Elan Touchpad not working not

Similar Questions

• Satellite M50A - ELAN touchpad stopped working - again!

  Do not forget this recent thread?

  https://Forum.Toshiba.EU/showthread...topped-working

  Well guess what that my mouse and touch pad stopped working again today, this time during a Windows Update (and not after) - and guess what... the 'momentum - other hardware - MOMENTUM Input Device"was one of the updates, as well as the last time.

  The good news, for me, anyway, is that this time the problem was temporary. After forcing a restart by a long press on the power button, mouse and touchpad has been restored after finishing installing updates.

  EDIT - just to say that my touchpad customizations for example reverse scroll direction, 3 finger tap to start the browser etc were all lost. Not much, just a nuisance

  And as a follow-up, after you change the registry to restore the functionality to launch my favorite browser with a finger 3 press on (see another thread for reason of why I had to use regedit) I've had intermittent results.

  Now, I realized that the 3 finger 'press' feature seems to have disappeared to be replaced by a '3 fingers' touch. It is not documented that I can see, the registry key names remained the same, but pressing done nothing at all works a 3 persistent finger touch.

• Elan Touchpad problem, after Windows 8.1 unsuccessfully

  I recently updated to Windows 8.1 and noticed that my features Elan Touchpad not working at startup and the dynamic icon was missing from the toolbar.  I went into the settings 'mouse' in the control panel and noticed that the driver was still charged.  More interesting still, after hitting OK, the dynamic icon appears and gestures worked.

  Of course, I tried to update the drivers of the momentum, but after that, I noticed that the gestures were different, and specifically, missing four fingers gestures to switch in between the desktop and the start menu.  For this reason, I uninstalled the driver and tried to return to the old with four finger gestures.  Any time I tried to install the older driver, however, installation would break and the system would be self-repairing return to the former State of Windows where the characteristics of momentum Touchapd was missing until I loaded the menu of the mouse and click OK.

  Any ideas on how to solve this problem, in addition to placing a shortcut on the desktop to make it easier to load the menu 'mouse' in the control panel?  Is there another available driver where to work the four finger gestures?

  Yes Yes. The updated driver works fine . Thank you for the fast support!

  What I did:

  -TouchPad_ELANTECH_11.6.4.001_W7x64_A.zip uploaded

  -In the Device Manager, under "mice and other pointing devices, right click on" Port of PS/2 ELAN Smart-Pad "choose uninstall. Dialogue in the "confirm device uninstall", box ticked the ' remove the software driver for this device "and press OK. Restart the laptop.

  -Unzip TouchPad_ELANTECH_11.6.4.001_W7x64_A

  -Launch the Setup.exe in TouchPad_Elantech_11.6.4.001_W8x86x64 (which is in TouchPad_ELANTECH_11.6.4.001_W7x64_A)

  -Restart.

  The momentum (dynamic) pointing device icon appears in the system tray as it did before you update windows 8.1.

• G780 keyboard does not work, but ONLY if the Elan Touchpad driver is installed.

  I have a bad surprise today--unlike other manufacturers, which offers one year free tech support, Lenovo does not. $179 for a contract or $89 to cover an isolated incident. Thank you, guys. :-/

  Here's my problem.

  G780, bought last October. Upgrade to Win7 Home Premium Win8 Pro.

  A few days ago the integrated keyboard has stopped working. It works in the BIOS, but when you start in Windows, Windows does not recognize it.

  There is a PS/2 keyboard driver and device keyboard HID that appear in Win8 Device Manager. I guess these are the drivers for the built-in keyboard. If I plug in a USB keyboard, it appears in the device as an additional device keyboard HID Manager.

  By trial and error, I discovered that the keyboard still works fine when the Elan touchpad driver is not installed. The problem with THAT: I can not disable the touchpad unless the driver is installed, and if the touchpad is not disabled, it will screw me up because I accidentally brush my hand against the touchpad while typing.

  I also noticed that sometimes the touchpad in the system tray icon with a WARNING icon overlaid on top of it (you know, the little yellow triangle with exclamation point). I can't understand why, and I can't understand what has changed on my computer that caused the keyboard to stop functioning properly.

  I tried uninstalling the Elan touchpad driver, download the latest driver from support G780 web page and put it back. No luck.

  I make do with a USB keyboard at the moment, but I really need this problem is resolved.

  Thanks in advance.

  So I had uninstalled the drivers of momentum earlier... yesterday I tried to reinstall those supplied with the computer.

  At least the keyboard worked now, but the drivers have not been properly disable the touchpad when I plugged the mouse.

  Then I hit Fn - F6, not really thinking that he would do anything, but it fixed the problem.

  I would have but the pilot would have overridden some setting I put with Fn - F6, but... maybe not.

  Problem solved.

• HP Pavilion - 15-ab045sa: a few gestures of precision Touchpad not working not

  Hello

  I'm new to the forum, so I hope I posted in the right place.

  My product: HP Pavilion Notebook - 15-ab045sa (ENERGY STAR)

  I have all the gestures of touchpad usual work (three stroke of finger etc).  However, the recent to THE introduced a new gesture to switch virtual desktops. I was really looking forward to this update, but this gesture does not work! I tried to reinstall the update with erase everything and it still does not work!

  I don't understand why it does not work as I have a touchpad of accuracy and all other gestures of work except this new! Also even if some gestures of work (for example three finger swipe), I don't think that win 10 recognizes the touchpad of precision like under settings of the mouse and Trackpad, what it does not say that I have a touchpad of precision and so does me no options to change what are the gestures, as it should.

  I have the Synaptics TouchPad of SMBus 19.2.11.38 driver (21/07/2016).

  Would really appreciate your help as I was really looking forward to the new gesture switch virtual desktops.

  Thank you.

  Just got an update via windows update Synaptics update to version 19.3.11.37 - it finally allowed me to have the film 4 finger to switch virtual desktops!

• Equium U400 touchpad not working not

  Laptop repair of my daughter: screen dead, volume control wrote letters to the screen when you use and the touchpad no longer works.

  Replace the screen and the palmrest which included the touchpad, but still can not touchpad to work.
  any suggestions?

  Now, the screen is good, but no idea what to do with control of volume.

  Any help appreciated.

  > Screen is now good, but no idea what to do with control of volume.

  I had a similar problem in my case it was related to dirty sensor.
  I could clean it with a jet of compressed air perhaps it was little dust between the volume wheel and the sensor that knows to clean it worked.

  On the touchpad:
  Well, I put t know what might cause this are sure you that it is not disabled by Fn + F9 key combination? Check the BIOS settings not sure if there is an option for touchpad but many BIOS also contains the power button for touchpad
  Otherwise, it might be possible that you have made some mistakes, while replacement of this part is all the cables connected properly?

• HP Jet 11 - d 010wm: touchpad not working not

  Hello

  I have a HP flow 11. I have upgraded to Windows 10 and had no real problem until I decided to update the drivers (I sent a message that drivers were outdated). I generally don't click on something like that because it causes problems and it was obviously the case.
  After the update, the touchpad stopped working. I tried various fixes, but nothing has worked.
  
  At one point, I went into Add / Remove programs and remove the touchpad Synaptics hoping that, when I rebooted, restart located the touchpad and the driver and reinstall correctly. I was wrong and I think it was a huge mistake on my part. Now I can't get the driver to work I downloaded.
  
  Is it possible that I can get the touchpad to work again. I use a mouse and that works fine but not effective for a laptop.

  Thank you

  Alisonf1

  There are five drivers chipset on hp.com for 11 stream and one is required for the touchpad work, I think it's Intel series IO driver without the support of connected intelligence.  Who install and reboot and see if that fixes it and if not, install the other four.

• Satellite A100 PSAAR: Synaptics touchpad not working not not on Vista Ultimate x 64

  I decided to upgrade my XP 32 bit Vista x 64 Ultimate on my PSAAR A100.
  Operating system works perfectly except one thing - touchpad, which work perfectly under XP, is not answer at all under Vista x 64 (with SP1 of course).

  Worse, it's that my touchpad (Synaptics) is listed in as a work Device Manager correctly. Hmm - I don't remember. Meet your possible suggestions - I tried to reinstall, I tried to use the A200 drivers (since Toshiba does not support drivers for Vista x 64 for line A100) and even had the newer drivers from the Synaptics site. Update Vista even me has new drivers - cool, I admit, but it still does not work, even if Windows does not seem to "know" about any help would be very appreciated :) it...

  PS (optional problem) I also have 2 unknown according to Device Manager devices - since I have no idea what they are, and because I don't think I'm missing something - I simply gave up on top of those - at least for now ;)

  Of course, nobody here the solution for you. :(

  Problem is that this model of laptop is not supported for Vista 64-bit. I don't really know what you can try. Maybe install driver designed for A300?

  I don't really know. You can use an external mouse with success?

• Touchpad not working not not Z580

  Hello.

  First of all, I hope that my post is placed in the right place.

  Since yesterday my notebook computer touchpad (Z580) stopped working after full initialization of Windows 7 (I can use it for a few seconds) so I know it is not a material thing. I've also updated my drivers, still the same problem. And I can still use a USB mouse.

  I searched the internet a solution but without success.

  I have my laptop for about a year and I'm very happy with it.

  Hope someone knows the answer.

  Jeroen.

  Tanks, but since this morning my touchpad started working properly again without doing anything special.
  I don't know what started the problem, I tried many different things without success, I also restarted my laptop several times yesterday, nothing worked.
  But I'm glad its not now.

  Thank you for your support.

  Topic can be closed now.

• Y500 two-finger-tap touchpad not working not

  Hi I bought my Y500 a few happy days with her and there are in general. However, one day the two le deux-doigt-tap (par clic droit) sur le pave tactile - finger - tap (by right-clicking) on the touchpad stopped working. Here is a description.

  Everything else as far as I know, including the two fingers scrolling and the tap of a finger, etc. work well, but the tap two fingers stopped working even though it worked fine for a few days. I have a suspicious as to what caused it, but I'm not entirely sure. In any case, I think that it is probably a bug and probably software. One day I went into 'control panel'-> 'mouse'-> 'device settings'-> 'settings... '. "->"Scrolling"->"two fingers to scroll"->"enable cabotage. I played with the cabotage for awhile and soon off again because I don't really like it. However, that's when I noticed that my tap two fingers stopped working. I have double checked that 'control panel'-> 'mouse'-> 'device settings'-> 'settings... '. "->" by clicking on "->" click two fingers "is set on" secondary click (context menu, drag special) ", but the click two fingers still doesn't work, even after a reboot. I downloaded the latest driver (version 16.2.18.0) and it still doesn't work. I uninstalled the driver and installed it again and it still does not work. Now, I like to use the touchpad, but really hate to live without tap with two fingers for a right-click. Please help me with this, I thank you in anticipation.

  It seems to me a solution, but I don't know exactly why he has solved the problem. It seems that the problem might be that while the Synaptics touchpad device is a PS/2 device, it keeps software interference (of some sort) by being recognized as a SMB (System management bus) device. Which solved the problem for me was to go to 'device manager'-> 'system devices', locate "Synaptics SMB driver", and either disable it or remove it. The two-finger-tap touchpad must begin to work immediately.

• Aspire E1-571 touchpad not working not

  Dear Sir, iam using aspire E1-571 laptop.it is bought on last august.but currently this touchpad not working.iam using usb mouse.please solve my problem quickly.

  Have you tried to turn the touchpad with the function key?

  FN + F7 I think

  A symbol:

• Aspire e15 (e5-511-p9y3) Touchpad not working not not on windows8.1

  Aspire e15 (e5-511-p9y3) Touchpad not working not not on windows8.1, and I can use the cursor with a mouse. I also installed the synaptics/elantech drivers but it does not show scrollbar option in the mouse-> device settings.

  SOLUTION

  So guys after a thorough research and troubleshooting, I found that you must keep the opinion of a few things at installation time:

  Installation mode: UEFI (only) - LEGACY would create problems touchpad.

  After the installation of windows just follow the hierarchy of driver installation

  1 Intel NB_Chipset_M Baytrail-M

  2 Intel i/o driver

  then the rest of the shit.

  Note: after doing all this make sure your touchpad is active > Fn + F7

  Just wanted to if this solution came from an Executive of acer, the world would have been a better place , but in any case this is what the community is for.

  Enjoy everyone

  [private under the leadership of life]

• Pavilion dm1 touchpad not working not

  Pavilion dm1 touchpad not working not not using windows 7 Home Edition.
  In Device Manager, I see that the external USB mouse, witch synaptic touchpad does not work.
  Can someone help me please.
  Did all the updates that are offered by HP

  Hello Terry,

  Thanks for your help but the touchpad seems to be defective.

  I use a usb mouse.

  Kind regards

• Synaptics Touchpad not working not not on HP Pavilion 17 Notbook PC17 e048st

  Hello

  Laptop of I have a PC: HP Pavilion 17 Notbook PC17 e048st

  The touchpad not of not WORKING.

  Error requested on the United Nations Web site, I have deleted the software Synaptics PS / 2

  Touchpad doesn't WORK on HP Pavilion 17 Notbook PC17 e048st

  Thanks for helping me.

  Kind regards

  Hello
  I have a laptop: HP Pavilion 17 Notbook PC17 e048st
  The touchpad does not WORK.
  Asked by mistake on the site of the United Nations, I deleted the software / 2 Synaptics PS
  Work on the touchpad HP Pavilion 17 Notbook PC17 e048st
  Thank you for helping me.
  Kind regards

  Hello cigo,.

  Thanks for posting on the HP Forums!

  I'll try to help you with your mouse problem. To resolve this issue, try the following steps:

  1. go in Manager devices, then mouse and other pointing devices.

  2. right click on the mouse driver and select "Uninstall".

  3. restart the computer. This will force the computer to install a driver based on the detected hardware.

  This should solve the problem. Please let me know the results. Thank you!

  Mario

• Touchpad not working not not in HP ENVY-dv6

  my laptop (HP dv6-nevy 7300ex) computer touchpad not working do not...

  After installing the new version of win 8 touchpad dead...

  I have?

  Thank you!

  Start your laptop and immediately press the ESC key to call the start menu.

  In the start menu, choose F2 for HP PC Diagnostics.

  Choose tests of components, and then choose touchpad to perform the test. post your results here in your thread. If it's a hardware failure, then the trial will notify you of that.

  

  Please ignore the selected system board circles. It is in another troubleshooting session earlier this year. You must choose a mouse for your question.