Elements does not work without a disc in the drive?

Similar Questions

• I recently reinstalled windows xp pro. now my multimedia audio controller does not work. I have reinstall the driver it restarts my computer. I have a hp Pavilion 752n.

  I installed windows and now whenever I try to play a song or anything it says no audio device detected. I go to the control panel and verify it says multimedia audio controller not working do not. so I reinstall yhe driver and my computer restarts during the installation.

  Hello joshuap79,

  Thank you for visiting the Microsoft answers community.

  What drivers are you using?

  There is a topic on HP about the drivers for your model: click here

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows media player does not work when I click on the drive icon in the taskbar

  Player does not respond to an initiation. I have a windows system 7, not sure about the edition of player. Was it somehow been deleted?

  Player does not respond to an initiation. I have a windows system 7, not sure about the edition of player. Was it somehow been deleted?

  Pin this WMP icon in the Task bar by right clicking on it. Now look at WMP in the program, menu-right click and select PIN to the taskbar. This helps.
  I have that it doesn't then try to reset wmp12.

• My TSSTcorp DVD +-RW TS - L632D does not work, error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  And it displays the following message: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». I tried all the tricks troubleshooting to no effect. I uninstalled and reinstalled and look for the updates to install. What should I try next?

  http://support.Microsoft.com/kb/314060

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• Why inspect element does not work?

  I just got the update of Firefox 10. I turned on check in the web developer menu, but by selecting check if this element does not work on anything. What can I do?

  Aaand there is a software update which fixed it. >. >; Sorry, thank you.

• Integration of keyboard shortcut does not work without supervision on T450

  We received some new T450 for our company and I'm putting the shortcut keyboard on it integration tool but it does not work without supervision. I can install it manually with the command-> setup.exe/S/b/m/h, but I need to do for 400 machines with a deployment tool, and here I am stuck.

  I use the latest version of 5.51.001. It works very well for the T540p and more but is not visible for T450.

  Just to be clear, it installs successfully on T450 but does not work, if I push the buttons on the keyboard.

  OK, nevermind guys. I had to do a restart and everything worked.

• Y560 does not work without power

  I have Lenovo a laptop Y560. Couple of months there is overheating and I after that I started to get the message to "consider replacing the battery. Laptop still worked with AC power or without power (although the time of a battery has been reduced).

  After a few weeks, I bought the battery replacement and laptop worked fine for a while but now it does not work without AC power. Battery is 98% charged, but as soon as I disconnect laptop AC adapter just turns off. What could be the problem?

  Paul,

  replacing the battery is maybe defective, if still under warranty, please contact the vendor that you bought.

  A new true Y560 battery is available on Lenovo online store...

  http://shop.Lenovo.com/SEUILibrary/controller/e/Web/LenovoPortal/en_US/catalog.workflow:item.detail?...

  Cheaper Y560 batteries (good and bad) are also available on eBay and Amazon...

  http://www.eBay.com/Sch/i.html?_trksid=p5197.M570.L1313&_nkw=Lenovo+Y560+battery&_sacat=0&_FROM=R40

  http://www.Amazon.com/s/ref=nb_sb_noss_1?URL=search-alias%3Daps&field-keywords=IdeaPad+Y560+battery&...

  Zehn

• Mouse and multimedia keys does not work without the fn key

  Lenovo G500

  model without 20236

  Windows 7 sp1

  the mouse and the multimedia keys does not work without the fn key. Help, please

  [Original title: Lenovo g 500]

  Hello

  Check with Lenovo support, their drivers and documentation online and ask for their
  Forums about known problems.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/ I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Get error "this application does not work without Google play services"...!

  Hello

  I use google maps in my application and be able to install the apk from file in the BB device. But after installation when launching the application, I get an error "this application does not work without Google play services.

  How can I get google game services to the BlackBerry device.

  Kind regards

  NGO.

  The BlackBerry Runtime for Android applications does not support Google Maps (or Google Services play). If your application uses Google Maps, there are two ways that you can support mapping in your application. One option is to replace the library card theGoogle with a WebView that integrates the web version of Google Maps.

  For more information on this process, see using a WebView to view Google Maps.

  Another option is to replace Google Maps with OpenStreetMap, which is a free card all over the world.

  For more information on this process, see Replace Google Maps with OpenStreetMap.

• BlackBerry GPS App Z30 maps does not work without wifi

  Hi there maps GPS app for BB does not work without wifi?

  Very well. Good. Wanted to make sure that you guessed it sorted.

• Win version first elements 14 rather than Mac version you downloaded. Serial number does not work. How to get the right serial number

  Win version first elements 14 rather than Mac version you downloaded. Serial number does not work. How to get the right serial number?

  It is unclear what problem you are facing... the wrong version or the wrong serial number.  The serial number is likely for the other version.  You don't want the serial number of Windows or the Mac version?

  One of the following conditions may be useful...

  You can exchange languages/platforms for a newer version product if you follow the instructions on the following link:

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Order-Product-Platform-Language-swap.htm

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• JavaScript works with an alert, but does not work without it. Why?

  This happened to me before, but I was able to solve my problem. Now I'm not.

  Let me explain: I have a javascript function which I call when I double click on a line on a table:

  [code]

  	function CallServ (evt) {}
  	source var = evt.getSource ();

  	AdfCustomEvent.queue (source, "call",
  	{
  	},

  (false);

  	auxDblClick.call (this, source);
  	}

  	function auxDblClick (CBC) {}
  	split var = src.toString () .split ('=');
  	var idButton = split [1];
  	var split2 = idButton.split(':');
  	okButton = split2 var [0].concat(':');
  	for (var i = 1; i & lt; (split2.length - 1); i ++) {}
  	okButton = okButton.concat (split2 [i], ' :');)
  	}
  	okButton = okButton.concat ('dc_cb1');
  	var comp = AdfPage.PAGE.findComponent (okButton);
  	Alert (COMP);
  	AdfActionEvent.queue (comp, comp.getPartialSubmit ());
  	} [/ code]

  As you can see, my alert line is commented. If it is not commented, the "auxDblClick" feature works very well: it will print the model on the alert, and then it will perform the action of the dc_cb1 button. However, when I commented the alert function, it stops working.

  I have PartialTrigger set to "true" on my dc_cb1 button and the clientComponent is set to 'true '. I've also set to true ClientComponent on the table, but it does not work.

  So, why the function working with alert, but does not work with the alert off the coast? What Miss me?

  
  P.S: jdev version 11.1.2.4.0

  I found the solution:

  Before the "AdfActionEvent.queue (comp, comp.getPartialSubmit ());" line, I used the update function. Like this:

  	var t = document.getElementById (okButton);
  	t.Focus ();

  Now everything works fine

• CD/dvd drive does not work - it is recognized when the computer starts, and it is listed in the Device Manager?

  I am running Vista Home Premium on a laptop Compaq Presario F700. It is listed in the list of computers of readers, it is listed in Device Manager. The lites drive that the computer boots so I know it is detected. When you run itunes or media player the player does not open. When I push the drive button it will not open. It opens with a paperclip in the exit hole. It cannot read a CD or a DVD. None of the media players even recognize there is a disc in the drive. I tried to run fixit, but it would not drive either. I tried restoring from a previous backup, without change.

  Hello

  Check / settings (BIOS/CMOS) often F2 so watch the screen as it starts - place CD/DVD
  1st in the boot order (remember to put it at the time where the fact).

  Then put in a DVD to boot Windows and see if the driver works.

  If it doesn't then it's a hardware problem.

  =======================================

  If the drive has worked in the test above, that these can help:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I am now on iOS 9.2 Game Center still does not work. When I open the app it freezes on a blank page. When I open the Game Center in the settings, it freezes and then crashes. Please Apple can solve this problem of Game Center iOS 9.2.

  I am on iOS 9.2 and Game Center still does not work. When I open the app it freezes on a blank page. When I open the Game Center in the Middle it hangs just. For this reason, I can't back up my data on my games. Please Apple can solve this problem of iOS 9.2.

  Hello Vaishnav,

  Thank you for using communities of Apple Support.

  I see that you are having problems with Game Center on your iPhone. I have a number of things for you to try.

  First force quit Game Center.

  1. Press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. Swipe to the left to find the Game Center app to close.
  3. Swipe up on the preview of the Game Center to close.

  Force an app to close the iOS

  If this does not work, then the next step would be a restoration. I recommend restore like new, without backup restore and everything first. If it works there, you can restore the backup.

  Use iTunes to restore your iPhone, iPad or iPod to factory settings

  Best regards.

• Scanner does not work for all users on the computer Windows 7

  Photosmart 7510 Scanner does not work.  My scanner has the habit of work.   Now it does not for one of the three users on my Windows 7 desktop.

  I spent over 3 hours on the phone with HP.   They had me restart the computer, Plug and unplug the printer, reinstall the software twice under different names. The software depending on what user id, it is installed under allows access to the scanner/printer to one or more users.  The scanner works with Windows Paint software for all three nicknames.

  HP response is that some user control prevents the scanner software, who used to work on all three nicknames on the computer, which now works on one or more of the users.  They couldn't tell me which user control need changing.

  The HP solution is to restore my system when I could scan for all users of three.   I don't want to do that.   Does anyone have a better solution?

  The real problem is HP error messages.   When I click on scan a document, there is no answer.  Nothing happened.

  Then I tried to scan using Windows Fax and Scan.   I got an error message which helped me locate the source of the error.   I was able to fix the problem without creating a new user account.  I had deleted bu error the file MY Document.   Restore this file fixes the problem.