Edge: Resizable layout - object Center

Similar Questions

• I can't resize any object inside a tab control and control of the tab itself

  Hi all

  Since this morning I noticed that I can't always resize the object placed inside a tab control or the control tab itself.

  I have a few objects (controls, indicators, etc.) outside of the tab control, and they are resizable (I can see the dark blue squares and I am able to adjust the object); Instead, any object inside the tab control is still not resizable (when I select the dark blue boxes are not visible and I can't access the properties of the object by clicking with the right button of the mouse over it). If I have access to the properties of the object to the block diagram, the appearance of her-> frame size is gray and I can't change the size fields.

  It seems that something was changed when I try to adjust the minimum window size and appearance of windows in the proposals of VI, but I restore the previous values...

  How can I solve this problem?

  Sure, tab control is not locked.

  If the tab control is locked that resize is not possible

  Lucast85 wrote:

  Hi all

  Since this morning I noticed that I can't always resize the object placed inside a tab control or the control tab itself.

  I have a few objects (controls, indicators, etc.) outside of the tab control, and they are resizable (I can see the dark blue squares and I am able to adjust the object); Instead, any object inside the tab control is still not resizable (when I select the dark blue boxes are not visible and I can't access the properties of the object by clicking with the right button of the mouse over it). If I have access to the properties of the object to the block diagram, the appearance of her-> frame size is gray and I can't change the size fields.

  It seems that something was changed when I try to adjust the minimum window size and appearance of windows in the proposals of VI, but I restore the previous values...

  How can I solve this problem?

• Resize an object: ALT + CMD + SHIFT does more work in CC15 mac?

  Hello

  Before, in CC14, when I wanted to resize an object or a group of objects by keeping its proportions, I simply used the keys CMD + ALT + SHIFT while I resize the object with one of their corner. (with my mouse)...

  Now, I've just updated to CC15 and this function no longer works?

  I have to configure something in preferences to retrieve this basic function?

  Thx for your help! I lose a lot of time without this basic function...

  It is almost always caused by third-party software that you are running. A common problem are extensions of browser that are striking strikes. Restart your computer and run InDesign before any other program, and it will probably work fine.

  If it does not create a new user on your computer and run InDesign from the new user.

• Opens a file someone else you want to resize an object, it is larger that the artboard, how can I get rid of the artboard

  Opens a file someone else you want to resize an object, it is larger that the artboard, how can I get rid of the artboard

  Marvin,

  You can view > hide the work plan, but why not just put to adapt to what you want?

  You can do this in the file > format Document, or with the tool of workplan according to version.

• Positioned on a Macbook Pro, the handles to resize the objects are missing?

  Positioned on a Macbook Pro, the handles to resize the objects are missing?

  With the move tool selected, you have to display controls to turn checked in the options toolbar?

• How to resize an object and show on stage

  Im trying to resize a simple object according to what dimensions I set, but it does not work.

  so now the stageHeight and width is 600 x 600 and it still does not work.

  And how do I resize the object immediately when the SFW load (so early, it will be 3 times bigger)

  I have a MainClass with this code

                          public var  rescaleRatio:Number = 1;
                      public var _element1:CreateRow_Col
  
                      public function MainClass_Test() {
                      addEventListener(Event.ADDED, init);
                      _element1 = new CreateRow_Col(rescaleRatio)
                      addChild(_element1)
                      }
  
                      public function init(e:Event):void{
                                 stage.scaleMode = StageScaleMode.NO_SCALE;
                                   stage.align = StageAlign.TOP_LEFT;
                                   stage.addEventListener(Event.RESIZE, setUpScreen);
                      }
  
  
                      public function setUpScreen(ev:Event):void{
                                stage.removeEventListener(Event.RESIZE, setUpScreen);
                                if(stage.stageHeight > 500){  
                                          rescaleRatio = 3;  
                                }else 
                                          rescaleRatio = 5;  
  
                      }
  
  

  and the CreateRow_Col class has this

  public class CreateRow_Col extends Sprite {
  
                      public var theAppliedScale:Number;
                      public var myObject:BG = new BG()
  
                      public function CreateRow_Col(reScalling:Number) {
                                theAppliedScale = reScalling;
                                addEventListener(Event.ADDED_TO_STAGE, zzz);
                      }
  
  
                      private function zzz(e:Event):void {
                                removeEventListener(Event.ADDED_TO_STAGE, zzz);
                                myObject.scaleX = myObject.scaleY = theAppliedScale
                                addChild(myObject)
                      }
  

  Copy the following code and paste it into your document class:

  package {}

  import flash.display.MovieClip;

  import flash.events.Event;

  SerializableAttribute public class MainClass_Test extends MovieClip {}

                          public var  rescaleRatio:Number = 1;
                    public var _element1:CreateRow_Col

  public function MainClass_Test() {
                      addEventListener(Event.ADDED, init);
                   
                      }

  public function init(e:Event):void{
                                 stage.scaleMode = StageScaleMode.NO_SCALE;
                                   stage.align = StageAlign.TOP_LEFT;
                                   stage.addEventListener(Event.RESIZE, setUpScreen);
  setUpScreen(null);
                       }

  public function setUpScreen(ev:Event):void{
                                if(stage.stageHeight > 500){ 
                                          rescaleRatio = 3; 
                                }else
                                          rescaleRatio = 5;

  }


   if(!_element1){ _element1 = new CreateRow_Col(rescaleRatio);                    addChild(_element1)} else {_element1.zzz(null);  //<-make zzz() public in your other class.}
  

  }

  }

  }

• How to resize the object + text lighting

  Hello

  1 lately, I can't resize an object.

  The surrounding border of the object is with filled rectanglers and

  not with rectangler hollow. So, I can't resize objects - how can I solve this problem?

  2. when I try to mark the text, there score perfectly but I do not see the location eventhough I choose what he.

  How can I mark the text and display the marked text (marked selected text)

  Kind regards

  Koko Fiko

  Koko Fiko,

  You can open the view drop-down list and check out the edges and Bounding Box (both must hide, indicating the possible action, implying that are displayed).

  According the description I'm not sure who can apply.

• How to reference the layout object in the program unit?

  Hello world
  
  I'm changing the outcome of the result of a F_Test_Result1 field, so I create a trigger of format for it, the code is showed in below:
  
  function boolean return F_Test_Result1FormatTrigger is
  Start
  If F_TEST_Result1 = "0" then
  F_Test_Result1: = "Pass";
  end if;
  return (TRUE);
  end;
  
  but the Report Builder returns error saying F_TEST_Result1 is not yet defined. so, how can I do to direct these layout object and the object of data (from the data model) in triggering?
  
  Thank you
  Bryan
  
  Published by: Bryanevil on April 22, 2009 20:50

  Hello

  I suggest to create a column formula in the group that contains the column PASS_FAIL_SUMMARY

  and use a PL/SQL code like this for the column in the formula:

  function CF_1Formula returns the Char type is
  Start
  If: PASS_FAIL_SUMMARY = '0' then
  return ("pass");
  on the other
  Return('--');
  end if;
  end;

  Then, set the column formula as a Source for the field in the layout.

  Concerning

• Resizing an object to adapt to another object proportionally. How?

  Hi, thanks much for reading! Long user Illustrator but I realized that I don't know how to do something very basic. I want to resize a group of objects to adapt to another object, without using the units of pixels or cm (all the vectors/parent). Here is a short animation showing what I want to do [click the first image to see animation]

  

  As you can see, it is impossible to say when you have reached the correct place, because it is not in line with the other object when you use the resize tool.

  

  Jacob Bugge wrote:

  ...

  (2) select the object to scale, set up the scale tool, click on the upper left corner to maintain, and then drag the lower right up to him, commented to show the way, and then the Smart Guides will tell cross when you are there, on the right of the context object path segment.

  ...

  Ah ha, so, the Smart Guides like now Shift!  Because now with Shift will remain not the point to be broken under the cursor, and it won't work. I guess they have developed smart guides to work without using all the other constraints. It also works if you drag right to the edge and after the intersection with her along the edge where it intersect with the diagonal of the object to scale - it may be preferable for the amounts small scale where the smart guides label hiding the diagonal line. And I guess that the eye may be good enough for most cases.

  Also, when I tried it it did not for me, because in the Smart Guide preferences section transform tools were not verified. Maybe it's my settings, but I can never remember to turn it off, it can be turned off by default.

  Good tip, Jacob! Thank you

• Resize the object inside the tab control

  Hello

  I have problems with the design of a user interface. I need to have multiple controls resize with panel inside a tab control.

  I see it right, there is no way to have a resize done inside a tab with decorations control that separates controls?

  I have not yet checked LabVIEW 2013.

  I have attached a vi in LV2012 as an example.

  Thanks in advance.

  Yes it is a feature I've wanted also over the years.  Here's the first result that I got from the exchange of idea, but I think that there are duplicates autour.

  http://forums.NI.com/T5/LabVIEW-idea-exchange/ability-to-fit-scale-object-within-tab-control-page/ID...

  Basically, you can't do nativly but you can trick it work for you.  You make a tab that is false the user interacts with, changes to the value of another tab that things in it and then you fix every thing you want it is in the tab where it is demonstrated.  This works well if the thing in your tab is an element able to evolve to adapt to it, but if in a tab, you have a chart and another you have a bunch of buttons that should not change, then you will get a strange behavior.  You can tell the chart is more scope to this component, but then you lose the 'ladder while resizing objects' that make a lot more native user interface research.

• How to resize an object and also to mitigate the effects (transparencySettings)?

  I want to to scale an object through script but also effects nationwide, currently my resizing does not only. My effects are TransparencySetting: drop shadow, inner glow, outer glow.

  For example using the following does not work:

  pdf.resize(CoordinateSpaces.innerCoordinates, AnchorPoint.topLeftAnchor, ResizeMethods.multiplyingCurrentDimensionsBy, [pointSizeScale, pointSizeScale]);
  
  

  I have to resize the effects that I have at hand for example:

  thisObj.transparencySettings.dropShadowSettings.xOffset = dSXYOffset*pointSizeScale;
  thisObj.transparencySettings.dropShadowSettings.yOffset = dSXYOffset*pointSizeScale;
  thisObj.transparencySettings.dropShadowSettings.size = dsSize*pointSizeScale;
  

  Thanks in advance!

  I think that by using a transformation matrix will solve your problem (pdf.transform (.))

• Why the settings of documents began to resizing of the Center? Can I change this back?

  Since I've updaed to the latest version of InDesign, when I go to change the height of the page in my configuration of document it resizes now from the center of the document rather than the upper part. This means for the publication I work on if I'm going to change the height of the page, where as it used to give me a nice bit of space at the bottom to add extra content now means that I have to move everything back up every time I have to resize the page.

  I don't really understand why this change was made, it is very useless. Is it possible to fix it?

  Select the pages from the side of the page, then use tool with the top point of reference Page.

• a question on a resizable loaded object

  Guys...

  I was searching on the website on how to make an auto Resizable screen, so it feet on many devices regardless of their size and I found a tutorial that adds the image to the Flash library and it resizes according to the size of the screen...

  Now, I have removed the object from the library and changed the var "bitmap" of the tutorial for a "Loader", so the image is not in the library...

  My only problem is that when you try the swf, the image is all over the screen and fits on it after enlarge you or reduce the size of its...

  Then, how the image can be in the right place at first?

  (The tutorial had as an event trigger a mouse click... I changed it to a timer event and at my peak was in the library it worked fine, but now I have to resize the windows so that it works)

  Here is the code:

  Main class

  package {}

  Import org.display.OffsetResize;

  import flash.display.Sprite;

  Import 12345678910111213import;

  import flash.display.StageAlign;

  import flash.display.StageScaleMode;

  import flash.events.Event;

  import flash.events.MouseEvent;

  import flash.utils.Timer;

  import flash.events.TimerEvent;

  import flash.display.Loader;

  import flash.net.URLRequest;

  SerializableAttribute public class Main extends Sprite {}

  private var _bg:OffsetResize;

  private var t:Timer = new Timer (0,0);

  public void Main (): void {}

  If (internship) init();

  of another addEventListener (Event.ADDED_TO_STAGE, init);

  }

  private void init(e:Event=null):void {}

  stage.scaleMode = StageScaleMode.NO_SCALE;

  internship. Align = StageAlign.TOP_LEFT;

  var photo: Loader = new Loader();

  Picture.Load (new URLRequest ("FIN1.jpg"));

  _bg = new OffsetResize (picture, OffsetResize.MIN);

  stage.addChildAt(_bg,0);

  _bg.stage.align = StageAlign.TOP_LEFT;

  t.addEventListener (TimerEvent.TIMER, resizeada);

  t.Start ();

  }

  private void resizeada (TimerEvent): void {}

  _bg.offsetType = _bg.offsetType is OffsetResize.Max? OffsetResize.MIN:OffsetResize.MAX;

  t.Stop ();

  }

  }

  }

  Class OffsetResize

  package org.display {}

  import flash.display.Sprite;

  import flash.display.DisplayObject;

  import flash.events.Event;

  SerializableAttribute public class OffsetResize extends Sprite {}

  public static const MAX: String = "max."

  public static const = "min" MIN:String

  private var _offsetType:String;

  public void OffsetResize($child:DisplayObject,$offsetType:String="max"):void {}

  _offsetType = $offsetType;

  addChild ($child);

  If (internship) init();

  of another addEventListener (Event.ADDED_TO_STAGE, init);

  addEventListener (Event.REMOVED_FROM_STAGE, end);

  }

  private void init(e:Event=null):void {}

  stage.addEventListener (Event.RESIZE, stageResize);

  stageResize();

  }

  private void stageResize(e:Event=null):void {}

  var px:Number = stage.stageWidth / width;

  var py:Number = stage.stageHeight / height;

  var div:Number = _offsetType == 'max '? Math.Max(PX,PY):Math.min (PX, PY);

  Width * = div;

  height * = div;

  x=(stage.stageWidth/2)-(width/2);

  y=(stage.stageHeight/2)-(height/2);

  }

  private void end(e:Event):void {}

  stage.removeEventListener (Event.RESIZE, stageResize);

  }

  public function set {offsetType(type:String):void}

  _offsetType = type;

  If (stage) stageResize();

  }

  public function get offsetType (): String {return _offsetType ;}

  }

  }

  Thanks in advance!

  Try:

  Main class

  package {}

  Import org.display.OffsetResize;

  import flash.display.Sprite;

  Import 12345678910111213import;

  import flash.display.StageAlign;

  import flash.display.StageScaleMode;

  import flash.events.Event;

  import flash.events.MouseEvent;

  import flash.utils.Timer;

  import flash.events.TimerEvent;

  import flash.display.Loader;

  import flash.net.URLRequest;

  SerializableAttribute public class Main extends Sprite {}

  private var _bg:OffsetResize;

  public void Main (): void {}

  If (internship) init();

  of another addEventListener (Event.ADDED_TO_STAGE, init);

  }

  private void init(e:Event=null):void {}

  stage.scaleMode = StageScaleMode.NO_SCALE;

  internship. Align = StageAlign.TOP_LEFT;

  var photo: Loader = new Loader();

  picture.contentLoaderInfo.addEventListener (Event.COMPLETE, resizeada);

  Picture.Load (new URLRequest ("FIN1.jpg"));

  }

  private void resizeada(e:Event):void {}

  _bg = new OffsetResize (picture, OffsetResize.MIN);

  stage.addChildAt(_bg,0);

  _bg.stage.align = StageAlign.TOP_LEFT;

  _bg.offsetType = _bg.offsetType is OffsetResize.Max? OffsetResize.MIN:Offs etResize.MAX;

  }

  }

  }

• "Bleeding" colors during a resizing smart objects

  Bit of a strange, that. In Photoshop CS6, whenever I create a dynamic object with the intention of resizing, whenever I reduce it, where a flat color collide with one another, it creates a really ugly "bleed" - kind of the same effect you get when you take a little picture and try to enlarge:

  

  I zoomed in on this part to show how bad it looks. Especially on the upper part of the forearm, see how he got some kind of 'halo' white before the black outline? It now seems that I drew a slightly darker outline around all levels of shading, and it seems really bad, almost like a raised/carved effect.

  Of course, it is not as noticeable when zoom you out, but this is. If it helps, I noticed the same thing happens when I just resize the image using "automatic bicubic", but when I select "bicubic / nothing else", the purge does not occur. Kind of makes the tool once incredibly useful dynamic object little pointless now.

  This never happened with any other previous version of Photoshop which were dynamic objects and I barely got hands on CS6 a few days ago so if there is a preference/really obvious setting or something that I'm missing, please let me know

  Thanks in advance x

  Resizing of the smart object uses the method of interpolation image defined in preferences > General. The default value changed between CS5 and CS6, and many people don't like change.

  CS5 has by default the bicubic.

  CS6 is by default set to automatic bicubic. Auto translates Bicubic Sharper when reducing the pixel dimensions and bicubic smoother at the pixel dimensions increase. Bicubic Sarper tend to oversharpen and create ugly artifacts like the halo that is plagueing you.

  Set preferences in CS6 to simple to make as CS5 bicubic.

  CS6, free transform now also has an independent for interpolation control when pixelated layers are being targeted. He is set to bicubic automatic by default, so simple that bicubic value, too.

• How Trim on an edge of an object

  Nice day

  I have two secant objects, one of which I merged.

  Problem is that the merged object has a pertruding edge, I want to cut, but I can't. I tried to draw a rectangle on the unwanted part,

  but for some reason, the rectangle or any way I try to do around that edge, it moves to the left, as if it's magnetism. I don't know if it's because

  I'm too zommed, but there must be a way to intersect the two perfectly...

  See the image below

  Thank you

  

  A kind of alignment must be turned on. See the view menu and see the transformation Panel and menu for 'snap to grid' or 'snap to grid of pixels.