NetBackup backup

  Hi experts

  I'm new to EBS, please I need help with this:

  I need to back up three servers EBS (Dev, Test, Prod), I ve installed Netbackup on these servers.

  But I do not know what files or directories should I back up?

  Also I don't know if I should stop the application first?

  What information should I give you lets see what configuration I have on these servers?

  DB 11 G 2

  EBS 12.1.3

  Thanks in advance

  JUDGE

  He has suggested you stop the application services layer before performing a backup. I can't talk about the latest features of NETBACKUP since I the have not used recently, but what I was doing before taking a backup offline demand full or level nodes then take incremental backups (on a Linux/Unix OS) online. If there are major changes to the application level (patching, upgrades... etc) you should take a full backup before proceeding with a task.

  What I would say to validate online apps backup is:

  -Run preclone on one of the instances of DEV

  -Take an online backup, the nodes of level application (s)

  -Make a backup of the database level one or more nodes

  -Restore the backup on one or several different nodes or about to different editing on the same server

  -Run postclone on the restored files

  -Validate your backup by accessing the application/database target

  Thank you

  Hussein

• Keeping EBS but stop generation of newspapers

  Hello
  
  We are running EBS 11.5.10.2 with DB 10.2.0.4. We have created a clone which is an exact replica of the production. The intention is to update this clone with newspapers in production on a weekly basis, so keep up to date. However, we do not want this clone to generate his own newspapers, and we cannot find a way to stop it, while the system is in place. Does anyone know how to keep the system in, but stop the generation of new logs? Thank you.
  
  LIA.

  Keep in mind that users won't get this copied PROD
  The main objective of this copy must be able to make clones without having to take real PROD offline, hence the need to keep it updated with newspapers

  It is clear now, and what I mentioned in my previous answer should be useful.

  All you need to do is:

  -Make a backup of the source PROD/application database
  -Restore that backup on the target one or several nodes PROD
  -Open the database in montage mode
  -Apply the archivelog files
  -Closing of the database

  Now, whenever you need to open this database to run preclone, taking a backup of the database first and then open it and run preclone. Once you are done with preclone, close the database and remove all the data files, and then restore the files you took before opening the database and accompany the steps mentioned above.

• lost or stolen iPhone. It is w / 'Find my iPhone', later received email that it has been found. No call and impossible to recover, now phone is in offline mode. I am leasing through the iPhone upgrade program. Help, please.

  6 sec more lost/stolen iPhone. Turned on the 'lost' Mode and displays the number to call if found on-screen. It is w / "Find my iPhone", went up, no response from any home in the area. Later received an email that it was found, still no call to the number on the screen. Several unsuccessful attempts to get it back, now the phone is in offline mode and says that the history of the site is not available. I left a note on all the doors in the place indicated on the "find my iPhone" describing my phone lost and left a number to call. I am leasing through the iPhone upgrade program. Help, please.

  There is no way to locate now, unless the one who found it exerts a force on you contact on this number you posted

  The good news is, since you have find my iPhone, they will not be able to reuse the phone even if they are trying to restore. Unless they know your password, or you have a valid proof of purchase AGFI won't be deleted.

  So if the person who found the phone knows about it, he or she would rather go back because it would be of no use to them.

• Restoration of a backup profile emails

  I keep all my emails deleted in a folder called 'deleted items '. I use an IMAP server. Somehow, I lost all my emails deleted for the period 01/04/2015 - 17/07/2015. However, I made a backup of my profile TB on 7/2 for most of the emails should be in this backup. How can I get just the emails from the folder "Deleted items" back? I don't want to restore the whole profile, only the emails from this folder. Thanks for your help.

  If there is nothing to get in the "Deleted items" folder in your backup, you can use this module to import the file.
  https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

  Note that this will only work if you have enabled synchronization for this folder in your account settings, so there is an offline copy of all messages on your local disk.

  You must restore these messages in a folder in your "Local folders" account first and then download them again to the IMAP server.