Edge E330 problems with OS 2

Similar Questions

• Can I put edge E330 display with 1600 x 900 resolution?

  Personal salvation of lenovo,

  I am interested to buy the Thinkpad Edge E330, everything is great except the display resolution which is 1366 x 768. Is it possible to update the screen HD + (1600 x 900)?

  Look here: http://download.lenovo.com/parts/ThinkPad/e330_fru_bom_20121004.pdf

  Your model is not produced with this matrix.

  You can try another model, but it is at your own risk. No guarantee that it will work.

• ThinkPad Edge E530 problem with GT 630 M

  I have a problem with my GT 630M graphics card.

  When I use it to play games the base of GPU frequency goes no higher than 270 Mhz while it is 672 Mhz at full speed.

  I tried different games like Borderlands and Empire Total War and no change.

  I've seen it work to 672 Mhz for a few seconds only after a reboot, but then he went down again.

  Also tried with the latest drivers Nvidia and the last package of drivers of Lenovo and no change.

  Someone knows how to fix this?

  Bregell

  
  

• Edge 20141 problem with edge commons do not work now

  Hello

  I'm trying to make Parallax but with common edge but do not work now, working with CC 2014. If anyone can help me thank you

  There is no need to uninstall. You can have both versions of the edge that is installed on a system.

  Go to, animation HTML | Download the free trial version Adobe Edge animate CC

  And select the 'CC 2014 simulation' menu dropdown and download and install.

• Problem of processor edge E330

  I bought a Lenovo Edge E 330 less than a month ago and a few days, I realized a strange question

  The Manager of peripherals and cpu - z shows only 3 processors instead, and the frequency of the Ram at 800 Mhz

  My config is Intel Core i5 3210 M 2.5 Ghz, 4 GB of Ram DDR3 1600 Mhz.

  All the drivers are up to date including BIOS.

  HT is enabled by default on the configuration of the bios.

  What I've done so far: unistall each processor and when reboot it show more than 3.

  Tried to look at Msconfig setup to force windows to start with 4 processors but I have max 3 shown on the box.

  I reinstalled Windows and still no solution.

  Does anyone have an idea what could be the problem and what should I do?

  Thank you!

  I have attached a few screens it could be useful!

  

  

  This happens on my e330 too...

  new BIOS 1.15 caused this problem... not only showing 3-wire, but the CPU always runs warm and drain so much power with hypertheading active.

  You can choose to disable hyperthreading or downgrading BIOS to 1.14 to fix this
  http://forums.Lenovo.com/T5/ThinkPad-edge-S-series/edge-E330-SpeedStep-not-enabled/TD-p/898353

  on the DDR3-1600.
  the real clock is 800 MHz but works effectively at 1600 because of the "double data rate".

• Problem with animation .oem EDGE

  Hello world

  First of all, I want to thanks to all of the community forum Adobe for many of the useful discussions and lots of useful information. It is my FIRST post in the Adobe Forum.

  Well, I am a member of creative cloud and I'm almost finished our first DIGITAL MAGAZINE (visit Montenegro). I think we're doing great work, and this digital magazine is published as a standalone application.

  We discover very nice and attractive opportunities for animation with Adobe EDGE Animate. Unfortunately, something is not right here. We install the new EDGE (v 1.5.0.217.23270) and we create an animation

  for the COVER page. We follow all the instructions and we publish file OEM.

  When we put this file OEM in inDesign, we had not seen the animation in the PREVIEW of the OFFICE, but also when we test folio on iPad - same problem appear - we have not only static IMAGE POSTERISEE animation.

  By the way, animation works well when we saw in the browser (and for more information - put us AUTO PLAY on the EDGE - SCENE and also in inDesign Web Content + 0.125 dry delay).

  Now we try with another solution - make us frame in inDesign and we put the HTML file of the same animation in this setting (Folio overlays/Web Content). Then, we discover that NICE WORK with this kind of implementation of animation.

  But still, we want to know WHY. Animation of the OEM did not work in inDesign (folio files/articles)? Do you have someone from Adobe can tell us is there any problem with EDGE .oem files and inDesign CS6? It's strange, because we have the most recent edge and inDesign versions, but still we have the problem with the .oem animation files (does not work!). This great opportunity to make the most attractive digital magazine with animations created in Adobe EDGE must be better tested and be reliable for users in my opinion.

  I have appricite any kinf of information from other users, as well as representatives from Adobe. Thank you.

  I gave you the link. Find the right download for your version of InDesign and platform.

  Bob

• ThinkPad Edge E330 WiFi turn off

  Hello everyone

  I have Lenovo ThinkPad Edge E330. I run on Ubuntu. Laptop was connected to the Wifi thw and was on the sector without battery. When I put the battery unplugged AC and portable opend my wifi stoped working. It is said: Wifi is disabled by the hardware switch. The problem is that this model does not have any material pass over her body. I tried a lot of things:

  -Load default in BIOS

  -Reinstall Ubuntu completely

  -Search in ubuntu forums

  Thank you for the help

  Hello elFilipko,

  exactly the same thing happened to me today and it's how I managed to fix it:

  1. I downloaded four Windows drivers as described here (tthere first of all one of the links is not active more so I downloaded this driver in its current version of support.lenovo.com - Lenovo Power Management Driver for Windows 8).

  2. I installed all the drivers on my Windows 8 (I have dual boot - Win 8 and Ubuntu).

  3. after restarting the computer and reboot back to Windows, I pressed F9 to enter parameters related to a Wi - Fi (you may have to press Fn + F9, depending on your settings). After pressing this button, a small window with the parameters related to a Wi - Fi should appear in the middle of the screen (as far as I know, this special window appears only with the version of Windows 7 these drivers, so it is necessary to uninstall and reinstall versions of Windows 8 drivers in my case). In this little window, I disabled the plane and WiFi mode on.

  4. after step 3, it seems that nothing has changed, but just after the restart of Ubuntu, the Wi - Fi was on and working.

  I think a similar solution might work in your case also, just install Win 7 or 8 Win and try it.

  Best regards.

• Want to Phoenix 860-010: problem with fonts and the noisy fan

  I have a new machine, just a day old, and I'm having a problem with fonts.  The file Explorer, Edge and other similar programs seem to go from a very readable font that lights up in half a second or less whenever I move down on the page in these applications.  Police that results is much more difficult for me to read because of the lightness that results. I have not met this problem before.  Frankly, I don't know the source of the problem.  Is it hardware (video card) or (Windows 10) operating system software?

  Hello @PhotoGene47,

  Thanks for the quick response!

  Have you tried to see the document that I mentioned in my previous post?  If you prefer to have the Board repaired, you can consider contacting the HP support by phone for additional options.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• Some problems with the LAN on Satellite L10 card after BIOS update

  Hello

  I have a problem with my satellite L10. Map does not work after the installation of the new network of edge of Bios (2.80).
  I tried it on Linux, BSD and WinXp. OS see my net card.
  I can even install parameters and ping 127.0.0.1 and my ip.

  But all the other pool spoke to me query time-out.

  Help me please.

  Hello

  What to say I put t think that this could be linked to the BIOS. First of all, as you said that the LAN card is recognized correctly in the device if Manager she s works well!

  However, you could try to access the BIOS and could set the BIOS default settings. Don t forget to save changes to BIOS ;)

  In addition, it would be advisable to reinstall the NIC driver. The Toshiba driver page provides the Realtek LAN driver v5.618.1015.2004.

  Good luck

• HP 15 laptop: problem with the touchpad and the key "stuck."

  Hello!
   
  Last weekend, I have an irritating problem with my HP 15 laptop. Bought two years ago and upgrades to Windows 10 a year ago.
   
  First of all, my touchpad started to not work properly. It "freezes" and I can't use it until I click the ESC key, but it doesn't last and "freezes" again a few seconds later. Then, everytime I open a window where there is a text box (Start menu, edge browser, Control Panel, etc.), the number 5 is entered automatically and permanently, as if the button 5 has been blocked. I did a quick check and button 5 do not seem physically stuck.
   
  Yesterday, I restored the system to the factory settings, so I'm back to 8.1 for Windows and then upgraded to Windows 10. Everything seems to work fine, but this morning, the problem was back. Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.
   
  Thank you in advance for your help!

  Welcome to the HP support community @gouch3.

  I understand that you have a problem with the keyboard and the touchpad on your laptop from HP 15.

  Have you tried to use a keyboard external and mouse at all?

  Have you tried to go to Safe Mode to see if the problems persist in there?

  Have you tried to perform a material or forced reset Reset?

  Did you do a test of material?

  Have you updated your drivers?

  gouch3 wrote:

  ... Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.

  It could be a driver problem to be able to look at that for you, I need your model number. I wish I could give you an answer or not, but at this point without the troubleshooting results and the model number, it is difficult for me to say.

  I can say that if everything works in point 8.1 of Windows without problem, the driver TROUBLESHOOTING is a great place to start. Please try to follow these steps for the keyboard and the touchpad of troubleshooting:

  • Beginning
  • Search for Device Manager
  • Search results, open Device Manager.
  • Click on display
  • Show hidden devices.
  • Click the arrow next to keyboards.
  • Right click on the name of the keyboard device.
  • Select uninstall.
  • Continue deleting the names of devices in the category keyboards until the feature of all the names have been uninstalled.
  • Restart the laptop twice.

  Touchpad:

  • Type of research, "Device Manager."
  • Click on Device Manager,
  • Expand mice and other pointing devices.
  • Right click on the TouchPad,
  • Click on uninstall.
  • Restart the computer laptop twice,
  • Reinstall the TouchPad card.

  I found a document of troubleshooting for you to try also called Portable keyboard troubleshooting. Please be sure to follow the steps described in this document.

  The best document I have for TouchPad problems is the use and troubleshooting of the TouchPad and ClickPad document. 

  Here is a link to the HP Support Assistant, if you need it. Just download and run the application and it will help with the software and drivers that need to put up-to-date.

  This is a great question other clients may also be questioned. When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you want to show appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)

  Thank you!

• Problem with table/table and past data capture

  Hi all

  Newbie is back and I have a problem with my program.

  A brief introduction of what I'm trying to do.

  I'll show you a failure to a system event.

  Based on each event, I will need to connect the error description, the tag, the fault start time and duration.

  All the event information will be displayed on the front table and this table will increase when new event occurred.

  For descriptions and tags - this is fixed based on what fault affects, respectively.

  The issue I'm having is to capture time.

  What I have in mind is to use the time to enter the start time and duration also.

  Departure time is not question because once I press boolean = true, it gives the start time.

  For the duration, when I press boolean = false, it wil give the total duration.

  However, I have a problem as follows:

  (1) to capture what a comprehensive data set (for example / / Desc: fault 1, Tag: one, start time: 2008-12-16 11:15:06 duration: 0 00:00:05) and it passed inside the trap fault Table.

  (2) if the same failure has occurred, it will overwrite the latest information. However, I need to keep the display of old and new events.

  Please notify.

  Opinions and suggestions are welcome mosssssst.

  Million thanks in advance.

  Hi Roziela,

  Thanks for the post and I hope that your well today.

  You must add logic to detect the change of the event (no fault to fault) and produce a Boolean result by 'raising' edge.

  I have a code to do this,

  

  Let me know what you think,

• GPU upgrade problem with M3985

  I try to put a GTX in the Aspire M3985 770 - I have improved the power supply to a 650w with no problems (computer works without the card, as well as the power supply), but when the card is put that I meet problems.

  If I put the card in the system and plug my monitor, the computer gets to BIOS Acer screen... and that's all. After that, I get about 4 beeps every 20 seconds and the screen then goes black with a flashing underscore more than beeps. If I try to access the BIOS screen goes all black.

  If I have the card in the system and try to plug my monitor on the INTEGRATED GRAPH card... I get an error from the BIOS code. 1 long beep and 2 short. I know, it's a video card error. This also applies when nothing is plugged into the card or edge.

  When the card is removed, the problems to stop him.

  What I am led to believe that it is either:
  1. the motherboard is not compatible with the card (this really should not be a problem with a computer that is a year old... If it is, it's absolutely ridiculous.)

  2. the BIOS of the motherboard has problems with the map... a simple update the BIOS should fix this... but as I can see updates of motherboard for this computer have been neglected since BEFORE the release of this card, which explains a lot.

  3. the video card BIOS is the problem. I find it hard to believe though. The map has been updated in another computer. The card works fine, and the BIOS is in final review.

  Help to fix this would be appreciated so I can decide what I'll do with this card.

  Thank you.

  Just thought that I would let you know I solved the problem by changing the motherboard.

• A problem with your video hardware (video hardware error) caused Windows to stop working correctly.

  Product

  Windows

  Problem

  Video hardware error

  Date

  06/11/2009 19:16

  Status

  Not reported

  Description

  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem

  Problem event name: LiveKernelEvent

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 1033

  Files helping to describe the problem

  WD-20091106 - 1913.dmp

  SysData. XML

  Version.txt

  Additional information about the problem

  BCCode: 117

  BCP1: FFFFFA8009C16260

  BCP2: FFFFFA60026F1220

  BCP3: 0000000000000000

  BCP4: 0000000000000000

  OS version: 6_0_6001

  Service Pack: 1_0

  Product: 768_1

  Hello

  BCCode: 117 is generally a problem of display driver (video) If you need to update (check the system machine
  and the sites of the manufacturer of the device. You will need to remove and reinstall your video card a PC and not
  edge. Perhaps a replacement card is necessary.

  If necessary you can perform in SafeMode with network - repeatedly F8 tap that you start.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• A lot of problems with my CLIQ

  First of all, I would like to say that I take good care of my phone and there is NO damage or water damage done to it. I had my CLIQ since a few months now (about 3 months) and now I'm starting to have problems with it. The first problem I had was the keyboard backlight. Him DIA lit not I called customer service and they told me to do a master rest on it. So I did everything that I have said and still nothing has been fixed. So two days after I tried the reset again and nothing happens. After the reset, I tried to log in to my account, the second problem occurred. While session opening in my existing account, an error message comes up saying that my account was created incorrectly. I am so angry that I have to pay $400 for a phone that comes with a lot of problems. They must either replace my phone with a BRAND NEW one or another phone. Can someone help me please on how to solve these problems. My warranty has passed and I don't have insurance on this subject.

  you are connected to a wifi network or at least 3G while you try to connect? WIF works better. If you are on the edge, then it will Time out most of the time. From my experience at least. While you are at the login screen, you can press Menu > configure wifi. Then, you will be able to get into the wifi settings to connect.

• I have problems with my audio new laptop second hand when I plug in external speakers, it's as if some of the sound is missing. Can anyone help?

  Problem: Sound is missing for example hand singing on a piece of music.
  Laptop: Compaq Presario C700/C731TU
  Sound: High Def Conexant Smart Audio 221
  Version 4.42.0.50

  I tried updating the driver and also searched through preferences and settings but have not found a solution, this is the first place where I've been since then. IT all works very well by means of edge speakers, but even a standard set of headphones seems to miss her.

  Thanks for you suggestion, I did since then and he said that everything was working fine. I also tried a number of other suggestions from other sites, without success. I then went to do a physical inspection and when I unplugged the audio cable I noticed that the ring of metal around the entrance of my helmet was missing, I told the person, I bought the laptop. Fortunately he found on his ground, not knowing what it was and put it on the side of "just in case". I have re-installed and the whole works fine. So if someone else is reading this and is not able to resolve a similar audio problem with something to do with the software, look at the finer physical details. It could be as simple as that.