EIT OS-260

Similar Questions

• How the other drive app option to calculate calories? I did 45 minutes yoga with him and he showed the 260 callus which is high of 45 mins of yoga session.

  How the other drive app option to calculate calories? I did 45 minutes yoga with him and he showed the 260 callus which is high of 45 mins of yoga session.

  ISuspect that is not correct.

  Hello

  Saving workouts through the app to drive using others as the type of activity, active calories are estimated at a rate equivalent to a brisk walk or based on the data recorded by the heart rate sensor, according to what is higher.

  The following steps can help to improve the accuracy of the estimates made by your watch:

  • Estimates for calories and other results depend, in part, your personal information. To verify that it is accurate:
    • On your iPhone, in the application of the watch, go to: My Watch (tab) > health > Edit (top-right).
  • While training, to optimize the performance of the heart rate sensor (data from which is used when estimating calories), make sure you wear your watch fits on top of your wrist. Apple suggests that consider you the clamping Strip before starting a workout and it loosen again thereafter.
    • Note that the heart rate sensor is likely to give better results for the workouts that involve rhythmic (such as running) rather than the irregular movements.
  • Calibrate your watch can improve the accuracy of various estimates related to the activity, including estimates of calorie. To calibrate your watch, follow the instructions in the link below support article. You can reset your calibration data and start the process:
    • On your iPhone, in the application of the watch, go to: Watch My > privacy > Motion & Fitness > tap reset Calibration data.

  More information:

  Use of the workout on your Apple Watch - Apple Support

  Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

• Slimline 260-p026: how to start my 260-p026 from a DVD?

  I need to start my new 260-p026 since a DVD disc, so I can try to recover the data backed up from my defunct old PC. When the PC starts, I don't see any messages from the BIOS advising me how can I access the BIOS settings (I assume here that I simply need to change the order of boot... right?)

  Please advise how to do it.

  Hello:

  You must go into the BIOS and enable legacy mode and disable secure boot to boot from a DVD.

  It is a new starting procedure with all the PCs that come with the W8 or newer.

  Please see this guide for information on where to access these settings.

  http://support.HP.com/us-en/document/c03659945/

  I prefer rather than to change the boot order, press the ESC key at the beginning of the HP welcome screen for list options.

  Select the F9 boot options menu, and then select the DVD drive in the list.

• HP 260 G4: enter the administrative password

  Hi can you help me that my laptop is hp G4 produced 260: NOZ78EA #ACQ the problem, is that it continues to ask for an administrator password or power on password so I don't find it and after that I have try typing the password 3times these numbers comes to the off screen 68579207 system

  @siyabonga1

  Enter 77451829

  Kind regards

  DP - K

• 260 Mini G1: change the language of the BIOS on a HP Mini 260 G1

  I just got my Mini G1 260 a supplier online German and the BIOS language is set to German. I can't find a way to change the BIOS language in English (or French).

  Haven't tried the BIOS Configuration utility as my system is not in the list of compatible hardware.

  I tried to Flash the BIOS with the latest version on the HP site, did not work.

  Trying to clear CMOS (both by pressing the clear CMOS button and removing the battery) but the default values of the BIOS in German anyway.

  What can I do to get it in a language I understand?

  Thanks in advance for your help.

  Called support and the solution is pretty simple: just press F8 in the BIOS, easy as that.

  Why is this documented anywhere? Hope that now, at least, this will help other people with this stupid problem.

• Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system?

  Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system? Earlier when checking for updates it had compatibility problems. These issues have been resolved for me operation secure with Firefox 4.0?

  According to the guru on the ZoneAlarm user forum, Firefox 4 and other new browsers won't be compatible with the new version of ZoneAlarm, releasing. See:

  • http://forums.zonelabs.com/showthread.php?t=76985 & highlight = Firefox

  "You must update the following plugin:

  • Adobe PDF plugin for Firefox and Netscape 8.2.6
  1. Check your plugin versions on one of the following links:
     • http://www.Mozilla.com/en-us/pluginCheck/
     • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
     • Note: plugin check page lacks information about all versions of the plugin
  2. Update of Adobe Reader (PDF plugin):
     • Within your existing Adobe (If you have already installed) drive:
       • Open the Adobe Reader program in your list of programs
       • Click Help > check for updates
       • Follow the instructions to update
       • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
     • Download the full installer (If you have NOT installed Adobe Reader):
       • SAVE the installer to your hard drive (save to your desktop so that you can find it after downloading). Exit/close Firefox. Run the Setup program that you have just downloaded.
       • Use one of the links below:
         • https://support.Mozilla.com/en-us/KB/using+the+Adobe+Reader+plugin+with+Firefox (click on "Install and update of Adobe Reader")
         • See also the download link': http://get.adobe.com/reader/otherversions/
     • After installation, launch Firefox and recheck your version.

• Slimline Office 260-a020: install Windows 7 Home Premium on a new machine Windows 10?

  Just got a new HP 260 - A020, but I used Windows 10 library for 3 weeks in the meantime and have no use for the clumsy, stupid thing, overworked or otherwise for his reputation as a Big Brother. (also software security 3 deep at the top of the paranoia of pull-the-plug, had a hint of malware, so Win7 is a lot never secure enough for a few years).
  ... The old hard drive is always good, so I intend to drop that in an external case to recover files from 2-3, that have not been backed up, which first use as a boot drive, then for the time being that the backup with Windows7 on the machine itself.

  ... EXCEPT - warnings of Best Buy Sales & Geek Squad, as well as messages here on how a 'modern' machine may not recognize the old drivers - LaserJet not only but things such as video, network, disk HARD, USB etc.
  ... But in the months before July 29, I've seen a hundred proposals to put 7 or 10 on a disk/partition bootable by means of hedging against the transition and never a mention of this problem. If a native Win7 machine works very well with Win10 and new drivers but not the reverse?  or download Win10 preserve the old drivers?

  Hello:

  There are too many unknowns to give you an answer about your plans.

  I looked at the specs for this PC and I do not see why he cannot run W7 if you have a W7 64-bit installation disc and product key.

  You will need to enable legacy in BIOS mode and disable secure startup to launch W7.

  Looks like you can get all the drivers you need directly from websites of the manufacturer of the item (AMD and Realtek) and the driver for the card from another PC of HP wireless.

  The unknowns about what you want to do...

  Most likely simply plopping the other PC in the new disc it will not work.  Startup files are different, etc..

  Then there are potential legal problems...

  If the hard disk that you plan to install in the new PC has an OEM operating system, it is forbidden to transfer the OEM of the computer operating system, it was originally installed in, to another PC.

  An OEM operating system is the one that came with a PC when you bought it (like Dell, HP, Gateway, etc.).

  Only, you would be able to transfer an operating system of detail from one PC to another.

  In summary: this PC yourself running W7?  Probably, Yes.

  Can you put the hard drive currently with W7 top in your new PC and expect it to work?  Probably not.

• HP 260 G2: USB does not work with W7 x 64 installation ENT

  I have a new G2 of 260 HP, when I proceed to the installation of W7 x 64 USB business, after th e first loading, USB devices does not work. I tried with the utility of th 'Installer_Creator' from Intel, but with the same result.

  You can someone help me with this issue?

  Thanks in advance

  Mauro Caputo

  Hello:

  You must run this utility...

  https://Downloadcenter.Intel.com/download/25476/Windows-7-USB-3-0-creator-utility

  Your only other option would be to use a PS/2 keyboard and mouse to complete the installation and then install the drivers for Chipset and USB3 you need.

  or see this post for an alternative solution.

  http://h30434.www3.HP.com/T5/business-PCs-workstations-and-point-of-sale-systems/HP-prodesk-600-G2/m-p/5485092#M11107

• HP 750-160qe (envy): cannot add a new PCI graphics card: MSI Radeon R7 260 1 GB

  Installed MSI Radeon R7 260 in empty PCI e 3 X 16 PCI slot. Voltage and power key lighting comes on for 2 seconds then off.

  Remove the card and click OK. Card requires the additional plugin 12VDC 6-pin that is

  This is a new PC with a 500W PS but with integrated graphics Intel insufficient...  What is a housing problem? A problem of 12VDC

  or a Bios problem or should I return the HP PC and buy something else. Enjoy a preview.

  Hello

  Review of HP articles posted below.  The article refers to Windows 8, but they should also apply to Windows 10.

  HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

  Thanks for posting on the forum.

• X 260 m2 ssd

  So, I'm finally looking to upgrade my X 220... Honestly, nothing wrong with it still runs great, I just can't stand the low screen resolution more.

  So I was wondering if anyone knows if the X 260 has a ssd slot internal M2. If I get one I want to get one with the standard hard drive to save, then get a M2 internal ssd for OS/apps drive.

  I'm not find much info about it.

  Thank you.

  Nice day.

  Manual material: https://download.lenovo.com/pccbbs/mobiles_pdf/x260_hmm_en_sp40j72016_01.pdf

  shows only a reader of standard style. No indication for a slot with SSD compatible m.2.

  Hope this helps to clarify a bit.

  Kind regards.

• Windows Vista does not recognize external USB 260 GB HARD drive

  I have a 260 GB Seagate external hard drive, a laptop Toshiba satellite and Windows Vista Basic.

  The same Windows usually choose the hard drive when I plug it, it does not appear in Device Manager and in disk management, the only way I can get it to work is to uninstall all the USB root hub and then restart the computer, and then reinstall the USB root hub and plug my hard drive.

  When windows finally recognizes him, the only way to find the driver must choose c:\ manually and there's the search for the computer.
  Works for the time that I have the computer hard disk, but when I stopped it, next time I use the computer, I'm having exactly the same problem.

  I tried to remove the hard drive safely and then close the computer and by him plugging back in after windows has loaded, I tired it connected from the computer and tried to close the computer with connected.

  None of these work.
  Can someone help me please?

  Strange?  :|
  But what need s say Microsoft Windows so I don't expect 100% without bug OS ;)

  Disconnect the USB HDD and remove all the USB ports and Device Manager USB controllers. After restarting again the OS should reinstall ports. Then you could try to reconnect the HARD drive.

• X 1 yoga (and Yoga 260) does not wake from sleep

  Hello

  We got 2 x try and buy Lenovo Tablet portable Yoga (a X 1 Yoga and a Yoga 260) to assess their skills for our company, because we have the intention to upgrade many of our employees laptops. However, since we got the devices we noticed on two common problems with display and waking from sleep. Very often laptops awake properly with the screen remains black. In these cases, the backlight of the display seems to turn on, and I guess the system works somehow in the background. Put the computer to sleep again (for example, by closing the lid) makes the computer wake up correctly at the second attempt.

  Different error in the same category is when a video is running and the laptop is connected to AC - plug the AC cord is black screen while playing the media kept its content.

  All drivers have been updated to the latest version via 5.07.0029 Lenovo system update.

  Any ideas? I also tried to open a support ticket, but Lenovo wanted to send and install a new (!) presentation. Apparently, it seems like a driver/software problem?

  Best regards

  After finishing with a touch screen not responding not (as far as I can tell a result of v4.19 Touch Firmware Update) on top of the issue of the sleep-wake I'm frustrated and went through the process of reinstalling the entire system.

  I used the reset at startup procedure to put the system back to factory settings. After factory reset the sleep-wake issue had disappeared. I applied about all the updates that are currently available via Lenovo system update and everything still works as expected. Still strange that this issue was not solvable by any other means before...

  Interesting effect: after the reset of the touchscreen remained non-functional. After a few days without touching the laptop screen feature has finally decided to detect the HID. I certainly did not apply to update or change. 'Miracle' is almost an understatement in this case!

• X 260 battery order

  I can't get my 260 x to use external battery first making the powerbridge worthless device. I've seen different solutions mentioned here but nothing I have tried seems to work?

  Cgknight1,

  In response to customer relationships that discharge of internal battery before the external battery, instead of the external battery first as expected, on X 260 of discharge ThinkPad, Lenovo has presented a solution via the BIOS update.

  CHANGES IN THIS VERSION

  Version 1.21

  [Problem resolves]

  -Fixed a problem with the battery charge/discharge sequence incorrect.

  BIOS v. 1.21 can be downloaded here: http://support.lenovo.com/us/en/products/Laptops-and-netbooks/ThinkPad-X-Series-laptops/ThinkPad-X26...

  Thank you

• Yoga 260 do not SLEEP when the lid is closed

  Hello

  Sometimes when I close the lid off my Yoga 260 Windows 10 do not go to sleep.

  The behavior is really weird because the red light on the cover flashes like when it is in "standby", but I can hear the rotating fan.

  When I open the cover, it's even more bizarre. Windows are not locked and I am not asking for a password. The whole system is very laggy. The mouse moves in jumps, and there is not any response to keyboard or touchscreen. After a few seconds/minutes, the system is suddenly OK as nothing happened.

  Is not happening all the time and I wasn't able to see any model, when this happens.

  What should I do to get rid of this?

  Thx for the help.

  I tried to disable the special function of Lenovo for rapid reactivation in 15 seconds after closing the lid and it seems to be OK now.

• Satellite A110-260 - USB ports do not work

  Hey!
  I have a Satilite A110-260 of my brother.
  The problem is that the USB Ports do not work :-(

  They go into the hardware Manager, but I can't install it.
  I have download the hardware installation of the Toshiba homepage but... :-(

  Can you help me?

  Sincerely of John

  PS Sorry for my English ^^

  Can you please tell us what OS are you trying to install?
  SP1 or SP2?

  Please after the installation of the OS, the first thing you need is install driver Chipset.
  Did you install the right one?