Edict of MS-DOS to Windows 7 64 bit

Similar Questions

• Paradox 4.5 for DOS under Windows 7 64-bit.

  We run Paradox 4.5 for DOS on XP without any problem. We got a new 64-bit Windows 7 machine. It will not run in compatibility because of the 64-bit mode?

  C:\Documents and Settings\XPMUse
  'PARADOX.exe' is not recognized
  operable program or batch file.

  You will need an emulator LIKE DOSBox. It should load and run in Windows 7 x 64, but you may need to get XP mode.

• Why dose my window have a gap and will not drag down or up to the screen adjustment?

  my window has a gap, that departure is at the bottom, but there is a gap and I can't drag it to get it to connect. And when I try to get the mouse to go to the

  First, I have a very difficult time for the mouse it my mouse bounces up and down. And the dose of window left adjustment right upstairs downstairs.
  I'm going nuts help me please thanks Aja'

  Hello

  Were there any changes made to your computer before this problem?

  To change the display settings, you can try the following steps.

  Method 1:

  Graphics card:
  
  You can uninstall and reinstall the graphics card. To do
   
  1. click on start and then run.
   
  2 type devmgmt.msc, and then press ENTER.
   
  3. the Device Manager will open and you will see graphics card listed.
   
  4. right click on the graphics card and click on uninstall.
   
  5 restart the computer.

  Method 2:
   
  See the link below.

  How to change the appearance of items on the desktop in Windows XP
   
  http://support.Microsoft.com/kb/310543

  Method 3:

  You can also download and install the latest drivers for your site of manufacturers of computer or on the web site of display adapter manufacturers.

  Method 4:
   
  You can try to restore your computer to an earlier point in time when it was working fine. To do this, you can follow the article below:
   
  http://support.Microsoft.com/kb/306084
   
  Please read the article before proceeding with the restoration of the system.

  Hope this information is useful.

• Error invalid ms - dos function windows vista

  Everytime I try and copy/move/delete a file to or from my 2nd hard drive I get the "invalid MS-DOS function" and try new screen.

  I don't know what the issue is:
  But I know that I had a problem with the silver light recently, and then these questions began to appear.
  Does anyone know whence this invalid ms - dos function?
  Or what is the solution?
  I am currently running windows vista 32 bit
  AMD athlon 64 x 2 dual core processor 5600 + 2.8 ghz
  3 GB ram
  Local disk C 500 gig
  Local disc D 1.5 terabyte
  The error appears whenever I try to copy my C drive on my D drive.
  I also ran tools disk and made some error checking.
  I don't know what else to do.
  Y at - it another program I could download that could possibly help with errors?
  OR is there another solution for this problem?

  Hi TechDavidC,

  Please take a look at the article here with a possible fix for your problem.

  I hope this helps!

• run MS-DOS programs in Windows VISTA 64-bit

  You want to run old DOS program on a computer with Windows VISTA 64-bit operating system.

  Hi BrynMawr,

   

  64-bit Windows supports all 16-bit applications, so you will not be able to run the MS-DOS program based on 64-bit Windows.

   

  I hope this helps.

• Upgraded version of dose of windows 8 solve my problem?

  I bought a laptop from China with windows 7, but after the upgrade, I had true notice that my copy of windows is wrong, now I want to buy a windows SharafDJ 8, upgraded version of dose of windows 8 solve my problem?

  Well, technically Yes, given that Windows 7 would be regarded as a product calling. Windows 8 does not verify the authenticity of the qualification license, also the fact that it's a laptop, so it must have been licensed authentic in the first place, be it Windows XP, Vista or Windows 7.

  In order to that upgrade you a genuine license (Windows 8), buy at the following link:

  http://www.Windows.com/buy

• Foxprox for the Dos Version works only in Windows 7 64 Bit Version

  Original title: Foxprox for the Dos Version works is not in Windows 7 64 Bit Version... there at - it solutions without dosBox or ExDos...?
   
   
  I have the software in Version back Foxprox... It's good up to windows Xp and Windows 7 32 bit...
  But now the problem is... When I loaded Windows 7 64 bit...
  How can I use my package without change to 32 bit...

  are there solutions without dosBox or ExDos...?

  Hello

  Welcome to the Microsoft Community Forums. According to the description, you are unable to work with Foxprox for the Dos Version under Windows 7 64-bit.

  Allows Windows XP Mode you use older applications that are not compatible with Windows 7 or not compatible with a particular architecture of Windows 7 (such as Windows 7 64-bit). You can install each Dos application in XP compatibility mode. The steps are as below:

  Reference:

  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=0ee2a17f-8538-4619-8d1c-05d27e11adb2&displaylang=en

  Note: Make sure that you use a version of Windows 7 Edition home premium or higher.

  Keep us updated on the status of the issue. If you have questions/suggestions more associated with Windows, feel free to post.

• When my computer is updated before stopping, my friend, turning off the laptop. Now, my laptop does not work. He said dose explore window does not. I can not open any program.

  When my computer is updated before stopping, my friend, turning off the laptop. Now, my laptop does not work. He said dose explore window does not. I can not open any program. What should I do? Please help me. Thank you

  Hi TaiNguyen95,

  ·         Have updates you installed?

  ·         What is the full error message?

  Follow the steps provided by Keith from the link.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

• The query results wrap in the DOS command window.

  Greetings,
  
  I'm using SQL * MORE in the DOS command window.
  
  The results of my query is wrapping to the bottom of the page, instead of using the entire width of the window.
  
  I put the mode command windows, before entering SQL * MORE:
  MODE CON: COLS = 100 LINES = 40
  
  So, I was hoping to get Oracle to use all 100 columns, displaying the entire response.
  
  Kind regards
  Dave

  Hi Dave,.

  Size pages, columns and lines are controlled by SQL * more system variables

  For the width of the lines

  The VALUE [IZE] which defaults to 80 LINES

  For the number of lines per 'page '.
  PAGES of the [IZE] VALUE, which by default is 14

  To control formatting, including the width of the columns of indicidual you PASS [UMN], for example:

  COLUMN your_column FORMAT a20

  For more parameters:
  http://download.Oracle.com/docs/CD/E11882_01/server.112/e16604/ch_twelve040.htm

  If you want some settings each time you open SQL * Plus, you can add to your glogin.sql

  Concerning
  Peter

• Windows 7 32 bit does not start after the installation of the need for assistance

  I have an iMac 21.5 inches (mid-2011) with 8 GB Ram, 2 TB SSHD, new HL-DT-ST DVD - RW GA32N and tried to install windows 7 (32 bit) on using Boot Camp Assistant.

  I already downloaded and copied software 4.0.4033.zip Boot Camp here-> https://support.apple.com/kb/DL1630?locale=en_US for my 16 GB Pen Drive MS-DOS (FAT32)

  The installation was successful, and windows 7 loads just fine 1st time, I created UserID and password, settings etc... using the apple keyboard then installed the drivers from apple on this issue of my 16 GB USB key. Seems my Magic Mouse works but my keyboard is not detected

  Then I tried to restart so the changes would come into force, and since then my Windows will not start or run Windows 7

  Now if I start my iMac hold down the Option key, I get Macintosh HDD, windows, recovery 10.11.4 and DVD. If I select Windows or Windows DVD it starts Booting then black screen followed by this Message on the screen «Press a key to boot from the CD or DVD...» »

  If I press any button it starts booting from DVD and gives me the option to install Windows and if I do not press a button some then nothing happens

  Windows does not start a BootCamp HDD and I'm left with no option but to press on the button / stop to stop iMac.

  Fortunately my El Capitan works well, but my Windows will not start. I tried 2 times install windows 7 32 Bit on my BootCamp HDD.

  So any help, I do not understand what am I'm doing wrong, I would be really grateful if someone who knew bootcamp can guide me so that I can run Windows OSX on my iMac.

  Thanks in advance.

  Remove the DVD, boot in OSX and after the release of the following Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• I need a driver for my 1280 Deskjet on Windows 7 64 bit

  I always have a problem to find a driver for my printer Im HP Deskjet 1280 with Windows 7 64 bit operating system. Can someone help please.

  I need it for my new computer HP Pavilion P6-2021UK.

  Stem

  What version of Windows 7 do you have?  (Open a DOS window and type WORM.)

  Try the following: start, devices and printers, adding a printer, add a local printer, LPT1: (just as a placeholder), then, and then click Windows Update.  Your computer must be connected to the internet.  It may take a few minutes for the current list, once it is click on the HP manufacturer (not HP) and scroll down beyond the Designjet 800PS printer Deskjet 1220C.

  If for some reason you can't get the driver via Windows Update is also available on the Windows Catalog Site but this site is a little awkward to use.  The HP 1220C driver can be downloaded from the Site catalog Microsoft Update here.  You should not use IE, this site does not support other browsers.  The x 64 version of the driver is the one who is 11.6 Mb, the smaller is the x 86 driver and the largest is for the rare IA-64 architecture.  In this case, you save the file downloaded from the Microsoft website, and then extract the files into a working directory.  When you add the printer select the option "have disk" and point to the file where the driver was previously extracted.

  

• 22-3105nq HP: drivers for windows 7 32 bit

  Support dear HP team,

  Currently, I bought all in one HP 22 - 3105nq - Free Dos system and I decided to install it on windows 7-32 bit ultimate as operating system.  The problem that I face now is that I can't find the drivers for windows 7-32 bit.  Please help me find the right drivers.

  Is very much apprecieted that help you.

  Thank you

  Ion

  In view of your PC and your particular situation, if the upgrade of your operating system is not the best solution for you, it is also possible to manually download all the drivers from the official website of each material supplier.

  I have just listed sites for each driver below:

  Intel Proccessor and chart: https://downloadcenter.intel.com/es/product/78927/Intel-Core-i5-4460T-Processor-6M-Cache-up-to-2-70-GHz-

  Realtek High Definition Audio: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1 & PNid = 14 & PFid = 24 & Level = 4 & Conn = 3 & DownTypeID = 3 & GetDown = false

  Realtek Gigabit LAN: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTypeID = 3 & GetDown = false

• Applications that use msxml do not load or use Windows 7 64-bit environment

  What happened several times. I have an installed application (Quickbooks pro 2010) that uses MSXML, and when I installed another application that uses MSXML, it fails to install, or install but does not work properly. (Both applications are supposed to be compatible with Windows 7)

  Is this a known issue?

  Hi Emanders,

  You receive an error message when you try to install or run programs?

  Who is the other program that fails to install or load?

  Access the link below and check if the programs are compatible with Windows 7 64 bit.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  However, you can try to unregister and reregister the MSXML.dll files on your computer and check if you can install and run programs.

  Run the command at the elevated command prompt, follow these steps:

  1. open the start menu, click programs principally made, select accessories.
  2. right click on command prompt, and then click "run as administrator".
  3. type the following commands in the DOS prompt window and press ENTER at the end
  of each line:

  REGSVR32 MSXML3. DLL/U
  REGSVR32 MSXML3. DLL
  REGSVR32 MSXML4. DLL/U
  REGSVR32 MSXML4. DLL
  REGSVR32 MSXML6. DLL/U
  REGSVR32 MSXML6. DLL

  (At the elevated command prompt command should not give us any error).

  You can also open the event viewer and check if there are other important messages/error codes that is generated during installation or execution of the program and after return.

  See the link below for more details:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 64 bit damaged, no backup, no repair disc, no set of recovery, no picture,

  My granddaughters computer laptop K53E from ASUS (2010 purchase) with Win7 64 (home?) has stopped working and has not been used for about 2 years.  Not record it, no set of recovery or repair, no image or backup.  He now needs - hard drive was full with games and some viruses.  I've released the space and got rid of the virus.

  Update Windows automatically downloaded around 150 updates - it wouldn't let me select this option to install only some, then they all begin to install, almost done when windows crashed and could not even get a DOS command prompt.  No recovery no worked configuration option.

  I used Win7 64 bit Pro drive my son (came with his HP ProBook) to install Windows and located all ASUS from ASUS.com drivers.  But now I can not activate Windows.  I tried the license key from the sticker from ASUS (for don't Win 7 64 Home / Premium (?)) No dice.  Tried the Win7 Pro 64 of my son disk key and no dice.

  She paid for a license of Windows 7, when she bought the ASUS K53E.  Single MOM at 30, she goes back to the school and broke.

  Is it possible that she can turn it on Windows7, or some other way to get a short operating system to purchase $130?

  Thank you.     n

  You own a poorly installed edition and you used a HP disc reinstall. You must specifically download and reinstall Windows 7 Home Premium 64-bit.

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  If you can't get this edition, you can consider switching to Windows Home 64 bit 10:

  How to download official Windows 10 ISO files

  then

  How to: perform a clean installation of Windows 10

• Dependencies Microsoft MSVC 1.52 under Windows 7 64-bit

  Is it possible that I can install and run MSVC 1.52 under Windows 7 64-bit? I need to run this application to support a number of 16-bit DOS applications and I get tired carrying two laptops in the world.

  He ran under Windows 7/64 PRO XP mode or is the problem more to do with the dilated not supporting 64-bit not 16-bit.

  Thank you

  64-bit Windows does not support 16-bit applications natively.

  Assuming the program works under Windows XP, you can try XP mode since it will run as the 32-bit Version of Windows XP.