Editing error "folder with runtime embedded.

Similar Questions

• Error-18002 with runtime LV

  Hi knows all forum

  In the attached file, I have a VI called CheckFileSrvForGODialog.vi in the ModelSupport folder. When I try to add this file as 'Action' TestStand 4.1 stage I get an error-180002 "the VI is not executable. Most likely the VI is broken... ».

  I see this error only when I use the LabVIEW runtime engine as my LabVIEW adapter. If I use the LabVIEW Development as my adapter it runs without error. (with LabVIEW 8.6).

  I made sure that the correct files are in the searchDirectories of TestStand and I searched this forum and tried different solutions I found others. Drunk, alas, none of this seems to help.

  Any good suggestions?

  B.R.

  Martin

  Hello Martin,

  You run your sequence on your development machine or a machine target that you have deployed on? Which version of the runtime LabVIEW you configured the LabVIEW card to use? If the CheckFileSrvForGoDialog.vi or one of its subVIs are not registered in the same version of LabVIEW that the Run - Time Engine that you try to run with it, you will receive error-18002. Have you tried mass-compilation of your CheckFileSrvForGoDialog.vi? Reasons why you may receive this error, see the following Knowledge Base Article:

  -18002 errors in TestStand

• Flash CS6 does not not create an .app file when I output as application with the embedded runtime

  I'm looking to create an application with the embedded runtime, but the process keeps failing without raising an error. More precisely: in settings of the Air, I select output as follows: Application with the runtime shipped. When I build this way, Flash tells me that he created the Telepath tactical - Steam.app...

  

  .. .but no never .app file really does appear in the folder:

  

  This happens regardless of what I included in the library path and default binding settings. (When I say that it out as follows: Windows install, on the other hand, the appropriate exe file opens without problems.)

  I use Flash Professional CS6 v. 12.0.0.481 on Windows 7, 64-bit.

  So, I found this one: this problem was caused by an old .fla (original created in Flash CS4 or something like that) that had been converted over time to be compatible CS6. Recreate the .fla from scratch in CS6, corrected the problem.

• I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe.

  original title: error with ehshell.exe

  I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe. Could you help me?

  This problem exists since the 1st Media Center. SP2 and SP3 had a difficulty, but it is obvious that it doesn't always. The same problem still exists in Vista today with a lot of other carried over from XP. System restore would work, but you do not have any good restore points so reinstall an operating system seems to be your only option.

  You probably don't want to do an OS reinstall you need for Media Center, but since it does not at all, you might want to play then remove the Media Center updates and or SP3 and reinstall them.

• Adobe AIR desktop application with an embedded runtime

  Hello

  What is a desktop application Adobe AIR with an embedded runtime (independent/portable) than Kropotkin work of Windows on a Mac too much on?

  Thank you

  No, you have to compile a 'bundle' with ADT on each platform. Under Windows, it creates a directory with a .exe and the AIR runtime. On OS X, it creates a .app file.

• CS6: AIR (runtime embedded) creates a large number of files instead of an exe file

  I want to pack all the necessary sources for my application into an exe file (windows system 7).

  In Flash Professional CS6 I chose: file-> Public settings

  Target: AIR 3.4 for desktop

  Parameters of the AIR: export in the form: Application with the runtime shipped

  Window style: Chrome system

  Render mode: Auto

  Profiles of office / Extended Desktop

  Then I pressed on publish. I got the message "Application with the embedded runtime has been created.

  What I want: a single exe file without dependency on other files/directories

  What I got is a structure of directories like this:

  Untitled - 1.app

  Adobe AIR

  META-INF

  MimeType

  Untitled - 1.exe

  Untitled - 1.swf

  In this directory, my Untitled - 1.exe starts without problems.

  But if I copy the exe file (and ONLY the exe file) to another directory

  and try to run it I get the message of AIR was not found.

  So my assumption was right that not all necessary files were packed.

  How can I present all the necessary files/directories in an exe?

  Hello

  This is a limitation of - windows operating system. The .app embedded on Win application package will appear in the directory of the file.

  Untitled - 1.app

  Adobe AIR

  META-INF

  MimeType

  Untitled - 1.exe

  Untitled - 1.swf

  If you look, Adobe AIR contains the AIR runtime required to run the .exe application. Therefore, you must copy all the contents of the Untitled.app folder on the victory.

  Thank you

  Meenakshi

  Flashpromanager.new Engg team

• Error initializing Java Runtime Environment.  You may need to reinstall Flash.

  ... It's really annoying.

  I work with adobe cs5. Recently, it started to not work. I have to restart again and again so that it can compile a swf properly. I'm trying so cs5.5. I get this error "error initializing Java Runtime Environment.  You may need to reinstall Flash. »

  So im like OK... This is useful...

  -Reinstall flash-

  "Error initializing Java Runtime Environment.  You may need to reinstall Flash. »

  ...

  -Reinstall java-

  -Reinstall flash-

  -Reinstall adobe flash cs5.5-

  "Error initializing Java Runtime Environment.  You may need to reinstall Flash. »

  ...

  -google-

  If I came across this post. Follow it exactly.

  "Error initializing Java Runtime Environment.  You may need to reinstall Flash. »

  ...

  I have change the thing in the file to Xmx1024M

  "Error initializing Java Runtime Environment.  You may need to reinstall Flash. »

  ...

  Just on the forums.

  What should I do now?

  I found a solution that works for me.

  Just delete the file jvm.ini under the location of the temporary folder. In windows, it would be under path.

  C:\Users\USERNAME\AppData\Local\Adobe\FLASH_VERSION\en_US\Configuration\ActionScript 3.0

  For example. C:\Users\admin\AppData\Local\Adobe\Flash CS6\en_US\Configuration\ActionScript 3.0

  As soon as you start the Flash, a defult jvm.ini will be created automatically, in this place and your flash works fine.

  Acutally the error comes because of the jvm.ini of corroupt file (cause too great values > 256 error displayed.) For example. Xmx1024m) that is created in setting up temporary forlders automatically during the Installation of Flash.

  Whenever Flash begins his search the file jvm.ini and let the maximum memory of initalized at FMV.

• Why open links in Firefox causes a "Server error in ' / ' Application Runtime Error" but not in "Internet Explorer"?

  When I click on certain links in an e-mail message (and Firefox is the default browser), I get the following error:

  In the Application Server error ' / '.

  Runtime error
  Description: An exception occurred while processing your request. In addition, another exception occurred during the execution of the custom for the first exception error page. The request was interrupted.

  If, however, I follow the same links (and Internet Explorer is the default browser), I get no error and the good content of the link is displayed.

  What is causing this error? As I prefer Firefox, how can this problem be fixed?

  Windows 7 Service Pack 1 operating system
  Firefox Version 32.0.1
  Internet Explorer Version 11.0.9600.17280

  Thank you for your help.

  First

  When you look at the address in the address bar, it seems to coincide with the e-mail?

  It seems that Firefox has sent the server something it was not expected. Sometimes this can be caused by obsolete or damaged cookies - assuming that you have visited the site before. It could also result in changes of standard information sent to servers such as the string 'user agent' that specifies your version of browser and operating system.

  To clear cookies for a site, while displaying a page on the site, either:

  • Right click and select View Page Info > Security > "View Cookies".
  • (menu bar) Tools > Page Info > Security > 'view the Cookies '.

  Then try to reload the page. Who help me?

• How delete/rename/edit a folder?

  Original title: how the * can I delete/rename/edit a folder?

  Everyone? Buehler... Buehler... Buehler...

  Hi Michael,

  Please write to us with the following details so that we can help you best.

  (1) the files or folders you are trying to change, delete or rename?

  (2) what is the location of the files?

  (3) do you meet any question while to change, delete or rename files or folders?

  (4) have you connected to your computer as an administrator user?

  I inform you that you should not remove, modify, or rename any system or operating system files. You can follow the steps below.

  To remove a file or folder

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/windows_fcab_delete_files.mspx?mfr=true

  Rename (ren)

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/rename.mspx?mfr=true

  To modify an existing file type

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/win_fcab_reg_filetype_modify.mspx?mfr=true

  Write us with the details asked. We will help you to come.

• How to remove the folder with name

  Hi all

  I had created a folder with a name, using ALT + 0160, but now iam not able to delete or rename it.pls tell me how to remove it.

  You get an error message when you try to delete it?

  Boot into safe mode and see if it will remove. If this is not the case, try this tool.

  Unlocker File Remover

  Download it from FileHippo
  http://filehippo.com/download_unlocker/

  Download from CNET
  http://download.CNET.com/WOT/3000-2378_4-75011499.html

• Windows Explorer crashes when you open any folder with MPEG2 files.

  WinXP SP3 - When you open any folder with MPEG2 files, windows Explorer crashes. If the folder contains only the MPEG1 files, it opens without a problem. We first thought it was a problem of media player, but we can not even click on a file to open it in media player.

  Hi kathyd,.

  ·        You did changes to the computer before this problem started?

  Since we do not know what is causing this problem, I'd suggest unanimous the event viewer on your computer and check the details in the window logs messages/error codes important related to the question, during the time where this problem occurs and after return.

  Event logs can help you identify and diagnose the source of current system problems or help you predict potential system problems.

  Access the link below to learn how to view and manage the event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  You can try to start both computers in safe mode and check if it can open the folder where the MPEG 2 files are stored and if windows Explorer crashes. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

  I hope this helps. Post back with the required information.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• ____2. I have Windows Vista Home edition is possible with Windows XP prof sp2 Remote Desktop connection? __othervise how?

  • I can't share internet and file simultaneously? If I share internet file sharing and disappear on the other PC if I share folder and run I can't share internet...
  • 2. I have Windows Vista Home edition is possible with Windows XP prof sp2 Remote Desktop connection?
  • othervise how?

  Remote Desktop connection is not available in Vista Home: http://www.howtogeek.com/howto/windows-vista/turn-on-remote-desktop-in-windows-vista/.

  I need more info on how your network is configured to answer the question on the other.  How is the computer connected to the internet?  It connects wireless or cable to the router or modem or through ICS from another computer or what?  How do you change between the sharing of internet connection currently?  What happens when you try to enable both connections at the same time (or do not have two connections)?

  Thank you.  The answers above, I can be able to understand the problem, because right now I really don't know how you setup and I need as much information as you can provide about it.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• X 230 error 1802 with the Correct WLAN card

  Recently, I ordered my brand new x 230 for the start of the University and selected the thought of WLAN card default option which would be sufficient for my needs. After the hand signal and dropouts, problems I decided to upgrade the WLAN card that would improve the signal strength.

  I know the existence of the 'white list' frustrating that means that some cards are allowed to use. So, I went in the store of Lenovo and looked for what was the best WLAN card that might come with a new order of a 230-System x, as surely they are on the whitelist.

  Later, I bought an Intel Centrino Ultimate - N 6300 card and installed correctly in my x 230. However, from the start I saw to my despair that the 1802 error was there, tells me my card has not been approved. Could someone explain how hell a card that can come already installed in x 230 is not did not whitelist checking?

  Needless to say I am not very satisfied with Lenovo, because I can't even find a list of what cards are accepted. What is the point in a white list anyway? I am a student trying to patch BIOS to remove it, but no one has yet done a patch.

  Why do I get an error 1802 with this card?
  Thank you.

  Hello and welcome,

  Doesn't have that 6300 come from the store of Lenovo, or from a vendor who said it was for a Lenovo laptop?

  The card type is not the whole story when comes to the white list.  In addition to the correct (6300) type by its PCI vendor and device ID, it must have an ID of subsystem of Lenovo.  (IIRC, it can be more precisely not the subsystem ID, but the effect is the same).  A generic 6300 will not work.

  A card must be sold by Lenovo or pass the white list.  Reputable suppliers will provide a number of Lenovo FRU (CRU) to check the FRU list for the machine.

  For example. Since the research database of Lenovo parts -> ThinkPad X 230page, the RUF for that 6300 is 60Y3233.  It was not easy to find.  The RUF are not in the hardware maintenance manual any more

  If your card has a number of Lenovo FRU, something else is in place.

  [edit] types andyP faster as I do...

  Z.

• I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete."

  I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete." I tried to reinstall the driver when the computer prompted me to do it, but there was an error with this as well. My computer will not all read the disks.

  Original title: Matshita DVD-R UJ 890

  Hi AJordanMiller,

  Try these methods.

  Method 1

  Run the fix - it from the link below.

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2

  See the help article:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  It will be useful.

• BlackBerry smartphones dreaded 0x3b21 error sync with Curve 8310 DM 4.7 on XP pro 3

  No joy with 4.7 DM to DM 4.6 (4.7 by the grip of way on the recording of "modules" when installing like 4.6 done so!)

  Here's the video:

  http://www.YouTube.com/watch?v=u6tS8vvokEM

  (I have many more like this for 4.6, the DM is facing problems in my humble OPINION)

  CK on:

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB01451&sliceId=SAL_Pub...

  (where is the Permanent URL of tracing?)

  I'm not alone in this struggle, so I hope that some will benefit from the demo above.

  I had no SUCCESS in sync my curve for more than two weeks... (I'm looking more to the Iphone and Android now).

  That said, I need of those in the know to decipher this cryptic message. In fact, I need a fix. Let someone else read this and tell me the solution or workaround.

  This is my journal of trace

  Mon Dec 15 20:36:59 2008 - Intellisync Log file.

  Mon Dec 15 20:36:59 2008: error loading system failed - {F64973FB-7CB0-460E-9DCC-36A023757617}.4151 a.\iluptbl.cpp line 245
  Mon Dec 15 20:37 2008: error loading system failed - {F64973FB-7CB0-460E-9DCC-36A023757617}.4151 a.\iluptbl.cpp line 245
  Mon Dec 15 20:37:03 2008: error 0 x 80040107-2147221241-2088370138 a.\olkfolders.cpp line 393
  Mon Dec 15 20:37:03 2008: error 0-2088370138 a.\olkfolders.cpp line 322
  Mon Dec 15 20:37:03 2008: error - 2088370138.0 at la.\OlkFolders.cpp line 152
  Mon Dec 15 20:37:03 2008: error 4237.4237 to la.\callback.cpp line 1103

  Landry says:

  I had the same error occur with DM 4.6 with my Curve 8310. I got the job of synchronization at the beginning, but it has stopped working shortly after. Once I made the debug log, I found the same error 0 x 80040107 a.\olkfolders.cpp. So I decided to create a new Outlook profile and switched DM to use instead and everything is good! Just to let you know, I couldn't even change the Configuration of the synchronization without seeing the error.

  I just got the phone recently so I guess while I was trying to understand the configuration that I had made a change somewhere in Outlook or DM and that caused the errors occur. DM uninstall and delete all settings are a complete waste of time.

  Create a new Outlook profile seems to be the fix for me. And like you, the uninstall has been a waste of time. Moreover, I had no joy with the edition of the Configuration of the synchronization without seeing the error.