Need help from Flash? Animated border will be trust worthy?

Similar Questions

• Need help inserting flash animation in the article...

  I inserted the video into flash movie. I loaded the .swf and .fla files on a server and is gone in the properties of the flash movie and pointing to the server to retrieve the .fla file & file .swf controls.  I can listen to clips from the movie in flash without problem.

  I am wanting to use the object code that has been created within the .html file that was generated by the flash and insert this into an article to display the video.  I traced the .swf file in the code object to point to where it resides on the server, but the video will not play using the code object only. Is there a way to do it using only one object or code without the need for integration scripts?

  (I'm using version CS4)

  If the swf file does not reside in the same folder as the html page that loads, so if the video is dynamically loaded into the Flash file, chances are the targeting in the swf file needs to be adjusted.  If swf files target just the video of his single file name, try to put the video file in the same folder as the html file and see if it is responsible.

• I started my system, unfortunately I forgot to backup all bookmarks on firefox, how could I get these bookmarks in firefox need help from your server

  Hi, friends
  I started my system, unfortunately I forgot to backup all bookmarks on Firefox, now how do I get these bookmarks in Firefox need help from your server

  Start or restart to activate something, or restart.

  Did you format your hard drive or re-install Windows?

  If you did a reinstall of Windows, look for a folder.
  It can be called old windows. Check the instructions that you were given.

• I need help to Flash the bios. I have an Aspire 5810TZ. I start and it just says: "acer".

  I need help to Flash the bios. I have an Aspire 5810TZ. I start and he just says "acer" and goes no further. I went to the download page for BIOS on us.acer.com and it has a zip file with 5 files:
  JM4151135.exe
  IN FLORIDA...
  GPC_V135.bin
  Readme.txt
  FLASH. BAT
  What should I do? I tried to copy the files on a USB key and turn on/off with Fn + ESC key. After the release the power button and pressed Fn - Esc another screen appears after 30 seconds. I gave up and gave her 30 minutes but it does nothing. I read another person that should be flashing power button online. I have to rename one of the files. Help, please!

  Aspire 5810TZ menu of frozen startup.

  I finally understand it.

  I couldn't start a back b/c drive, it me did not start anything.

  I followed this chain of logic:

  -Downloaded the bios (2.35 is the one that worked for me)
  -Find the exe file in the winflash file.
  -Extract the files in archive exe using the 7-Zip program
  -Find the .fd file and rename it to JM41X64. FD (I read in a forum was unique in my laptop)
  -Copied JM41X64. FD and FLASH it is. EXE on a USB
  -A the battery and the hard drive out.
  -With its trendy diet I supported Fn + Esc and that you press the power button once while ensuring that the Fn + Esc has been always held down.
  -J' waited 6 seconds and release the Fn + Esc and seen the flashing flash player
  -After about 10 minutes, restarted the machine and the bios as like new.

  Later, I found that there was a hard drive problem.

  I want you guys should help more. All I needed was the name of the JM41X64 file. FD and you don't know how many hours I put into trying to find how simpy bios flash. It is not that difficult for someone with a b.s. in computer science to learn how. Couldn't we a m.s. back b/c the bios drive was messed up. F12 didn't work.

• Need help with Flash - really basic!

  Hi, I really need help with Flash and quick. I have to create an auto-run cd, but before I can create that, I have to make everything works! I took a class in College Flash, which up to 1 1/2 ago so im kind of knowledge missing!
  
  My first problem is as follows:
  I have the homepage, and it contains a button English and french.
  When you click on buttons, it brings you to the next page, either resourcesFr or resourcesEn.
  I tried to use the loadMovie script but and it works but the new page loads on the home page you can still see the English/french under buttons. How can I fix? I know its simple but I am short on time... Should I still use the loadMovie script?
  
  My other problem is that im trying to have another button to link to a folder. Use the script for getURL for this as well?
  
  Help!

  I was able to solve my problem... it was only the forward slash that were in the wrong way... so the correct code is:

  on (release) {}
  DRV = _url.substr (8.1);
  getURL (drv + ": / English/brochures");
  }

  Only took me 5 days... I think I need to buy a script book action! Laughing out loud

• Need help with flash player using w/Win7

  OK, here we go. I have - Windows 7 Home Premium 6.1.7601 running service pack 1

  Type of system: x 64-based pc

  Windows Internet Explorer 9 (update version RC) 256-bit

  I use to be able to watch videos on youtube ect. But now flash player does not work. What is the problem? I have Adobe flash player 10 activex and installed shockwave player 11.5 and still it asks me to update my flash player. Need help.

  Hi, thanks. This "Perfect Optimizer" which was found and removed, McAfee did remove or MBAM?

  Is the trial version of MBAM, the free version which is a stand alone, which is run from your desktop or a version installed?

  You see the animation of the Flash Player logo and what version of Flash Player is available on the following site?

  http://www.Adobe.com/software/Flash/about/

  Then check on this Shockwave Flash object in your addons that I mentioned before.

  I want to ensure that a certain number of things and then have another procedure for you and explain once I get an answer from you on the above.

  Thank you

  eidnolb

• NEED HELP WITH FLASH GAME!

  Hi all

  I am brand new to the forums here and I need help!  I'm on a very tight schedule for a flash game project, and can't seem to understand my problem.

  In my game of people shoot 4 different moving images and get points. Simple right? Although images is a question mark that can shoot people and when they do, I need flash to stop the timer game, a new popup window, the multiple choice question appear in the window and wait for the user to respond.

  NOTE: I would also like to be able to customize the size and location of the pop-up window!  Also, the question must be random.  I have a list of questions in a word doc.

  Then, if the answer to the question properly close window award 10 points and continue the game.  If you incorrectly answer the question, saying bad and then display the results of end game.

  Right now I have it to where it opens a pop up in a web browser and askes the question there.  The question is chosen at random from a file called random.html.  But I don't want the game to work this way. I want the game to open the pop in flash.  Can anyone help?  Time is a few hours, SORRY for THE SHORT NOTICE!

  Kapelski

  Everything to do with the movieclip is possible.  You can make sure the questions are changed dynamically whenever he appears... but it is a matter of design to be.  This has nothing to do with the popups... This is a clip that you can control the visibility of and what it contains.  In the Flash file will probably be easier to manage than a popup window outside, as far as the aspect programming and scoring goes.

  Create a movieclip that has a textfield for the question, and all what he needs in the way of user interaction.  Unfortunately, I didn't take the time to give a detailed approach to design.  If you manage to create a shooting game, creating a movieclip which works as you describe should be a fairly simple task for you.

• Infected Winlogon.exe and explorer.exe accidentally deleted on XP Pro PC - need help from recovery console

  Hello

  Windows XP Pro SP3 Dell Optiplex and been infected by Trojan in winlogon exe files and Explorer. AVG asked me if I wanted to force deletion and I foolishly agreed. Now, I get the BSOD and the message 'Windows logon done unexpectedly '.   It is a work PC and the CD only we have is the Dell CD to re - install and I know that I need as the first step recovery console. I don't know if the recovery console is on it, and then I need help for the uncomprressed explorer.ex_ and winlogon.ex_ and in their right place.

  I'm not a total newbie, but it's been some time that I used the recovery console.

  Help?  Thanks in advance and greetings to all

  Morey

  Try to be more specific with the error messages you see, so it does not guess or try things.

  Here is an example of a popular error message that sounds like yours (maybe):

  STOP: c000021a {fatal system error}
  The Windows logon process ended unexpectedly with the status of 0xc0000034 (0 x 0000000 0000000 x 0).
  The system has been shut down.

  What exactly tell your message?

  There should be copies of XP system files backup all critical already on your hard drive in the windows\system32\dllcache folder (it is this case), you may not need any expansion.

  I would like to see the exact error message, make a CD bootable Recovery Console, run chkdsk/r even if he doesn't find anything to do and then see the replacement of missing persons or suspicious files, either by copying it in the backup copies of replacement of the recovery, or from another CD Console, you can do if the Recovery Console gives you a hard time (first do the CD Recovery Console).

  First of all, you need to start on something...

  You can do a restore bootable XP CD as follows:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• HP Pavilion - 15 t-ab100 CTO: need help from Windows 7 drivers

  I was faced with a clean install of windows 7 on my laptop for 2 days now. I'm going to sleep after I post this so feel free to help others who are online, but if no one else needs help I have little material ID's which need pilots. I would be very grateful, because it is the last step, I need to finish my installation.
  
  Ethernet controller:
  
  PCI\VEN_10EC & DEV_8136 & SUBSYS_80A4103C & REV_0A
  PCI\VEN_10EC & DEV_8136 & SUBSYS_80A4103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200
  
  ICP data and acquisition and signal processing controller
  
  PCI\VEN_8086 & DEV_9D31 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D31 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D31 & CC_118000
  PCI\VEN_8086 & DEV_9D31 & CC_1180
  
  ICP data and acquisition and signal processing controller
  
  PCI\VEN_8086 & DEV_1903 & SUBSYS_80A4103C & REV_08
  PCI\VEN_8086 & DEV_1903 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_1903 & CC_118000
  PCI\VEN_8086 & DEV_1903 & CC_1180
  
  PCI device
  
  PCI\VEN_10EC & DEV_522A & SUBSYS_80A4103C & REV_01
  PCI\VEN_10EC & DEV_522A & SUBSYS_80A4103C
  PCI\VEN_10EC & DEV_522A & CC_FF0000
  PCI\VEN_10EC & DEV_522A & CC_FF00
  
  PCI memory controller
  
  PCI\VEN_8086 & DEV_9D21 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D21 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D21 & CC_058000
  PCI\VEN_8086 & DEV_9D21 & CC_0580
  
  PCI simple communication controller
  
  PCI\VEN_8086 & DEV_9D3A & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D3A & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D3A & CC_078000
  PCI\VEN_8086 & DEV_9D3A & CC_0780
  
  SM bus controller
  
  PCI\VEN_8086 & DEV_9D23 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D23 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D23 & CC_0C0500
  PCI\VEN_8086 & DEV_9D23 & CC_0C05
  
  It is the last of the drivers I need. It was certainly a pain get here without any connectivity USB wireless drivers as well as figuring out how to attach the USB 3.0 drivers to my installer of windows 7, but it's in the past now. Thank you much in advance.

  Hello:

  You can use the W7 x 64 drivers and the software of this model to yours except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-ab000-notebook-PC-series/7771366/model/8542715

  The drivers you need for the ID you posted in the order that you posted the...

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp71191.exe

  ICP data and acquisition and signal processing controller x 2:

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

  File name: sp71185.exe

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp71189.exe

  PCI memory controller?  Don't know. Can be installed from below driver chipset.

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  File name: sp71183.exe

  SM bus controller: Note: install first this driver and restart.

  This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

  File name: sp73543.exe

• Need help from Windows Vista Home Prenium COmpaq CQ6-420 us

  I need help my laptop has only 1 year and the hard drive that came with it is a failure and the warranty is over, I need help

  Buy a new hard drive and reinstall Vista.

  How to get the recovery media Vista to make it back to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s since the Partition of recoveryin case of hard drive failure or System Crash.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  See you soon.

  Mick Murphy - Microsoft partner

• need help with flash player

  I have upgraded to windows 10 and you do not have adobe flash on my computer. I tried to download it, but I get a message that says that adobe flash player is built into windows 10 and does not need to be downloaded. How can I fix it?

  @ !

  Hi Donna,.

  Please see the link below, it should help:

  Flash Player issues. Windows 10 | Microsoft edge

  Let us know if that helps.

  Kind regards

  Bani

• Desperately need help from chat session - site keeps browsing me page "need help, we need more information.

  I want to deactivate CS3 via chat, because it has been installed on a PC that has crashed and cannot be turned off as usual.  When I try to get from adobe to give me a "Start chat" button, it doesn't make me go through the product screens you have - what you're doing with it.  I tried eight different ways to get a chat session going, and no matter where I start, it keeps me taking back on it tell us what you have and what you want with this page.  If someone has a link "start chat", I would be grateful to have.  Thank you

  You're not likely to find staff chat service, until the long weekend passes.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• Need help with Flash intro

  Hello
  
  I did a little intro in Flash for a site that I built in Golive. I have no knowledge of Flash what it is, and I need help to ensure that, as soon as the intro ends the visitor is redirected to the home page. I did the intro in Imageready (so all the executives eventually bitmaps in Flash), but I read somewhere that I should use some scripts on the last image. I opened the file in Flash, but I'm not sure of what the script to use and how. Could someone help me here (it is not a commercial site, it's just my own site but any help would be less appreciated!)? And then I also have to add scripts in the html page.
  
  My site is here: http://www.fdesign.eu/sicilia2007/index.html

  on the last picture set...

  This.Stop ();
  getURL ("home.html");

• Need help from a staff Adobe on account membership

  Two memberships (complete creative cloud) went within one account. I need help of a staff of Adobe to transfer one of them to another account.

  Thank you.

  Robert Abrigo

  Post edited by: a TechOneGlobal

  Use the Chat support - for the still need help, click the link below? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Need help with Flash banners with the Player Version 10.1 for Google adwords

  Hello world

  I've created a banner animated in Flash Pro CC and its going to be used for Google Adwords. But they need banners to be with version 10.1 only according to the features of Google.

  Is there anyway keep version 10.1. Will be the banner animations remain intact?

  Please help me because I'm stuck in the present and campaign to live here tomorrow.

  Thanks and greetings

  Vikas Sharma
  

  
  

  
  

  Download flash cs6 and use to post your ad or expand flash se publishing capabilites.  If you have a cc flash subscription, you can download and use flash cs6 time connected in your cc account.

  Here's how to develop capabilities flash cc edition: http://forums.adobe.com/message/5511080#5511080#5511080