Ejection in any SECURITY USB Ext. HDD problem

Similar Questions

• Missing in ext HDD PH3100U-1EXB Toshiba backup software

  I just bought a Toshiba 1 TB ext HDD PH3100U-1EXB and have only been using it on a USB 2 connection.

  I am running Windows 7 on a computer and Windows professional XP on another machine. I have copied files to and from the drive successfully, but cannot access the virtual CD drive to try installing the backup.

  If I use Windows Explorer, I can not open the virtual CD drive.
  How can I get the backup/restore software?

  Is there a way to reset the CD player to access the software?

  Thanks for any help.

  I'm having a similar problem. Shortly after that I backed up the hard drive of my PC, the virtual CD cannot be opened by Windows and the virtual CD icon disappeared, although the partition still appears as another drive, but when I try to see it I get a message that Windows does not recognize, it's may be damaged.

• USB connected HDD not displayed in my computer

  An old sata HDD I temporarily connected via a usb adapter is registered as a usb storage device and a player in the hardware device manager.  But not entered as a drive in my computer, why?  I don't see how I can format it for use.

  Hello

  1. do you see a red or yellow glow next to this hard drive on Device Manager?

  2. were you able to use the same hard drive without any problem before?

  3. have you made changes on the computer before this problem?

  4. are you able to see the drive in disk management?

  5. are you able to use any other USB device?

  The following article might be useful:

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  To start disk management, follow these steps:

  1. connect you as an administrator or as a member of the Administrators group.

  2. click on Start, click run, type compmgmt.msc, and then click OK.

  3. in the console tree, click disk management. The disk management window appears. Your disks and volumes appear in a view chart and the list view. To customize your perception of your disks and volumes in the shutters upper and lower the window, point to top or bottom on the view menu and then click the view that you want to use.

• I am more able to transfer files to my ext hdd

  I have resorted to an ext hdd (Samsung) with my windows vista laptop for over a year with no problems at all, now all of a sudden I am unable to cut /paste, copy / paste or drag. A 750 MB file takes 20 minutes and is unusable when it finally comes. I'm still able to open all of my existing files I have on the ext hdd, without problem, but can't copy the new files to it. Help!

  I have resorted to an ext hdd (Samsung) with my windows vista laptop for over a year with no problems at all, now all of a sudden I am unable to cut /paste, copy / paste or drag. A 750 MB file takes 20 minutes and is unusable when it finally comes. I'm still able to open all of my existing files I have on the ext hdd, without problem, but can't copy the new files to it. Help!

  On any computer?  (Try another computer.)

  It could be that the external hard drive is going bad.  Have you tried to use your backup copies of the files on the drive / another drive on the same computer?

• My 32-bit Windows 7 computer is used to save to ext hdd daily, well... then it just yesterday stopped by himself... :( Someone knows why?

  Hello. My 32-bit Windows 7 computer is used to save to ext hdd daily, well... then it just yesterday stopped by himself... :(   Someone knows why?

  I have explored a bit, but could not find answers, but I managed, a few minutes before, FORTUNATELY, to allow my computer its 'pilot' automatically update, in the future... :)
  - But I couldn't see any solution to my problem... :(
  PS - There are 135 GB of free space on my 150 GB ext hdd, so its certainly not complete...

  Hello

  I'm glad that you were able to solve the problem. I suggest that you post the second query by creating a new thread. This allows to avoid confusion.

• Cannot eject external hard drive USB

  Original title: problem ejecting usb mass storage device

  Hallow

  I have a WD drive and when I try to remove it safely I get the following error:

  "the application".

  '\Device\harddiskvolume4\Windows\System32\svchost.exe' is

  This device can be stopped. Close the application and

  then try to stop the device again.

  p. s.

  I have important data on this disk

  This error does not occur with any other usb

  I tried the Task Manager

  throws his mercy on me I'm not a computer genius and

  my English is not the most brilliant as you have probably noticed

  Thank you to everyone willing to help

  Itay

  Hi Itay,

  Thanks for posting on Microsoft Community.

  I understand that you get this error "the application \Device\HarddiskVolume4\Windows\System32\svchost.exe prevents this device to be stopped. Close the application and then try to stop the device again. "Whenever you try to eject the external hard drive.

  You may get this message if Windows was started with the inserted disc. Try to wait until Windows is completely loaded before inserting it, then if you try to eject it doesn't work.

  You can try the suggestions below and check if it helps.

  1. Download Process Explorer from the link below http://technet.microsoft.com/en-us/sysinternals/bb896653
  2. Click search, find handle or DLL (Dynamic Link Library) in the tool menu.
  3. Type the drive letter of the USB device in the handle or DLL substring text box and press the search button.
  4. Find the process and its PID (process identifier) in the following box.
  5. In the tree of the system process, find the process according to find it handle or DLL dialog box.
  6. Press Ctrl + H to display the handles in the view in the lower pane.
  7. Search for the file by the drive letter and right click, choose Manage close.

  Reference:

  Problem ejecting USB mass storage device

  http://support.Microsoft.com/kb/555665

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Please do not hesitate to contact us for any further assistance on Windows.

• Pavilion series 6, P6 - 2220t: HP Pavilion P6 - 2220t. All security USB connections are turned off in the BIOS. Need to turn it on.

  I was told that all security USB connections is disabled in the BIOS. The only controls for this PC is USB ports for mouse and keyboard control ect.  How can I get into the bios without keyboard and mouse in operation? There is no other way to control this model computer. The only connections on this PC is only the USB connections. Again, if I can get somehow get into the BIOS I can enable security USB connections as it should.

  UPDATE,

  Fixed a problem.

  I have install a market after card bipassing USB bios usb connections.  I went in the BIOS and turned on USB connections. I figured out the EASY DIFFICULTY and solved the problem myself. No other technology needed in this case.

  Very EASY SOLUTION!

  Thank you

• Access remote USB to E3000 problem?

  Hello

  I recently got the E3000 router because it has USB and is simultaneous dual band router.

  It is connected to the ATT modem + router. I disabled wireless 2wire ATT modem and connected the linksys router.

  Now, after much playing with it, I have configured the USB key to work and being visible on the network, Media Server also seems to work very well.

  Now I need help with the following:

  Now what I'm trying to do is have remote access to my USB connected hard drive on the internet.

  Also, I want to put the USB HDD as media download drive. For example if I'm downloading a large file or download torrent I want it either directly into the USB connected HDD.

  Also in my computer/network, I have the disc visible as a computer and when I double click on it, it ask me for the admin and password user id and I have access available files, that I do not understand why is this? Because the same thing can be achieved by "map network drive" then what is the difference between the two?

  Waiting for answer

  Thanks for the help guys

  For your 1st question: Yes, the problem is with your configuration. The E4200 needs direct access to the internet, but in this case it is "hidden" behind a NAT (your att gateway) device. You must find a way to dumb down your front door so that it becomes just a modem.

  If you have att u-verse, then you must look for a story on your gateway 2wire called demilitarized zone more and put in place to allow your router to be seen on the internet that will allow you to remote access to the storage unit.

  As for your 2nd question: there is no way to do it. Your pc should be while you download files.

• Win7 - when I click on 'Computer', it shows how completely my drive hard internal is, & how of my full ext hdd. My ext hdd is in - the red zone. How to get out?

  Hello. I HOPE I HAVE POSTED THIS QUESTION IN THE RIGHT CATEGORY - I CAN'T SEEM TO GET IT RIGHT... -, I am bad & a 'Newbie'.

  (Q) my ext hdd is in - the red zone in 'Computer' in the lower right corner, when I click on it...

  (1) this is what worry?        (2) how do I get it out of the 'red zone '?                  It is actually said "Local disk (e :)) 13.5 GB free of 149 GB" (which includes a "System Image" - if I remember correctly). To do this, "incramental' back-up, I think...

  Thank you, Chris.

  We use the term "housekeeping."  It's when you wipe the hard drive

  Formatting seems ok, but actually considered clearing, repartition the drive.

  http://en.Wikipedia.org/wiki/Disk_formatting

  I suggest you do a normal backup and then differential periodically.  This avoids that the difference between the initial backup and changes made to the files.  If you are happy with the changes, do the differential backup.  When you make other changes and that you do not have the old files, it is safe to do a new differential backup and delete the previous.  This saves disk space.

  Description of full, incremental, and differential backups

  http://support.Microsoft.com/kb/136621/en-us

  You can save the backup on DVD files and store them still freeing up hard drive space.  In addition, it is recommended to store them in your home disaster (earthquake, fire, etc.).  Ex: Safe, best friend or the relative's House.

  How to create a system - another form of backup Image needs the system crash

  http://www.howtogeek.com/HOWTO/4241/how-to-create-a-system-image-in-Windows-7/

• Hi, I m looking for a decoding of the 0x6101be5 fault code. Any idea to solve this problem?

  Hi, I m looking for a decoding of the 0x6101be5 fault code. Any idea to solve this problem?

  Type of the printer is Photosmart D5460

  Thanks a lot for hel

  steviedanielle

  It could be a work around. each time u replace each cartridge. Turn on the printer and check if that make all the difference... Although the chances of losing these cartridges are more unless your next printer uses the same cartridge

• How to activate an old adobe acrobat computer XI edition from an obsolete laptop to my new laptop? I bought this product for my school, and we can't talk to any clown to rectify the problem, here in New Zealand!

  How to activate an old adobe acrobat computer XI edition from an obsolete laptop to my new laptop? I bought this product for my school, and we can't talk to any clown to rectify the problem, here in New Zealand!

  Install it on your new laptop using your serial number.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Project of restoring links on the other computer, with the ext hdd same source files

  I was working a project with all the source files for the project on an ext hdd. This machine in particular, then crashed and I have more access to it. data recovery after extensive (and expensive), I got the program from the old pc files and some of them include the first pro files. Is it possible to link these data, creation of a new pro, always the same machine using the ext hdd with the source files? Thank you

  That's the advantage of keeping your external media.

  Just open the project first on the new computer.  So you should not need to be reprinted media if the external drive has not changed its name from Volume and is saved as the same drive letter (PC).

  Worst case, when you open the project of the missing file dialog box will open.  Make sure to repeat others is checked and navigate to the folder / outside looking.

  Once reconnected, save the project and then...

  go and drop your auto save preferences to the external location, so you don't have to retrieve project files crashed in the future!

• Problem to eject memory usb and HDD extern

  Whenever I used a usb memory stick or my external hard drive, it is impossible to eject. I try to make 'safe' way but get the answer it is in use, even though I closed all the programs in which I used the memory or the player.
  When I did a safe security on a DVD-disc had used ROXIO and try to eject the DVD I got the answer "enhetsfel", which translated into English would be mistake unity?
  This is a real nuisance.
  My computer is Dell, I have Windows 7 Pro and I only used it for a few months and the problem has been there all the time.
  kindly
  Ingrid Seeger

  With the USB key or external hard drive, it may depend on what you have installed on these readers whether if a winning process accesses these files, for example indexing can be current or you may have installed a program, as opposed to just the data on the disks

  I can't answer for the Roxio err

• Problem with secure access TOSHIBA HDD 500 GB

  Hello
  I have a problem with access to my secure HARD drive. The problem is when tha HDD is pluged in the USB port, the software Nomad2 says that the disk is not formatted. Anyone have idea what type of partition is assembling the nomadic desktop software?

  What I want to know is: when you connect your HARD drive is recognized properly and listed in Windows Explorer?
  Can list you all the commands and data using Windows Explorer?

  You have the same problem with HARD drive with different laptops and desktop computers?

• Configuration of USB 2 external 500 GB USB hard drive problems

  Hello gentlemen.

  I recently acquired a disk hard external 500 GB USB part number PX1269E - 1 50.
  I have some problems with the configuration of USB 2.0 in windows XP. When I connect it to a usb 2.0 port, I get the message "USB HDD high speed plugged into a hub non-hi-speed usb", and the unit remains low-speed (12 Mbps) USB. (I checked the port with an another usb 2.0 device and the port works correctly in usb 2.0 mode).
  I checked the PXI1269E - 1 50 in other PCs and I have same results. I can't make it work in USB 2.0 mode. I also have some problems with the virtual CD that is always present when you insert and mount partition. There is a way to remove it?

  I only use the hard drive for data backup every day, and I don't want to use any other drive letters in my system.

  The main PC is an ASUS P4P800-E deluxe with windows XP SP2 fully implemented to update and build in the USB 2.0 controller intel.

  Best regards

  DA P

  I have connected the 500 GB HDD (PX1269E - 1 50) to my Satellite M40 and it works fine. It works with USB 2.0.
  Guys, I think there is something wrong with the controller software or the registry is damaged. Maybe an update is necessary.

  PS: I have not installed the additional software on the supplied CD. The operating system automatically acknowledged.

  @parabolix: using SP1. Try to install whole MS and SP2 updates.