Y560 - problems when running games
Hello world
I bought the Y560 about a year and half ago and I was a proud owner since.
A few days ago I formatted drives, then reinstalled Windows and since I have problems executing Battlefield 3.
The problem is this: after a few minutes of play, the screen freezes and I can't hear a sound of "grrrrrrrrrrr" on the speakers. I can not give any command keyboard and can only force - turn off the laptop.
I had no problems to run the game before you reinstall Windows, so I guess that the problem lies in a driver conflict, but how do I know which drivers are the cause?
Anyone have any ideas on how to solve this problem?
Thank you very much
Vyksa
Problem solved! It turned out that the problem was with the game.
Thanks to you all.
Tags: Lenovo Notebooks
Similar Questions
-
BSOD when running games and windows experience index
Plug-
AMD phenom 2 x 6
2 GB ram EVM
local power 450w
card Gigabyte mother
synergy gta 610 2 GB NVIDIA Edition
I get bsod when running WEI and games
I have no idea why its happening
using archer gamma deeepcool for cooling the processor and have a firm of 80 mm fan
Minidump files - http://1drv.ms/1wD3qeZ (OneDrive)
Help, please
CA
Memtest for the utility of manufacturers of RAM and HD, and CHKDSK for HD. You did everything
These accidents were related to the corruption of memory (probably caused by a driver).Please run these tests to check your memory and find which driver is causing the problem.
If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.
1-Driver Verifier (for full instructions, see our wiki here)
If the auditor does not have the issue we move to it.2-Memtest. (You can learn more about running memtest here)
If you cannot start after you have enabled the auditor reboot in safe modeIn Vista & win 7 (F8)
Co-written by JMH3143.
CHKDSK /R
CHKDSK WARNING: while running chkdsk on the drive if bad sectors are found all the data available in this area could be lost so as always back up your data.
Run CHKDSK /R from a high command (run as administrator).
Do this for each hard drive on your system.
When he tells you, he cannot do at the moment – and ask you if you do not want to do it at the next reset - answer Y (for Yes) and press ENTER.Then restart and let the test to run.
It may take some time for him to run, but keep an occasional eye on it to see if it generates errors.
http://www.howtogeek.com/HOWTO/Windows-Vista/Guide-to-using-check-disk-in-Windows-Vista/See "CHKDSK LogFile' below to verify the test results.
CHKDSK LogFile:
Click Start and type "eventvwr.msc" (without the quotes) and press enter
Expand the topic the Windows logs, and then select the Application log file entry.
Double-click the Source column heading.
Scroll down the list until you find the entrance to Chkdsk (wininit for Win7) (winlogon for XP).
Copy / paste the results in your next post. -
I m get problem when running IE, Chrome or firefox
Signature of the problem:Problem event name: APPCRASHApplication name: rundll32.exeApplication version: 6.0.6000.16386Application timestamp: 4549b0e1Fault Module name: sprote ~ 1.dllFault Module Version: 0.0.0.0Timestamp of Module error: 50212e17Exception code: c0000005Exception offset: 00079aedThe system version: 6.0.6002.2.2.0.768.3Locale ID: 16393Additional information 1 c: 649More information 2: 2d993315539d1b4488dfdd4c434824123 more information: bde9Additional information 4: e8c962f1cadf8af02e768e3862dcb56cRead our privacy statement:http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409Signature of the problem:Problem event name: APPCRASHApplication name: iexplore.exeApplication version: 9.0.8112.16450Application timestamp: 503723f6Fault Module name: ntdll.dllFault Module Version: 6.0.6002.18541Timestamp of Module error: 4ec3e3d5Exception code: c0000005Exception offset: 00039487The system version: 6.0.6002.2.2.0.768.3Locale ID: 16393Additional information 1: c453More information 2: abcc8f7853b48d9807d6d51eb1fa5df9Additional information 3: c453Additional information 4: abcc8f7853b48d9807d6d51eb1fa5df9Read our privacy statement:http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409Signature of the problem:Problem event name: BEXApplication name: chrome.exeApplication version: 21.0.1180.89Application timestamp: 503ebf10Fault Module name: StackHash_2d77Fault Module Version: 0.0.0.0Fault Module Timestamp: 00000000Exception offset: 2028ad6bException code: c0000005Exception data: 00000008The system version: 6.0.6002.2.2.0.768.3Locale ID: 16393Additional information 1 / 2d 77More information 2: 0f87f8924e80c4cc111b410bf65df663Information has additional 3: 408Additional information 4: a747d84ca122d3999f6adb84ba0cb3d8Read our privacy statement:http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409These are the messages of problem I m get... Please help me what I have to do...Thank youHi Raja DSP,
1. what version of IE are you using?
2 did you do changes on the computer before the show?
Follow the suggestions below for a possible patch with Internet Explorer:
Method 1: I suggest you to run the fix - it and check if the problem still persists.
Troubleshoot Internet Explorer to IE quick, safe and stable
http://support.Microsoft.com/mats/ie_performance_and_safety/
Method 2: If the method above is not enough you can follow the steps in the article mentioned below and check.
Tips for solving problems when Internet Explorer hangs or stops working
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-Internet-Explorer
Warning: Please note that the reset Internet Explorer (IE) resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.
If you have problems with Google Chrome and Mozilla Firefox, you see the following link for their respective forums:
Google Chrome
http://www.Google.com/support/chrome/
Mozilla Firefox
http://support.Mozilla.com/en-us/home
Let us know if that helps.
-
Problem when running server SOA
Hi, I'm looking for from the SOA server. I started successfully to Server Admin, but I'm having problems when starting Server SOA. When I'm doing that I get many errors, follow three last lines in the console:
12 characters do not match "Expressions of folklore <>" expected "" "
TForm is running and is accepting applications
12 characters do not match "Expressions of folklore <>" expected "" "
When I am trying to start SOA server administration console (settings soa_server1-> control-> check soa_server1-> Start/Stop, then click Start) I get: string received certificate of localhost127.0.0.1 - has no control of verification of hostname. Pawe certificate?-Komputer but check should localhost
Could you help me? If I'm going to write more information.
Thanks in advance
Edited by: 948093 2012-07-23 06:07Hello
It seems that when you call after a command.
startManagedWebLogic soa_server1 'http://127.0.0.1:7001 '.
try this way.
soa_server1 startManagedWebLogic.sh T3: / /
: Make sure you gave Admin Server port or not.
Check your config file to check the port and IP address or correct.
Kind regards
Kal -
Faced with problems when running CPC and CPA Imort commands
Hello
I am facing problems when executing the commnads CPP and CPA from command line to import a file of CPA. I followed a Blog through "b2bGurus", but the third step is not clear. As for what should be OK step 3.
It will be a great help if someone can explain as well as the exact command to texts needs.
I'll also send the link I followed orders "http://www.b2bgurus.com/2008/11/cppcpa-feature-in-ebms.html".
In this bolg followed the steps as "how to the PRC and the import of the CPA."
Kindly help as this is urgent.
Thank you and best regards,
Kunal BanerjeeHi Kunal,
Its a typing mistake, please try
Of $ORACLE_HOME/ip/tutorial and run below command
Java oracle.tip.adapter.b2b.utility.EBMSUtility cppcpa.propertiesConcerning
Nandagopal.S -
Disappearing mouse pointer when running games in Win7
The mouse pointer disappears when you run one of quite a few games under Win7 64-bit. I tried the obvious solutions of updated all drivers and Windows in the classic Windows theme (i.e. Non-Aero, Windows based), but no use! My rig is the following: Core I5; NVIDIA 460 (1 GB); Samsung 24 "True HD LCD display; Microsoft Sidewinder mouse; 16Gb 1333 Mhz RAM. I'm running my screen at a resolution of 1920 x 1080, but even tried lower resolutions with no joy at all. The text of the command / blocks in games still light up if after that manyu attempts you can accidentally an overview of the text, but still no pointer!
SiSoftware Sandra reports the following about the applicable material (sorry for this long list: I thought that it might help to identify my problem)!
Video adapter
Display: \\.\DISPLAY1
Compatible VGA: No.
Official name: NVIDIA GeForce GTX 460
Hardware ID: PCI\VEN_10DE & DEV_0E22 & SUBSYS_086510DE & REV_A1
OEM device name: nVidia 0E22h
Device name: nVidia 0E22hChipset
Model: NVC4
Revision: A1
Speed: 810 MHz
Shader speed: 810 MHz
Advanced processing performance (PPP): 90.72GFLOPS
Adjusted Peak Performance (APP): 81.65WG
Unified shaders: Unity (s. 56)Logic/Chipset memory banks
Total memory: 1 TBBus
Type: PCIe
Version: 2.00
Width: x 16 / x 16
Speed: 5Gbps / 5Gbps
Maximum bandwidth of the Bus: 7.81 GB/sVideo BIOS
Manufacturing date: July 6, 2010
Version: 70.04.13.00.01System i2c controller 1
Model: GeForce GTX 460 DDC17
Version: 0.A1Direct3D 11 devices
Interface version: 11.00
CS - Compute Shader Support: Yes
DP - Double floating-point Support: Yes
Model: NVIDIA GeForce GTX 460
Physical memory: 1 GB
Texture memory: 3 GBDirect3D 10 devices
Interface version: 10.01
Library version: 8.17.12.6099
Model: NVIDIA GeForce GTX 460
Physical memory: 1 GB
Texture memory: 3 GBDirect3D 9 devices
Interface version: 9.00
Model: NVIDIA GeForce GTX 460
Video driver: nvd3dumx.dll
Library version: 8.17.12.6099
Has 3D hardware acceleration: Yes
Hardware Transform & light: Yes
Heads: 1
Pixel Shaders Version: 3.00
Vertex Shaders Version: 3.00Accelerated video decoders
MPEG2 IDCT: Yes
MPEG2 VLD: Yes
VC1 - D (VC1 VLD): Yes
VC1 - C (VC1 IDCT): Yes
WMV9-C (WMV9 IDCT): Yes
{32FCFE3F-DE46-4A49-861B-AC71110649D5}: Yes
H264-E (H264 VLD NoFGT): Yes
{9947EC6F-689B-11DC-A320-0019DBBC4184}: Yes
{B194EB52-19A0-41F0-B754-CC244AC1CB20}: YesAccelerated video processors
Pixel Adaptive device: Yes
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Yes
Progressive device: Yes
Bob device: Yes
Software device: YesVideo driver
Wait for the Windows Version: 4.00
Active idle screen: 5 minute (s)
Low-power Active economy: No.
Power off to Active record: No.Mode
Mode: 1920 x 1080 16 + TrueColour (32 bit)
Refresh rate: 60 Hz
Virtual Office dimensions: 1920 x 1080Characteristics of the device Mode
Physical medium width: 677 mm / 27 in
Physical medium height: 381 mm / 15 in
Recommended screen size: 35 in
Maximum resolution: 144 x 144 dpi
Bits of color/aircraft: 32 bits / 1 bit
Brushes: 4294967295
Pens: 4294967295
Colours/shades: 4294967295
Pixel width/height/diagonal: 36 / 36 / 51Cutting capacity
Can cut out the Rectangle: Yes
Can cut output in the region: No.Matrix functions
Takes care of the bands: No.
Supports more than 64 KB of fonts: Yes
Can transfer bitmap images: Yes
Supports Bitmaps more than 64 k: Yes
Supports device Bitmaps: No.
Supports the DIB files: Yes
DIBs on the Surface of the device: Yes
Flood fills: Yes
Supports Windows 2.x: Yes
Stretch/compress Bitmaps: Yes
Stretch/compress files DIB: Yes
Supports the scaling: No.
Palette-based device: No.
Saves the Bitmap locally: No.Capabilities of curve
Can draw circles: Yes
Can draw Ellipses: Yes
Can draw Pie wedges: Yes
Can draw chord Arcs: Yes
Can draw wide borders: Yes
Can draw borders style: Yes
Can draw wide borders, style: Yes
Can draw rounded Rectangles: Yes
Can draw interiors: YesCapacity of line
Can draw polylines: Yes
Can draw lines of style: Yes
Can draw a large line: Yes
Can draw lines of broad, style: Yes
Can draw markers: Yes
Can draw Polymarkers: Yes
Can draw interiors: YesVideo settings improved
Animation effects activated: Yes
Full Drag Windows active: Yes
Font smoothing enabled: Yes
Active high contrast: noPerformance Tips
2221 Tip: The driver is not certified.
Tip 319: At least 75 Hz refresh rate is recommended. Increase it if possible.
Tip 2: Double click on advanced or press ENTER, while a tip is selected for more information on the tip.Have you tried to go to:
Tab Start-> Control Panel-> mouse-> the pointer Options
and uncheck the box for "hide the pointer during the strike"?
All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.
-
Problem when running of several blocks of entire function
Hello
I'm building a great system/function using LabVIEW. Therefore, to practice and make look it tidy, I create a VI of blocks to separate and combine certain functions. But, my problem is when I did, the simulation seems to work really slow and the results are different compared to when I had the whole function/system in a single block.
For your information, every VI blocks that I created has a loop control and simulation. When I have all interconnected, I put them all in another loop control and simulation, because some functions that I use to connect them together could not be used without the loop.
Wondering if having a loop control and simulation in every block contributes effectively to this problems as each loop will run depends on the number of time that I put in the loop.
If it doesn't matter which method to avoid this problem happen? My system/function looks terribly messy and it will be difficult for me to present no later than at the end of my project.
Thank you.
Hello
I think what you are trying to achieve is to use simulation subsystem functionality. This allows the functions to execute outside a loop of simulation so that you can create a Subvi. After selecting the functions in your simulation loop you would like to be in a Subvi, select Edit» create Simulation subsystem. Let me know if that helps!
Also, here is some information for this: http://zone.ni.com/reference/en-XX/help/371894E-01/lvsimhowto/sim_h_subsyssa/
-Zach
-
Display in windows 7 when running game "age of empire" is not good
Operating system windows Ultimate
Tried to run the game in different resolution.
Always the same questionTried running in Admin account.
Facing the same question.Tried to reinstall the game.
Always the same question.Tried to run the game on XP/Vista compatibility mode.
Always the same question.Things of the team solve its own it will probably keep in mind resolution next time there is problem
-
Bex problem when running the Illusion of power
I installed a graphics program called Illusion of power and when it runs I get the problem "has stopped working", with the following report:
Signature of the problem:
Problem event name: BEX
Application name: power Illusion DEMO.exe
Application version: 1.97.0.0
Application timestamp: 466838e8
Fault Module name: StackHash_e98d
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception offset: 00000000
Exception code: c0000005
Exception data: 00000008
OS version: 6.1.7601.2.1.0.256.1
Locale ID: 2057
Additional information 1: e98d
More information 2: e98dfca8bcf81bc1740adb135579ad53
3 more information: 6eab
Additional information 4: 6eabdd9e0dc94904be3b39a1c0583635This is the full version, but I also tried installing their demo version and still get the same error.
I also tried running it in a virtual machine under Windows XP on the same computer and works very well there.
I have an i7 920, 16 GB of RAM, NVidia GTX470, Windows 7 Ultimate 64-bit.
I'd appreciate any help to solve the problem or idea on what exactly is causing this problem.
Hello
I'm offering please contact the manufacturer of the software on this problem.
There might be some particular software chance is not compatible with Windows 7.
-
Problem when running Quickstart FunctionExectution
HelloI am able to run the quickstartFunctionExecution successfully using two different machines virtual Java but I don't understand two things:
1. we started not locators, but also the cacheserver from the command prompt, is Don t it is mandatory to do?
2 example says "* this is the peer FunctionExecutionPeer2 connects to the execution of the function."
* This peer performs the function execution request and returns the results to
* the applicant counterpart.
But I do not understand where Peer1.java we put values to work and OR return the result, what I see is a simple recording function that's all. Only in the peer2 put us the values of the region as well as the execution and get the result using ResultCollector. Please clarify?
Due to which I changed the code a little and try to run the same but facing problems, and they are:
Approach We open the same project in two eclipses and modified the peer1.java, peer2.java as below and kept the XML as it is: in the quick start example
When I run the FEPeer1 into an eclipse, it gives me results (while the data for the region), but when I see an another eclipse, it gives the error:
Questions:
It gives NPE because the size of the rc's 2 (despite the addition of 20 records int FEPeer1)? Second thing, it is the list is seen size 2, but the data is null, why so?
Please help me as soon as POSSIBLE, because it will be easy to buy according to my POC
Thank you
Aqamah
Hello
(1) it is filtering the results to data from sentinel/marker that represents the end of the result set. You need something like that if the function has hasResult() set to true for the function and peers may not return any data. You must mark the end of the result set with a call to lastResult() which should return something (in this case dummy data which can be removed during the treatment). If you always know that the data will be returned, then this can be managed differently, especially in cases where you use a filter where the function will be carried out to operate on members with known keys. There are two Boolean values returned in a normal use without filter, as there are two servers and each server are collected in a single outcome, before being finally available for the consumer.
(2) this is an open discussion forum and you do not need to close a question and so you should just start a new thread or question. It is useful to other people who have read the message board if you find an answer or a useful discussion to add this so that it is easier for others to find useful information between questions.
-
Help! Problem when running CF under a default service account
I am running ColdFusion 9 with IIS 7 on Windows Server 2008.
The CF application service runs under a domain request account rather than the local default.
The problem is when you are so defective models keep an indefinitely open active query.
Is it a permission setting, I may be missing to resolve this problem?
Thanks for any help anyone can provide.
Charlie, thank you very much for your answer.
We had only to read/write permissions for the account on the coldfusion9 directory. After changing to full control, the problem has been resolved. Charlie, thank you very much for your answer.
-
Access to variables in Captivate swf load problem when run locally
I am charge 3 Captivate SWF in a Flash drive custom. Here is pseudocode that arrives just at the point:
var cp1_mc:MovieClip = this.createEmptyMovieClip ("cp1_mc", 1);
cp1_mc.loadMovie ("captivate1.swf");
[wait (cp1_mc.rdcmndGotoSlide! = undefined) through setInterval]
cp1_mc.rdcmndGotoSlide IS
var cp2_mc:MovieClip = this.createEmptyMovieClip ("cp2_mc", 2);
cp2_mc.loadMovie ("captivate2.swf");
[wait (cp2_mc.rdcmndGotoSlide! = undefined) through setInterval]
cp2_mc.rdcmndGotoSlide REST UNDEFINED INDEFINITELY
The thing is, this problem does not occur when you test the movie in Flash, or happens when the player.swf is run on a server. This happens when the player.swf plays locally in an html page.
Can someone give me a clue as to what is happening? My best guess is that it has something to do with Flash Player Security, because it happens that locally in a browser, but I do not understand what is happening.It turns out that it was a Flash Player security issue and I had to put the security settings to "always trust" for my local directory.
-
Screen shrinks to half size when running games
Whenever my son trying to play games on his new laptop, the screen is reduced to half size. Its surrounded by a black border that is not part of the screen.
At first I thought that it was opening up in a small window but its actually shrink the entire desktop that the cursor will not leave the window and go to the black border.
Normal, Windows Vista, windows opens very well and are full screen, it just seems to be when it is installing games.
Can anyone help?
In the parameter sets go to resolution and change the resolution of your laptop (if you need help finding it, give me the model number of the laptop) might be the most likely cause. Probabbly the game is played in a 4:3 resolution.
-
Problem when running iterative morphology
Hi all
I'm writing a VI that takes an input image and uses the morphological operations until the stop condition is met (the condition is linked with the resulting image). I want to retain the images obtained at each iteration. I tried to do with records to offset and creting a table of the image. Unfortunately, none of these reviews has worked... For some reason, the morphological operation affect my input image, so that all the images stored in the table show the result of the latest iteration. I tried to create a copy of the image in each iteration without success. I created a simplified example to illustrate the problem. I use a loop for whiich makes expansion n to an image of input text. I expect a result different dilated images stored in the output array. Anyone know what could be the reason for my problem?
Thanks in advance.
PS: I know I could specify the number of iterations that runs from the morphology of VI, but I do not know this number in advance. I need to apply morphological operations until meeting a condition evaluated in the loop. The idea is to transmit the resulting image in a registry to offset and evaluate each dilated image until a given condition is met.
Make sure that you create a new image with a unique name for each step you want to memorize. Use the new image that the destination image.
If you use an image with the same name, it is the same image and is crushed.
Bruce
-
problem when running on the device...
Hey everybody,
I recently finished writing an application, and I installed it on Bold 9700 device. It works very well. However, as the
I navigate through the screens through buttons, a menu list opens for each screen. Its boring as each screen appears with a list of the menu.
Is there a way to prevent this arise?
Show this message to check if this is the same problem.
Maybe you are looking for
-
I just installed Firefox 31.0. I received the message that Norton Toolbar 2014.7.2.6 is incompatible. My Norton Identity Safe does not work. I tried the corrections indicated for older versions of Firefox, but they do not work.
-
It is possible to buy an iphone using paypal credit?
I just want to know if on the final payment, I can use my paypal account/credit to buy a phone. I'm moving from android. Thank you very much.
-
photo book - move the text box
I'm building my first photo book project - I was able to choose a theme, add images, open 'options', type in the text box, edit the fonts and size and move the text up and down the text box - BUT I couldn't resize the text box or move it to the lowes
-
Maximize the continuous digital data recording rate
I'm trying to record digital data clocked outside large amounts quickly. The data is only for post-processing. What is the best way to get data from the port on the hard drive at the fastest possible pace? I connect using a PCIe 6537 B. I log on 4
-
image of first page to the browser
Hello My AppendFrontPage.VI uses the function in addition to the report cover page to get the other VI cover page. AppendFrontPage.VI creates the new HTML file in a report, then it adds two hyperlinks in the report. The image of the first page is add