The transaction has failed, but the MONEY has been collected.

Similar Questions

• APEX: Audit trail, what status of transaction has been validated

  Hi Expert, need your help fast

  I created an audit to capture file that made the changes and what has been done changes when

  never the Delete / Update / MRU /MRD is clicked

  The question is what is the transition_name to tell me that the user has clicked the button Delete or MRU, etc.

  while I can store in the Audit file.

  That is to say I don't know who, when and what the transition was done

  Hi JAS-Oracle,

  JAS-Oracle wrote:

  Hi Expert, need your help fast

  I created an audit to capture file that made the changes and what has been done changes when

  never the Delete / Update / MRU /MRD is clicked

  The question is what is the transition_name to tell me that the user has clicked the button Delete or MRU, etc.

  while I can store in the Audit file.

  That is to say I don't know who, when and what the transition was done

  I think you can use the trigger to achieve

  for example

  CREATE OR REPLACE TRIGGER  "MY_TABLE_BIU_TRG"
  BEFORE INSERT OR UPDATE
    ON MY_TABLE
    FOR EACH ROW
  BEGIN
    IF INSERTING THEN
        :NEW.CREATED_DATE := SYSDATE;
        :NEW.CREATED_BY := NVL (v ('APP_USER'), USER);
        :NEW.TRANSITION := 'Insert';
    END IF;
    IF UPDATING THEN
        :NEW.MODIFIED_DATE := SYSDATE;
        :NEW.MODIFIED_BY := NVL (v ('APP_USER'), USER);
        :NEW.TRANSITION := 'Update';
    END IF;
  
  END;
  

  Hope this will give you an idea.

  Kind regards

  Jitendra

• No vCenter information Operations Manager of an extension of the "intellectual property" has been collected in a vCenter Server

  Hello

  I just started with a clean install of the vCloud 3.4 meter use.

  The first two collections is fine but now it is defective for vCenter Operations Manager.

  We are still using the operations manager, so it is not necessary to be removed doe to use count see the version of vCOPS (5.8.4.2199700.

  

  Get the following mail:
  Object:

  Hour meter collection usage, errors

  Body:

  Metering: start time (IP): 2015-11-04 12:00

  Duration: 9 seconds

  No vCenter info Operations Manager extension for "vCOPS IP" was taken to a vCenter Server.

  .

  Hi all

  Has had a call with VMware Support and the development of consumption measuring team. This is a bug in version 3.4, and there is a solution for this.

  The workaround is to use the user SSO ([email protected]) to connect to vCenter Server to the extent of consumption.

  Concerning

  Jean

• What is the right way to collect data XY?

  How our works of Labview code is very poor. We want to do the following: initialize a DAC and then in a loop: 1. read from an ADC or a counter. Trace playback as a point on a XY Chart (DAC setting like x, ADC read as y) 2. Assign the CAD a new value 3. Wait a while for the equipment to balance 4. Read the ADC again, etc. I don't know a good way to keep the data and send it to the XY graph. Our former program initialized a table 2D, with a column being the ramp CAD and the other holding all zeros. Then, as the data have been collected, zeros have been updated with the data. This method is not good, because the graph has always shown a flat curve until all the data, instead of scaling properly the limits of actual data. Is there a tutorial or an example to help with this concept? I basically understand the help of error and flow control task, but I don't have a knowledge of the shift registers and initialization.

  Rgann wrote:
  Our former program initialized a table 2D, with a column being the ramp CAD and the other holding all zeros.

  You must initialize the array 2D with the ramp for x and the line is that contains all the NaN. Any point that contains a NaN value will not appear on the graph.

  Usually, I prefer to keep the range constant x instead of with each new point scale, but if you want to keep the x scale tight, you can update the min and max range using nodes of property according to the current insert point.

  You already use a shift register (or feedback node) to contain your table, so this should be OK, as is.

  Also remember that if the ramp is linearly spaced, you can use a waveform graph. You just need to set 0 x and dx accordingly. (A xy chart is necessary only if the points are not evenly spaced in x.)

• I try to install the update for Microsoft Works 8 (KB977304) security, but he has been unable to download. He said it failed because error code 646

  I try to install the update for Microsoft Works 8 (KB977304) security, but he has been unable to download. He said it failed because error code 646. If anyone can help me with this that would be great.

  Hello

  Do you work on your computer? Otherwise the control panel - Windows Updates - right
  Click on and HIDE.

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Disconnect all USB storage.

  Run this tool by do right click and choose 'run as administrator '.

  Of course, all first extract it:

  http://www.Uwe-Sieber.de/files/drivecleanup.zip

  If your XP is 32 bits, use the Win32 folder.

  Reset.

  If you still can't find the drive, assign it a drive letter in disk management.

• My NET Framework 3.5 has been altered. I uninstalled the old NET 3.5 but failed to get a new program to install

  I tried to install Turbo tax. I received a message stating that the NET Framework has been altered and the necessary repair. I have uninstalled NET 3.5 and tried to download a replacement. Download was successful, but the installation failed. When I checked the programs & features in the control panel NET Framework was gone, but when I checked the updates installed, there is an update for NET 3.5 SP 1, but it does not allow me to uninstall it because I get the message that it's corrupted & to notify support. An another NET problelm 3.5 resulting is my external Western Digital hard drive does not work.

  Hello

  good reading of this information from microsoft on the method of framework net 2

  To repair the .NET Framework, you must uninstall several versions of the .NET Framework using the .NET Framework Cleanup tool, and then reinstall the components.

  http://support.Microsoft.com/kb/923100

• Windows 8 is installed by download. My motherboard has failed, but the hard drive is ok. How can I get it back?

  Windows 8 was downloaded beforehand as a test pplace for Windows XP and then paid for.  From there, I managed to create a Setup disk.  Now, five months later, my motherboard failed taking with it my CPU and RAM, but leaving intact system disk.

  Microsoft phone support, told me that the disk image is crucial and so that I can transfer it to another computer and use windows from this disk again.  Is it that simple?

  I have always understood, certainly with XP that activation has been defined by the hardware, especially the motherboard and processor.

  Hello

  Change the motherboard invites you to reactivate windows, you can refer to the activation of the phone, it would help you to reactivate windows.

  How to activate a Microsoft product using Microsoft Product Activation Center.

  http://support.Microsoft.com/kb/950929/en-us

• I paid creative cloud. I need first. But I had a month of trial version. And now the money from an account has been removed automatically, but I do not have first. What can I do?

  I paid creative cloud. I need first. But I had a month of trial version. And now the money from an account has been removed automatically, but I do not have first. What can I do?

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -If you have more than one email, but of course you use linked to your subscription

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• I bought the cc, the money has been debited from my account, but there is no notification to my adobe account and not to my mail, what im going to do?

  I bought the cc, the money has been debited from my account, but there is no notification to my adobe account and not to my mail, what im going to do?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• Save the attachment script gives error "Mail has been a mistake: AppleEvent Manager has failed. ' number - 10000

  Hi all

  I'm completely ignorant when it comes to Apple Script and I'm trying to get this simple script to work. The purpose of the script is to save attachments in a folder named when I run on the Apple Mail messages via a rule.

  This is the code:

  Tell application "Mail".

  theMessages set of selection

  Repeat with thisMessage in theMessages

  the value of the theAttachments attached to a letter of thisMessage

  Repeat with thisAttachment in theAttachments

  the value theAttachmentFileName ((chemin d'accès àle texte riche de la règle de type dossier de départ) & ' treatment of the Documents record: Hazel ") & name of the thisAttachment

  Save thisAttachment in file theAttachmentFileName

  end repeat

  end repeat

  tell the end

  
  

  The folder does not exist, but I get a "error " Mail has been a mistake: AppleEvent Manager has failed. ' number - 10000 "when I run.

  The code in the Script Editor editor also inserts "type of rule" in my code, so I guess that my syntax is faulty.

  Any help would be greatly appreciated.

  Kind regards

  Beem

  If ' folder of treatment of Hazel ' already exists in the Documents folder, the following script of GUI, which seems to work perfectly under OS X 10.11.3, should do what you ask for:

  Try

  game of theDestinationFolder to ((path to the documents folder) as text) & "Hazel treatment record" as alias

  on error - file does not exist

  return Beep 3

  end try

  say application "Mail".

  activate

  the value theMessages to the selection

  Repeat with thisMessage in theMessages

  thisMessage Open

  say application 'System events' to say process "Mail".

  click on menu item "Save attachments...". " of 1 of the 'file' menu bar item menu of the menu bar 1

  Repeat until sheet 1 window 1 is

  end Repeat

  key sequence "o" using { control down,shift down}

  key sequence "Nutty".

  click on button 'Save' of the sheet 1 of window 1

  Repeat while sheet 1 window 1 is

  end Repeat

  key sequence 'w', using {control down} - close this message

  end say

  end Repeat

  end say

• I used 128 usd with my couse accident I didn't know my dads credit card has been connected, I tried glitch a game bud I used my dads credit card money was connected couse I bought something on a game and I need the money please help me

  I used 129 usd with couse anaccident I didn't know that my dads credit card has been connected

  It has been connected couse I used on another game, then its

  already connected so I need money I have not used anything else for I have buyed and I want my dads back money / my money

  Please help me

  Nobody here can help you. We are just other users as you are. You can contact the support iTunes Store here, but they are not obliged to refund you, as all sales are final in Apple digital stores. Explain what you were doing and ask for their help.

  https://getsupport.Apple.com/

• Error: A connection has been established with the server, but then an error occurred during the connection process.

  Hello

  I have MsSql running in the cluster environment and recently face the problem when there is a security agent installed in MsSql server, which the agent does nothing but only to capture the local database activity. The error led is as below:

  ID from step 1

  Server NIBKSQLCLUST

  Job name LSBackup_DRIB

  Newspaper log shipping backup job step name.

  Time 00:00:02

  SQL severity 0

  SQL Message ID 0

  Operator by e-mail

  Operator Net sent

  Operator paged

  Retries attempted 0

  Message

  2011-03-21 08:00:02.62 * error: could not retrieve parameters of backup for primary ID '26f46141-a676-41b2-8653-11f1b13de43a '. (Microsoft.SqlServer.Management.LogShipping) *.

  2011-03-21 08:00:02.63 * error: could not connect to the server NIBKSQLCLUST. (Microsoft.SqlServer.ConnectionInfo) *.

  2011-03-21 08:00:02.63 * error: a connection has been established with the server, but then an error occurred during the connection process. (provider: Named Pipes Provider, error: 0 - no process is on the other end of the pipe.) (.Net SqlClient data provider) *.

  2011-03-21 08:00:02.63 - END OF THE TRANSACTION LOG BACKUP-

  The process to run correctly when I turned off the security officer. Advice kindly the cause of this problem and is where all configurations should be set / changed in MsSql server.

  Thank you

  Boonlep coulibaly

  Hello

  I suggest you to send your request from the link and check.

  http://msdn.Microsoft.com/en-us/hh361695.aspx

  http://msdn.Microsoft.com/en-us/library/bb545450.aspx

• The backup has failed. An error has occurred. The following information can help you resolve the error: the request has been aborted. (0x80099704D3)

  Hello, I am running Windows Vista Home Premium and trying to make Windows backup on DVD, I was able to cross 5 DVDs then it asked me to insert the DVD successfully n ° 6 I did and he never finished and I got this error:

  The backup has failed. An error has occurred. The following information can help you resolve the error: the request has been aborted. (0x80099704D3)

  The DVD I have are DVD so I can't rewrite over and over again. Can I somehow he pick up where it left off to complete my backup?

  Help! Thank you

  Lisa

  Hello

  -No, I don't have third-party backup programs installed.

  -J' tried using another disk backup, but it started it count once again as "disk 1" yet I had left off to "drive 6"and I couldn't tell if he has taken over where I left off or starting on even once, I don't want to do because I can't rewrite on my DVD. , because they are disposable.

  Because I needed to achieve this, I advanced and bought more DVD and will continue to backup even if I do not know where she had stopped. I think I can say that it not continue starting above and to the right.

  I think that the problem might have been that DVD #6 was bad, as he had a scratch on her, even if it was new out of the envelope.

  Software AV is not the issue, I am able to do backup, I wanted to just be able to pick up where I left off, as opposed to duty again since the beginning of my documents again. I just wish that Windows backup has been a little easier to use, in particular the fact that it is not "tag" my files to show who we are it is already saved, just like other software, (ex Mozy), which is very useful. And be able to choose what files I need backup rather than being limited to simply choose the 'file type '...