EliteBook 8470p: rest of the aministrator bios

Similar Questions

• EliteBook 8470p: rest the bios lock

  I thank everyone for your interest in HP responded to my problem and no problem has been resolved or not, I'm very happy to get in touch with me, but we're not able to solve the problem because the real.

  -Buy the user of the machine
  -L' lack of an official purchase invoice
  - And the title of the warranty period

  Greetings

  Hello

  The only option left would be to replace the bios chip - is an example on the following link.

  http://www.eBay.com/ITM/BIOS-chip-HP-EliteBook-8470p-8470w-no-password-/381247763229

  Kind regards

  DP - K

• The password bios EliteBook 8470 p: 8470p

  Hi can any body help me.

  I bought an elitebook 8470p online for my device of the school for girls, but the BIOS is password protected and it will start only from the HARD drive. I need to install an OS on it!.

  How can I unlock it?

  SKU C8J77PA #ABG

  S/N [redacted]

  UUID 1BD5709194A0E211B9702BC65F06E0D4

  Thanks in advance for you help.

  Hello

  I understand your question and if you have a consumer unit, we could have you based on the serial number or other codes desable, you have a commercial unit and security that is high compared with other units... If you want the device to be able to work, you will need to discuss with HP support, call your local support tech, they can only help you.

• HP Elitebook 8470p: bios password forgotten

  Can I get the default bios password for.

  HP Elitebook 8470p

  Series: [personal information]

  Product: C3J53UP #ACB

  Hello

  Unfortunately, business machines such as Probooks or EliteBook have more strict security consumption patterns - they do not produce "stop codes", the password cannot be derived from the serial number and the code is stored in a nonvolatile memory to remove the RTC cell does not reset the password in this case.

  If you Contact HP Business support they should be able to send you a file custom SMC.bin that you can use to reset the password at startup.

  Kind regards

  DP - K

• HP Elitebook 8470p BIOS password reset

  Hello

  Can help you with a BIOS reset on a HP Elitebook 8470p password

  Serial number: [edited by Moderator serial number]?

  Thanks in advance.

  Thanks, but unfortunately did not work.

  Have registered a case with HP, answer below, waiting for answer:

  Hello

  Here are the steps to create USB Bootable USB drive and use the HPREADID for the information. TXT file.

  You need create the boot USB device and run the HP ReadID since the USB boot device. Here are the instructions step by step to get the necessary information.

  1. Connect a USB device to the USB port on the computer
  2. Run the Application HPUSBFW. EXE
  1. Ensure that ""device "' > > ' File System" : FAT 32 and > > "" Volume Label " is filled in as seen in the image above."
  2. Select/check mark > > create a boot BACK disk
  3. Select Browse and locate the file extracted USB Boot > > Files BACK into the system.
  4. Select OK and select the Start button
  5. Click on the " Yes" option to format the USB key (* Note all existing data on the USB key will be lost) ""
  1. USB drive will begin with the message 'Formatting the device' (* Note: this process will take a few minutes)
  1. You should see a Message format complete successfully
  1. Click the close button to exit the application.
  1. Now copy the file P32015_hpreadid.exe from the screen on the USB.
  1. Connect the USB device to the system, and turn on the device.
  1. Press ESC on the keyboard to bring up the START MENU
  1. Then select the F9 option to bring up the OPTION of START MENU
  1. Select the DRIVE HARD USB and press enter
  1. You should see a prompt C:\ .
  2. Enter the following command to C:\ guest
  3. C:/HPREADID.exe Press ENTER to get the information to display on the screen
  4. C:/HPREADID.exe > info.txt and press enter-T his saves the file on the USB key as info.txt
  5. Ask to Email us with the file Info.txt of new measures on the issue.

  Once you have the info.txt file, please send us the same as an attachment. Please let me know if you need help on the case.

• EliteBook 8470p: remove the custom logo of 8470p - using EREPLOGO. EFI

  I just bought a used HP EliteBook 8470p who I am in reconstruction.

  The previous owner (who I didn't contact) changed the POST logo screen, appearing briefly at startup to display a political statement - I want to remove and restore the default the HP Logo.

  HP (702342-001, created in June 2012) technical white paper, I determined the following high level steps:

  -I'm running BIOS 2012 generation specifications

  -The EREPLOGO of HP. EFI utility is required to make the changes by using the option "ereplogo /e.

  -J' I run the EREPLOGO. Utility of EFI "EFI Boot file" option in the Menu "Startup Options".

  Questions please:

  Is this still the correct way to implement this change?

  The white paper and the SoftPAQ containing the utility (sp58176.exe) are both dated 2012. Here is the latest version available? That is 4 years old!

  Thank you.

  For those interested, I managed to solve the problem that I came with the help of this EREPLOGO. The EFI utility.

  The utility is available for download in the software and drivers for my device (HP EliteBook 8470p) Web page and I followed the steps described in the technical documentation that accompanies the download. Crime (in this case) logo has been removed by the use of a control subject via the EFI Shell to start setting switch.

  So yes, it's getting a little old, but the utility worked perfectly on my system BIOS UEFI.

  Thanks HP!

• HP elitebook 8540w: recovery of the hp 8540w bios problem.

  Hello everyone,

  I have hp elitebook 8540w that stuck on the screen of the logo with the text below "press the ESC key for startup menu '.

  its seems that something is not wrong with the bios, so I tried to recover the bios with usb key method and win + B key

  my new problem is that when I press the power after pressing win + B a flashlight is from the middle of

  the touch screen which is located in front of the keyboard under the screen, it contains the letter 'A '.
  and on the left of the letter a photo of a lock, does that mean flashlight?

  http://icecream.me/bf66d93981e4511cec04e7276ef7b0cb

  Hello @Alghzawi,

  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do to commercial Forums.

  Even if it is a Commercial product, I found that the system tells you that the caps lock is on.

  I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. This will restore all the functions return to default settings.

  You can try perform a reset.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Here is a link to computer does not start for Windows.

  Can you hear the Fans? If so, try to connect to a monitor to see what is happening.

  Here's a video that might help. It shows you how to reinstall the HARD drive, which is sometimes useful

  Thank you.

• 8470p: Elitebook 8470p help install XP

  Hello

  I need help.

  I want to install Win XP 32 bit on my Elitebook 8470p, which came with Win8. I need to do a clean XP install on the laptop.

  If anyone can help me please you through the steps necessary to install XP on this laptop?

  I have a bootable CD with installation of XP, I start the installation but the laptop freezes at the "Setup starts windows" and displays the BSOD with acpi.sys inside.

  I tried many options in the BIOS, like disabling AHCI and activation IDE mode and a lot of other options, but no one allows to go beyond this error.

  Thank you.

  Hello:

  Set the drive controller setting in the BIOS to AHCI.

  Also enable the legacy mode in the BIOS, that must disable secure boot.  XP is not compatible with secure startup.

  Then read the info at the link below, section of Intel.  Then read the info on the downloadable document for how to integrate all the sata drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-system-and-recovery/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

  I compressed upwards and tied the drivers that you need wake below.

  Slipstream the unzipped file the entire file.

• EliteBook 8470p: EliteBook 8470p USB 3.0 ports driver not installed in Window 7 Ultimate 32 bit

  Dear Sir.

  I am facing problem in installing driver for USB 3.0 in EliteBook 8470p on Windows 7 Ultimate 32 Bit Port. So please say if 32-bit is taken in charge or 64-bit supported for USB 3.0 driver.

  its two USB 3.0 ports doesn't detect the USB 2.0/USB 3.0 or USB key (Flash DRIVE, portable, etc.)

  Please answer soon

  Hello:

  The usb controller you model posted ID indicates that your laptop is not a p 8470, but a p 8460.

  You need this driver usb 3 to this ID.

  FTP://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54511.exe

  The 8470p have the Intel USB3 controller and the 8460 p have the Renesas Electronics USB 3.0 Host Controller.

  That's why I finally asked for hardware ID, because if you had a 8470 p then or the other of these Intel drivers I posted should have worked.

• EliteBook 8470P: protecttools install question

  I just instaled a new copy of windows 7 on my elitebook 8470p. I have downloaed and installed the drivers from neccasary one at a time. I try to install protecttools and IE I have a newer version already installed.

  http://prntscr.com/918lq7

  What is the problem here?

  the reason why I want protecttools is for two things.

  1. I installed the add-on software face recognision

  2. I want to disable the everythim of his annoying beep you drive your palm on the fingerprint reader, I read that there is a setting here to turn sounds

  Yes, I searched for the specfic model drivers and my operating system... I always get the same error message during installation

• HP EliteBook 8470P: simple exchange of ssd with hard disk?

  I just bought a 1 t Samsung SSD 850 EVO 2.5 "SATA drive III to replace the hard drive in my Elitebook 8470P. Is that going to be just a simple swap where I remove the old hdd and plug the new ssd? That was the plan, but I have been wrong before passing.

  I have 2 images of system backup if necessary.  I disabled the auto Defrag in my security software. I am completely new to ssd and would have had to ask this before I dropped a bundle on one, but it is what it is. Any help is appreciated.

  Hello

  It is possible and I hope that your backup image is appropriate.

  Kind regards.

• EliteBook 8470p: drivers for HP EliteBook 8470p

  Hello

  I am trying to find the drivers:

  -System base unit

  -BCM20702A0

  -Network controller

  HP EliteBook 8470p.

  Thanks in advance.

  Hello:

  Here are links to the drivers you need...

  Base system device:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212842&swItemId=ob_124666_1&swEnvOid=4059

  BCM20702A0:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212842&swItemId=ob_132205_1&swEnvOid=4059

  Network controller:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212842&swItemId=ob_132049_1&swEnvOid=4059

• EliteBook 8470p do not use more than 3 GB memoury

  In my HP elitebook 8470p I have 4 GB of ram but only 2.89 GB is used.

  By running it on Windows 7 Professional (32 bit). Why do you have that I have more than 1 GB of ram unusable. Is it possible to use it?

  

  Hello

  Please read the long explianation:

  http://blogs.msdn.com/b/hiltonl/archive/2007/04/13/the-3GB-not-4GB-RAM-problem.aspx

  Even with the 64 bit OS, some machines still needs RAM for the material. I'm working on a few machines that need 32 GB (no typo error) for the material.

  Kind regards.

• Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  The error you mentioned does not match the description of the usual Windows blue screen errors. When I put this error for a web-search, it has proved to be a common problem with some HP computers. I was able to get my hands on the following link for a thread in HP communities that contains information about this error. Have a read of the content in this link and see if this applies to your situation:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/HP-6730b-quot-BIOS-application-error-501-quot/TD-p/1075640

  Windows errors blue screen looks something like this. If you receive these errors, let us know about it as well as the complete info you see on the screen. And the error you mentioned in your initial post, I guess that the HP support forums would be a better place to discuss. Here is the link to the HP support forums:

  http://h30434.www3.HP.com/

• Is it possible to get photos on an old iPod worm iOS 5.1.1 the cloud, photos or on my desk?  My Mac and all the rest is the current version.

  Is it possible to get photos on an old iPod worm iOS 5.1.1 the cloud, photos or on my desk?  My Mac and all the rest is the current version.

  iCloud library requires iOS 8.3 or later. However, you can use the USB cable (cable of load with the detached charger) and connect it to your Mac. See: import photos and videos from your iPhone, iPad or iPod touch - Apple Support