Elite 7300 does not start

I have a problem starting with my (slightly more than 2 years) HP Elite 7300 Mt. startup stops at the screen to invent it. No response to any strike whatsoever, even the lights on the keyboard (keylock, numlock, capslock) are off and do not respond to press the keys.

I tried to remove all THE connections from the motherboard (including the system fans), only the power and the façade remained connected, but which did not help. Put in market with all the memory removed too resulted in continuous beep (as expected). Swap memory with a newly purchased module has not solved the problem.

Suggestions anyone?

Hello

Once you replace the system board, you will need to enter the feature byte and build the id in the BIOS for Windows must be enabled. This information is found on a label on the chassis.

Please call technical support at the 18006251175 and they will guide you through the process if you have problems.

Tags: HP Desktops

Similar Questions

  • HP 8100 elite sff does not start after upgrading processor

    I'm putting an i7 870 in a HP 8100 elite sff, but it won't start.  I get 6 beeps.  If I put the old processor in it works.  Any ideas?

    Thanks for the suggestions.  I had already updated to the latest version of the bios.  It did not help.  It turns out that when you upgrade the 8100 elite to an i7 to add a separate video card.  This is why I am getting 6 beeps.  Thanks for the help.

  • HP elite m9340f: do not start after replacing the video card. Repeating short and long beeps. Help!

    Hello: I have a m9340f HP Pavilion Elite aged five years, under vista. He had a problem with video output, so I bought a new video card and exchanged out them. but now, the computer does not start and made that one short beep and long stretch trying to power upward.  I double checked all connections and they are all good.

    Please help me if you know what the problem is.  Thank you... KarlJ

    I found that 1 beep short, followed by a long beep indicates a memory failure, try reinstalling your memory

  • Laptop does not start the screen to the top/black/blue

    Laptop will not start. HP Elite Book 250. Doesn't boot. Tried start run but says departure until a failed. Help, please.

    Hello Everlast87,

    Welcome to the HP Forums! I hope you enjoy your experience!

    I understand that your computer will not start correctly. I will do my best to help you with this problem! For help, try the procedure described in this document from HP: computer does not start

    This document contains the steps such as resetting the laptop and more, corresponding to the exact symptoms. I believe that this document will solve the problem. If this isn't the case, I would contact HP support by phone using equipment. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

    Since it a commercial product, you should post your question on the card for laptop of HP Enterprise Forumsfor more information.

    Please let me know if you have any questions or concerns. Thank you for bringing This problem on the HP Forums. Have a great day!

    Mario

  • The PC does not start

    My home PC: Compaq4000 HP (S/N: [edited by Moderator], cannot start up!

    When to connect the PC with power source and never push the PC power button. PCs come with 4 beeps and continued to repeat 4 beeps again. I don't know why?

    1. I am trying to replace it with the new RAM, but not resolved

    2. remove power supply to drive hard & CD/DVD-ROM, but not resolved

    Maybe problem come power PC or the main card?

    Can anyone help?

    Hello Xuenv,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I understand that you are having problems with your PC HP Compaq 4000 Pro small Form Factor Business does not start. I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do to the company - Compaq, Elite, Pro PC.

    I hope this helps. Thanks for posting on the HP Forums. Have a great day!

  • Siri does not start under macOS Sierra

    I've recently updated to macOS Sierra (public version) and everything seems fine, except for allowing to Siri. I tried to enable the system preferences as well as execution of the Siri application in the application. I even tried to 'facilitation' by selecting in the menu bar.

    In any case it does not start. Upon activation in system preferences, I get "There was an error in the preferences of Siri." and it takes back me to the main view of system preferences.

    Y at - he of the log files that I should be reviewed to determine the cause of this problem?

    Thank you

    Steve

    Same thing here on a MacBook Pro (13 inch, late 2011)

  • Black MacBook does not start

    I have a 10 year old black Macbook, which does not start when a battery is installed.  If it is connected without battery installed, it lights up, but if there is a battery in it, even if it is plugged in, it will get the startup sound and the screen of the Apple gray, then turn off.  I got a new battery and charge it where the charger turned green, but the results are the same.

    Any suggestions?

    It is difficult to say what is happening with this machine, since the time and wear are considerations. I don't know what version of the operating system that you use, but there is a sequence of things you should do - in order of severity.

    http://www.howtogeek.com/217158/what-to-do-when-your-Mac-won ' t-start-up.

  • iPhone hot 5s fees and does not start

    phone is connected to the load.  After a while I checked it and it was very hot.  I unplugged it and now it does not start.

    Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data.

    More troubleshooting can be found in this article:

    If your iPhone, iPad, doesn't respond or won't turn on - Apple Support

  • iMac does not start after the last security update

    Hello

    After the last update my iMac (late 2009, El Capitan) does not start.

    The iMac starts he accepts my user and password entry, the loading bar stops at 80% and then nothing happens... after I turn off the iMac. Repeating this procedure change nothing.

    Does anyone have any advice for me?

    THX

    INTELLECTUAL PROPERTY

    a solution that helped me:

    Re: security update causes damaged Apps

  • iMac does not start after 10.11.6

    Since the 10.11.6 patch my IMac does not start with my hub plugged.

    Everyone

    I assume you mean a USB hub? What does do when it's plugged in? It starts successfully when the hub is not plugged? If so, I would say that something is wrong with the hub or there is a problem with the port it is plugged or something plugged into the hub.

    Try to plug it into a different USB port on your Mac.

  • MacBook Pro does not start

    I have tried several things but the laptop won't start do not. Power cable showing green light as if the laptop is fully charged. It's like the death does not start.

    Try resetting the SMC

    Reset the management system (SCM) controller on your Mac - Apple Support

    You said "It's like death does not start."

    Does this mean that he shows no signs of life? Indicator light power?

    Hear the carillon?

    Hear the fans?

  • The FireFox 42.0.1 application does not start.

    The FireFox 42.0.1 application does not start. I can uninstall and reload FireFox 37.0.2 and that worked, but now when I load 37.0.1 it installs really 42.0.1 that no longer works.
    I had to use IE 10 to contact Mozilla.
    Year annual should be ashamed of this...
    Can you tell me why Mozilla FireFox 42.0.1 installs but won't work?
    In addition, why FireFox 42.0.1 install when I try to install 37.0.2?

    It is possible that your firewall or other security software blocks or limit Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and allow your firewall to ask permission to get access full and unrestricted, again to install for Firefox and the plugin-container and the update process.

    See:

  • Firefox does not start, the Profile Manager is not available

    Firefox worked, then update it does not start. I tried all the fixes; However, the Profile Manager is not accessible or even present in the execution file. I unintalled and reinstalled several times, but I still can't get it to work. There is no Windows or Norton firewall block so I do not understand. What can I do? I want to use Firefox because it's the best browser; but now I'm forced to use Oscar. It's not terrible, but I prefer the features I've had with Firefox

    I had upgraded to the latest version; but the thought of demotion to the version which worked perfectly. In the end, I had to defrag, do a registry clean and optimization of performance of PC, but for the upgrade launched. So, I'm happy to say that I reply to this post with my Firefox browser. Thank you very much for your help. If all goes well, I won't have problems.
    DoubleD52

  • My MacBook does not start and fires after the Apple logo. I received this error via FirstAid detail in disk utility.

    Hi Apple/community,

    I need a help.

    What it means? Operation failed! My MacBook Pro does not start. It cuts after the loading screen. What will happen?

    Any help will be greatly appreciated. Thank you!

    Well, it seems that your MacBook Pro hard drive has failed and cannot be repaired by disk utility.

    Try to reboot into single user mode: How to start your Mac in single user mode or verbose--Apple Support

    If it works, try to repair the disk with this command:

    fsck -fy

    (http://osxdaily.com/2013/08/07/how-to-repair-a-mac-disk-with-fsck-from-single-us UH-mode /)

  • Firefox does not start - claims that it is already open

    Firefox does not start. He claims to be already running, but that doesn't seem to be the case.

    I tried to create a new user profile, but when I try to open Firefox now, the menu "choose user profile". I tried the new profile and they old, and both give the same error message. "Firefox is unable to use the"Default user"profile because it is in use. To continue, close the Runspace of Firefox or choose a different profile. »

    There is an entry for firefox.exe in the menu of "details" to my task manager and nowhere else. When I try to put an end to this task, I get the following error: "the operation could not be performed - access denied."

    Due to some troubleshooting research, I tried to delete the parent.lock my profile folder, but I get this error: "the action cannot be completed because the file is opened in Firefox."

    I tried to transfer my bookmarks and preferences from Firefox to Chrome, but I had a similar error suggesting that Firefox was already open and I have to close first.

    I also turned off my computer and uninstalled and reinstalled Firefox several times.

    I'd really rather not lose all my bookmarks Firefox, modules, and preferences. I also prefer to use Firefox for Chrome, so if anyone can help me I would really appreciate it. I don't know what else to try.

    My PC runs Windows 10, incidentally.

    Try to delete the parent.lock file in the Firefox profile folder.

    See:

    What security software do you have?

    Try to create a new shortcut on the desktop Firefox and maybe to reinstall Firefox via a clean reinstall (i.e. remove the Firefox program folder).

    If you cannot remove the Firefox program folder and then try to rename this file to "Mozilla Firefox.old".

    • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
    • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"

    Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) to see if that helps.

Maybe you are looking for

  • Best sites to keep disappear once history of safari is disabled

    I'm trying to put Hotmail and my work see connectivity service as my best sites, but every time I clear history in safari that they disappear. It is only on these two sites that make others seem to work well. Any advice? Cheers.

  • My screen turned sepia toned all of a sudden!

    All of a sudden my iPhone 6 s screen turned sepia color.  How to get back to normal? Go to the brightness under settings did not work. Or he works at power off, or lock and home. Help, please.

  • Firefox in XP button

    XP ongoing enforcement if the menu bar is not clicked in the view, the "Firefox" button appears, but does not all the options available in the menu bar. More specifically, tools, that I use frequently. If the Firefox Button is supposed to replace the

  • My default printer changed suddenly in offline mode. How can I move this back to the line?

    my default printer changed suddenly in offline mode. How can I move this back to the line? Original title: printer

  • Why can not download anything?

    Dear Pinkta I'm having a problem with downloading stuff. I have a Windows 8 and I try to download the Launcher of ROBLOX player so I can play ROBLOX, but when I try the download does not start automatically. So, I try to ignore it. Then I go to my fa