I'm new construction sites and need help with boxes of zoom

Similar Questions

• New to Adobe Flash, need help with a simple coding

  I'm new using Adobe Flash and need help. That means class static type?

  static text is entered in the authoring environment.  This is the text that will not change (that's why static) during execution.

  This is in contrast to the dynamic text, which is text that is assigned using actionscript and can change at any time actionscript runs.

• Making the ear of corn and need help with the ball.

  I do some corn on the COB for an illustration and I need help with the texture of the ball. I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all. I tried to recreate it in a rectangle by using the option in the menu object (1 row, 50 columns) gradient mesh and I'm trying with the fusion in object mode, but not lucky yet. Can someone help to put me on the right track to make the texture:

  

  

  

  I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all.

  Tank,

  You have published three images stylistically very different. The first is photographic and call probably (but not necessarily) for graduates of mesh. The other two are graphical treatments (and frankly, they're both rather flat; lack of depth).

  Illustration style extends the range of cartoonish in sketchy photo-realism and all the rest. The problem is you didn't show your own attempt so that anyone can have an idea of what you're trying to achieve the stylistic point of view.

  I just need to put in place so that the final step does not appear the whole box. The problem now is trying to make the style of the good brush to reproduce the effect...

  You seem to think you have to build a kind of linear construction and then find a way to reshape the shape of each part of the leaf. Yes, you pouvez approach it this way, but Illustrator users has often tend to be what aunt Molly would call "too clever by half."

  Not everything must be something semi intelligent auto or complex and tedious consruct involving brushes, envelopes, masks, etc, etc. Much can be accomplished by thinking that he just thanks to measure you draw directly economic paths and constructions, which take no more time (often less) and result in very tidy, simple files. Again, a lot depends on what you are trying to achieve the stylistic point of view. But here's an example that only took a few minutes to draw:

  

  

  

  

  

  If the above consists of:

  Three roads closed, 8 points each, with ordinary linear degrees

  Three mixtures of open path with three anchor points for each key path

  Six paths closed for shadows / highlights, with 19 points in total

  Mixtures being directly from the paths drawn comic forms, the spacing of the veins 'automatically' and intuitively follows the width from point of view of the worksheet.

  Rather than to build a boilerplate brush, colouring and the weight of each of the three main paths of the vein mixtures can be set individually at any time, simply directly by selecting the key path.

  JET

• I'm new to VMware and need help.

  I'm new to VMWare and barely installed ESXi 6.0 created a host but now I can not install Windows 2012 r2. Cannot access the ISO. Do I need the plugin integration customer or what. I called tech support and they would not help because I am on trial. Any help would be great. Thank you

  You select the ISO in the settings of the virtual machine and select 'connect at Power On "? Alternatively, you can connect the ISO in the current state (power on) and then press CTRL-ALT-INS to 'hot' start the virtual machine.

  André

  PS: If it still does not work, check that you have a bootable ISO image, for example not only a picture of Service Pack.

• I am new to dreamweaver and need help

  I have faced a problem that I could not understand and do not know how to solve it. I deleted some old catalog and insert the new but when I saw in the browser, it came out a lot of code.

  "" < % if request.cookies ("signin") = "" and request.querystring ("fn") <>"" then response.redirect "catalog2.asp? fn =" & request.querystring ("fn") elseif request.cookies ("signin") <>"" and request.querystring ("fn") <>"" then "== with valid password, the brouchure are allow to download or view myLiveFilePath Dim myLiveFilePath ="C:\Inetpub\wwwroot\sites\namleong.com.sg\brochures\"myTestFilePath Dim myTestFilePath ="D:\WP\WP. " Project\Paprika.brands.CMS\Solution\Liz.Freelane\namleong\brochures' Dim myFile myFile = myLiveFilePath + "\" + request. QueryString ("fn") '-declare variables Dim objFSO Dim objFile Dim objStream Dim strFileExtension '-set absolute location to the file '-create FSO object to check if the file exists and get the properties Set objFSO = Server.CreateObject ("Scripting.FileSystemObject") '-checks if the file exists if objFSO.FileExists (myFile) then 'Dim myPasswordForm 'SET myPasswordForm = document.forms.passwordCheck' SET THE PASSWORD EMPTY' myPasswordForm.password.value = ' ' ' Session("PasswordInvalid") = 0 Set objFile = objFSO.GetFile (myFile) '-first clear response , and then set the appropriate headers Response.Clear '-the name of the file that you give will be the one that is shown ' users by default when they save Response.AddHeader "Content-Disposition", "attachment; filename ="& objFile.Name Response.AddHeader"Content-Length", objFile.Size Response.ContentType = ' application/octet-stream' Set objStream = Server.CreateObject ("ADODB. ObjStream.Open Stream') '-set have binary objStream.Type = 1 Response.CharSet = "UTF-8" '-load in the stream of the file (myFile) objStream.LoadFromFile '-send the stream in the answer Response.BinaryWrite (objStream.Read) objStream.Close Set objStream = Nothing Set objFile = Nothing Else ' (strAbsFile) Response.Write Response.Clear objFSO.FileExists ("No such file exists.") End if Set objFSO = Nothing end if % >

  Anyone know what is the problem here?

  shim Nicky wrote:

  Here is my browser overview of company's Web site. file:///C:/users/Sheela/desktop/NL%20Website/catalog.htm

  This is a link to a file on your local hard drive. Nobody can see that but you.

  For us to discover the site, it needs to be uploaded to a web server connected to the internet.

  It will then have a web address such as http://www.NL-Website.com , we can see in our browsers.

• New large Format printing, need help with 450 c

  Hiya, people. I'm SO happy to have met this forum. I need some serious advice with a purchase of Craigslist lightning. This morning, I picked up a DesignJet 450 c with legs/stand and a JetDirect 300 x print server. I did a quick Google search to see if the printer would work with my Macbook and the answer * seems * Yes, it will, using Gutenprint. I could not test the unit out before I forked over the money, but I have fire and managed to load paper, scroll the lightshow market, etc. Worst case, I can sell it on Craigslist.

  I've got it now houses, and I really have no idea how to do it get up and running. It is connected, turned on and it will print configuration pages (so-more in a minute), but something is not quite right and I need help, whether it is user error, bad consumables or a defective unit.

  When I load a sheet of paper and run the black print cartridge alignment routine, I get a sheet printed in alone cyan. When I run the color cartridge alignment routine, I get a printed sheet only in cyan. In fact, when I'll be whatever it is, it is printed in alone cyan. Good news is, the machine seems to be functional. bad news is, it doesn't seem to work correctly immediately.

  I removed all ink cartridges, shaken a little and reinstalled, make the flashing light "Ready" each time. That has really improved the quality of printing cyan, but they are still only cyan. I ordered the new cartridges, but in the meantime, is there anything else I should try? I have a series of questions, but I need to get the machine printing test pages correctly, I think.

  Thanks in advance for your help. Let me know what additional information you might need and I'll see what I can do.

  What is the address of the computer? It should be in the same frame. If this is not the same then the direct stream must be reset so that it can find an ip address that corresponds to your network. Outermost Jet directs reset if you disconect the power and then hold the test button and connect the power supply to. For a few seconds, then release. Wait about 1 minute and then press the test button to get the config page which should now show a new ip address. Type that ip address in your web browser, and it can have a web page where you can refine the settings to make the permanent address.

• The chain is be ignored and need help with why?

  Hi all.

  I hope again with help from the community.

  There is a chain created (code below) and it runs with success - at least she built MOST of the tables.

  The problem is: the last three tables all rely on the same condition and only two of them pass.

  The code below, step 4, steps 5 and 6 are all dependent on the success of step 3.

  When work for this string is executed, all stages of execution fails with the exception of step 5.

  The interesting thing (to me at least), is that regardless of the generation of the table is step 5 fails.  For example, in the code below prog_Y is attributed to step 5 and it fails.  If I swap prog_Y to step_4 and prog_X to step_5, step_5 still does not work.  Same result if prog_Z is listed as step 5.  While steps 4 and 6 to run correctly.

  Further info in job run lists of details: table or view does not exist.  However, I confirmed the procs behind programs every summer executed successfully and the tables exist.

  I tried several things to get more information: change the numbers.dropping/redefining step leaving down the chain and redefine, retype the steps and rules.

  Help, please.  Suggestions of why this step 5 may be at fault or where to find more information is super useful.

  Thank you very much

  Fritz

  When the string is executed partially

  /* 1. Create the string * /.

  BEGIN

  () dbms_scheduler.create_chain

  CHAIN_NAME = > 'dgr_cmpl_chain ',.

  RULE_SET_NAME = > null,

  EVALUATION_INTERVAL = > null,

  Comments = > 'Chain that loads tables of degree completion.');

  END;

  /* 2. Define the steps of the string * /.

  BEGIN

  DBMS_SCHEDULER. () DEFINE_CHAIN_STEP

  chain_name = > 'dgr_cmpl_chain ',.

  step_name = > "step_1".

  program name = > 'prog_intrmdt_1');

  DBMS_SCHEDULER. () DEFINE_CHAIN_STEP

  chain_name = > 'dgr_cmpl_chain ',.

  step_name = > "step_2"

  program name = > 'prog_intrmdt_2');

  DBMS_SCHEDULER. () DEFINE_CHAIN_STEP

  chain_name = > 'dgr_cmpl_chain ',.

  step_name = > "step_3"

  program name = > 'prog_base');

  DBMS_SCHEDULER. () DEFINE_CHAIN_STEP

  chain_name = > 'dgr_cmpl_chain ',.

  step_name = > "step_4"

  program name = > 'prog_X');

  DBMS_SCHEDULER. () DEFINE_CHAIN_STEP

  chain_name = > 'dgr_cmpl_chain ',.

  step_name = > "step_5"

  program name = > 'prog_Y');

  DBMS_SCHEDULER. () DEFINE_CHAIN_STEP

  chain_name = > 'dgr_cmpl_chain ',.

  step_name = > "step_6"

  program name = > 'prog_Z');

  END;

  /* 3. Add rules * /.

  BEGIN

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > 'TRUE ',.

  action = > 'START step_1. "

  nom_regle = > 'rule_1. "

  Comments = > 'String degree start.');

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > "step_1 succeeded."

  action = > 'START step_2. "

  nom_regle = > "rule_2");

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > "step_2 succeeded."

  action = > 'START step_3 ',.

  nom_regle = > 'rule_3');

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > "step_3 succeeded."

  action = > 'START step_4 ',.

  nom_regle = > 'rule_4');

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > "step_3 succeeded."

  action = > 'START step_5 ',.

  nom_regle = > 'rule_5');

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > "step_3 succeeded."

  action = > 'START step_6 ',.

  nom_regle = > 'rule_6');

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > ' completed and full of step_5 step_4 and end step_6 "

  action = > "END."

  nom_regle = > 'rule_7');

  END;

  /*

  */

  /* 4. Select the string * /.

  BEGIN

  DBMS_SCHEDULER. SELECT ("dgr_cmpl_chain");

  END;

  /* 5. Create a job that points to the string. */

  / * Wizard of work used to create jobs * /.

  Thanks a lot for your suggestions.  Very grateful.

  Looks like this may have been a self-inflicted error.

  There were a few other errors which confuse this explanation.  But today, this seems to be the most likely case.

  The END condition was initially step completed 6.  Turns, then step 3 successful, all the steps 4, 5 and 6 began at the same time.  Well, step 6 was shorter than the 5 step execution time.  So step 6 would end, and the end to trigger the end of the string before step 5.

  This worked constantly since the END condition has been updated in order to assess the steps, 4, 5 and 6.

  Fritz

• New to LiveCycle.  Need help with drop-down lists.

  I just started playing with LiveCycle with PDF Forms.  One thing that I wonder if it is possible to do the link of the selections available in the drop-down lists.  For example, on a form with one question on this subject, I have 5 possible answers as the "ranking of your favorite in the order of most loved at least liked fruits".  Then I have a series of 5 drop down list with the first box containing boxes "Apple, pear, fishing, strawberry, grapes.  Is it possible to have someone to make a selection in the first box, their fruit in the list, and then the second box would have four options to choose?  Say if apple was their favorite, only, pear, fishing, strawberry and grape would be selection?  I tried to find an answer, but I'm afraid I don't know enough about the capabilities of LiveCycle, and/or how to work with scripts (I think that's what I see people using).  If someone could take the time to try to push myself through this, I would appreciate it, of course.

  Here's a form to date. I had to get help from a programmer friend, so it is a code evolved. I used a script object to reduce the volume of code.

  Take a look and let me know what you think.

  Paul

• BlackBerry Smartphones Hi new to BB and need help ^^

  first of all Hello ^^

  had this great tool for a week now and already have a problem to solve

  This is not for my career but for personal use, BUT...

  I have the BB 9800 torch

  has wanted to create a folder hidden.

  I put my 2 items (images) in the folder, type 'hide' and emptied the folder...

  then I tried to delete my empty folder, I can not...

  I tried to read everythin I could on the "hide" option, but I can't solve my problem,

  I tried to sync the BB with my computer, but I can not find the folder is...

  (and on top of that, I'm french chick lol, so I'm not sure you understand what I said...)

  so, if someone had an idea, thanks and have a great day

  YAY!

  Well, reading the replies on the various problems users are incontering,

  I took my battery off for about 5 minutes, and when I rebooted and went to see in the pictures, the folder folder ' hidden non-existent ' disappeared

  happy freaking, think it was just a small problem argh...

  Oh well, thanks for trying to help me!

• New to CF and need help

  I would like to demo cfreport using a demonstration .cfr file... is there a repository for example code in CF?

  I would just see how the cfreport tag might help me make our colorful reports and be able to add graphics.

  Is there a code example I could modify my assessment of the tag (cfreport).

  Kevin

  This seems really odd. Do not forget to open the CFReportBuilder.chmfile, it should look like the following:

  

  Posts under 'Quick start' provide step by step instructions.

  See you soon

  Eddie

• New Pack PDF and need help to get started

  Discussed with someone from Adobe and signed PDF platoon, but now that I have made, I know not how to access and use it.  Yes, I am technically challenged!

  Hi loray1962,

  No worries! That's what we're here for! To access your subscription, you can connect directly to https://cloud.acrobat.com

  using your Adobe ID and password.

  Then, see this document for instructions for the use of your new subscription. (Note that this can take a day or two for your subscription completely treat, so if you just signed up today, you will not be able to access your subscription right now.)

  Please let us know if you have any additional questions.

  Best,

  Sara

• new to pl/sql and need help with the procedure

  Hello, I got two personnel and BONUS tables which are not bound by constraints
  
  STAFF
  ID_NUMBER HIREDATE SALARY BONUS
  ---------------------- ------------------------- ---------------------- ----------------------
  100020 12 MAY 03 13600
  100021 4 NOVEMBER 01 30000
  100022 8 APRIL 02 28000
  100023 8 APRIL 02 24000
  
  BONUS
  
  PERCENTAGE MORE_THAN_YEARS
  ---------------------- ----------------------
  0.1-3
  5 0.15
  0.3 7
  9 0.45
  0.5-12
  
  
  I am trying to create a procedure that would calculate bonus based on years of employment according to the bonus table.
  If employees sysdate-hiredate is greater than 5, it is salary*0.15%...
  I created this procedure, but I am stuck here.
  
  I calculated the duration of employment for each soldier using the slider in a loop, but I don't know how to get the bonus Board values and connect with each other.
  Please help me!
  
  create or replace
  procedure bonus_staff
  as
  cursor c1 is select * personnel;
  good true;
  Start
  FOR ITEM IN C1
  LOOP
  good: = FLOOR (months_BETWEEN(SYSDATE,ITEM.hiredate)/12) *.
  personal update
  set bonus = good
  where id_number = ITEM.id_number;
  When exit c1% notfound;
  end loop;
  end;
  /
  
  Thanks in advance...

  personal update
  set bonus = (select percentage
  bonus of
  where more_than_years = (select max (more_than_years)
  bonus of
  where more_than_years<=>
  )
  /

  You can do this in pure SQL, which operates on a game, so no PL/SQL is necessary.

  ----------
  Sybrand Bakker
  Senior Oracle DBA

• HP Pavilion TouchSmart 15-b130sa need new/charger lead and need help

  Can someone help me find the correct replacement / charger lead for Pavilion TouchSmart 15. The number on the back of the laptop says 15-b130 his.

  Don't know if it of useful or not.

  Would be very grateful if there is someone out there who has the answer.

  Thank you

  Hello

  Yes, I have. I have found some on Amazon, if the number I got is 15-130SA

  Could you please confirm this?

  Thank you

  Sandy

• New construction system. Need help!

  I have a HP Pavilion Media Center TV Desktop - GC673AA #ABA m8100n with a broken motherboard.

  I want to build a new system of hp no .

  My question is: what are the parts of the my old hp system, can I use to build the new system without compatibility problems.

  Thank you!

  Message edited by Captain on 15/01/2009 19:56

  Thank you very much!

  

• combining files; How to choose specific pages to different files? Example: (Page 2) File1, File2 (page 8)... and so on. I am very new to this and need help.

  I need to combine different PDF files-specific pages. How do I do that?

  Not possible with Adobe Reader.