Edit config.sys in windows 7

Similar Questions

• Error c:\config.sys\77803.rbf and error 7370 when installin Apps in Windows Vista.

  Original title: cannot install applications on windows vista home edition - error writing to file c:\config.sys\77803.rbf, error 7370

  I have windows vista home edition. When I try to uninstall some games or other applications that I don't have, I get an error saying "error writing to the file c:\config.sys\77803.rbf, 7370 error. Can you help me on this

  Hi Robert,.

  Welcome and thank you for the post about Microsoft Community.

  It seems that you are unable to install games on Windows Vista that you found the error.

  Please provide me with the following information.

  (1) you get this error during installation or uninstalling of an application or a game?
  (2) with what game do you meet these question?
  (3) you get the same error with all games?

  Please follow the troubleshooting steps listed here.

  Method 1: Run the fix it given in the link here and try to install the game.

  Automatically fix problems of installation of program installation or remove program fails because of the installation blocked or corrupted registry keys.

  http://support.Microsoft.com/mats/program_install_and_uninstall/?WA=wsignin1.0

  For reference, please see the following link.

  http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program

  Search for the question, if it persists, then pass to the next method.

  Method 2: Turn the computer in clean boot and try to uninstall or install the game.

  Perform a clean boot to verify if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts. Follow these steps in the link below to start the computer in a clean boot.

  See this link:

  http://support.Microsoft.com/kb/929135

  Note: after the resolution of the problem, reset the computer to start as usual. See step 3 of this link.

  Method 3: Run Microsoft Safety Scanner.

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: during the analysis of the disk hard if bad sectors are found, the parser attempts to repair this area, all available on which data may be lost.

  I hope that solves your problem, please write to us if you have any other issue of Microsoft related to Windows.

• I get an error message saying "Windows cannot find config.sys.

  Original title: startup problem
  I am running XP I try to access my Start menu. My problem is that I get an error message saying "Windows cannot find config.sys.
  In search no config.sys happens.
  I'm tring to remove some startup problems
   
  Thank you
  Bob Delfino
  E-mail address is removed from the privacy *.

  Hi Bobdelfino,

  ·         Exactly when you receive this error message?

  ·         How long have you been faced with this problem?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Try to start the computer by using the last known good configuration, you can check the link for the steps below:

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Method 2: If this does not help, you may need to contact the manufacturer of the computer for technical support options.

  For the other troubleshooting steps, you can check the link below:

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Hope this information helps.

• SYSTEM WILL NOT BOOT: error in file/window/sys32/config/sys registered: 0Xc000014c

  I can not get a command code:

  SYSTEM DOES NOT BOOT:

  error in file/window/sys32/config/sys registered: 0Xc000014c

  I ran each sys, check, all right...

  SUGGESTIONS?

  Fact this link gives you ideas? What is the source of the ERD that I think you can try to use?
  http://social.technet.Microsoft.com/forums/en-us/itprovistadeployment/thread/50830310-2a38-4F27-95fb-df4ebc972f3b

• Lack of Config.Sys

  My Config.Sys file is missing, preventing me from starting Windows XP Home edition.  I don't have the original CD installs Windows suggestions.  Also, it appears that the laptop will not support Windows 7.  Thank you.

  Hi RJCF,.

  · Provide the exact error message or the error code that you receive when you try to start on the computer?

  Try to start the computer by using the last known good configuration, you can check the link for the steps below:

  How to start your computer by using last good known Windows XP Configuration:http://support.microsoft.com/kb/307852

  If this does not help, you may need to contact the manufacturer of the computer for technical support options.

  For the other troubleshooting steps, please see the link below: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• config/sys file is corrupted

  I am running windows xp Proffesional on 2 computers which are all two store bought. My other pc will now start after installing a windows update that required me to reboot after installation. Now all I get is "config / sys file is corupt or deleted." Insert the windows xp disk and press R to continue. "or something to that effect.

  Because I bought the preloaded pc they came not with all drives except the drive for the kaspersky antivirus protection.

  Is it possible to create a cd that can help me solve my problem? or am I watered and you need to take the pc to the hospital?

  I sought help from Microsoft, support, and all pages I can get to is how do floppy boots, and I don't have a floppy drive on a pc...

  Thanks for any help, Ron

  Assuming that you placed a part of an error message in the subject line, rather than post the error message in the body of your message _entire_, where it belongs:

  How to recover a corrupted registry that prevents Windows XP from
  From
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;307545

  Once you've recovered, you might want to look here as well:

  How to Troubleshoot Registry Corruption issues
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;822705

• config sys error

  I am using windows xp pro. Boot up I have a config sys error. When you try to repair it during the setup of windows disk boot, my keyboard stops when windows starts and I can't bring up the repair of the system. (or something else)

  Go into the BIOS and make sure that Legacy USB is enabled.

  John

• config.sys

  When I type in run: config.sys, I get a file not found error message

  Windows XP does not use the config.sys file.

  Why you try to open it?  There could be another way to do what you want.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• SFC reports VistaSP2 corrupt config.sys file

  I got the following message after running SFC.exe: CSI 00000230 [SR] could not reproject corrupted file [ml:520 {260}, l:12 {6}] '------? \C:"\[l:20{10}]"config.sys '; source file in the store is also corrupted

  My Compaq 8710p works well if the question above bother me or can I ignore it? The start is a bit slow and 2 icons in the Notification bar are sometimes missing (Volume and network) but for the rest OK?

  Thank you

  Config.sys is unlikely to be used on your computer. It cannot be read when using MS-DOS or Windows 3.1 programs (prior to 1995). It is not even important for most, but not all, of these old programs.

  Ignore it.

• Config.sys you need in Vista and what is its role?

  files Config.sys = 80 what config.sys done in Vista? 80 required for vista sp2 files config.sys = work?

  Hello

  A system used with MS-DOS or OS/2 file that is loaded every time the computer starts first upward. This file manages the components connected to the computer such as memory and other hardware devices.

  Config.sys has not been used since Windows ME and appears only in systems XP, Vista and Windows 7 for backwards compatibility

  It will be useful.

• Too many running 16-bit programs, increase the number in config.sys?

  I got this error last week with no solution can be found. I looked in my config.sys dialog box and saw no place to increase the FILES, and I have no idea where from here.

  MD

  Can we get your Event Viewer logs?  Are you running any 16-bit (old/legacy) apps?

  Please provide us with your administrative Event Viewer logs by following these steps:

  Click on Start Menu
  Type eventvwr in the find programs and files (do not hit enter)
  Click with the right button on eventvwr.exe and click Run as administrator
  Expand custom views
  Click the administrative events
  Right-click Administrative events
  Record all events in custom view as...
  Save them to a folder where you will remember which folder and save it as Errors.evtx
  Go where you saved Errors.evtx
  Make a right click Errors.evtx-> send to compressed (zipped) folder of->
  Download the .zip for Onedrive or a file sharing service file and link to it in your next post

  *
  If you have updated to win 8.1 and you get the error message " " " the system cannot find the specified file" it is a known problem.  The work around is to change the registry.  If you are not comfortable doing this DON'T.  If you are, save the key before making
  Press Win + 'R' and enter regedit
  
  Navigate to:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/analytical.

• How to use ANSI. SYS in Windows-7

  I wrote and still uses a number of spans BACK (DOS32) programs, some use the ANSI standard. SYS.
  Although Windows 7 has ANSI. SYS, use the way classic by a command

  Device =\ansi.sys

  in the CONFIG. SYS

  does not help.

  A file that replaces the CONFIG. SYS in Windows 7?
  I'll be able to access ANSI. Through this file SYS >

  Kind regards

  Rob.

  Hi PabuKowe,

  The question you posted corresponds to DOS programs and would be better suited to the MSDN Community. Please visit the link below to find a community that will provide the best support.

  http://social.msdn.Microsoft.com/forums/en-us/categories

  Aziz Nadeem - Microsoft Support

• Satellite Pro A60 does not start: missing or damaged config.sys

  Hello

  I turned off my computer Friday, I went back to his Monday - and it won't start. I thought that the config.sys file is missing or damaged.

  I tried all the usual methods - safe mode, last known good setting, OS etc, but none of it works. The computer does not recognize that the recovery CD is in the drive, either.

  As I don't have an original installation CD - the computer was shipped with the software already installed - I can't try either.

  I want especially to recover the entire system, but if I have to, I can live with that. Any suggestions would be welcome.

  Thank you very much.

  RONMAC

  Have you tried to boot your PC and press C after POST message? Recovery CD to be inserted.
  This C command forces the laptop to boot from ODD first.

  Maybe it works for you.

• Satellite M115-S30394 - config.sys file is corrupt

  I bought a Satellite M115 S 30394 is about 2 years.
  The first year he had 9 hard drives and Toshiba said they replaced the motherboard 2 times.

  It still does not work and the senario is first a message that the config.sys file is corrupt and after correcting it will work for a few days, then a message appears that the hard drive is about to fail and he does it in 2 days.

  I replaced because he couldn't be trusted in my company but I was wondering if someone has any ideas so that I can have as a spare.

  Thank you

  Hello

  If you get the message that the HARD disk fails, then it s advisable to replace it.
  But it s really strange question

  In any case, I never had this problem on one of my notebooks, but I think you should test the notebook with a new HARD drive.

  Good luck

• I have an Optiplex GX620, with windows XP Home edition, I can install windows XP PRO top?

  I have a virus that it needs formatting to remove. The pc running wondows xp home edition I can install windows XP PRO on it?

  Yes you can, but why?