EliteBook 8470P: protecttools install question
I just instaled a new copy of windows 7 on my elitebook 8470p. I have downloaed and installed the drivers from neccasary one at a time. I try to install protecttools and IE I have a newer version already installed.
What is the problem here?
the reason why I want protecttools is for two things.
1. I installed the add-on software face recognision
2. I want to disable the everythim of his annoying beep you drive your palm on the fingerprint reader, I read that there is a setting here to turn sounds
Yes, I searched for the specfic model drivers and my operating system... I always get the same error message during installation
Tags: Notebooks
Similar Questions
-
8470p: Elitebook 8470p help install XP
Hello
I need help.
I want to install Win XP 32 bit on my Elitebook 8470p, which came with Win8. I need to do a clean XP install on the laptop.
If anyone can help me please you through the steps necessary to install XP on this laptop?
I have a bootable CD with installation of XP, I start the installation but the laptop freezes at the "Setup starts windows" and displays the BSOD with acpi.sys inside.
I tried many options in the BIOS, like disabling AHCI and activation IDE mode and a lot of other options, but no one allows to go beyond this error.
Thank you.
Hello:
Set the drive controller setting in the BIOS to AHCI.
Also enable the legacy mode in the BIOS, that must disable secure boot. XP is not compatible with secure startup.
Then read the info at the link below, section of Intel. Then read the info on the downloadable document for how to integrate all the sata drivers.
I compressed upwards and tied the drivers that you need wake below.
Slipstream the unzipped file the entire file.
-
Dear Sir.
I am facing problem in installing driver for USB 3.0 in EliteBook 8470p on Windows 7 Ultimate 32 Bit Port. So please say if 32-bit is taken in charge or 64-bit supported for USB 3.0 driver.
its two USB 3.0 ports doesn't detect the USB 2.0/USB 3.0 or USB key (Flash DRIVE, portable, etc.)
Please answer soon
Hello:
The usb controller you model posted ID indicates that your laptop is not a p 8470, but a p 8460.
You need this driver usb 3 to this ID.
FTP://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54511.exe
The 8470p have the Intel USB3 controller and the 8460 p have the Renesas Electronics USB 3.0 Host Controller.
That's why I finally asked for hardware ID, because if you had a 8470 p then or the other of these Intel drivers I posted should have worked.
-
EliteBook 8470p: remove the custom logo of 8470p - using EREPLOGO. EFI
I just bought a used HP EliteBook 8470p who I am in reconstruction.
The previous owner (who I didn't contact) changed the POST logo screen, appearing briefly at startup to display a political statement - I want to remove and restore the default the HP Logo.
HP (702342-001, created in June 2012) technical white paper, I determined the following high level steps:
-I'm running BIOS 2012 generation specifications
-The EREPLOGO of HP. EFI utility is required to make the changes by using the option "ereplogo /e.
-J' I run the EREPLOGO. Utility of EFI "EFI Boot file" option in the Menu "Startup Options".
Questions please:
Is this still the correct way to implement this change?
The white paper and the SoftPAQ containing the utility (sp58176.exe) are both dated 2012. Here is the latest version available? That is 4 years old!
Thank you.
For those interested, I managed to solve the problem that I came with the help of this EREPLOGO. The EFI utility.
The utility is available for download in the software and drivers for my device (HP EliteBook 8470p) Web page and I followed the steps described in the technical documentation that accompanies the download. Crime (in this case) logo has been removed by the use of a control subject via the EFI Shell to start setting switch.
So yes, it's getting a little old, but the utility worked perfectly on my system BIOS UEFI.
Thanks HP!
-
HP Elitebook 8470p: bios password forgotten
Can I get the default bios password for.
HP Elitebook 8470p
Series: [personal information]
Product: C3J53UP #ACB
Hello
Unfortunately, business machines such as Probooks or EliteBook have more strict security consumption patterns - they do not produce "stop codes", the password cannot be derived from the serial number and the code is stored in a nonvolatile memory to remove the RTC cell does not reset the password in this case.
If you Contact HP Business support they should be able to send you a file custom SMC.bin that you can use to reset the password at startup.
Kind regards
DP - K
-
HP Elitebook 8470p BIOS password reset
Hello
Can help you with a BIOS reset on a HP Elitebook 8470p password
Serial number: [edited by Moderator serial number]?
Thanks in advance.
Thanks, but unfortunately did not work.
Have registered a case with HP, answer below, waiting for answer:
Hello
Here are the steps to create USB Bootable USB drive and use the HPREADID for the information. TXT file.
You need create the boot USB device and run the HP ReadID since the USB boot device. Here are the instructions step by step to get the necessary information.
- Connect a USB device to the USB port on the computer
- Run the Application HPUSBFW. EXE
- Ensure that ""device "' > > ' File System" : FAT 32 and > > "" Volume Label " is filled in as seen in the image above."
- Select/check mark > > create a boot BACK disk
- Select Browse and locate the file extracted USB Boot > > Files BACK into the system.
- Select OK and select the Start button
- Click on the " Yes" option to format the USB key (* Note all existing data on the USB key will be lost) ""
- USB drive will begin with the message 'Formatting the device' (* Note: this process will take a few minutes)
- You should see a Message format complete successfully
- Click the close button to exit the application.
- Now copy the file P32015_hpreadid.exe from the screen on the USB.
- Connect the USB device to the system, and turn on the device.
- Press ESC on the keyboard to bring up the START MENU
- Then select the F9 option to bring up the OPTION of START MENU
- Select the DRIVE HARD USB and press enter
- You should see a prompt C:\ .
- Enter the following command to C:\ guest
- C:/HPREADID.exe Press ENTER to get the information to display on the screen
- C:/HPREADID.exe > info.txt and press enter-T his saves the file on the USB key as info.txt
- Ask to Email us with the file Info.txt of new measures on the issue.
Once you have the info.txt file, please send us the same as an attachment. Please let me know if you need help on the case.
-
HP EliteBook 8470P: simple exchange of ssd with hard disk?
I just bought a 1 t Samsung SSD 850 EVO 2.5 "SATA drive III to replace the hard drive in my Elitebook 8470P. Is that going to be just a simple swap where I remove the old hdd and plug the new ssd? That was the plan, but I have been wrong before passing.
I have 2 images of system backup if necessary. I disabled the auto Defrag in my security software. I am completely new to ssd and would have had to ask this before I dropped a bundle on one, but it is what it is. Any help is appreciated.
Hello
It is possible and I hope that your backup image is appropriate.
Kind regards.
-
EliteBook 8470p: rest the bios lock
I thank everyone for your interest in HP responded to my problem and no problem has been resolved or not, I'm very happy to get in touch with me, but we're not able to solve the problem because the real.
-Buy the user of the machine
-L' lack of an official purchase invoice
- And the title of the warranty periodGreetings
Hello
The only option left would be to replace the bios chip - is an example on the following link.
http://www.eBay.com/ITM/BIOS-chip-HP-EliteBook-8470p-8470w-no-password-/381247763229
Kind regards
DP - K
-
EliteBook 8470p: drivers for HP EliteBook 8470p
Hello
I am trying to find the drivers:
-System base unit
-BCM20702A0
-Network controller
HP EliteBook 8470p.
Thanks in advance.
Hello:
Here are links to the drivers you need...
Base system device:
BCM20702A0:
Network controller:
-
EliteBook 8470p do not use more than 3 GB memoury
In my HP elitebook 8470p I have 4 GB of ram but only 2.89 GB is used.
By running it on Windows 7 Professional (32 bit). Why do you have that I have more than 1 GB of ram unusable. Is it possible to use it?
Hello
Please read the long explianation:
http://blogs.msdn.com/b/hiltonl/archive/2007/04/13/the-3GB-not-4GB-RAM-problem.aspx
Even with the 64 bit OS, some machines still needs RAM for the material. I'm working on a few machines that need 32 GB (no typo error) for the material.
Kind regards.
-
EliteBook 8470P: new ssd is installed and functional, but unrecognized
Hi everyone again. Just, I installed my new ssd Samsung 850 EVO and made a system image recovery. The computer works exactly as it always has, but does NOT show the new ssd when I click on computer.
However, when I go to disk management, that's what I see:
The drive is online but must be evenly distributed on the C: drive. Can someone tell me how to get this mess straightened out? Thank you once again to all those who can help you.
Hello
Nothing wrong with that. You have C: and another partition (to spare), which is not allocated. You can use this spare partition part as a second disc to store data or add it to the C:
The following guidelines may help:
http://ftp.HP.com/pub/softlib/software12/COL39102/MP-108875-4/PS5510_1315-1.exe
Kind regards.
-
EliteBook 8470p: ACPI\VEN_HPQ &; DEV_6001
Hello, I need to install the driver of nest, but I found Don t.
ACPI\VEN_HPQ & DEV_6001
My computer is a 8470p with Windows 8 Pro Elitebook.
Hello
Install the following:
Kind regards
DP - K
-
EliteBook 8470p: EliteBook 8470p GPU
Hey guys! I have a question about the 8470p with the core i5 3380 Mr. P EliteBook 8470 all come with a dedicated gpu? I have yet to find someone online with a p 8470 without a dedicated gpu. If I have one that does not appear in Device Manager and I can't seem to find when I opened the laptop.
SilverTech wrote:
Is my product number: C3J53UP #ABA
HP PartSurfer - parts for HP P/N: C3J53UP
It looks like you most likely have a 4000 Intel HD integrated Graphics GPU.
-
HP Elitebook 8470p A1029D1102: upgrade of RAM 16 GB for p 8470
Hello
I have a HP 8470p (A1029D1102) with 179 KBC Version 42.38 Council. Windows 7 Pro 64-bit operating system.
In fact, I have a 4 GB of installed RAM module and I would switch to 16 GB (2x8Gb modules).
The type of memory suitable for this laptop is 204pin DDR3 (or DDR3L), PC-3, 1600 Mhz 12800.
I don't know if the modules that I will use as upgrade memory must be 'single' or "double" channel.
My question is - is the most effeicient and reliable type of RAM upgrade appropriate for this laptop?
In fact, surfing the web, I found a "kit" (2 modules 8 GB/ea "matched"...) of the A-Tech brand at a very reasonable price (US$ 69.00) but I don't know anything about this brand.
Finally, what are the correct settings to be teaken into account when buying a 16 GB of RAM upgrade in order to have any kind of problem during installation and use?
Quite well, thank you for any help.
The best way to upgrade and purchgase a memory that works as expected during installation is to buy only guaranteed compatible memory modules are a well known manufacturer of memory.
The provider and the memory stand-by manufacturer of their products and ensure they are compatible. They have their name of the game on the market.
Using bandwidth specifications, the type and the ability to buy the memory can be hit or miss and disappointing
oYu will save a lot of time ensuring that the memory that you have selected as candidate for your laptop computer modules are guaranteed compatible. Let manufacturers carry out experimentation in their QA Labs instead of going through the hassle of doing it yourself.
-
One speaker of EliteBook 8470p works
Hi all
I use a 8470p EliteBook and noticed that only integrated speakers work.
I checked all the settings, levels, balance, done all kinds of tests and updated audio driver to the latest version.
The result is that I still hear all the sounds of the left speaker only. When testing, I hear channels left and right from the same place, as if it was Mono. Helmet works normally.
The plausible explanation only I could find, in addition to a fault, is since 2008 and for a completely different model: available to stakeholders had changed at the time and two speakers were nested in one of the slots of the speaker. However, it has been more than five years, and I think that it is not applicable.
If anyone knows the question or disassembled this machine, please let me know what you think.
Thank you!
Hi Buzev
I did a check on my p 8470 after seeing this post.
My machine has 2 speakers, but they're right next to each other on the left side of the machine. If I put hy head close enough, I can say that his slightly in front of the other, but both having one side certainly defeated the purpose of having a stereo sound!
It seems that yours is laid out the same way.
See you soon
Andrew
Maybe you are looking for
-
iOS 10.0.2 links open in safari not apps
I have an iPhone 6 and just go to ios 10.0.2. Links to connect to applications like youtube and Instagram are open in Safari instead of in their respective applications (as they have since at least ios 8). However, they take the extra step to go thro
-
My watch is paired but text messages do not alert me
MY watch do not notify me when I receive a text message
-
How to synchronize two ports data series at different frequencies of sampling?
I have a .vi I'm reading two different sensors that operate at different sampling rates high. I am able to read these two, however, there seems to be some problems of synchronization/strange offset with the devices. The first device is a device run
-
Icon clear help please blackBerry Smartphones
Hi all I am new to my BB Storm 9530. Can someone help me solve this little problem. Over the weekend, my kids want to play with my BBstorm phone, so I disable the connection first. About 10 minutes later, when I got my BB phone back on the home scree
-
IP phones direct call - only 1 DN to be isolated from the network
Hey,. Ok. It is a very simple and indeed a pretty basic question. Im just get confused what doing. Therefore, I'm all messed up. That's what I need- I have a CUCM 8.6.2 running on an MCS. I PRI E1 line works smoothly with all IP phones. All IP phones