Editing a site Flash need help!
I have a client who has a Web site that is run entirely by a swf file. Don't know where to begin to start editing. Can someone give me a hand to find where to start?
I need to be able to access the swf file and then convert the whole thing on something that will work on a smart phone and tablet.
[Moved from the forum endorsement, general Lounge - Mod]
If you nose around in the project files, you might find an XML file or text gross with real content in what you could bring in a new HTML site. All the Flash stuff should be eliminated because it is not web friendly. Also, Dreamweaver cannot change Flash sites.
Nancy O.
Tags: Dreamweaver
Similar Questions
-
New to Flash, need help.
I'm new in the world of Adobe Flash and who need help. I have a banner rotator fla file is an xml file to produce the content. My question: How can I rename the file "config.xml" in "BannerConfig.xml" xml and still have it work with the flv file?
We need a code in the FLA somewhere that specifies the name of the file to edit. The code must be on the time line of the (or a). If you see a frame (or frames) in the calendar that has a lowercase 'a' in this document, select this image and open the Actions window to view the code. It is always possible that the code inside a movieclip as well. And if the file uses AS2, it could even be attached to a symbol on the stage, in which case you will need to select the symbol on the stage, while the Actions panel is open to see the code.
-
New to Adobe Flash, need help with a simple coding
I'm new using Adobe Flash and need help. That means class static type?
static text is entered in the authoring environment. This is the text that will not change (that's why static) during execution.
This is in contrast to the dynamic text, which is text that is assigned using actionscript and can change at any time actionscript runs.
-
Modify Web site template flash - need help
Hello! I'm about to buy a flash Web site template. Before buying the model I want assure you, that I am good enough to change it to my needs.
I downloaded a free flash template and I tried to change it in my Flash CS5.
I had a lot of trouble to change and I can't figure out yet how to change images or text.
Can someone help me and maybe give me a little tutorial on how to change the model.
Link to the model: http://www.flashmo.com/preview/flashmo_247_3d_touch_ring
Thank you!
The photos are taken from a XML file. Open the XML file flashmo_247_photo_list"in dreamweaver and look at the code, it will be easy to figure out if you've never done any kind of HTML codes.
Just in case you have'nt look for example below taken from the xml file that was supplied with the .fla file
"
"
s_photo_003.jpg Change image name for a thumbnail here i.e. directoryname/imagename.png etc.
photo_003.jpg Change the name of the image for a large picture here i.e. directoryname/imagename.png etc.Title photo 03 Insert here the title photo 03 Here you have the possibility of having a discription on the image, I usually just the name of the image.In urna total, convallis id, pharetra in, sold sit amet mi Praesent 195kgs mauris imperdiet. Suspendisse pulvinar laoreet lorem vel faggot. Etiam and neque. Donec dapibus viverra EST.
This text is dynamically loaded from the external XML file. This textfield supports HTML and CSS.
[]] >
-
I have the following message come upward during the visit of my mobile site, I need help!
When visiting my website on a mobile device this message, ('some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please contact author Web site. »)
I talked to my hosting company and they say it's to do with the script and this must be changed. They gave me a link to a Web site with instructions. CodingForums.com as with most people using Muse the reason we use it is because there is no need to use the code. I don't really have no where to start with this.
Y at - there anyone out there that can help me.
Thank you
Very difficult for anyone to provide assistance without the URL of your site.
-
Rookie Flash needs help with error messages when you perform a simple calculator in AS3.
I'm doing a simple calculator I followed this guide:
http://www.YouTube.com/watch?v=5k3h37YKZJI
It's my code.
var Hnum:String;
var PCnum:String;
var calc:Number = 25;
var Total: String;
NUM1. Restrict = "0-9";
num2. Restrict = "0-9";
Est_btn.addEventListener (MouseEvent.Click, Calculate);
function calculate(event:MouseEvent):void {}
Hnum = num1.txt;
PCnum = num2.txt;
Total = parseInt (Hnum) * calc;
Total.toString ();
Total_txt. Text = String (Total);
}
I get 3 errors:
Scene 1, Layer 'Actions', frame 1, line 14 1067: constraint implied a value of type flash.text:TextField to a type unrelated to a String. Scene 1, Layer 'Actions', frame 1, line 15 1067: constraint implied a value of type flash.text:TextField to a type unrelated to a String. Scene 1, Layer 'Actions', frame 1, line 16 1067: constraint implied a value of digital type to type String unrelated. I have two areas named num1 and num2 and box input text and dynamic text named Total_txt.
This should be so simple, I don't really know what im doing wrong?
Any help would be really appreciated.
MrB
If you look at the tutorial, I think you will see that you are using "txt" where "text" is needed. 'text' is a property of a textfield, identify the text that contains the textfield object. I don't know if you're doing something where the num1 object contains another object named txt, but I think that my first sentence catches the problem.
-
I'm new construction sites and need help with boxes of zoom
I'm currently building a website with a shopping cart, before getting to the basket I'd like to see an option for expansion of each element. They see the regular image and then if I could add a button they can click to view a larger image. Unfortunately I do not have the Web site on a server at this time. Any help you can give me would be appreciated. Thanks in advance.
Try this:
http://ALT-Web.com/demos/jQuery-disjointed-image-gallery.shtml
Nancy O.
ALT-Web Design & Publishing
Web | Graphics | Print | Media specialists
http://ALT-Web.com/
http://Twitter.com/ALTWEB -
Sequence Flash - need help!
I'm creating a home page to a website in Flash.
Here is the sequence I want to achieve:
1. (page loads) - only the background image should be seen for about 1 second.
2. a menu box translucient takes place (above the background, in a time of about 1 second) with two options of hyperlink inside.
3. If the cursor flies over the unfolded menu area, the background in black and white - in about 1/2 sec. period of time, and if the cursor moves away from the menu area (refer to the background), the background changes back to its normal color (in the same sequence of color change of 1/2 sec.).
4 If the cursor on one of the options then menu box, the text changes color.
So far, I've tried the menu but the sequence takes place is not very smooth. Ideally, the box would start with a 1 pixel dot, spring both ways horizontally in a row and then spread out in its full size. But I can't seem to get the firing of the pixel movement in a line of more - the pixel becomes just a line.
Any help would be appreciated!
See you soon,.
Bella
Create the bottom like a movieclip which anime to be the different points of view, you want it to be. Then use the reversal/deployment actionscript for your menu to trigger the movieclip in the background to animate any part is applicable for the interaction taking place.
If you don't know how to code the buttons, then trying to find online a tutorial that uses regardless of the version of actionscript used your file, for example a search using: «Flipping AS3 tutorial»
-
Newbie: Receipt happy Flash - need help with embedding - onClick
Hello
I received a web banner from one of our suppliers that I need to integrate into our website. I have it in the web page, but do not know how to configure an action of "onclick". In my reading I cannot find a setting to specify the action to take if someone clicks on the banner. Good that now it opens a new window with an error message saying that it cannot find ' / undefined. How to set the URL? The salesman who gave us the marketing content was of no help.
Thank you.
Steve
You are / were close enough in your attempt. I'll be honest and tell you that you are about to have a little less as much experience as I do with FlashVar... which means that I'll show you where to look (where I might look to get the answer for you):
http://KB.Adobe.com/selfservice/viewContent.do?externalId=tn_16417
Just be sure to include in the object and to incorporate sections of the code that they show on the page linked above.
-
OK Ive been doing a lot of tutorials, but none seem to cover my problem although some helped they gave me enough knowledge to only dig my hole deeper. I've done a Total Training CS3 essentials and a bunch of stuff from Lynda.com too.
All I'm trying to do is make tutorial videos for new employees. I want to build using a Flash interface.
All I want to do is a main screen (which I can build) and from the main screen, you select the thumbnails of each video. Each thumbnail opens a specific. FLV FLV Player, and when its done the FLV player closes and return you to the selection screen (that's the problem).
How to set the button to open the FLV file?
Can I import the file to another layer and place it on the timeline or should I do in sound in the SWF, and then refer to it from the button?
How to close when its actually play?
Any help would be appreciated.
Well here is the answer,
Player._visible = false;
Button1.onRelease = function() {}
_root. Player._visible = true;
_root. Player.Load ("8.flv");
_root. Player.Play ();
}
Button2.onRelease = function() {}
_root. Player._visible = true;
_root. Player.Load ("10.flv");
_root. Player.Play ();
}
* button3.onRelease = function() {}
_root. Player._visible = true;
_root. Player.Load ("3.flv");
_root. Player.Play ();
}*/var listenerObject:Object = new Object();
listenerObject.complete = {function(eventObject:Object):Void}
_root. Player._visible = false;
};
player.addEventListener ("complete", listenerObject);Stop();
Once again, 3Dbuzz.com came to the rescue
-
Site to site VPN - need help to set up several tunnels
I currently have tunnels VPN site-to-site of two remote sites with 1720s to connect to an ASA5510 on my site TOWN_HALL. (see attached diagram)
It works well, but I want to add connectivity between the 1720-A LAN (172.20.3.0/24) and LAN 1720 - B (172.22.3.0/24). What is the best way to do it? The years 1720 can be configured with direct VPN L2L tunnels or that will affect the existing tunnels is the ASA5510? If so, I'm guessing that each 1720 will have to go through the ASA first.
Thank you.
Configs below:
ASA5510
ASA Version 7.2 (2)
!
names of
name 172.18.3.19 Postal Mail Server description
name 172.18.3.33 description Helpdesk Server helpdesk
DNS-guard
!
interface Ethernet0/0
Description link Comcast
nameif ComCast_Out
security-level 0
IP 29.92.14.73 255.255.255.248
!
interface Ethernet0/1
nameif inside
security-level 100
address 192.168.10.2 255.255.255.252
!
interface Ethernet0/2
security-level 0
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
nameif management
security-level 100
IP 10.10.10.1 255.255.255.0
management only
!
boot system Disk0: / asa722 - k8.bin
boot system Disk0: / asa706 - k8.bin
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
list of allowed incoming access extended ip any host 29.92.14.74
list of extended all inbound icmp permitted access all inaccessible
list of inbound icmp permitted access extended throughout entire echo response
list of allowed inbound tcp extended access any host 29.92.14.73 eq 3000
list of allowed inbound tcp extended access any newspaper SMTP host 29.92.14.73 eq
list of allowed inbound tcp extended access any host 29.92.14.73 eq www
list of allowed inbound tcp extended access any host 29.92.14.73 eq 3389
list of allowed inbound tcp extended access any host 29.92.14.73 eq pptp
list of allowed inbound tcp extended access any host 116.204.226.42 eq 3000
list of allowed inbound tcp extended access any host 116.204.226.42 eq smtp
list of allowed inbound tcp extended access any host 116.204.226.42 eq www
list of allowed inbound tcp extended access any host 116.204.226.42 eq 3389
list of allowed inbound tcp extended access any host 116.204.226.42 eq pptp
list of inbound note FTP Server access
list of allowed inbound tcp extended access any host 29.92.14.73 eq ftp
acl_out list extended access permit tcp host 29.92.14.73 any eq smtp
acl_out list extended access permit tcp host 192.168.1.4 any eq smtp
tcp extended access list acl_out deny any any eq smtp
access ip allowed any one extended list acl_out
121 extended access-list permit ip 192.168.10.0 255.255.255.0 192.168.20.0 255.255.255.0
IP 172.18.3.0 allow Access-list extended sheep 255.255.255.0 172.22.3.0 255.255.255.0
IP 172.18.3.0 allow Access-list extended sheep 255.255.255.0 172.20.3.0 255.255.255.0
access-list extended sheep allowed ip 192.168.1.0 255.255.255.0 172.22.3.0 255.255.255.0
access-list sheep extended ip 172.30.1.0 allow 255.255.255.0 172.31.255.0 255.255.255.0
access-list sheep extended ip 192.168.10.0 allow 255.255.255.252 172.31.255.0 255.255.255.0
IP 172.17.1.0 allow Access-list extended sheep 255.255.255.0 172.31.255.0 255.255.255.0
172.18.0.0 IP Access-list extended sheep 255.255.0.0 allow 172.31.255.0 255.255.255.0
IP 172.31.3.0 allow Access-list extended sheep 255.255.255.0 172.31.255.0 255.255.255.0
access-list sheep extended ip 192.168.0.0 allow 255.255.0.0 172.31.255.0 255.255.255.0
backup_access_out of access allowed any ip an extended list
outside_access_out of access allowed any ip an extended list
Note to access list outside_access_out Barracuda
outside_access_out list extended access permit tcp host 172.18.3.8 any eq smtp inactive
Comment from outside_access_out-access SMTP Block list
outside_access_out tcp extended access list deny any any eq smtp inactive
Note to access list schools SMTP inside_access_in
inside_access_in list extended access permit tcp host postal eq smtp no matter what eq smtp
inside_access_in list extended access permit tcp host 172.18.3.8 any eq smtp
inside_access_in list extended access permit tcp host 172.18.3.30 any eq smtp
inside_access_in tcp extended access list deny any any eq smtp
inside_access_in of access allowed any ip an extended list
Access extensive list ip 172.18.3.0 ComCast_Out_20_cryptomap allow 255.255.255.0 172.22.3.0 255.255.255.0
ComCast_Out_20_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 172.22.3.0 255.255.255.0
Access extensive list ip 172.18.3.0 ComCast_Out_25_cryptomap allow 255.255.255.0 172.20.3.0 255.255.255.0
vpn_access list standard access allowed 192.168.10.0 255.255.255.252
standard access list vpn_access allow 172.17.1.0 255.255.255.0
standard access list vpn_access allow 172.18.0.0 255.255.0.0
standard access list vpn_access allow 172.31.3.0 255.255.255.0
vpn_access list standard access allowed 172.30.1.0 255.255.255.0
vpn_access list standard access allowed 192.168.0.0 255.255.0.0
pager lines 24
Enable logging
emergency logging monitor
logging warnings put in buffered memory
asdm of logging of information
MTU 1500 ComCast_Out
Within 1500 MTU
MTU 1500 NOT_IN_USE
management of MTU 1500
IP local pool vpnpool 192.168.20.2 - 192.168.20.254
172.31.255.1 mask - local 172.31.255.250 pool POOL VPN IP 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 522.bin
don't allow no asdm history
ARP timeout 14400
NAT-control
Global interface (ComCast_Out) 1
Global (NOT_IN_USE) 1 interface
NAT (inside) 0 access-list sheep
NAT (inside) 1 192.0.0.0 255.0.0.0
NAT (inside) 1 0.0.0.0 0.0.0.0
TCP static (inside ComCast_Out) interface 3000 172.18.3.22 3000 netmask 255.255.255.255
TCP static (inside ComCast_Out) interface smtp 172.18.3.8 smtp netmask 255.255.255.255
TCP static (inside ComCast_Out) interface www 172.18.3.30 www netmask 255.255.255.255
TCP static (inside ComCast_Out) interface 3389 172.18.3.22 3389 netmask 255.255.255.255
TCP static (inside ComCast_Out) interface 172.18.3.22 pptp pptp netmask 255.255.255.255
TCP static (inside NOT_IN_USE) interface 3000 172.18.3.22 3000 netmask 255.255.255.255
TCP static (inside NOT_IN_USE) interface smtp 172.18.3.8 smtp netmask 255.255.255.255
TCP static (inside NOT_IN_USE) interface www 172.18.3.30 www netmask 255.255.255.255
TCP static (inside NOT_IN_USE) interface 3389 172.18.3.23 3389 netmask 255.255.255.255
TCP static (inside NOT_IN_USE) interface 172.18.3.22 pptp pptp netmask 255.255.255.255
TCP static (inside ComCast_Out) interface 3101 172.18.3.8 3101 netmask 255.255.255.255
TCP static (inside ComCast_Out) ftp ftp netmask 255.255.255.255 helpdesk interface
static TCP (inside ComCast_Out) interface ftp - data helpdesk ftp - data netmask 255.255.255.255
static (inside, ComCast_Out) 29.92.14.74 172.18.3.16 netmask 255.255.255.255
Access-group entering interface ComCast_Out
Access-group interface ComCast_Out outside_access_out
inside_access_in access to the interface inside group
Access-group entering interface NOT_IN_USE
Access-group interface NOT_IN_USE backup_access_out
Route 0.0.0.0 ComCast_Out 0.0.0.0 29.92.14.78 1 track 1
Route inside 192.168.0.0 255.255.0.0 192.168.10.1 1
Route inside 172.17.1.0 255.255.255.0 192.168.10.1 1
Route inside 172.18.0.0 255.255.0.0 192.168.10.1 1
Route inside 172.31.3.0 255.255.255.0 192.168.10.1 1
Route inside 172.30.1.0 255.255.255.0 192.168.10.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
internal group vpnclient strategy
vpnclient group policy attributes
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpn_access
internal remote group strategy
Group remote attributes policy
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value 121
Enable http server
http 172.0.0.0 255.0.0.0 inside
http 192.0.0.0 255.0.0.0 inside
http 10.10.10.0 255.255.255.0 management
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
monitor SLA 123
interface type echo protocol ipIcmpEcho 168.87.71.226 ComCast_Out
NUM-package of 3
frequency 10
Annex ALS life monitor 123 to always start-time now
Crypto ipsec transform-set esp-3des esp-md5-hmac 3des
Crypto ipsec transform-set esp - esp-sha-hmac SHA3DES
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
3DES encryption dynamic-map dynmap 10 transform-set
Crypto-map dynamic outside_dyn_map 10 the value transform-set ESP-3DES-SHA
address for correspondence card crypto vpnremote 20 ComCast_Out_20_cryptomap
peer set card crypto vpnremote 20 202.13.116.209
vpnremote card crypto 20 the transform-set ESP-DES-MD5 value
address for correspondence card crypto vpnremote 25 ComCast_Out_25_cryptomap
peer set card crypto vpnremote 25 207.147.31.97
card crypto vpnremote 25 game of transformation-ESP-DES-MD5
vpnremote 30 card crypto ipsec-isakmp dynamic dynmap
map vpnremote 65535-isakmp ipsec crypto dynamic outside_dyn_map
vpnremote ComCast_Out crypto map interface
card crypto VN1530600A 663 matches the address ACL663
card crypto VN1530600A 663 set pfs
card crypto VN1530600A 663 set peer 29.92.14.73
crypto VN1530600A 663 the transform-set SHA3DES value card
card crypto VN1530600A 663 defined security-association life seconds 1800
crypto isakmp identity address
ISAKMP crypto enable ComCast_Out
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 20
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
the Encryption
md5 hash
Group 2
life 86400
Crypto isakmp nat-traversal 20
!
track 1 rtr 123 accessibility
tunnel-group type remote ipsec-ra
tunnel-group remote General attributes
address vpnpool pool
Group Policy - by default-remote control
tunnel-group remote ipsec-attributes
pre-shared-key *.
tunnel-group 29.92.14.73 type ipsec-l2l
IPSec-attributes tunnel-group 29.92.14.73
pre-shared-key *.
tunnel-group 202.13.116.209 type ipsec-l2l
IPSec-attributes tunnel-group 202.13.116.209
pre-shared-key *.
tunnel-group 207.147.31.97 type ipsec-l2l
IPSec-attributes tunnel-group 207.147.31.97
pre-shared-key *.
Telnet 192.168.0.0 255.255.0.0 inside
Telnet 172.0.0.0 255.0.0.0 inside
Telnet timeout 120
SSH timeout 5
Console timeout 0
management-access inside
management of 10.10.10.11 - dhcpd addresses 10.10.10.20
!
!
class-map inspection_default
match default-inspection-traffic
!
!
Policy-map global_policy
class inspection_default
inspect the pptp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:82155434d3cfa69cd7217f20aaacabb7
: end
1720-A
version 12.2
horodateurs service debug datetime
Services log timestamps datetime
encryption password service
!
1720-A host name
!
logging buffered debugging 4096
!
iomem 20 memory size
clock timezone IS - 5
clock to summer time EDT recurring 2 Sun Mar 2:00 1 Sun Nov 02:00
IP subnet zero
!
!
no ip domain-lookup
name of the IP-server 172.18.3.24
DHCP excluded-address IP 172.20.3.1 172.20.3.20
!
IP dhcp pool dhcppool
network 172.20.3.0 255.255.255.0
router by default - 172.20.3.1
DNS-server 172.18.3.24 172.18.3.26
!
audit of IP notify Journal
Max-events of po verification IP 100
property intellectual ssh timeout of 120
property intellectual ssh authentication-3 retries
!
crypto ISAKMP policy 10
md5 hash
preshared authentication
Group 2
address of Cisco key crypto isakmp 29.92.14.73
!
!
Crypto ipsec transform-set esp - esp-md5-hmac TOWN_HALL
Crypto ipsec transform-set esp - esp-md5-hmac DES-MD5
Dimensions of tunnel mib crypto ipsec flowmib history 200
MIB crypto ipsec flowmib size of 200 historical failure
!
map VPNmap 10 ipsec-isakmp crypto
defined by peer 29.92.14.73
game of transformation-TOWN_HALL
match address TOWN_HALL
!
!
!
!
interface Ethernet0
IP 207.147.31.97 255.255.255.252
IP-group access to the PERIMETER of
NAT outside IP
Half duplex
card crypto VPNmap
!
interface FastEthernet0
LAN description
IP 172.20.3.1 255.255.255.0
IP nat inside
automatic speed
!
interface Serial0
no ip address
Shutdown
!
IP nat inside source list NAT_ADDRESSES interface Ethernet0 overload
IP classless
IP route 0.0.0.0 0.0.0.0 207.147.31.98
no ip address of the http server
enable IP pim Bennett
!
!
NAT_ADDRESSES extended IP access list
deny ip 172.20.3.0 0.0.0.255 172.18.3.0 0.0.0.255
IP 172.20.3.0 allow 0.0.0.255 any
PERIMETER extended IP access list
permit udp host 29.92.14.73 host 207.147.31.97 eq isakmp
esp permits 29.92.14.73 host 207.147.31.97
IP 172.18.3.0 allow 0.0.0.255 172.20.3.0 0.0.0.255
allow all all unreachable icmp
permit any any icmp echo response
allow any host 207.147.31.97 eq telnet tcp
allow any host 192.168.20.1 eq telnet tcp
permit tcp any eq www everything
permit tcp any eq 443 all
permit udp host 173.13.116.209 host 207.147.31.97 eq isakmp
esp permits 173.13.116.209 host 207.147.31.97
IP 172.22.3.0 allow 0.0.0.255 172.20.3.0 0.0.0.255
refuse an entire ip
TOWN_HALL extended IP access list
IP 172.20.3.0 allow 0.0.0.255 172.18.3.0 0.0.0.255
!
alias exec sr show run
alias exec s sh ip int br
alias exec srt show ip route
!
Line con 0
exec-timeout 0 0
Synchronous recording
line to 0
line vty 0 4
exec-timeout 60 0
Synchronous recording
local connection
transport telnet entry
!
No Scheduler allocate
NTP-period clock 17180009
end
1720-Bversion 12.1no single-slot-reload-enable servicehorodateurs service debug datetimeServices log timestamps datetimeencryption password service!1720-B host name!logging buffered debugging 4096no set record in buffered memoryConsole rate-limit logging 10 except errors!iomem 25 memory sizeclock AND time zone - 5clock to summer time EDT recurring 2 Sun Mar 2:00 1 Sun Nov 02:00IP subnet zerono ip fingerno ip domain-lookupname of the IP-server 172.18.3.24DHCP excluded-address IP 172.22.3.1 172.22.3.20!IP dhcp pool dhcppoolnetwork 172.22.3.0 255.255.255.0router by default - 172.22.3.1DNS-server 172.18.3.24 172.18.3.26!audit of IP notify JournalMax-events of po verification IP 100!!crypto ISAKMP policy 10md5 hashpreshared authenticationGroup 2address of Cisco key crypto isakmp 29.92.14.73!!Crypto ipsec transform-set esp - esp-md5-hmac TOWN_HALL!map VPNmap 10 ipsec-isakmp cryptodefined by peer 29.92.14.73game of transformation-TOWN_HALLmatch address TOWN_HALL!!!!interface Ethernet0IP 202.13.116.209 255.255.255.252IP-group access to the PERIMETER ofNAT outside IPHalf duplexcard crypto VPNmap!interface FastEthernet0LAN descriptionIP 172.22.3.1 255.255.255.0IP nat insideautomatic speed!IP nat inside source list NAT_ADDRESSES interface Ethernet0 overloadsource-interface IP kerberos anyIP classlessIP route 0.0.0.0 0.0.0.0 202.13.116.210no ip address of the http server!!NAT_ADDRESSES extended IP access listdeny ip 172.22.3.0 0.0.0.255 172.18.3.0 0.0.0.255deny ip 172.22.3.0 0.0.0.255 192.168.1.0 0.0.0.255IP 172.22.3.0 allow 0.0.0.255 anyPERIMETER extended IP access listpermit udp host 29.92.14.73 host 202.13.116.209 eq isakmpesp permits 29.92.14.73 host 202.13.116.209IP 172.18.3.0 allow 0.0.0.255 172.22.3.0 0.0.0.255allow all all unreachable icmppermit any any icmp echo responsepermit tcp any eq www everythingpermit tcp any eq 443 allip permit 192.168.1.0 0.0.0.255 172.22.3.0 0.0.0.255refuse an entire ipTOWN_HALL extended IP access listIP 172.22.3.0 allow 0.0.0.255 172.18.3.0 0.0.0.255IP 172.22.3.0 allow 0.0.0.255 192.168.1.0 0.0.0.255alias exec sr show runalias exec s sh ip int bralias exec srt show ip routealias exec sri see the race | I havealias exec srb see the race | b!Line con 0Synchronous recordingtransport of entry noline to 0line vty 0 4exec-timeout 0 0Synchronous recordinglocal connectionNo Scheduler allocateNTP-period clock 17180266endMake sure you have the following sets of transformations in used through the tunnel:
Crypto ipsec transform-set esp - esp-md5-hmac TOWN_HALLThe tunnel seems to be failing on the negotiations of the phase 2 due to incompatibility, but depending on the configuration
It seems very well.Are you sure that these debugs are not only a part of the negotiations and finally the established tunnel?
Check the condition of the tunnel with the commands:
HS cry isa his
HS cry ips its
In trying to establish the tunnel again and we will see the results.Federico.
-
Quiz Flash need help with actionscript
Hallo,I made a quiz in flash with four Pages:
1. "welcome to quiz," etc. with a button to GO to THE QUIZ.
2. the real test with two possible answers
3. the correct answer
4. wrong answer with link to start again.I've added the following script to jump between the pages:
{We (Release)}
gotoAndPlay (pagenumber)
}It works perfectly. But...
I would like to add several quiz that I figure out on my own, but I want to add a kind of counter, which, at the end of the quiz, will give a percentage or a count for example. 7/10 - 70% congratulations! or something like that.
Anyone have an idea how I wanted to write this script?
I am a total newbie Flash is told by the way!
Thank you very much!
Create an action layer that extends through all your pages and set an outcome variable...
var score = 0;
Maybe for each correct answer you increment the value 1...
score += 1;
When you arrive at the end or somewhere else, you have a textfield and you use the value of note in there somehow...
tField.text = "you answered" + score + "out 10 correctly»;»"
-
DataGrid editable programmaticaly built XmlListCollection need help
Hi, I am trying to build an editable datagrid with 20 empty lines in it. Users will fill the cells, then gets stored in a database, and then later by making selections in a combobox control, they can bring back these data for viewing and modification. I tried to create the XML dynamically, and then on the XmlListCollection addItem does not. Can someone please indicate where I'm wrong? Thank you!
[Bindable] private var teamGridDataAsXml:XML;
[Bindable] private var teamGridData:XMLListCollection;
private function initEmptyTeamGrid (): void {}
teamGridData = new XMLListCollection();
var s:String = '< lines > ';
for (var i: int = 0; i < 20; i ++) {}
s += ' < row rowIndex =------"" "+ i +" \ "agentId =" firstName = "lastName =" country = "/ >";
}
s += ' < / ranks > ';
teamGridDataAsXml = new XML (s);
teamGridData.addItem (teamGridDataAsXml);
}
< mx:DataGrid id = "agentInfo" editable = "true" dataProvider = "{teamGridData}" width = "100%" height = "100%" number of rows = "20" >
< mx:columns >
"< mx:DataGridColumn headerText =" # "dataField="@rowIndex "editable ="false"/ >
"< mx:DataGridColumn headerText ="Agent ID"dataField="@agentId "editable ="true"/ >
"< mx:DataGridColumn headerText ="First name"dataField="@firstName "editable ="true"/ >
"< mx:DataGridColumn headerText ="Last Name"dataField="@lastName "editable ="true"/ >
"< mx:DataGridColumn headerText ="Country"dataField="@country "editable ="true"/ >
< / mx:columns >
< / mx:DataGrid >
teamGridDataAsXml = new XML (s);
trace (teamGridDataAsXml.ToXmlString ()); to be sure, you have good xml
var xlRows:XMLList = teamGridDataAsXml.row;
trace (xlRows.length ()); What do you expect?
teamGridData = new XMLListCOllection (xlRows);You can pass the variable xml and go straignt to the XMLListCollection also. In the loop, build the XML node, using the literal XML syntax and then call addItem * inside the loop *.
Tracy -
Need help from Flash? Animated border will be trust worthy?
Hello Experts,
I am new to animation and flash world. Recently, I'm rebuilt a HTML5 with JAVASCRIPT of FLASH project that was written in verse 2004 in ActionScript 1.0
www.maisondequartier.com - learn french online
The site basically an interactive learning through simple animations.
Professional CC since Adobe Flash uses ActionScript 2.0 or higher to convert SWFs in HTML5, so I can't convert the project using Adobe Flash Professional CC. So, I look for alternatives and decide to do so since the beginning of everything. Through research on the different ways to start my project, I have decided to use Edge animate CC to interactivity.
Once, I spent a month learning different ins and out of this program. Now I hear that they stop for all developing this software. His disagreeable to know that you have spent time learning software.
I would like to know your valuable suggestion for me on how to go further? (with software problems). It would be great if you could recommend me any other alternative solution (software) to solve my problem. I think that it is not supposed go further with lively CC edge and they change as the CC Professional Flash Adobe animate CC beginning in early 2016.
Need solutions to choose from.
If you have started a project in Edge finish on the edge. It won't suddenly stop working.
Adobe Animate is just Flash CC with canvas Export, export video SWF AND. The name was changed update will be very different. It is not a combination of edge Frankenstein and Flash.
If you have experience with Flash you can start to learn how canvas export is similar to what you already know. There are snippets of code JS Web useful for interactivity.
Edited to add if you have a FLA AS1, you should try to convert. You will need to only stop() by this.stop () and use code snippets to add your interactivity back in.
Flash professional help | Summary of new features
The type of universal document converter allows conversion of your FLA projects (of any type) to another type of document, such as HTML5 Canvas and WebGL.
To use this feature, click orders > convert to other Formats of Document and select the target document type and then specify the path of the converted file.
-
I need help to install adobe flash for my G5 mac
I need help to install adobe flash for my MAC OS X 10.4.11, I visited site and its telling me to upgrade my adobe flash, I really need help.
Flash Player should be installed ONLY from the Adobe Web site.
Here you can check which version of Flash player you have actually installed: http://kb2.adobe.com/cps/155/tn_15507.html
You can check here: http://www.adobe.com/products/flash/about/ to see what version you need to install to your Mac and OS. You must first uninstall any old version of Flash Player using uninstaller from here (make sure you use the right pair!):
http://kb2.Adobe.com/CPS/909/cpsid_90906.html
and also that you follow the instructions carefully, as all applications (including Safari) closed first before installing. It is strongly recommended that you perform a permissions repair after installing anything from Adobe.
After installation, restart your Mac and restart Safari, then in Safari/security preferences enable "enable Plugins".
Maybe you are looking for
-
I have a problem really twisted with my Ipad mini
So he started 3 days ago. I went into the shower with my Ipad on the receiver to play music on Youtube, and sometimes I would "Skip Ad" with my wet finger. I do it on the times and nothing bad really happens. So after that I did, it was always very w
-
Satellite 1800-s207 screen becomes extremely dark
My screen to 1800-s207 Satellite becomes extremely dark.
-
I was informed by "Motorola Chat Agent" that Adobe has stopped the Flash Player for Android version 4.0 ICS. Can anyone tell if there is no alternative or workaround for Flash Player? Thank you Michael UK
-
What values are returned, or how can I detect when you leave a promptpopup instead of enter the information? Thank you!
-
I ran "fixitcenter.slupport.microsoft.com" and this is what they were saying was wrong. " They automatically correct some defects, but has not fixed this problem - just tell me what was wrong and said it "must" be repaired.