Edge connection string error

Similar Questions

• I can't connect to certain things (connection refused error)

  Hello

  recently I am experiencing an error where my mac does not connect to certain things, to make an example and explain

  -I can't open the web page of google

  -I can't open another page Web (connection refused error)

  -I can't open steam but downloads don't work and so used to the store

  I had this problem once before, but a call for assistance from apple and everything worked again.

  I would like to know what causes this problem and how to solve this problem, so I can't call assistance all the time

  Thank you

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  The first three are clearly not VSearch files because the names match either of the above models. The last two are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these legitimate files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• LabSQL to MySQL connection string syntax

  Hi all

  I'm just starting using labSQL and MySQL and cannot even connect to the database, I want to start practicing. I tried to write my own code and use the code example, but I can't get a connection to a database. The error is still "an Exception occurred at ADODB. Connection: The operation is not allowed when the object is closed. Help path is C:\Windows\HELP\ADO270. CHM and context in ADO Execute.vi connection 1240653-> Simple.vi". I've set up a system DSN using the MySQL ODBC Unicode 5.2 driver and I'm under Labview 2012 with MySQL Workbench/5.6 Server 5.2. I really just need to know the syntax of the connection string that you pass in the ADO connection open vi.

  Thank you in advance.

  
  

• Support of connection string. Works fine in VS, not SQL.

  Attempt to create server SQL 2008 r2 link our AS400. I have a connection string that has been tested in Visual Studio that works:

  Driver = {Client Access ODBC (32-bit) driver}; XUID = xupd44xxx; System = QSERVER; DBQ = QGPL; dftpkglib = QGPL; LanguageID = ENU; pkg = QGPL/DEFAULT (IBM), 2,0,1,0, 512; qrystglmt =-1;

  In SQL 2008 r2 there is no Client Access ODBC Driver listed under suppliers. I chose IBM DB2 for I IBMDA400 OLE DB provider with the same provider string.

  The linked server has been created, but failed a connection test.

  An exception occurred during the execution of a Transact-SQL statement or batch.

  Failed to initialize the source object of the provider data OLE DB 'IBMDA400' of the 'name' linked server (Microsoft SQL Server, error: 7303)

  Searched error and appears as invalid server name. Name of the server (QSERVER) replaced by the IP address.  Still no luck.  Now, my forehead is flat of this bump on my desk.

  Any help would be greatly appreciated.

  Hi CorrieSigler,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. Please post your question in the MSDN forum. You can check the link for your question:

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer/

  Hope the helps of information.

• could not find a server reports and analysis hyperion running on localhost port 6800. Please check your connection string server and verify that the server is

  Hi all

  We have properly installed and configured Hyperion Reporting and analysis 11.1.2.4 in windows 2012 server however when I try to logint to the workspace, I get an error like "start-up of the specified document does not exist in the repository." "Select a new start under the General Preferences tab document" monitoring of "could not find a server reports and analysis hyperion running on localhost at port 6800. Please check your connection string server and verify that the server is up '.

  
  

  
  

  

  
  

  

  HyS9RaFramework_epmsystem2-syserr:

  GsmNotFound

  com.brio.one.services.globalservicemanager.GSMException: GsmNotFound

  at com.brio.one.services.globalservicemanager.GSMFactory.getGSM (unknown Source)

  to com.brio.one.client.ClientFactory. < init >(Unknown Source)

  to com.brio.one.client.ClientFactory. < init >(Unknown Source)

  to com.brio.one.client.ClientFactory$ ClientFactoryInitializer.connect (unknown Source)

  at com.brio.one.client.ClientFactory.getClientFactoryConnect (unknown Source)

  at com.brio.one.client.ClientFactory.getDefaultGSM (unknown Source)

  at com.brio.one.web.properties.ApplicationProperties.getDefaultGSM (unknown Source)

  at com.brio.one.web.properties.ApplicationProperties.getDefaultGSMContext (unknown Source)

  at com.sqribe.WS.WSBaseServlet.setDefaultGSMContext (unknown Source)

  at com.sqribe.WS.WSBaseServlet.initLogging (unknown Source)

  at com.sqribe.WS.WSBaseServlet.loadConfiguration (unknown Source)

  at com.sqribe.WS.WSBaseServlet.init (unknown Source)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletInitAction.run (StubSecurityHelper.java:283)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)

  at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)

  to weblogic.servlet.internal.StubLifecycleHelper. < init > (StubLifecycleHelper.java:48)

  at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)

  at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981)

  at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955)

  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)

  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)

  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)

  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)

  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:52)

  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:31)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:246)

  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)

  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)

  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)

  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  In the workspace, it shows that the Service is pending.

  

  EMP Diagnostic Report:

  

  Can help kindly out how should I solve this problem.

  I restarted the services and rebooted the Machine but still getting the same error.

  Kind regards

  VJ

  
  

  Hello

  I've reconfigured the Reporting, analysis, and everything by, I chose "Drop table" and the issue was resolved.

  Kind regards

  VJ

• Developer SQL 4.1.1 connect returns "invalid connection string format.

  The "invalid connection string format" error is returned, while trying to connect, you use sql developer 4.1.1.19, using 1.8.0_51 JDK on Win 7 x 64 environment.

  The powers of the exact same connection, on the same OS Win 7 x 64, a product without any errors using sql developer 4.0.2.15, using the JDK 1.7.0_80

  Credentials were basic, by default, the name of the Service (not SID) and no special authentication.

  This problem is replicated when it is installed on a different platform to Win 7.

  Screen attached.

  You say you have no non-alphabetic characters, but see this previous discussion (a hyphen was the problem) and see if any of Jeff's suggestions work for you: connection error after upgrade to 4.1

  I also read another post (non - developer SQL) where a symbol (@) in the password was a problem, but that may not apply to your case.

• open connection string

  Greeting dear community.

  What I have in my tnsnames.ora and verify that everything works via sqlplus

  CDB1 =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 0.0.0.0)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = cdb1)
      )
    )
  
  
  ORCL =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 0.0.0.0)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = orcl)
      )
    )
  YMQCTPRD =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = ymsdbprd-scan)(PORT = 1522))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = YMQCTPRD)
      )
    )
  
  
  
  
  YMQCTSUP =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = ymsdbppr-scan)(PORT = 1522))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = YMQCTSUP_SRV)
      )
  

  I try to get RJDBC to work so I can connect to Oracle of R analysis of data...

  This connection string works for my local db which I have in my virtual box

  con <- dbConnect(drv, "jdbc:oracle:thin:@//localhost:1521/orcl", "demo", "demo")
  

  However, it does not work when I do it to remote db that I really need to pull data from...

  > con <- dbConnect(drv, "jdbc:oracle:thin:@//ymsdbppr-scan:1522/YMQCTPRD", "user_read", "user_read")
  Error in .jcall(drv@jdrv, "Ljava/sql/Connection;", "connect", as.character(url)[1],  : 
    java.sql.SQLException: Listener refused the connection with the following error:
  ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
  

  For this DBMS tnsnames.ora entry "ymsdbprd-scan" but your JDBC URL 'ymsdbppr-scan.

• Format of the connection string to connect to Oracle DB via LDAP

  Hello
  
  I have an Oracle database and its details are configured in LDAP. I have the c# code that I want to connect to Oracle DB using LDAP details. So I wrote the code to connect to the Oracle DB, but not able to connect. Implementation error at the con. Open() statement: "ORA-12154: TNS: could not resolve the connect identifier specified.
  
  Code:
  --------
  String s = "Data Source = @ldap://abc.pq.xyz.com: 11389/myldap, cn = OracleContext, dc = pq, dc = xyz, dc = com; User Id = MyDB; Password = MyPass";
  
  Con OracleConnection = new OracleConnection (constr.);
  con. Open();
  
  I need help in the formation of the connection string.

  user8786648 wrote:
  Hello

  I have an Oracle database and its details are configured in LDAP. I have the c# code that I want to connect to Oracle DB using LDAP details. So I wrote the code to connect to the Oracle DB, but not able to connect. Implementation error at the con. Open() statement: "ORA-12154: TNS: could not resolve the connect identifier specified.

  Code:
  --------
  String s = "Data Source = @ldap://xyz.us.oracle.com: 11389/xyz_ldap, cn = OracleContext, dc =, dc = oracle, dc = com; User Id = xyz; Password = xyz";

  Con OracleConnection = new OracleConnection (constr.);
  con. Open();

  I need help in the formation of the connection string.

  This isn't how you use LDAP for Oracle name resolution.

  You must configure the LDAP protocol. ORA and SQLNET. ORA files properly.

  For example, you can review the LDAP protocol. Documentation of ORA here:

  http://docs.Oracle.com/CD/E11882_01/network.112/e10835/LDAP.htm#i500397

  And the SQLNET. Documentation of ORA here:

  http://docs.Oracle.com/CD/E11882_01/network.112/e10835/SQLNET.htm#i500318

  A quick search on the terms "example of oracle ldap.ora", shot to the top of several examples.

  Also, if these are real values that you posted in your example of a connection string, you can change.

• Connection string database MS using ASP VBScript and DW8

  Hello

  My MS database has worked with DW8 following my use of a connection string in connSci * .asp. My OS is Windows7. It worked well.

  <%
  ' FileName="Connection_ado_conn_string.htm"
  ' Type="ADO" 
  ' DesigntimeType="ADO"
  ' HTTP="true"
  ' Catalog=""
  ' Schema=""
  Dim MM_connSciWeb_STRING
  MM_connSciWeb_STRING = "DSN=DSN_******"
  %>
  

  Now when I update the db and check that additional new records have been added (and they were) I can access than the original documents. When I test the connection string again, I get the 404 error message.

  Can anyone help?

  Concerning

  Kevin

  Is the logbook of your question that provided brégent correct? Please clarify that for us. Connection problems are not uncommon. but they are fixable.the first thing that I think that you have to solve is the error when you test the connection in DW. If you did not change anything in the login script, then it means that something has changed on the server with the DSN or DB file itself, as booth said. Re-check all the files from the server and DB DSN situation with the path to the DB. You can try to delete the DSN and re-create. I also suggest to try a connection without DSN. These were commonly with Access databases for many years, so you should easily be able to find the instructions a quick Google search. .

• Connection string - Coldfusion Administrator

  Is it possible to have more than one parameter configuration connection string in CF8?

  CF Admin only allows me to do one or the other but not both.  I need to put two ways...

  jdbcCompliantTruncation = false

  zeroDateTimeBehavior = convertToNull

  I tried many options.  At last CF8 Admin allow me to do this... connectstring = "jdbcCompliantTruncation = false;" zeroDateTimeBehavior = convertToNull' but it didn't fix the error in my application.

  I choose the error I like better, but this is hardly a solution.  Can someone please?

  ConnectString = "jdbcCompliantTruncation = false;" zeroDateTimeBehavior = convertToNull

  Have you tried to separate the parameters with a '&', as in a URL?

  jdbcCompliantTruncation = false & zeroDateTimeBehavior = convertToNull

  I choose the error I like better, but it's almost a

  solution.

  Ah. Is not so popular eenie meenie miney moe building method of connection strings.

• ASP connection string problems

  Hello
  
  I have inherited a website and need to make some urgent changes, currently all recordsets is handcoded and is in an absolute mess, I migrated to SQL server to allow me to create new recordsets through DWMX, but the site is far from ready to move to the new DB and I am unable to connect to the DB access.
  
  The database is a db access with a security.mdw file that controls access how can I make changes to my connection string to connect? I have included my latest effort below.
  
  Dim MM_conTest_STRING
  MM_conTest_STRING. Mode = adModeReadWrite
  MM_conTest_STRING. Provider = "Microsoft.Jet.OLEDB.4.0".
  MM_conTest_STRING. ("Properties (" Jet OLEDB: System Database ") = Server.MapPath("***\Security.mdw ")
  MM_conTest_STRING. Properties ("User ID") = «*»
  MM_conTest_STRING. Properties ("password") = «*»
  MM_conTest_STRING. "Open Server.MapPath("***\Database.mdb")
  MM_conTest_STRING = "DRIVER = {Microsoft Access Driver (*.mdb)}; DBQ ="& Server.MapPath("***\Database.mdb")
  
  However this only gets me the following error message:
  Microsoft VBScript runtime (0x800A01A8)
  Object required: "
  fporiginal/connections/conTest.asp, line 9
  
  If I remove everything except the last line, I get the following error:
  Microsoft OLE DB provider for ODBC (0x80004005) drivers
  [Microsoft] [ODBC Microsoft Access driver] You do not have the necessary permissions to use the object '(unknown) '. Ask your system administrator or the person who created this object establish the appropriate permissions for you.
  / fporiginal/categories.asp, line 15
  
  Any help gratefully received
  
  See you soon
  Ossie
  

  Duh! for anyone interested is solved my problem - the answer:

  MM_ConTest_String = "Driver = {Microsoft Access Driver (*.mdb)}; DBQ ="& Server.MapPath("***\Database.mdb") &" SystemDB = "& Server.MapPath("***\Security.mdw") &"; UID = *; pwd = *** "

• Version with ControlLogix - link cRIO (implicit messaging), "(Code 16 #0315) problem" connection request error: invalid segment type ""

  I have developed and delivered a system in Germany several years ago.  He worked then.  But the cRIO was damaged and replaced by a newer model, and does not now.  I suspect (and Support technical OR agree) it's a problem of software version, which could be solved with the NOT-MAX Software Installer.  But I do not have access to the system myself, and correspondence is slow and tedious.

  The original system was a cRIO-9073, developed with LabView 2009.  He used the implicit Messaging.  The ID of Instance, sizes, IP addresses, etc everything has worked very well.

  The current system is a cRIO-9074, with LabView DURATION 14.0 (I guess that LV 2014), Scan Engine 4.3, NI - Industrial Communications for Ethernet/IP 14.0.0, etc.  Programs FPGA and processor are responsible and seem to work in the cRIO.  The "EthernetIP Set Assembly Instance Data.vi' will return no error.  But the PLC just pointing out "(Code 16 #0315)" connection request error: invalid segment type "."  We looked at intellectual property (the mistake was different), sizes and body #s.

  The PLC doesn't have to all be modified.

  Anyone know if there is no problem of compatibility with LV-2014 and Ethernet/IP 14.0.0?  Or if there are all the other required packages?

  I am including the NOT-Max reports.

  Hi ZX81

  To help you 2009 application to work with the new cRIO, you must deploy it to the device. You must in order to deploy the cRIO, make sure it has the same versions of software that you used with the old cRIO.

  You can format the cRIO NI MAX and deploy the application of LV, 2009. However, if you do not have access to the cRIO or your client does not have the necessary software, you can deploy the application in another cRIO with software (cRIO same model and same modules as your client) and create a picture of it and send it to your customer so that it can deploy the cRIO even without the software on his computer. The following document explains how to do this.

  Utility of RAD

  WenR

• SQLite3 connection string?

  Hello

  I have a SQLite3 database file. I read with labivew. I installed the ODBC driver since http://www.ch-werner.de/sqliteodbc/.

  I created the DSN. I would like to read different with their paths .db files.

  If I use directly the DSN 'temperatura' is works very well, but he always read from the path that I put in the configuration of the DSN - name of the database. Check the attached file.

  I would like to have a DC path to read any file, but the connection always read from the same file string. Show it in http://www.connectionstrings.com/sqlite3-odbc-driver/ :

  DRIVER = SQLite3 ODBC Driver; Database = c:\mydb.db; LongNames = 0; Timeout = 1000; NoTXN = 0;
  SyncPragma = NORMAL; StepAPI = 0;

  But it does not work. He has not found the provider.

  On the internet, I found this:

  Provider = MSDASQL.1; initial Catalog = C:\test.db; Persist Security Info = False; DSN = temperatura

  IT works but always read the file corrected in DSN temperatura configured in the ODBC administration

  In the initial catalog, I put another file and read the same thing that sits on the DSN temperatura.

  Somehow I can use good connection to play diferent?

  Concerning

  The SQLite library documentation seems to suggest that simply use it as your connection string:

  Driver = driver ODBC of SQLite3; Database = full-path-to-db;

  What version of LabVIEW are automatically using and that the number of bits (32/64)? There are two versions of the ODBC - one for the 64-bit ODBC drivers connection manager and one for 32-bit ODBC - drivers they are treated separately by the operating system.

  I've never used this library - but there is an alternative that I used and it works fine: http://sine.ni.com/nips/cds/view/p/lang/en/nid/212894

• Microsoft connection and error code 80072EFD and kb2656353, kb2656370

  Having prolems connecting to microsoft Server error code 80072EFD and kb2656353, suggestions kb2656370

  Hello

  1 did you change on your computer before this problem?

  2. What Service Pack in installed on your computer?

  3. you receive an error message?

  You can read the article and then check.

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941

  See also:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

  http://support.Microsoft.com/kb/906602

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

• I did a system restore and now I can not connect. Error code oxc004e002.

  I ran the restoration of the system and now unable to connect. Error code oxc004e002 AAn arrives. McAfee also keeps poping up saying that I am not protected

  Hi Rita Morgan,.

  1. on what application you can not connect?

  2. When you mention "sign in" mean, you are not able to boot to the desktop?

  3. have you updated your McAfee security software?

  Make sure that it is not expired and updated your McAfee software up-to-date.

  Follow the steps below and check, if it helps.

  Step 1:

  Start your computer in safe mode with network and check if that helps to connect.

  Step 2:

  This problem can also be caused by a malware, I you have to perform a full scan in safe mode with network in order to remove the malicious software and since then, your McAfee does not protect your machine, I would have you to run a scan using the link below.

  http://OneCare.live.com/site/en-us/default.htm

  In addition, check out the link below and check if it is related to your issue.

  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/b7e31d29-801B-4AFA-932e-46572344476a

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]