EliteBook 8530 sparekey problem after password recovery

Similar Questions

• Satellite A500/A505 - some problems after the recovery process

  I recently used the my Satellite A500, A505 recovery partition to get rid of a particularly persistent virus after running several antivirus programs, all to nothing does not.

  Now the virus seems to have disappeared, but the computer doesn't seem to be in the State it was in immediately after its opening.

  Firstly, the resolution is such that the taskbar, menu start and the desktop icons are all much larger than normal.

  Secondly, it seems to be missing some graphics files enables it to play my games that I put on it from my backup (in other words, it is showing the bottom of the game screen and play music and SFX without showing the character sprites or the menu options).

  Thirdly, my Fn + F6/F7 does not allow me to adjust the brightness of the screen of the computer, the only way that I know how to adjust the brightness of a Toshiba laptop.

  EC who if anything, could I hurt in all this?
  What might be able to do to solve these problems?
  I don't have no internet right now, but I have a USB and eternal patience, so I can use another computer and transfer everything what you suggest on mine.

  Nevertheless, I prefer solutions that do not like it, if possible.

  Surely appreciated!

  To be honest I never heard of this issue.
  In my opinion you should try to make the installation of recovery one more time to check if the same problem occurs again.

  You have created recovery disks?
  If Yes use recovery disks for recovery image installation.

• Partition problem after the recovery of the system with a single key 6.0

  I need your help!

  My Lenova Ideapad Y430 not more start and I had to restore the system with the recovery CD I burned with a recovery key 6.0. The restore process showed no defects and no error has occurred.

  Now, after restaring the system I only 0 with a C: partition (all program files, vista, drivers etc.) 104 GB and the 'part of recovery for a key' 14.75 working. D: partition where all my documents, pictures etc. are stored are listed, but idle and not accessible nor editable with the tool Vista Diskmanagement.

  No idea what I can do?

  You can download EASEUS partition manager. It will help you to reformat the D drive.

• Vista UPGRADE LOOP causing has major problems after normal recovery help

  I have a Pavillion DV6226us computer laptop Vista Home Premium, 4 daus agp, I was forced into what I thought was a restart systematic due to some updates to VISTA & OFFICE until he got to the page config after the windows logo screen and update 3 or 3 remained at 0% and restarted and went into the loop of the startup-config-stop. I have had no other internet access at the time, but I needed the pc work so I tried options repair normal, start repair, latest config, safe mode, etc. and eventually had to do system restore, System Restore did not work, I tried 3 times I think and I know I got an error message 'cannot restore again or something' I went to the oldest available restoration and still got the update config, I deleted all the files of 3 updates in the software distribution folder, I thought this might work, I forgot pending .xml and restored then the register for a few days before the first update of Windows and nothing has worked.  I then tried a repair install and I have a windows vista business upgrade I bought that I never ended up using so I tried, but he wouldn't take the key not connected to windows, I put in the key OEM and it took, but I cancelled before starting installation cause I wanted to make sure that it was my only option When I had another pc, the next day, I found the pending.xml repair that I finally in windows. When I walked into windows, I found that there are all sorts of problems, from 1st installing office began to install but stop with the registry permission errors, I had 2 program files & program data folders (I moved the new ones to the old ones deleted duplicate files, the system was very slow I ran sfc and came back with a couple of errors that are not fixed, I watched cbs file but nothing came back under a ': can't fix "search of the file did not further that the errors were cause I had to restart with the repairs I did and run checkdisk, restart and decide if it is repairable or or try the upgrade installation , but the error of update 3 of 3 was back and now I was unable to boot from the disc, all I get is a white cursor with a black screen, I also tried 2 OEM windows vista home, & Xp Pro disk and a partition boot disk just to see if we can see the drive and it acts like its reading every time but after about 20 seconds to 2 minutes He let the fast blinking cursor and goes to loading vista, I can get into the bios, I can run all the advanced startup options (safe mode, etc.) but even a mistake. I tried to start with different bios settings and I tried to reset to default Panel of the bios, Ive tried hard reset - unplug all removin battey, by holding down the Start button / stop. Now, I've noticed a new screen coming during the load just before the screen of windows logo appears a black screen with 1/186 (_0000000_00000 CDF - MS) for 1 second and the only startup option that got no result was the controller of directory service. When I was able to run the checkdisk utility and found that this same file CDF - MS rode as error and checkdisk supposed to solve this problem, when I run the directory service again right after that it arranges the checkdisk says disc is clean, but it turns very quickly, just about 5 seconds to run checkdisk, then if I try to boot from the disc or other options of connection the error wil come back
  and loop fixing and showing his own. Ive also ran the vista test drive diagnostic memory hard tool & bios, both tools ran without error is returned without error, there was something else that happened during one of the attempts of safe mode, do not know how I got ut open winload.exe screen but I do not change anything Please help thanks

  When you did the repair system/upgrade using the version upgrade of the Installation of Vista Business disk, which was the operating system that was on the system before the problems started (before that you did the re-Setup)?  If not and you have used the OEM product key, it triggered correctly?  Go to start / computer / system properties and at the bottom it says it is active?  That is not an immediate problem, but can backfire on you in 30 days if it is not resolved.  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain that this is the same PC.  They should give you a code to enter on this screen to activate Vista (as long as it's the same version of fix than the OEM version).

  I guess you can still work in SafeMode with networking (but not normal mode).

  We will test your hard drive, a different way.  To test your hard drive, check the manufacturer and then get the diagnostic utility of: http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html.  If she failed the test, replace it.  If she passes the test, then it's probably nothing wrong with it.

  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  I want to update the drivers for the CD/DVD device (because it seems to be in place, even if it worked at least partially for the repair of the system).  If you need to get pilots to leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.  Then see if you can run another repair of system/upgrade to Vista Business upgrade disc.

  If the update 3 or 3 error always appears after that, then repost this question in Forum Windows Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where people who specialize in updating the questions will be more than happy to help you with your problem.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BlackBerry Passport wifi connection problem after password change

  I changed the password on a Wi - Fi device and since then could not connect my passport to this access point. Have you tried the wps process also without success.

  Thought maybe I could delete the old profile registered, restart and after finding the unit once again, perhaps that would accept the new password.

  I don't see how to remove the original profile.  When trying to update the password, get a message that the profile cannot be added.

  Click on the link below to delete the backup Wifi network on your Passport.

  http://help.BlackBerry.com/en/BlackBerry-Passport-series/current/help/mes1334606818545.html

  Good luck!

• EliteBook 8470p: Bluetooth problems after upgrade

  Hello, I have recently upgraded to Windows 10 Pro 64-bit of Windows 7 Professional 64-bit.  I have a LG your Pro Bluetooth headset that I used to use all the time with Windows 7 and no problems. With 10 windows when I use it is very jerky, cut in and out, stop playing, then all I hear is strange noises and then it starts randomly playing the song / audio 30 seconds later in it. Once this happens, he says they are out of reach (1-2 feet away) then stop playing for a few seconds and all of a sudden resumes play normally, then BAM he begins anew the regular routine. I need help

  Hello:

  Interesting that your notebook has a separate wireless and bluetooth module.

  I thought at that time where bluetooth radios were all on the wireless cards.

  I checked the site of Broadcom, and they only have a pilot up to W8.1.

  The only suggestion I can offer would be to try a W10 Broadcom Bluetooth 4.0 driver a newer HP laptop.

  I don't know if it works or not, because I can't break the file to see that the content is supported the hardware 20702 version.

  FTP://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74543.exe

  He could make a bad situation worse, then create a restore point, then you can go back to it if the driver worse.

• Cat6500 Sup1A password recovery problem.

  Dear all,

  I have a nasty problem with password recovery in 6500 Sup1A - 2G.

  I have read very carefully the password recovery procedure,

  http://www.Cisco.com/en/us/products/hw/switches/ps708/products_password_recovery09186a00801349aa.shtml#ouput

  Reset power, with success, get in the console > (Enable), but then I tried to put the new password.

  I get following message:

  Enter the password:

  Console >

  Console > en

  Enter the password:

  Console > (enable)

  Console > (enable) set enablepass

  The command is disabled until the system configuration file is downloaded.

  Console > (enable) 24-Nov-2012 10:30:09 PDT--07:00 % SYS-5-1 MOD_OK:Module is online

  24 Nov 2012 10:30:09 PDT--07:00 % SYS-5-4 MOD_OK:Module is online

  24 Nov 2012 10:30:09 PDT--07:00 % SYS-5 - MOD_OK:Module 3 is online

  Console > (enable) set enablepass

  The command is disabled until the system configuration file is downloaded.

  Console > (enable) set enablepass

  The command is disabled until the system configuration file is downloaded.

  Console > (enable)

  Console > (enable)

  Console > (enable) set enablepass

  The command is disabled until the system configuration file is downloaded.

  Console > (enable) 24-Nov-2012 10:30:22 PDT - 07:00 % SYS-5 - SUP_IMGSYNC:File synchronization process will start in 10 seconds

  Console > (enable)

  Console > (enable) set enablepass

  The command is disabled until the system configuration file is downloaded.

  Console > (enable)

  Console > (enable)

  Console > (enable) set enablepass

  The command is disabled until the system configuration file is downloaded.

  Console > (enable) see the race

  Current TFTP session. Try again later.

  Console > (enable) set enablepass

  The command is disabled until the system configuration file is downloaded.

  Console > (enable) 24-Nov-2012 10:31:23 PDT - 07:00 % MGMT-5 - SYS_CONFIG_START:System config began with the NVRAM configuration text file

  2012 24 Nov 10:31:24 PDT - 07:00 % SYS-5 - PORT_SSUPOK:Ports on supervisor ensures (module 2) are on the rise

  2012 on 24 Nov 10:31:24 PDT - 07:00 % SYS-3 - MOD_PORTINTFINSYNC:Port for Module 2 synchronization Interface

  2012 on 24 Nov 10:31:24 PDT - 07:00 % MGMT-5-config SYS_CONFIG_END:System finished

  2012 on 24 Nov 10:31:24 PDT - 07:00 % SYS-5-AUTOSAVE: auto-save timer started

  Console > (enable) set enablepass

  Enter the old password:

  Sorry wrong password.

  Console > (enable) set enablepass

  Enter the old password:

  Sorry wrong password.

  Console > (enable)

  Console > (enable)

  Console > (enable) 24-Nov-2012 10:31:44 PDT - 07:00 % SYS-5-SUP_IMGSYNCSTART: Active supervisor synchronizes slot0:cat6000 - supk8.8 - 1 - 1.bin

  Console > (enable)

  Console > (enable)

  Console > (enable)

  Console > (enable) set enablepass

  Enter the old password:

  Sorry wrong password.

  Console > (enable)

  Console > (enable)

  Console > (enable)

  I'm in doubt, because my config don't have any string on tftp.

  Could you help me?

  Thanks in advance.

  See the Configuration section below:

  !

  set password

  Set enablepass

  the value of disconnection 0

  set config mode text nvram

  enable auto-save set config mode text

  Set the interval for automatic saving of text config mode 360

  !

  #!

  #vtp

  the value of bms vtp domain

  VTP transparent mode set vlan

  game vtp version 2

  nwzbms name of vlan Set 7 type ethernet mtu 1500 said 100007 active state

  VLAN Set 30 name video_security type ethernet mtu of 1500 said State active 100030

  VLAN Set 31 name novinsky_31 type ethernet mtu of 1500 said State active 100031

  Set VLANs 1002 name fddi-default type fddi mtu 1500 said 101002 active state

  Set vlan 1004 name default fddinet type fddinet mtu 1500 said 101004 active bridge State 0 x 0 stp ieee

  set vlan 1005 trbrf default name type trbrf mtu 4472 101005 State assets bridge 0xf stp ibm

  define the vlan 1

  Set vlan 1003 default name trcrf type trcrf mtu 4472 said 101003 State active parent 1005 ring 0xccc off srb aremaxhop 7 stemaxhop 7 backupcrf mode

  !

  #ip

  set interface sc0 1 192.168.3.65/255.255.255.0 192.168.3.255

  set interface sc1 down

  set ip route 0.0.0.0/0.0.0.0 192.168.3.43

  set the alias default ip 0.0.0.0

  !

  #ntp

  set the timezone PDT - 7 0

  !

  Start #set command

  set boot config-register 0 x 2102

  flash slot0:cat6000 system starter set - supk8.8 - 1 - 1.bin

  !

  # Is the default port enable

  !

  !

  #module 1:2 - port 1000BaseX supervisor

  !

  #module 2:2 - port 1000BaseX supervisor

  !

  03:16 - port Ethernet, 1000BaseX #module

  set the trunk 3/3 on dot1q 1-1005, 1025-4094

  set the trunk 3/8 on dot1q 1-1005, 1025-4094

  !

  4:8 - port Ethernet, 1000BaseX #module

  !

  #module 5 empty

  !

  #module 6 vacuum

  !

  #module 15 empty

  !

  #module 16 empty

  end

  Hello

  You please set the binary model configuration mode (which is the default) then successfully to the "Console > (enable)" invites via the command 'set binary mode config' and then try the recovery procedure of password for the document again.

  Best regards

  Antonin

• After the recovery with CD Satellite C660-1FE keyboard does NOT work

  Hello

  A month ago I bought a Toshiba C660-1FE. After three weeks my HD broke down. I bought a new HD from Western Digital and I replaced the broken HD. I did a recovery of my HD image, so I had to order the recovery disks of the product on the Toshiba site (3 disks, which drive 1 and 3 were the only required for installation).

  Now I have the problem that my laptop keyboard doesn't work. I am currently using a USB keyboard and a mouse to replace my keyboard and the touchpad of the notebook.

  The keyboard of the laptop works fine in the BIOS. Therefore, I hope that it's just a driver issue.

  I have:

  tried to find and install a lot of pilots since the toshiba site, no results.
  tried to change settings in the bios (usb enabled).
  tried to fix the problem by reinstalling all of the computer repeatedly.

  The keyboard seems to work until windows loads. When the system is switched on I can press caps lock and num lock and the green lights will turn on. All this stops working once windows starts is displayed.

  Perhaps another problem in Device Manager: under the graphics card, 2 subcategories have exclamation points: it says Mobile Intel (r) 4 series express chipset family twice! I can't seem to fix these with the drivers I can find either. When I check the settings I have this message (google translate since it is in Dutch):

  + Digital signature for the drivers for this device is necessary, cannot be verified. Possible after a recent hardware or software change a file that is installed signed incorrectly or damaged, or malicious software is installed from an unknown source. (Code 52) +.

  + You must restart the computer for this change to take effect. + (obviously I've tried that too)

  Can someone give me it please help? I'm at the end of my intelligence.

  Sincerely,

  Daniel

  Hello

  Keyboard works in the BIOS, it means that the keyboard material should be ok and the connection between the keyboard and the motherboard is established.

  So, what could be bad? Keyboard driver?
  Hmm, the keyboard driver is part of the Windows operating system and is installed automatically during the installation of the OS
  I would recommend following:
  Go to Device Manager and remove the keyboard point.
  You should see something like PS/2 standard keyboard
  If you see a red x next to this unit, then it means that the keyboard is disabled.
  Usually, you should be able to activate this again (in Device Manager).
  If there is no Red Cross, so I you would recommend the deletion of this keyboard in the Manager list of devices, then reboot the laptop. Usually, the operating system should recognize the device automatically deleted and should install the driver too.

  Select this check box.

  By the way: it is possible that you received a recovery disk wrong which could explain the problems after the recovery procedure

• Problems installing software hp after system recovery system

  I just replaced the motherboard due to the failure in an hp g60. I tried using the recovery of the system since the partition and the computer reboots after about 20 seconds in the hp software installation process. Then the system recovery screen would jump upward to want to me again the whole process. After 3 times to do, I did a scan of seatools hard disk and it tested ok. Then I thought that maybe there was a file corrupted on the partition, so I ordered the hp recovery discs. I ran these discs today and I got almost 3 quarters thanks to the installation of the hp software when a screen poped and told him to end the windows session and the computer restarted again. When he started upward, poped system recovery window back up and asked me to do it again. I'm looking for any help/suggestions on this subject. Thank you.

  Hello

  This could be the problem as HP recovery disks check for a "tattoo" on the bios to make sure that the operating system is installed on the machine, that it was intended.  One way to confirm this would be to install an OS on a retail disc - even if you don't activate - just to see if this will load ok.

  Best wishes

  DP - K

• 501 PIX password recovery problems

  Greetings,

  I read the paper on password recovery, unfortunately, the orders contained in the document are not available in the PIX that I use.

  Only commands that I see are:

  Enable

  opening of session

  Logout

  pager

  quit smoking

  I can see as well

  checksum

  curpriv

  history

  pager

  Version

  I can't go to one of the commands to connect to the tftp server as described in the instructions to the:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_password_recovery09186a008009478b.shtml

  I have the .bin file of recovery password that I can't seem to get it on the PIX. Any help is greatly appreciated.

  Thank you

  Hi Brian,.

  The command that you see in the RFSO are in rommon mode, not in the normal PIX config mode, you must reload the PIX, when IP is starting, keeping hitting the ESC key and it will take you to the rommon mode. Then, you can find these commands.

  I hope this helps.

  Thank you

  Varun

  Please evaluate the useful messages.

• I'm having problems after the restart with docking station, applications, etc.

  OS X: 10.11.3

  Mac Pro 2010 2 x 2, 66 GHz 6-Core

  Graphics NVIDIA Quadro 4000 card

  24 GB Ram

  50 GB of free memory

  4 additional hard disks

  Hello community,

  I have a strange problem, after the mac is restarted, even when I decide not to join his joined apps a former State of the saved request. I can't make changes to the dock, after restart it restores an old state. When I try to import or save something in any application you see normally last modified files, yet his watch an old state. When I try to delete files that I always put my password, it's new. Im confused, I'm a long-time os x user since 1999 has never had this kind of problems.

  Help, please.

  Lars

  Please, back up all data before proceeding.

  This procedure will unlock all your user (not system files) files and reset their ownership, permissions and default access controls. If you have voluntarily set special values for these attributes on any of your files, they will be be restored. In this case, either stop there, or be ready to recreate the settings if necessary. Do that after checking these settings that did not cause the problem. If none of that is meaningful to you, you need not worry about this, but do not follow the instructions below.

  Step 1

  If you have more than one user, and the one in question is not an administrator, then go to step 2.

  Triple-click anywhere in the next line to this page to select this option:

  sudo find ~ $TMPDIR.. -exec chflags -h nosappnd,noschg,nosunlnk,nouappnd,nouchg {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing Command + V. I tried these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

  You will be asked your password of connection that are not displayed when you type. Type carefully, and then press return. You can get a warning to be careful. If you do not have a password, you will need to configure one before you can run the command. If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator.

  The command may take several minutes to run, depending on the number of files you have. Wait for a new line ending with a dollar sign ($) to appear, and then quit Terminal.

  Step 2 (optional)

  Take this step only if you have trouble with the phase 1, if you prefer not to consider, or if this does not resolve the problem.

  Start in recovery mode. You may be prompted to select a language, then the OS X Utilities appears.

  If you use FileVault 2, select disk utility, then select the icon for the volume FileVault startup ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Click the Open button in the toolbar and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  Select

  Utilities ▹ Terminal

  in the menu bar. It will open a Terminal window. In this window, type this:

  resetp

  Press the tab key. The partial order you entered will automatically end this:

  resetpassword

  Press return. Opens a window to reset the password. You do not need to reset a password.

  Select your boot volume ("Macintosh HD", unless you have given it a different name) if not already selected.

  Select your username in the menu option allows you to select the account if not already selected.

  Under Reset Home Directory Permissions and ACLs, click the reset button.

  Select

  ▹ Restart 

  in the menu bar.

• Error on admin password recovery and disk Windows XP Configuration

  I have a HP with XP Media Center Edition 2005 (no update known) that a friend ask me to try to fix them so his mother could use it... For more than a year he came down and her son used. There are 2 problems # 1 son changed the password just before it went down and can not remember. # 2 Windows will not start because of a problem of disk configuration.
  Is it there to retrieve the password so I can run chkdsk/CFS. or run the recovery and update it.

  Long fixed, obtained after walking recovery disk.

• When windows asks me to isnert a password recovery disk, it does not offer the possibility to create one in the D drive, where I have a DVD. Why?

  I have a new Dell XPS with Windows 7 Home computer. I want to create a password recovery disk. I have (1) check my CD/DVD drive works (2), I watched the video on how to create a password reset disk (3) I did the procedure successfully in the past on other computers (4) I rebooted the computer after having difficulty finding the opportunity to insert a disk in drive D, the name of the drive for my DVD / CD player. What is the problem?

  The problem is that when I am asked to insert a disc in the player I'd give myself a choice is not drive D, the name of the drive to my CD/DVD drive.
  So over and over again once I wonder to insert the disc. I also have one of these drives you can put 4 holders memory size different from the type used in cameras and I have a DVD player, it is called D drive.  Why I'm not given the option to use drive D when I'm given a choice I can insert a disc so that the password recovery disk can be created?

  Change the assignment of drive letter for the dvd player to one letter other than.

  1. sign the computer as an administrator.

  2. Insert a disk in the removable drive.

  3. type computer management in the start search box and press ENTER.

  4. click on disk management.

  5 right-click the partition, logical drive or volume that you want to change and then clickchange drive letter and paths.

  6. click on the removable drive, click it, clickchange, click the drive letter that you want to use, and then clickOK.

• Everyone is dismayed to see that there is no password recovery or reset secure put in place for encrypted backups?

  I am absolutely amazed that there is no recovery password for iPhone backups encrypted.

  (1) no password is required to access the iTunes application. He launched and the phone connects automatically.

  (2) someone might maliciously put a password. The password for Mac or device using iTunes OSx need at least before setting the encryption password.

  (3) there is no recovery option. None. Tell me: what password-protected sensitive data have NO option of recovery? No secret questions, no e-mail link, no OSx password, nothing. It's horrible.

  I'm in a situation where I remember not the password, and even if I had the foresight to write it somewhere, that the hard copy has disappeared. I suffer a miserable condition where I lose memory. I have reset passwords on all my stuff course often. That's just my new reality.

  I am faced with a situation where if I ever need to restore my device or upgrade to a new, I won't lose all my old texts and local health data in my applications (which is essential for a person with health problems). The loss of memories of conversations for a person who relies on these devices, precisely because I lose my memory is a slap in the face.

  What the risk of COMPUTER audit team approved this feature, Apple? It's quite incredible that a company of your size would be created people to fail like this. Please post a fix in iTunes for password recovery and substitute it. PLEASE, I BEG YOU.

  N ° if there is a way to recover or reset, the encryption would be completely useless.

  Exercise good security practices on the computer where you have installed iTunes and you will not you care about someone maliciously setting a password for backups.

• Satellite Pro L850 - 1-8 - a few problems after the last update to BIOS version

  Hello.

  I have some problems after that the latest bios upgrade to version 6.80. First of all, I would like to note that Setup of HW does not work for me. I tried to use this tool to change the settings of the bios without success. This was done also by running this application with administrative privileges without success.

  The initial problem appeared after I tried to disable "open Panel - Power on" setting.
  This has been activated before the update bios and at some point I wanted to disable, because he gave me a nightmare when you carry because she would then put the computer in a bag.

  No matter how many times I tried to turn it off, it seems always enabled in HWsetup.
  Another feature that I can't edit's startup speed.
  It remains fast even if I tried to change to normal.

  I'm on Windows x 64 8.
  The case is now.

  GROUP OF EXPERTS
  HWsetup reports Open PANEL - PANEL as activated, while the Bios shows it off. It is indeed turned on and I could not turn it off. I even tried him for in the Bios and then try to disable in HWsetup, no change.
  STARTUP SPEED
  HWsetup startup speed related to 'NORMAL' but actually is 'FAST '. In the Bios, it reports its normal, but its easy to say to his FASTING in.

  My questions are.
  1. it can be the cause?
  2. How can I reset all of the values in the Bios to see if that fixes anything to start?
  3. is it possible to Flash the Bios with a version more old to see if this corrects the problems I have?

  I should also mention that 'System settings' has never worked for me. I get a message "Supervisor password check failed". Please note, there is no installed password.

  I will be grateful for any given solution. Thanks in advance.

  Can you please tell us which model of laptop you have exactly (the complete model name)?