ECO Charge mode can not be disabled on Satellite P50 - A under Win 10

Similar Questions

• Thunderbird: In write mode can not find the tool bar (or menu bar), then how should I send my email?

  Thunderbird: In write mode can not find the tool bar (or menu bar), then how should I send my email?

  Well you can press Ctrl + Enter or you could re - turn on the menu and the toolbar https://support.mozilla.org/en-US/kb/display-thunderbird-menus-and-toolbar .

• XP mode can not access to any computer on the network

  Have Win7 with the virtual machine running in xp mode.  I can not connect to any computer xpmode netwok.  In Win 7, that it connects very well.  I tried to create the "WORKING group" and several other names on all computers and are still in xp mode no other computers. If the computer xpmode appear to any other "Access is denied" is displayed and then it never appears again.  I set up a Win 7 running in xpmode before and had no problems.

  Internet connection works fine all the time.

  Configure XP Mode PC network settings to use the host computer's network card.  For more information, see Windows 7, XP Mode network settings . Boulder computer Maven
  Most Microsoft Valuable Professional

• CC prescription is waiting for 2 weeks already (credit card is charged), still can not activate software

  So I ordered a subscription CC 11 Oct and I received an order confirmation.

  A day later, the charge of Adobe for the correct amount appeared on my credit card statement

  As of today October 26, the order is still 'Pending' in the overview of the order. This means also that I can not activate the software as long as the order is not finalized. I get the message "No subscription found" when I try to activate.

  Support cat understands the question, but is essentially powerless. Apparently Adobe does not mess with subscriptions/payments/orders. Cat it degenerated to Adobe, but they are not (I have an ID case opened in "Adobe response pending" status for more than a week).

  I need the software Adobe CC for the College. What should I do? Who should I contact to develop the order and activate the subscription?

  Do I really need to initiate an opposition to payment of credit card to attract the attention of Adobe, or is there a way more tact?

  Well I don't know who fixed my account because I did not email.

  But when I checked this morning, the "free membership creative cloud" was finally withdrawn from my account with only the paid plan remaining. Subsequently all buttons in the application of CC Office changed to 'Open' or 'Install' instead of 'Try' and I was able to activate the apps I had already installed.

  So who fix it for me. Thank you Angel of unknown Adobe support and Adobe support team, I now have access to the software I need for College again.

• Hibernate mode does not work on my Satellite L650-1PE

  Hi all

  I have Toshiba laptop Satellite L650-1PE system (psk1je) & windows 7 32 bit & I updated the BIOS to version 2.40... so I can not put windows 'Hibernate' mode... the screen turn off then it turns on again!

  Y at - it an update or what I can do?

  Help please.

  Thank you

  .

  Hello

  Maybe you should enable hibernation, first:
  Do this:
  -Start CMD (control box) in search, type CMD and press ENTER
  -Type powercfg /Hibernate + it +.
  -Close the box and go to Advanced Power Options
  -In advanced options to sleep, expand the sleep tree and disable standby hybrid.
  -Now go back to the start menu and you will see the new entry into hibernation.

• Dual channel mode is not enabled on the Satellite P50T-B-10V

  Hello

  I recently bought a laptop by Satellite P50T-B-10V.

  Everything works fine, but I saw in the software helped that it s not activated for 1The memory channel mode, although the chipset support this mode.

  How can I solucionate what mind?

  + Memoria driver +.
  + Type Dual Channel (128-bit).
  + Modo Activo single channel (64-bit) +.

  I hope that your answers! Thank you!

  Dual channel mode can be activated manually.
  Mode dual channel will be activated and used automatically if all of the requirements be fulfilled.

  What does that mean?
  Well, to use the two channels, you need two memory modules and both modules need to support dual channel.

  The Satellite P50T-B-10V seems to be equipped with a module of 8 GB RAM
  http://www.Toshiba.PT/laptops/satellite/satellite-P50-b/satellite-P50-b-10V/

  This is why the double channel does not appear to be used.

• Can not install display on Satellite L500D-14W driver

  Hey,.

  I have a big problem with the display driver. I reinstalled Windows now I can not install the Toshiba or any other updated the driver. I can't use the old display resolution 1366 x 768, only 1024 x 768.

  The Windows Device Manager shows only Standard VGA graphics card

  I tried so many ways to solve this problem.

  > I tried so many ways to solve this problem.
  What means?
  What version of Windows do you use?

  As far as I know that Toshiba offers drivers tested for all supported operating systems so I put t understand your problem.
  According to specification for laptop, your laptop comes with preinstalled WIN7 64-bit HOME PREMIUM & 32 bit DVD. Why you n t use one of these original images of recovery?

• Can not turn off my Satellite L670-1DN

  Can not cut at all. Works well but on permanently. Any help would be appreciated.

  Can you please send more details?
  Are you using the original OS that you got with it?
  Since when you have this problem?

  What happen when you try to turn off on a regular basis using the Start button?

• Can not activate WIFI on Satellite P200-1FY

  Hello =)

  First of all, I apologize for my bad English, I will do my best to be understandable!
  So, I got a problem with my satellite P200-1FY: I can not activate the WI - FI card. I have try the combination of keys (fn + F8), and it does not work. I check the center of mobility of Vista in the Control Panel, it says that WIFI is not activated, but [I can't click on the button to activate it. | http://anonlinepieceofmymind.com/blog/images/wifi.jpg]
  I have the latest version of the driver for the wireless card, so I can't understand why it won't work. (but maybe just because I'm just a total beginner ^_^')

  Thank you for your time and help,
  Edward.

  Have you turned on the switch on the side of laptops?
  I put t know not which way the switch is present, but check it must be somewhere on the side.
  This switch must be turned on everything first, then you can use the FN + F8 key combination.

• Can not play games on Satellite A60

  I the A60 (Mobile Radeon 7000 IGP) and cannot play games on it. Particularly annoying is that I freeze in second life with a gray screen. I have contacted ATI who told me to look here but I have the updated driver from this site. Someone at - it ideas?

  Hello

  First of all, I think that you can not expect that you will be able to play the latest games because of limitation technique graphics card. Only thing that you can do right now is to install the driver designed by the manufacturer of the graphics card or downloaded from some independent sources.

  It will require your graphics card to run faster, but I hope you won't have overheating problems.

• Can not install XP on Satellite A200-27N display driver

  Hello

  I installed xp on my a200-27n, but when I try to install diver screen http://support1.toshiba-tro.de/tedd-files2/0/display-20070809122620.zip, it gives an error message that the dishes is not validated for my computer

  pls I need help

  Are you sure that you have chosen the right driver?
  According to the error message you try to install the driver is not compatible!

  Satellite A200-27N belongs to the PSAE3E series.

  Check again!

• Edition: «print on both sides...» "not this checkbox in V10.1.2 under Win XP SP3

  Since upgrading to Adobe Reader 10.1.2 (I never had of desire), my "Print on both sides" option is of course WE (by default), but I can not turn off because the box to do so is not present in the print dialog box:

  

  The box should be located under the "Choose papre source" box, but it is not. This is why the advice of http://kb2.adobe.com/cps/928/cpsid_92870.html is useless. I did a control panel > programs > change/fix, still the same problem. Also tried Adobe Reader > edit > Preferences > General > uncheck "Enable protected mode at startup" (suggested in another thread), problem persists. The reactivated (protected mode).

  Using Win XP Pro SP3.

  It is a real pain... each print job brings the dreaded "Print to order both sides ', with paper wasted, what makes each page to print manually, etc..  I've seen this scenario reported by others... Adobe, please fix this!

  Hi Johann,.

  You driver doesn printer supports duplex printing, due to which you are not able to see this checkbox.

  You can try the following command to disable via registry duplex printing:

  1. go in: start-> Run-> type Regedit-> click OK.

  2. open the registry editior. Look for the register:

  [HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\10.0\AVGeneral]

  3. find the existing DWORD value named:

  «iDuplexMode "= DWORD: 00000001".»

  Set the value as:

  1 = no duplex

  0 (or key does not exist) = duplex

• Lost start menu / no. icons on bottom / cannot start in safe mode / can not use windows fix option

  After a restart of my computer I have more a start menu bar or icons on my background.  Things seem to work ok most of the time, but my pc hangs on the blue screen more than before.

  I tried to reset my computer to a previous point of reset but my help and support option does not work and when I use the option in the advanced start-up splash screen it appears that it nothing happens because I find myself with the same State of no start bar or the desktop icons.

  I also tried to start my computer in safe mode, but it hangs and never completes the operation.

  My computer came with an installation disk ever because he has been on a hidden HD (Dell 9200) partition but I can't access it because during startup, it hangs at the same place as my safe mode option blocks so I can't use the windows fix option.

  Can anyone think of anything I can do to fix this?  I got it to work by removing the file Explorer in my window of Task Manager running it again, but this seems to be a symptom of a larger problem because I get the blue screen.

  It is up to you and if you want to wait. You still need a hard disk physically viable well. Maybe you want to just wait and then break the RAID 0, treat readers as being separate and test with the diagnostic utility before installing Win7. You do a clean install anyway.

  I'm really happy with Win7. Just make sure you have the drivers for it. MS - MVP - Elephant Boy computers - don't panic!

• map mode, can not get...

  I'm stuck in map mode, the menu display a contour, pixilated glimpse and preview overprinting, they are the only options, CS4, there used to be a "Preview" option, I tried the file by closing and reopening, but same problem when I open it again. I have no guides in my project, and nothing is locked...

  * by the way, where can I suggest adding another builders forum video download video site example, they youtube and vimeo as one option among others, I would like to use screencast.com because it works with the capture of jing very easily and quickly. h.264 mpeg 4 files.

  

  The individual layers can be put in and out control (keyline) mapped mode by clicking on their eyeball in the layers panel.  Maybe it's what you're looking at, because your image is not displayed in mode traced...

  Regarding the suggestion forum will, you can try the forum (http://forums.adobe.com/community/general/forum_comments), but they were less sensitive to suggestions recently.

• Satellite A500-1GL - Touchpad can not be disabled

  Hello

  I'm new here and I have a * problem *:
  Unfortunately, I can't turn off my touchpad. With the FN + F9 and not even with this little button above the key.

  I hope someone can help me quickly. Before, thank you in advance!

  Sorry for my bad English, I hope you understand what I mean :)
  best regards from Germany,

  Jonny ;)

  PS: my laptop: Satellite A500-1GL

  Hello

  Have you tried to reinstall a driver for the touchpad?

  Post edited by: Jeka-HE