EliteBook 8440p: EliteBook 8440p has no RAM 8 GB upgrade

Similar Questions

• My lbp6000 has stopped working when I upgraded to osx 9 mavericks. How can I get it back?

  My lbp6000 has stopped working when I upgraded to osx 9 mavericks.  How can I get it back?

  Hi gkharris!

  I know that this issue is frustrating.  I'll be happy to help you.

  When upgrading to new operating systems, we recommend that you uninstall and reinstall the drivers.  Please uninstall the printer by following the instructions in the article:

  Uninstalling the printer driver (CAPT V3.55)

  After uninstalling the driver, please download the latest driver on the Canon USA site.  Please click the link below:

  http://USA.Canon.com/Cusa/support/consumer

  Once you are on the site, enter your model number.  Your operating system will be detected automatically.  Click on the word 'Pilot', and then select The CAPT Printer Driver Ver.3.65 and save the file. Then, open it from the save location and install the driver package.

  Finally, save the printer in the print queue by following the instructions in the following article:

  Registration of the printer with USB (Mac OS X Lion) ( CAPT LBP Series Driver3.36)

  * Although it shows OS X Lion, the instructions are the same.

  I hope this information is useful for you.  If you need assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

• I am upgrading an old laptop with Windows XP SP2 to SP3. Where can I download an offline installer that has everything I need to upgrade?

  Setup Windows XP Service Pack 3 offline

  I am upgrading an old laptop with Windows XP SP2 to SP3. Where can I download an offline installer that has everything I need to upgrade?

  -David goods ETF investor

  Where to download the SP3 Setup file:
  (The file is large but only installs the components required by your PC)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=en

  J W Stuart: http://www.pagestart.com

• my computer has never been able to upgrade to vista service pack 2, it is said that he failed and error code 80070570

  my computer has never been able to upgrade to vista service pack 2, it is said that he failed and error code 80070570. I have also a box gray volume that keeps popping up on my screen. It is grey with a yellow speaker and a red volume bar that says 0. I tried everything on the forums as a clean boot and the registry editor. Any ideas?

  I recommend you:

  Go to a command prompt:

  Start, all programs, accessories, command prompt.

  Right click on command prompt and select "Run as Administrator" http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token > and run sfc/scannow http://support.microsoft.com/kb/929833>

  Type exit (to close the elevated command prompt window)

  Reset

  See if that solves the problem.

  If not, run the update http://support.microsoft.com/kb/947821system tool >

  02:42:25 amUTC 23/08/11

• has received a notice to upgrade USB key - how? In addition, advice the installation due to the error #5 help is understand__

  has received a notice to upgrade USB key how?    also notice that on the upgrade installation is not complete due to the error #5 why?

  Please need help do not understand

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Uninstall Flash by using the uninstall program Flash Adobe link above.

  Flash is sometimes corrupted.

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  Reinstall Flash, after 1st unchecking / uncheck the toolbar Google download option there.

  See you soon.

  Mick Murphy - Microsoft partner

• HDMI has stopped working after the upgrade to windows 8 Pro

  Hi all

  After upgrading my laptop to Windows 7 Ultimate for Windows 8 Pro (upgrade of the place) my HDMI output not working anymore.
  I use a nvidia Geforce 8200 M G graphics card, went to their website and downloaded the drivers of windows 8, but this did not help.
  Is what is happening when I plug the HDMI cable, the laptop screen goes black and there is no output to the TV I am trying to connect to. However, when you remove the HDMI cable, the laptop screen does not return to normal, but still rather dark. I tried pressing + P, but it does not help, and ultimately, I can't get the laptop screen showing something by a full reboot.
  Someone has a bright idea?
  Thank you!

  SOLVED (for me at least)

  I had the same problem after I upgraded my Acer Aspire 5745PG from Windows 7 to Windows 8. My second monitor via HDMI would not be recognized.
  Here's how I solved it: went to the website of the manufacturer (Acer in my case) and downloaded the NVIDIA for Windows 7 driver and installed it. Installation was a little buggy. I had to restore my computer to an earlier point, twice (make sure that you create a restore point before you start just in case where; google if you don't know how).
  In the end, the installation was successful. I plugged in my HDMI cable and second screen has increased as before I upgraded.

  IMPORTANT: Do NOT download the driver from the website of the manufacturer of the graphics card (NVIDIA, AMD, Intel,...). Go to the Web site (HP, Acer, Dell, etc.) of the manufacturer of your PC and find the. I tried the driver from NVIDIA that I have a NVIDIA Geforce Graphics card and it would not install. If you find that several display drivers for your specific PC model on the manufacturer's website you can try then one by one. I found 3 NVIDIA for my Acer 5745P. The second was the right thing.

  Good luck everybody!

• HP EliteBook 8440p: memory modules RAM that actually work for HP EliteBook 8440p?

  Hi everyone again. I scoured these forums and others and can't find a definitive answer to the upgrade of my RAM memory.

  My system:

  HP EliteBook 8440p

  2.8 GHz Intel Core i7 M640

  Professional Win7 64 bit

  133 MHz bus clock

  BIOS: HP 68ccu, worm. F.11 (2010)

  Dual core, hyper-threaded (4)

  (?) Mobile Intel QM57 chipset

  According to Belarc Advisor, I currently have a 4MB of RAM Samsung under the keyboard module. The second location is empty.  First of all, more memory RAM is not sold in the UK? I know that the computer is capable of 8 GB and the Kingston modules, I just tried to install were 4GB each.  Sticks of Kingston are 8 GB (2 x 4), PC3-10600, CL9, 1.5V, 204 pins SODIMM modules and they do NOT work on this laptop even if they should.

  Has anyone found the secret of exactly which modules memory will work with this specific model of laptop? It is issues of density? Problems of tension? Am I missing a driver. I have to sing the thing while I install memory?

  Seriously, any help at all will be appreciated.

  Hello:

  Please read this thread, and I posted the memory you need to NewEgg if you live in the USA/Canada.

  The 8440p uses the same memory as the 6550 b.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/memory-upgrade-6550b/m-p/5340551#M207994

• EliteBook 1040 G3: Expansion RAM for Elitebook 1040 G3

  Hello

  I bought a G3 EliteBook 1040 with 8 GB of RAM and the dealer told me that the memory can be expanded to 16 GB. However, I have found no info on how to proceed? Or even any other information it can be done apart from what is stated on the website of resellers.

  Can someone help me?

  Kind regards

  Erik

  Hello

  This option is for pre-built, nonrepeating as mentioned on page 1 of the following book:

  http://h10032.www1.HP.com/CTG/manual/c04950804.PDF

  Kind regards.

• EliteBook 8560p: HP Elitebook 8560p has the possibility of a graphics upgrade?

  Try to improve the performance of my laptop for games. Cannot afford anything more than 50quid at the moment and I've seen a graphics card on Ebay that says that the guy is compatible with this laptop, but wanted to check with your people first...

  Can the HP 8650P take an upgrade?

  Here is the Manual:

  Manual

  There is no reference to an MXM slot or a separate replaceable part video card, so the answer is no your video is not extensible. If it was that you couldn't get a MXM graphics card which was worth having for 50 pounds. They cost more like 150 quid.

• My new Mac Pro has 16 RAM and looks not pretty

  Recently bought a MAC Pro (before I always bought Mac Air).  Memory seems enough and I'm still using the activity monitor to remove tasks and programs (such as flash).

  Is it possible to add Ram?

  My MAC Pro has 16 Gig RAM

• Qosmio X 500 has /HDD RAM or DOA?

  Hello

  In front of me is a QOSMIO X 500 / 02 G (PQX33A-02G00J), which has experienced some trouble.

  I learned that he was suffering from a corrupt HARD drive and have been asked to make it work again.

  On the survey, I found three likely points of failure:
  1) the two bays for HARD drives are empty
  2) the two RAM slots are empty
  (3) when the power cable is connected any of the lights turn on and the power button doesn't trigger any response.

  I was able to locate a cell phone work with a cable of the same power and confirmed:
  (1) the power cord provided with the faulty laptop is capable of powering the laptop checked.
  (2) the defective laptop does not respond when you use known good power cable.

  My question:
  * Is this model should give no sign of life, missing HDD + or + RAM? Or he suffered a critical failure more? *

  Thanks in advance,
  Kelly

  Well, the portable lights without the RAM.
  You must RAM modules in order to power the unit in place.

  But to my knowledge the power light should be lit (even if the RAM modules are not inserted) if good work adapter is connected and power would be supplied correctly to the laptop.

  In case the power led is OFF, even if the AC adapter is plugged in, then there is a problem with the motherboard (maybe electronic power supply on the motherboard).

• Windows XP pro on Emachine D4362 has 4 Ram slots but don't record it 3.5 GB as aiinstalle

  He recorded 1.5 GB on the installed 3.5 GB of PC3200 DDR 400 mhz. In the past, before the upgrade, he showed the 1.75 GB that was installed.

  How did you Go 3.5, 4 slots?  (In other words, what is in each slot?)

  Also, I guess because you say that your computer has 4 slots for RAM, you should have actually looked inside the case... but this Crucial page says that the eMachines D4362 has only 2 slots that take a max of 1 GB each for a total maximum of 2 GB.  Where did you find the information that indicates that your computer can have up to 4 GB installed?  A link would be much appreciated.

  In Googling my question above, I came across this thread which claims that the D4362 has 4 slots and can take up to 4 GB, based on the specifications of the motherboard.  But this raises the question: where is the specification of eMachine that identifies the motherboard?

  Without more information, I'm inclined to go with the conclusion of the last message in this thread in the RAM Corsair support forums: "Unfortunately, it seems that if you have the memory that is not compatible with your motherboard.»

• The g7-2240us 17.3 "laptop Pavilion has 6Gig RAM. This may evolve and if yes what is the max?

  In the product the seller information it says RAM max for the HP Pavilion laptop 2240us g7 is 6gigs.  Is this true or can it be upgrade (why else?) and if so how and what is the appropriate way to go and best bang for the buck?

  Hello

  Your machine accepts 8 GB of RAM, it has 2 connectors means that each slot can have 4 GB. Your machine currently has 6 GB of RAM, its configuration must be 4 + 2 GB. You can get Max: 4 + 4 GB, so if you wish you can take 2 GB and buy 4 GB (same characteristics with each other) for the slot. The following link shows your machine for the RAM info:

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/Pavilion+G7/Pavilion+G7-2240us-upgrades.html

  You can buy from them or use the info to buy elsewhere.

  Kind regards.

  PS I do it, there is no difference of 6 GB to 8 GB.

• Satellite U500 - 1 1 - Ram and HDD upgrade suggestions

  I am owner of a satellite U500 1 1 which has 4 GB of ram memory and hard drive HDD. There are suggestions, to upgrade up to 8 GB ram and SSD hard drive. Thanks in advance for any answers.

  I took the initiative to try Mushkin 8 gb (2x4gb) 99644 sodimm pc3-8500 7-7-7-20 essentials. After more than a month in use, I had no problem.

• Satellite A300 - 1 MM: RAM, disk, CPU upgrade

  Hello from Greece,

  I have toshiba satellite A300 - 1 MM a moment when you have completed the education that I won t to upgrade my laptop.
  For this movement I change ram, CPU and hard drive.
  But I do not know I f the system will recognize.

  _Below quote you the characteristics I want change_

  Fisrt of T3200 (1 MB of cache, 2.00 GHz, 533 MHz FSB) to
  Intel Core 2 Duo Mobile T9400 2.53 Ghz 1066 MHz 6 MB CPU
  (Deuxieme from 3 GB ram 8 GB
  Third ocz vertex 2
  Fourth one another graph one know not particular

  ? Thanks for your time

  To be clear: the upgrades of RAM and HARD drive are supported.
  Update CPU is not supported due to several reasons. Check the lease - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

  You must understand that the hardware update on mobile machinery is quite limited due to the special construction and cooling system. I put t know to what kind of operations, you use your laptop, but my A300 works perfectly with Win7 32 bit and has enough power for daily activity and all multimedia operations.

  Upgrade of RAM maximum and be happy with it.