EliteBook 2570p: Smart successful long DST test failed but the start in safe mode

Similar Questions

• 4540 proBook s: drive hard long DST test failed

  Product name: ProBook s 4540

  Operating system: Windows 7 Enterprise

  Problem: after Windows starts, I get a blue screen.

  Blue screen error: 0X0000007E

  Test: test result wide hard drive: SMART Check passed, Long DST failed

  Failure ID: 90FDX9 - Q 66, 804 - QFPK1F - 618V03

  Hello, is there anyone who can help me with this error? I searched hollow, the forums and the web, but could not find the same error ID.

  This error is indicative of a failing hard drive. It is not something that is fixable.

  Solve that error requires a physical replacement of the hard disk with a new and reinstallation of the operating system.

  Is your laptop stil under warranty?  Under warranty, a replacement cost to you hard drive is covered.

  Check the status of your warranty here.

• d5200t (NE504AV-ABA): computer d5200t fails to ask if I want to start in safe mode but still starts in safe mode

  My computer HP (NE504AV-ABA) d5200t has problems starting.
  
  Whenever I try to restart it from a stop, it does not ask to restart
  Windows in safe mode, and it always starts in a variety of safe mode that blocks
  Use the Ethernet port or any other network devices.  This safe mode also blocks
  using the service Windows Installer 64 bit, so I can't install any program I
  wait for help with this.
  How can I do return to start Windows in normal mode, without losing the
  various files that I have accumulated over the years?
  This is my last computer 64-bit Windows Vista SP2 and has a program that I need
  that will not run on newer versions of Windows.  No installation package for
  This program is available.
  All my last 100 backups or while it is stored on a server HP disc that will be
  is no longer boot, so these backups are EXTREMELY difficult to achieve.

  This site does not allow copy / paste, so I had to insert the text file I had prepared as if it was the code.

  It didn't work - the safe mode was not checked.  What finally fixed MOST of this problem said the startup procedure to use the last known good configuration.  Then, it took about four Windows restarts and correct the time system, to complete the fix.

  During the problem computer is often not quite in safe mode, only confused as to whether she was in safe mode or not.  'Safe Mode' did not appear in the corners of the screen, but try installing the software gave error messages saying that the installation could not be done in mode safe.  Internet connections were usually blocked.  Switching to the alternative shell is cmd.exe, the only way to tell the computer what to do, and if there is a way back to the GUI, it was well hidden.

• want to get rid of the virus of the "personal shield pro", MS programs fail because the can´r safe mode do Internet, how to solve this?

  I downloaded malware to microsoft.  Later (Odile is one).  My problem is: if I start the laptop (XPS M1210) normally, when I want to start "Odile" - "Microsoft tool emergency response" (which seems to be the solution), the "personal shield pro 2.2" attack the computer and prevents all extra work."  If I do it in safe mode, somehow it doesn´t enter the networks, as a result, programs to clean the scan only partially.  No solution.  I also tried to use "MS support tool for emergency response.  Other programs are Loaris... work partially in safe mode (without ilnternet) and well in its entirety, but stop as soon as the malware takes over.
  I think, I need to have the computer is running in safe mode with networking, but how do the internet to work in safe mode?  any other ideas?
  sincerely
  Manuel Paulet
  E-mail address is removed from the privacy *.

  Hello

  The uninstall Guide will tell you how to remove this malware. The trick is to renam the .exe
  the files as well as an example of mbam. EXE is renamed to something like malware.COM (the '.com'
  extension is important).

  Delete Personal Shield Pro is a scam to get you to pay for it, while it has no advantage at all.

  Delete Personal Shield Pro (Uninstall Guide)<-- read="" this="" link="" for="" removal="">
  http://www.bleepingcomputer.com/virus-removal/personal-shield-Pro

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  McAfee - false alarm Stinger
  http://www.McAfee.com/us/downloads/free-tools/fake-alert-Stinger.aspx

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put - right-click on it - RUN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  Run the malware removal tool from Microsoft

  RUN - type in the box-> MRT.exe

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put - right-click on it - RUN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put - right-click on it - RUN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
  It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google for
  see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
  Trojan horses, rootkits, etc.). that has infected your computer despite all security measures you have taken
  (such as the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  Fake McAfee alert Stinger - free
  http://www.McAfee.com/us/downloads/free-tools/fake-alert-Stinger.aspx

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  RUN - type in the box-

  sfc/scannow

  Then run checkdisk (chkdsk).

  RUN - type in the box-

  Chkdsk /f /r

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• start-up after norton install fails can only start in safe mode

  I don't know how this problem started, I got a blue screen on startup, start single icould my pc in safe mode.

  The only way I could use my pc was to do a system restore.

  At this point, I have lost Norton 360 v 3?

  I contacted norton and they have been very helpful, they re-installed norton remotely.

  they are just me to reboot my pc

  My pc is restarted, I got the blue screen and could only restart in safe mode, I had to again, restore the system to get online and I lost norton, but the Startup icons are still there.

  The problem may be caused by the incompatible Norton (Symantec) with the hardware or software you installed recently.

  Uninstall Norton (Symantec) in Mode completely safe
  

  ==========================================

  1. reboot the computer and start pressing the F8 on the keyboard key. On a computer that is configured to start to multiple operating systems, please press the F8 key when you see the boot menu.

  2. when the Windows Advanced Options menu appears, select Safe Mode, and then press ENTER.

  3 log on to Windows by using the administrator account or any user account with administrator privileges.

  To uninstall Norton Internet Security, please run Norton Removal Tool.

  Note: If the following tool cannot be downloaded via Safe Mode, I suggest we first download it on a different computer and then copy it to the problematic original computer to install it.

  4. Please visit the following Web site to download the tool:

  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  5. save the tool for Windows Vista desktop.

  6. run the tool according to the instructions on the Web site.

  7 restart the computer

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I want to display the number of success / testing failed in the Testtand of xml report, please help me

  Hi, I want to display the number of success / testing failed in the Testtand of xml report, please help me.

  Later, my requirement is that I should be able to view the number of test / has not passed in the header of the report too.

  I have attached a sequence to give you an idea of how to get the number of results (I don't check it works ), I used 'SequenceFilePostResultListEntry' callback to calculate the number of results.

  and the number of results is passed to the 'ModifyReportHeader' through Globals files, where you can edit the XML file to display in the Repot (follow the link in my previous post).

  Hope this helps

  AshwiN,

• BioHD-8 error code a smart test failed on the drive

  I am running vista Home premium that came pre-installed (so I don't have a disc) on a hp pavilion slimline S3500f

  I had a problem when windows wouldn't load, just kept freezing and restarting a couple of times before it load.

  I was recommended to change my graphics card, which I did and windows starts to load and then arrested again.

  Then I got a blue screen Uni, when I ran a diagnostic test, I got an error code BioHD-8 a smart test failed on the drive

  I have Norton anti-virus installed on the pc

  I would really appreciate your help on this, thanks in advance

  Hello
  I would suggest to run Startup Repair and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Otherwise, I suggest you post the question in the hp forum and check if that helps:
  http://h30434.www3.HP.com/T5/desktop-hardware/BD-p/HardwareDPC

  It will be useful.

• Friendly Mobille test fails because the Muse sets phone width in pixels

  Google recommends setting put phone in width as "width = device-width" rather than in pixels

  Is it possible to do it in Muse or do I need to go into the HTML and change the settings manually

  Not a problem to do this, but a nuisance and the Muse can replace when I update the page for another reason

  Thank you

  Kirby

  Please see the answer here Mobile friendly test fails because the Muse sets the width in pixels phone>.

• The transaction has failed, but the MONEY has been collected.

  I buy the standard on adobe cs6 online.

  the transaction has failed, but the money was successfully transfer.

  Can any who advised what to do and who should I contact with?

  Thank you.

  Contact adobe - http://helpx.adobe.com/x-productkb/global/service-b.html

• XP will only start in safe mode after service pk 3 install, mdule Eventvwr say service command failed

  After a clean install of windows xp family, with nothing but Pctools virus installed and disabled, Xp will only start in safe mode, all 3 choices, it does not start in Msconfig service diagnosis either. Eventvwr said service control module has failed. I tried to uncheck that service figure, but he said that the computer will not start if it is disabled. I uninstalled 3 times and reinstalled with the same results. A last one being a service pk 3 that I downloaded and installed in safe mode.

  It has been installed and working before the clean install of windows with pk3. I removed the patration from the hard drive, write 000 to the dick and reformatted before clean install of xp. It will work with service pk 2 is installed.

  I checked the forums and he Goggled and could not find a solution

  any help will be appreciated

  E-mail address is removed from the privacy *.

  Boris

  You must install SP3 before you install your antivirus program. This can be done safely by downloading the file in advance and install while physically disconnected from the Internet. In addition, you should keep IE at the level before installing SP3 IE6.

  Link to the standalone SP3 Installer file:

  http://www.Microsoft.com/download/en/details.aspx?ID=24

• Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Signature of the problem:
  Problem event name: PnPDeviceProblemCode
  Architecture: x 86
  Hardware ID: PCI\VEN_10DE & DEV_0428 & SUBSYS_110B1734 & REV_A1
  Configure the class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
  PnP problem code: 0000002B
  Driver name: nvlddmkm.sys
  Driver version: 8.17.13.142
  Driver date: 15/05/2012
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033

  Hi, Senga,

  Start > right click on computer

  Select manage

  Click on continue in the UAC window

  Click on Device Manager

  Click on the + sign next to the device

  Right click on driver and select rollback

  If the cancellation is dimmed, select uninstall

  Close Device Manager

  Back to zero computer and Windows will reinstall the driver

  Go to the manufacturer website, download the updated driver to update and save it to the desktop

  Double-click the .exe file to install

  You can also try booting in safe mode with network.  Download the following tool and run a scan complete to rule out malware.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16

• Profile of user failed. What should I do now? I tried to start in safe mode and it worked, but when I'm back in normal mode it still does not work.

  Help! I got a message when I tried to signon to windows saying that my user profile does not logon. I can't in my files and programs. I need to get to as soon as POSSIBLE. Help, please.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• the dst test failed

  Hello!

  I'm from the Philippines and I have a laptop G61 bought of the Canada.

  This week I was freezing and crashing issues. It started with extended stop screen then the next time I went there on all programs break and so windows Explorer. The mouse pointer still works, but everything froze, I've also noticed that "read" flashes at 5-8 second interval.

  This phenomenon is persistent even on safe mode.

  I run a diagnostic on it and on the test HARD drive he showed fails with an error RG9208-4D6RR-XD03GK-6OUM03 code

  Product ID:
  VU182UA #ABC

  I then run diagnostic test in the bios and the short test has been done, but when he changed the test for a long time he showed "HDD full 303.

  I really need help on this, this means the laptop HARD drive rplaceement? How can I recover the files if that is the case?

  Thank you!

  Address

  Hello address,

  Both the error codes and your description of the show all indicate that the hard is defective and must be replaced.

  If you want a guide on replacing the hard drive yourself, let me know.

  About your existing files, here are some options you can try.

  1. one possible way to try to recover your files from a disk non-boot is to follow the process described in the link below.  The CD of the Ubuntu operating system you create can launched from the CD alone (IE it doesn't have to be installed on the hard drive) and I've often found to successfully extract data even a hard failure.  When you created the CD, follow the instructions and see if you can save your existing files. 

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windo...

  2 another option would be to remove the drive HARD, place it in an external enclosure - is an example of the link below - connect to another PC and see if you can access your files.

  External 2.5 HARD drive caddy ".

  Kind regards

  DP - K

• Pavilion g6-2218nr short hard drive DST test Failed

  I have a HP Pavilion laptop g6-2218nr that will not start.  When you run the marketing diagnostic test and the hard drive diagnostic test, both tests showed the hard drive DST short FAILED.

  The failure code is:

  GUQDU4-6B872D-MFPX1F - 60Q 103

  Product ID:

  C2N56UA #ABA

  The laptop is unfortunately no longer under warranty.  Should the hard drive be replaced?  Can you recommend a replacement?  Are there instructions available?

  Thank you!

  Hello

  The error code indicates that the hard drive is faulty and will need to be replaced - a brief guide to do it yourself is detailed below.

  Your laptop is considered as coming with a 320 GB hard drive, but you can install just as easily a 500 GB or 750 GB HARD drive if you want a little more space - readers at the following links are examples that would be perfect for your laptop.

  Hard drive 500 GB

  750 GB hard drive.

  The procedure to replace the hard drive begins on Page 52 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive - this is described in the document of HP here.

  If you do not have your recovery discs, you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Best regards

  DP - K

• Pavilion G6-1203ey: HDD Test FAILED, but can still start Windows

  Hello

  I have laptop HP Pavilion G6-1203ey. After installing Windows (7 ultimate, 64-bit) and some drivers on this topic and after several reboots, it hung at the Windows logo and I had to power off with the power button / stop. Then after having turned it on, it gave me the opportunity to fix problems that impede it to start, there let him to restore the computer to a previous restore point and after a reboot, the windows worked again. After that, I decided to do a check of the hard drive just in case.

  The hard drive self test ended up with a message: disk full 1 (305). Then, I installed an environment to help HP Unified Extensible Firmware Interface (UEFI) and made the hard drive from there. I chose the full test options, but it ended quite quickly (in about 1 minute), with the following result:

  Test Drive: 1

  HDD SMART Check: PAST

  Hard drive short DST: FAILURE

  FAILURE ID: PTTU22-5T774L-MFPV4K - 60S 003

  PRODUCT ID: A5Q15EA #B1R

  Hard drive 1

  __________________________________________

  Test drive: FAILURE

  A little more information:

  The former owner told me that the original HARD drive was defective, reason for which he replaced with this last year. He said that other than that, no problems with the laptop. Windows works right now and this disc is quite new, so I expect no problems with it, but the results of the tests mentioned above seem to be disturbing. Is there a reason to worry?

  Thank you

  Hi Alnuir,

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post and looked into the ID of failure that you have published on the test runs DST failed. This error indicates a hard disk failure meaning that if it failed there could soon. If everything works I would be given for the backup of your data on a regular basis, just to be sure. You may have a local tech take a look at the hard drive to see how it is at the complete failure.

  Thank you