"Move" failover to different / interface port

Similar Questions

• I use iWeb for my website (use Go Daddy) but I would like to move to something different and easy even as iWeb (what you see is what you get) any suggestions?

  I use iWeb for my website (use Go Daddy) but I would like to move to something different and easy even as iWeb (what you see is what you get) any suggestions?

  Yes, why not take a look at EverWeb.  It has been designed to be very like iWeb, but with everything you wanted iWeb joined, as a form of contact, drop-down menus etc and much more.

  The layout is very similar to iWeb, and it was deliberately designed to be - have a look here EverWeb.

• Different networks on different Interfaces

  I suspect that the answer to this question is no, but it is possible to simultaneously run different routes on different interfaces via El Capitan?

  Here's my situation: I have a lot of work from home and rely on an endpoint of Cisco 871 VPN to drive my VoIP as workphone and connect my MBP to of the corporate network through the Thunderbolt Display.  At the same time, I have a NAS and a printer on my LAN, I connect to WiFi, I need to access.  Sure enough I could work this point in Linux, but my attempts on OS X, er, macOS were not successful with lots of horror.  The Cisco assigns a router by default for Ethernet display configuration, which I think is the culprit...

  Those about to give me lectures on corporate network security, I am aware, it defeats the purpose to isolate my end point of my network, but our network of offices is almost entirely jobs I need VNC/RDP to and I have permission assuming that I can make it work.

  Thank you very much

  MB

  Glance at the 'route' command from an Applications-> utilities-> Terminal Services session.

  You will have to Google to find examples of what you want to do.

  NOTE: I'm assuming that you are NOT any VPN software running on your Mac, and Cisco 871 is material external connects to work.  I mention this because usually a VPN on Mac software includes all of the network stack.  External VPN equipment would leave your single network interfaces to specify the different routes for your distinct interfaces.

• When I'm on a Youtube video that is running and I want to move to a different tab, Ctrl + < number of tab > doesn't work, is this intended functionality?

  When I'm on a Youtube video that is running and I want to move to a different tab, Ctrl + < number of tab > doesn't work, is this intended functionality?

  This can happen when the video player (Flash plugin) has focus.
  In this case the plugin consumes all key presses.
  You will need to click with the mouse on the page or in the UI to work keyboard shortcuts.

• Order of 100 Mbps with the same policy map on different interfaces of service-policy in routers

  We have several different interfaces in our routers. On that note, we have service-air to limit the bandwidth of 100 Mbps.

  If we use a sheet of class corresponding to a list of access as "permit ip any any".

  and map political with the class-map to the police up to 100 Mbit/s.

  If we apply this policy plan in the form of service-policy interface. All interfaces that use this service policy would share 100 Mbps or will they get 100 Mbps each?

  Thanks for any response.

  Concerning

  Henrik

  Hello

  As you apply the policy by interface, each interface will get 100 MB

  HTH

• The Hide box and Bezier shape position/movement/rotation is different.

  Windows 7

  Quadro K4000

  SpeedGrade CC and CC 2014.

  The area and position form Bézier masking is different.

  Bézier point of swivel form and movement is also different from the real masking area.

  You can solve this problem?

  This is a problem known to which occur when the clip is scaling or rotated in first. Do you use DirectLink, aren't?

• Dell EqualLogic PS4000 management interface port

  The management interface port can be configured as a port of e/s additional iSCSI on the PS4000 series?

  The online help in the Workgroup Manager console provides instructions on how to do it, but the checkbox "restrict access to the administration" in the parameters of property intellectual eth2 is grayed out. Also the data sheet for the States of SAN: ' two 2 GbE copper, copper 1 1 10/100 (network management only optionally) by controller.

  This option was available that on previous EQL without or is there a way to enable it on the PS4000? Maybe through the CLI.

  Thank you

  Nick

  It's a single management interface.

  In tables PS5x00 and PS6x00 an iSCSI port could be spent to be a single management interface.

• WRT54G2 - port forwarding to a different local port

  Hi people,
  I just tried to set up my wireless G router to transfer a WAN calls on a specific port IP address local and ANOTHER port. Here's the scenario:

  An incoming request: port 80
  Should be rerouted to: 172.16.0.2:8585

  The only option I found is to reroute the port 8585 to 172.16.0.2:8585 which unfortunately does not work for me in this case.
  Am I missing something?
  Any help is appreciated.

  Hi, thanks for your response.

  The problem was exactly what you mentioned at the end of your post - interface (not the router mmee) linksys does not Port forwarding for the local way different.

  For those who are interested in the solution - you have to Flash your router - details and download here - www.dd-wrt.com

  I did and now I am able to transfer to a specific LAN IP: Port (+ 1000s other useful goodies).

  

• IPS inline &amp; port interface port trunk Switch

  Hello

  Is it possible to configure the IP addresses as the topology below? SW1 and SW2 SPI connection ports is in trunk mode. I would like to configure the IPS in inline mode pairing interface. (not the vlan pairing mode)

  SW1 - IPS - SW2

  Kind regards.

  Yes, this method is fully supported.

  If you want to control all the VLANS with a single virtual sensor, then assign the pair inline interface to the virtual sensor.

  If you want to monitor the VLANS with different virtual sensors, we support groups vlan on this pair of inline interface.

  Do not confuse "inline-pair of vlan" with the "groups of vlan inline on a pair of inline interface.

  The "pair of vlan inline" will pair 2 VLANS on the same interface. When a package arrives in the sensor it will be sent back the same interface with its header vlan has changed.

  The "groups of vlan" on a pair of inline interface don't change headers for VLANs.

  They are only used for virtual local networks, so that the Group of VLAN can then be assigned to a specific virtual sensor.

  You could then take a group of VLANs for your office network employees and assign them to vs0 and take a second group of VLAN for your DMZ and assign them to vs1.

  You can place a vlan unique within each vlan, or you can place several VLANs within each group vlan.

  But it only made sense to have 4 groups of vlan, because you have only 4 virtual sensors on most devices (a bit like the 4215 have 1 virutal sensor so you can make groups of vlan on the 4215).

  I also recommend that you change your virtual sensor and set the Inline TCP Session tracking mode on "Interface and Vlan. In this way the sensor will separately monitor connections on each vlan. This is necessary if a router can route traffic between several VLANs. Without this setting, the sensor will become confused if it sees the same connection of multiple VLANs.

• How can I move email to different folders?

  Before I changed my e-mail delivery system all I had to do was click, send to, and I could send an email to a different folder to be registered and classified.

  You can move or copy a message to a folder that exists in Thunderbird.
  Right-click-' move to ' or ' copy to ' the list of folders.
  If you need a new folder, you must create all first and then make the move.

  TB - 38, 3 Win10-PC

• 9.3.2 IOS cannot move applications to different screens

  I am trying to clean my apps on my 6 iPhone with IOS 9.3.2.  I created folders in order to decrease the amount of screens but Apps move into folders on different screens.  I tried hard reboot but that does not solve the problem.

  I saw this with the iPhone phones 6s series, because users are not as familiar with 3DTouch. When you try to get the icons of "agitation" on the screen, you can't do it, right? You press down on the icon and nothing happens? It's because you push to hard.

  The best thing to do is to simply put a finger gently on the icon and leave it there. Do not press down on the screen at all. This should get the icons to wiggle and you should be able to then drag icons in the desired position.

• USB &amp; Firewire audio interface ports still work as input and output?

  I guess everyone has to start somewhere, even if it is borne by almost everyone I would like to know the answer to my questions, perhaps with good reason, what I don't know is so if the USB ports unique connection and firewire on an audio interface function ALWAYS both as input AND output.  In other words, whenever I read the information about the product on audio interfaces, no matter where I go, it is generally accepted that most people buy their audio interface for RECORDING.  And so when most people talk about connecting their Apple computer, iMac or MacBook Pro, it is generally accepted, they turn to the USB as INPUT.  That's all very well and good.  But in my case, I want to use the USB port as output (not the taken mini) and go into an audio interface that gives me as a symmetric output signal that I can plug my amplified studio monitor (which has only a balanced XLR input). All of the examples I see with audio interfaces address registration and involve the use of the USB on the audio input interface.

  So my question is: can one USB port I see on any number of audio interfaces always function both of the inputs and outputs? It takes, but if so, why does any site mention this fact and whey didn't they show in all the diagrams of the audio interface manual hook to studio monitors?  I know what may be obvious to some, but as a user with the intention not to use a piano for a scene while but rather a keyboard/MIDI controller that is attached to the iMac to be able to use the virtual instrument software, I need to go to the controller to the iMac, then the iMac in symmetrical powered monitors. Do the balanced inputs of speakers requires more than a simple adapter to give the President a balanced input.  But nobody talks about audio interfaces usually unless they talk about as a way into the computer to record.  As for my situation? Why don't they include this example?  And why should they assume that novice will automatically KNOW that the usb port, an audio interface will work as an output as if they never EVER mention this example or Setup?  I guess it is to operate in both directions!  But really, I'm crazy to wonder when no one never speaks or shows this configuration? He suggested I buy something similar to a UR22MkII of Steinberg, who has a USB port. Even the Steinberg site speaks only records and so using the USB key as input for use with the recording software. There is no mention of its use out the mac in balanced speaker entries, even in the manual. In fact, it is question is always true for every audio interface manual that I watched, even by other manufacturers! Why they all assume a novice like me (whose money is just as good as money from the experienced user) KNOW that? It's frustrating!

  I know that this is not strictly a matter of logic, but I guess, in my view correctly, that a logic user community could be more appropriate to address my question for others communities. If I'm wrong, please help to re-send-the matter.  Thank you.

  Sound the interface itself that determines it can send and receive Audio or Midi... not the USB or FW port which both are devices of e/s...

  All USB and Midi peripheral FW are inputs and outputs

  All the USB and Audio FW are inputs and outputs...

  All devices USB or external hardware with a USB port... can handle Midi and Audio...  Some do... Most manipulate just Midi... or just Audio

  The Steinberg UR22MkII manages Audio and Midi...

  However, I do not recommend USB 2.0 audio devices... There are simply too many cases, problems and questions after the major updates for OS X with such devices especially when they are class compliant (IE without driver), even if the UR22MkII Steinberg is supposed to be compatible 10.11...

  View the other may vary... because it's just a personal opinion based on my past experiences both in my studio... and based on the many issues presented here and elsewhere.

  I'm sticking with Motu equipment for all my Audio devices... and I use iConnect devices for my Midi needs...

• LabVIEW move things on different computers block diagram

  We have a site here license to my work, and I use several computers to develop and deploy our test code. However, I discovered that between computers, often things move on the block diagram simply by opening them on different computers. Mainly text fields. We have some text fields next to rows of a table of block diagram that are alliged with the lines of table on a single computer, while the same without code change when opened on another PC, all text fields are compressed vertically so that they no longer align with the rows of the table. This could be the cause, and is it possible to fix it?

  Thanks for the replies. It is the size of the police which was the issue. However, although I have tried to change the default Application font size (by the "default font" settings of "modification of the characteristics of text") to match the computers that had "correctly" it was not solved the problem. I finally realized that I had to change the police system from the Options > environment > fonts > menu fonts application of the front screen of "Open/create", then completely restart LabVIEW. Problem solved.

• Mobility groups, failover on different subnets

  I have read up on 5.1 and wonder how and if real failover on subnets is an option.

  I understand controllers mg even customers roaming on different subnets.

  How it works if your main "anchor" isn't alive to replicate the DB entry on the controller off-subnet? Say if die of my local WISN and the backup is in the next State, how the HA will maintain connectivity?

  Thank you!

  Yes, but tha ap will be the new configuration of the WLC. Also, users will get tunnelees to the wlc and be thrown out of this subnet. Then make sure you understand the ssid and ip clients will get when they associate to of different wlc. That should do it.

• How to move folders to different readers user?

  I would like to have all the user data (documents, pictures, mp3, downloads, Favorites, etc) not on the system drive c: - but for different users on different drives. How can I do this in Win7 RC1?
  It was also easy to administer to the good old winXP...

  Thanks for any help!

  Hi BluesBoy,

  Thanks for posting "Preparation for Windows 7" community forum.

  You can move some of your files from user to different partitions.  There are a few settings that must be changed in order to redirect the registry to search for in the box appropriate for the steps.

  The user records that can be moved are the following: Contacts, Documents, downloads, Favorites, links, music, photos, parts saved, searches and videos.

  You can move them to partitions or storage locations, but you must select each folder one by one.

  1. Select a folder you want to move and do a RIGHT CLICK.  Select Properties.  Go to the LOCATION tab.  Click the MOVE to change the location where the folder should reside.

  2. in the location field, navigate to the location you want to the file resides.  Click APPLY.  You will be asked if you want to move all the files from the OLD LOCATION to the NEW LOCATION.  If you do, select YES.  If you do not select no - yes usually.

  We recommend that you move your user records shortly after the installation of Windows 7 because after you have installed applications for applications and documents can stay in the former locations of your user folders. These references can cause applications not to work properly and then they may need to be reinstalled.

  Thanks for posting to group Windows 7 forum.

  Kind regards

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.