el capitan usb boot disk

Similar Questions

• Dashboard SSD 1.4.2 has no option to create the USB boot disk

  IM using the Dashboard SSD 1.4.2 and im wanting to clean up a Sandisk SSD Plus 120 GB SSD.

  However when I click on the page of disinfection, it does give me not an option to create the startup disk USB (despite what the documentation says)?

  Im running Windows Pro 64-bit 10, if that helps.

  Thanks much :))

  I installed the Dashboard of SSD 1.4.2 on some other PC with Windows 7 Enterprise 32-bit and 64-bit.

  and the option to create USB boot disk displays and works perfectly!

• Creating a USB boot disk will affect my HARD drive

  OK so I have Windows Vista and I did a Windows 7 boot disk on my USB key and before I booted from it, I want to know if he's going to do a clean install / affect the Windows Vista on my HARD drive or will only affect the USB key.

  You can install Windows 7 from a USB /Thumb drive, but Windows 7 can not boot from a USB key.

  You try to install Windows 7?

  J W Stuart: http://www.pagestart.com

• Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

• Creating a USB boot for el capitan

  Hello together,

  my macbook pro does´t work longer. The monitor during startup is gray and it does´t boot correctly. I wanted to create a USB boot with my mac and followed the instructions on the apple site. I wrote it in the terminal:

  sudo/Applications/Install\ OS\ X\ El\ Capitan.app/Contents/Resources/createinstallmedia--volume of 16 Volumes/STICKI-applicationpath/Applications/Install\ OS\ El\ Capitan.app X\

  STICKI 16 is the name of the usb key. Then I got the comment, I should check my device twice. It is possible, I have stop my Mac. I have Don t need of such a catastrophe. It s worse enough, that my macbook pro pro is down.

  Now I m uncertained.

  Here my question: do you have someone proceeded as above written successfully? Is there someone who has a good advice for me in this case?

  Sorry for my bad English, I left school 40 years ago.

  Thank´s for the good answers and greetings form Germany.

  Ralf Jacob

  These are the instructions I used:

  http://osxdaily.com/2015/09/30/create-OS-x-El-Capitan-boot-install-drive/

  Ciao.

• make a boot disk

  I'm doing a startup disk, a boot disk.  I have several disks usb, 1, 2, 3 TB, or I could use a flash drive, if he stands on a 32 GB flash drive, that is.  I suppose that it wouldn't be as people online sell everywhere to help people who find it difficult to install el crapitan.  Many of them must be as one of the amazon sellers showed 4000 available: 39 left.  Ouch.  I can't el crapitan to install to save my life.  It crashes, never works.  The importance of the support of apple is suggesting that I say 'Yes' when I start, as I have to "accept" the agreement from apple before, even though I told her is not the problem, she sent me a book of instruction page three on how to start el crapitan and to proceed with the installation, you have to say yes, and you will need to acceptt their agreement.  Yes, I did.  no problem with this part.  but it's that the things she and the two girls before and both were subsequently in the same boat.  Mr President, let me send you instructions on how to download it.  "No, I say, I did.  Do you really think someone is struggling to push a button that says "download?  Obviously, Yes. because she sent me instructions, once again, no joke, on how to push the button so he can 'download '.  Complete with how to do it with your finger and how if you have a plug in the mouse, with a separate section if you have a wireless mouse.  Hell me silly.

  O.K. HELP!  El CRAPITAN won't complete the upgrade process.  Please tell me if it takes normally 8 to 12 hours on your systems.  I guess he was hanged and killed the process.  rebooted, retried... same thing.  anything after 12 hours or more.  Yes, I used the pad on my Apple Macbook Air 11 '', i7, 4 GB ram, 250 GB SSD.  I do not use a wireless mouse.  I have not used a wireless mouse.  I did no harm to press download, and after I did, it succeeded because it was changed to read "DOWNLOAD"... "If there are employees of apple here who have not... so much worse.  If you work for Apple, leave, just freaking leave I have no more time or patience for you.  Just trust me the O.K. FREAKING the COMPLETE DOWNLOAD.  O.K.?  Because it gives an error message when I tried to install from the same disk.  Then I tried to install it from a second disc, a key USB WD 3 TB.  Seems to hang.  (Tell me whether I should WAIT WAIT 15 HOURS OR MORE for the thing to check.)  Anyway, it does not work.  So I found a TON of entries, some are already selling thousands of them, for small usb thumb drives flash of various sizes, called the STARTUP disk, so...

  I guess el Crapitan must be installed on a PARTITION AMORCABLE where in the CAR.  Something that it would have been so freaking sweet if they would have SAID THAT SOMEWHERE some TIME no matter WHEN IN THE DESCRIPTION OF THE PACKAGE ON THEIR SITE.  OK, so I think I ned a diskette formatted in some way.  Me color cheap, stupid, whatever.  But rather than buy on online at Amazon, I thought how hard can it be?  I can do it.  Big mistake.  Create a disc a disc of starting, or bootable used to be in the old days an easy as pie thing...

  However the Apple support site, helps him terminal programs, man pages diskutil, the program Apple accessories disk utility supplies, NOT HAVING ANY HELP DRIVE of FILES THAT BOOK REFERENCE, START UP DISK or any combination of the same, you know... How can you, how can you do a... whatever.  nothing. isn't there.  And here, in the consumer help pages.  No messages that are either.

  It's not rocket science.  It can be done.  How to make a boot disk?  How to format a disk a bootable floppy.  or a book drive, no matter what.

  And if y ' All are Apple support staff, and if you tell me that I pressed the wrong download button or I pulled the single button in the wrong order... I take my mac to a shooting range and shooting it be shot to pieces and displaying it on iTunes.  And never, never, ever, buy a mac or an apple anything.  , so, this whole experience has soured me I could never do that either.

  What do you know?

  <Create a bootable OS x - Apple support Installer>

  <http://osxdaily.com/2015/09/30/create-os-x-el-capitan-boot-install-drive/>

• Start of the external (USB) HARD disk Windows

  Dear apple supports,

  I have install Windows 10 external HARD disk and connect with my Mac by USB. When I select the system startup on boot disk is windows 10. I got a message "you cannot change the diskette on the selected disk. The bless tool was unable to put the current startup disk. »

  How can I start windows from disk external HARD on my Mac (MacBook Pro (retina, 13-inch, early 2015), OS X EL Capitan v10.11.1)

  There are two ways to install Windows on your MacBook Pro. You can use the Boot Camp Assistant, located here details: http://www.apple.com/support/bootcamp/ or you can use a virtual machine, Parallels, Fusion or VirtualBox. Details are found on their respective sites.

• Mac 27 inch cant find HD boot disk won't boot

  My imac starts with chime bar and apple but takes almost a day to get to the user login page and when that happens it goes no further. I can't find my HD drive icon start-up and im not sure if I still have el capitan os x 10.0 do not know what is happening? I have the 4 TB WD dou upward by car and do not want to lose all my logic projects so I guess I need boot disk and os x help if someone can thanks yall

  Your machine likely has a failed hard drive or some other problem. Please, take it to your local Apple Store or the service provider authorized Apple to be looked at.

• no boot found device, insert the boot disk and press any key

  Hello, recently tried to install Windows 10 through the Assistant Boot Camp, with the help of a DVD I bought windows. But I get an error saying "no devices found Boot insert boot disk and press a key" I tried to read and do all the patches, all offer and yet no results. Any suggestions or corrections us would be great!

  MacBook Pro mid 2012

  -i7

  Evo - Samsung 500GB SSD

  -Ram 16

  -Latest version of Mac OS x

  -L' use of 64 GB PNY flash drive

  Your Mac 2012 supported creating a USB Installer to help BC Assistant. Do not use a DVD, a USB Flash drive. Your USB drive must be a USB2 flash drive, if you choose the USB mode and you will need a Windows ISO.

  See also create an ISO image for Windows - Apple Support installation media Boot Camp .

• HP Laserjet P1102 by USB "the disk you inserted is not readable by this computer.

  My HP Laserjet P1102 used to work properly with OS X10.10. Then he started to say (now I'm on osx 10.11.4) "the disk you inserted is not readable by this computer" whenever I have the lit, but the printer still work. What should I do?

  I tried with this solution HP Laserjet P1102w by USB "the disk you inserted is not readable by this computer ' Ec Capitan osx's option"repair disk permissions ".

  I can't say if it will work, and it may even be harmful, possibly to the point of making your mac unbootable, so be careful - all the least have a clone of your system disk. If you start using the internet (Command-Option-R) recovery mode, and if your mac is a model that existed prior to El Capitan, it could be that the disk utility you get in this collection is the old version, including the order of repair permissions.

• 23 - k027c: ERROR: no boot disk was detected or drive failed

  Hello!

  My computer

  HP Envy tilt 23-k027c TouchSmart all-in-One desktop PC (energy star)

  These latest OS Windows 10 (update of Windows 8, which was preinstalled on the computer at the time of the purchase in December 2013)

  Intel (r) Core (TM) 15-457OT CPU @ 2.90 GHz

  Processor speed 2900 MHz

  A few days ago it started showing blue screens of death with a PAGE_FAULT_in_NONPAGED_AREA note all other hours, or sometimes 3 times per hour.

  I went through all the troubleshooting process, finished with a bluescreen debugging possible analysis demonstrating that the ntoscrnl.exe driver might cause the blue screen issue.  And on the morning of the next day my computer greated me with a black screen with an ERROR: no boot disk was detected or drive failed.

  I can still get into the BIOS by pressing ESC at the present time of HP sign appear early attempts to restart.

  BIOS indicates that the hard disk is detected (yay!), so it is not the source of the problem.

  Memory and disk test went well passed, PASSED tests successfully.

  Pushing ' restore the original and exit "in the bios does not help.

  Nothing else works. Only these two ESC and F10 keys.

  How can I fix the system?

  I don't have a HP with PC Restore disc when I bought it. Site Web of HP didn't kits of restoration for the moment.

  What to do?

  SOS help, please!

  It is the computer that I use for work and personal use. There are gigabytes of photos of my family, as well, who desperately, I don't want to lose...

  I'll be super thankful for all reasonable advice and direct instructions!

  The ' ERROR: no boot disk was detected or drive failed. "  May be a simple solution to redo the botmanager file.  This normally requires a bootable DVD with the repair function or a USD bootable with windows and repair function.  Windows 10 is installed, this would be my choice getting either the drive or the USB key.  HERE IS THE MEDIA tool of M$.  Make the work of another PC, DVD or USB and then - on PC - start problem that media and choose repair when loading of the POPup screen.  DO NOT install.  If you install it, it will eliminate your data.

  BTW: 10 Windows is installed, the HP recovery disk will return the PC to Windows 8.

• Satellite Pro A200: Recovery using a ghost network boot disk

  Hi all

  Need to ghost several satellite pro a200 machines using a ghost network boot disk. When I use disk ghost provided by the ghost boot Wizard and no boot on PC back I get the message 'No Fast Ethernet PCI Adapter Found!' Serious internal error! (hardware works fine under XP/Vista)

  I tried to boot from CD, Mem Stick and USB floppy with the drivers of toshiba and realtek without success, research on google seem to point to there needing to be a driver to interface with the cardbus / PCMCIA adapter - if it IS the case can anyone shed light on the fate of a pilot and how I could continue on this?

  Thank you very much
  GAV Shakespeare.

  Thanks for the clarification best regards

• Qosmio F10: USB-Boot necessary.

  Hi all

  I have a Toshiba Qosmio F10 series.
  I need the ability to boot from a usb key.

  As toshiba BIOS does not offer a USB boot option, I would like to ask if anyone knows a
  how it will be possible.

  Thanks in advance to all!

  Hello

  Unfortunately, this is not possible. You cannot boot from the Flash DRIVE or USB HDD.
  You can start only from:
  STRANGE machines FDD USB, HARD primary disk, Network (LAN)

  concerning

• USB boot option just don't not using uefi

  I am trying to install windows 7 64 bit. my hard disk partition type is TPG. But Usb boot option does not come in UEFI boot mode.

  If I choose the start for Legecy support option, then the usb option comes, but I want to install win 7 64 bit in the uefi.

  I have already created the USB bootable in uefi gpt mode by using diskpart as mentioned in other topics. Also tried with rufus.

  BIOS settings:

  G50 Lenovo 70

  Safe boot: disabled

  Start mode: uefi

  Quick start: disabled

  Boot USB: enabled

  Operating system optimized defults: other os.

  Format hard drive: TPG

  When I boot, only option "EFI PXE Network" comes. Not boot from usb option

  Help, please

  Thank you

  
  

• No boot device - insert boot disk and press any key

  Hello

  I was with boot camp to install 10 Windows from a usb key. The first problem I encountered was an error message stating that Windows supports software could not be downloaded on my flash drive. I read that the necessary drivers could be installed later so I unchecked the box. The part of the installation, then training camp as it should (create a partition etc.)

  However, when the Mac went to restart and (probably) to start the program installation of Windows, the error message "No boot device - insert boot disk and press any key" displayed. My problem is the wireless keyboard does not respond and the light on this issue seems to suggest that it is not connected. My guess is that the drivers needed, such as Bluetooth are not there.

  I'd be happy enough to restart OS x and forget all about Windows, but I can't see how to get around this problem?

  A wired keyboard could work?

  any help is appreciated!

  Thanks in advance

  Max.

  A wired keyboard and mouse will work. If you try to install Windows and tried to download the Windows software on a wireless network, try a wired connection. to rebuild your USB Installer.