Problems installing software hp after system recovery system

Similar Questions

• Problem installing software of Bluetooth Enhanced Data Rate II (v6.2.1.3100)

  Hello

  Today, I have improved some Lenovo drivers, including the bios v1.20. When I was upgrading software Bluetooth Enhanced Data Rate II to the 6.2.1.3100, offered on the page version drivers for t400s, I got the following error, almost at the end (sorry, the OS is in Dutch): "there there was an error during the installation of the political party...» ». See below:

  

  After that he has automatically restored the update, however probably not completely, because now when I reboot with active BT I get the following error, also in Dutch: "the program can't start because btwhidcs, DLL is missing from your computer. "You may be able to solve this problem in re - install the program.

  

  My backup files, I've restored the previous version 5.2.1.2900 Setup file, but am also unable to re - install and make two mistakes now. I must have been able to install 5.2.1.2900 with the previous bios, because it was the version I checked before you run the 5.2.1.3100 update!

  How can I solve this (apart from doing a full system restore). I would not be able to install the new driver properly? If this is not the case, how can I restore BTtray.exe then.

  Thank you, Jan

  Looks like there's a problem install the Visual C++ 2005 redistributable. You can try to install these first manually by using the links below:

  x 86 version:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=200B2FD9-AE1A-4A14-984D-389C36F85647

  x 64 version:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=EB4EBE2D-33C0-4A47-9DD4-B9A6D7BD44DA

  Even if you are using Win 7 x 64 (assuming you are using Win7), according to me, you need the x 86 redistributable og version for this software. If you already have an earlier version of the redistributable installed, you might as well try to uninstall first and then reinstall Microsoft Download or try to install the BT software after uninstalling. So, you can try to uninstall the BT software and start again.

  If you already have version BT 6.2.1.1400 installed, you should ensure that you have a complete backup since this version had a serious bug when installing/uninstalling this version could wipe you HDD. I know that this is related to the 6.2.1.1400 only.

  -gan

• Problem installing software in FPGA

  Hello

  I bought an FPGA (9074).

  Following the help to get it runing it says I need to install the software using MAX.

  The device was found in MAX, the network configuration works.

  Right click on 'software '? "" remote systems "to add the basic software for operating the unit.

  I only get the first option (OR-RIO 3.1.0 minimal, January 2009), the others are grayed out, so he ends up with not a lot of functions in Labview to develop my program, I have no serial communication or the PID function for example.

  I'm using Labview 8.6.1.

  I have the module 9263 (analog output) and his work very well with the 9074.

  What should I do to be able to install a more complete set of software outside the minimum?

  Sandro

  Problem solved, any new, OR just last installed device driver.

  Thanks for the reply.

• Problem installing software with a nonadministrator account

  Can I install software on my pc using a non-administrator account?

  Can I install software on my pc using a non-administrator account?

  Yes. IF and only if you have the admin password. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Imposible to re - install Lightroom 6 after the recovery of the PC

  I recently had to recover windows 10 that is why all applications, included 6 Lightroom for desktop, have been eliminated. Now, I can not install Lightroom. After write serial number, I have this message: "serial number is valid, but it does not find any product valid in this equipment. Then I offer to select other versions of Lightroom: 1, 2, 3, 4, 5.

  Where is the error? IAM, something wrong?

  Thanks for your help.

  

  Looks like you install a version update of Lightroom 6.  The interface you see ask you to select the older version of Lightroom that you upgraded and enter its serial number so that you can prove that you are eligible to use the upgrade.

  Error "this serial number is not for a product calling it" | CS6, CS5.5, CS5

  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html

• Problem installing Windows Vista after Linix based system crashed.

  So when I bought this laptop it was running Vista, I then upgraded to 7.  After running windows 7 for a few months, I decided to try Ubuntu Linux.  I made a mistake when trying to dual boot and ended up taking my computer windows.  Ubuntu crashed while I was doing something to my Iphone with it and she would not allow me in the operating system.  I got my restore disk and installed windows again, but when I did I found that all my drivers are not installed for my wifi card and the graphics card.  I have the drivers also disk, but here shows all installed.  What should I do to recover my laptop to factory settings?

  So when I bought this laptop it was running Vista, I then upgraded to 7.  After running windows 7 for a few months, I decided to try Ubuntu Linux.  I made a mistake when trying to dual boot and ended up taking my computer windows.  Ubuntu crashed while I was doing something to my Iphone with it and she would not allow me in the operating system.  I got my restore disk and installed windows again, but when I did I found that all my drivers are not installed for my wifi card and the graphics card.  I have the drivers also disk, but here shows all installed.  What should I do to recover my laptop to factory settings?

  Hey SteveZea

  you don't say if you used your laptop to join here or not

  go to your site to manufacturers of portable computer with the computer that you use for here and find a download section

  find the drivers for your laptop model number, download and save if you use another computer to get here

  copy to flash drive, if you use another computer to do this and reinstall on your laptop

  If the problem persists then contact the manufacturer of your laptop as their recovery process is not microsofts you have problems with

  Walter, the time zone traveller

• Problems installing vista 64-bit system updates

  .... Updated download manager 29 updates but only 10 installed.  When I try to install from the Update Manager it gives me the error 646 code.

  Usually for the Office updates, manually download and install the same seem to do the trick.
  You can search for them here in number of KB: http://www.microsoft.com/downloads/en/default.aspx

  For other updates

  Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services

• Cannot install driver vga after windows recovery

  I have an acer aspire 5520g.

  For a long time, I was unable to install any except the generic vga driver.

  Now, I used the recovery tools to reset the computer to factory settings. When you try to get into windows for the first time, I get a message of 'windows install' the pc restarted unexpectedly or encountered an error. This time after the installation.

  I found that I can use 'SHIFT F10' to open a line of cmd, and there use devmgmt.msc to access Device Manager, where I find that the only missing factor is my vga driver.

  No matter which driver, I'm trying to update the standard / driver nvidia it generates a message: Windows found the driversoftware, but an error has occurred when trying to install, this devcice is incorrectly (code 1) configured.

  I found that some drivers for all devices can be installed, same removal work already pilot will result in not being able to reinstall the driver again.

  I hope someone can help, provide more information of system if necessary.

  Hello

  you used the Recovery Manager Acer reinstall vista

  It's their process non-microsoft

  drivers should be installed during the recovery process

  For more information contact Acer;

  http://support.Acer.com/us/en/default.aspx

• Problem installing software for a purchased HP2544 today

  Hi all

  I tried to install the software using the CD but I get a blue screen and memory dump came?

  I went to the HP website and downloaded the latest software and drivers for it, 64 - bit Windows 7, but I still get the same error during installation.

  I tried to install this several times tonight.

  Someone at - it ideas?

  Have never had this problem before installing any software in the past.

  Thank you very much

  Rob.

  Hello Robflyer3,

  Welcome to the HP Forums!

  I understand when you are installing the software from the CD or the HP website you receive an image screen blue/memory. I will do my best to help you!

  You connect to this printer wireless or USB?

  I need to know at what time the blue screen occurs during installation? Did you see an error message when this blue screen? If so, please send the code of error on this post.

  I would recommend a running System File Checker by following this Microsoft document here. This utility under Windows that allows users to find corruptions in Windows system files and restore the damaged files.

  I will seek forward at the hearing on your part have a good night!

• Problem installing software for all-in-one Deskjet F4210

  Hello.

  I have a problem when you install the software for my HP Deskjet F4210 all-in-One printer.

  First of all:

  • I am running Windows Vista Home Premium x 64.
  • I tried the 3 installation methods:

  (1) installation CD.
  (2) installation of downloadable x 64 Installer.

  (3) installation of downloadable x 32 Installer.

  I get the same error message (series) at each facility.

  I also tried each method of installation mode execution "Run As Administrator". Which is not exactly change the result.

  Just to try, I tried to install it on Windows XP, and it has worked very well with no error message.

  I don't know what the problem is, but I have screenshots with legends and a comment by each (to me) that explain everything.

  * Note: You can click ON the picture to SkyDrive show in its own window.

  Images:

  1) HP Installer screenshot 1

  2) HP Installer screenshot 2

  3) HP Installer screenshot 3

  4) Setup HP 4 screenshot

  If anyone can help, please do.

  I really hope that these screenshots can be useful.

  They are in order of appearance.

  Twitter: @mgarcher007
  
  My rig: HP Pavilion a6645f Special Edition: Verde.
  CPU: AMD Athlon 64 x 2 4850e @ 2.50 GHz
  RAM: 5.00 GB DDR2 800 MHz
  HDD1: 500 GB Seagate Barracuda, 32 MB cache
  HDD2: 1.5 TB Western Digital Caviar Green, 64 MB cache
  Optics 1: HL DVD-RAM
  Perspective 2: Pioneer BD-R/DVD-RW
  Graphics card: Single EVGA GeForce GTX 260 896 MB 448 - bit GDDR3 PCIe 2.0 (Yes, the card just fits, I have only one other device PCIe [a HDMI intensity Pro capture card] and I can't even keep the side panel of the computer, because the card sticks out.) I'm working on a mod for that matter).
  PSU: Ultra x 4 850w modular; SLI and CrossFire ready
  Various: Intensity Pro (HDMI capture card) for the capture of Xbox 360 and PS3 game and making game vids/fixtures.

  Hello

  You use Internet Explorer version 8? If so, uninstall Internet Explorer version 8, and then try reinstalling sw of the printer driver. You can reinstall Internet Explorer version 8 after you have reinstalled successfully the sw of the printer driver.

  

  Kiko

• Problems installing software JO 8600 pro hp as wireless on win 7 pro

  Computer no HP Officejet Pro 8600 Premium N911N, Win 7 Pro

  I installed the printer as wireless six months initially.  It worked without problem until a few weeks ago the scan function would no longer work.  The screen of the printer has an error message which I have omitted to write but as I recall it was a failure of communication and listed the possible reasons [3].  The print function worked fine.  Printing and scanning doctor froze after choosing to set the scan function.  I uninstalled the existing software to install the full features software, that I downloaded.  I was not able to reinstall the software from.  I chose the wireless connection and the software crashes when searching for devices, never find any yet the printer is connected to my network.  I repeated the process, more than a dozen times and times [2] the facility found the printer but has frozen shortly after that I chose and I continued.  I have to finish the program in the Task Manager.  I currently installed the device in USB and tried to convert wireless, still frozen.  Scan and Disk Doctor does not work because it says I don't have the full software installed.

  I'm sorry that the link does not work. I have re-posted here 'Windows 7: the Network Installation hangs on the control environment of the network screen'. Please let me know how the troubleshooting.

  Thank you.

• problems installing software hp photosmart c5180

  Hello my c5180 and my 64-bit windows 7 will not match

  It wil not install more software hp for printing / scan / copy.

  who can give an idea, s/help

  its starts with fr installation a few minutes later, gone is the installation screen.

  and nothing happens?

  I tried:

  AIO_CDA_Net_Full_Win_WW_130_140

  Thank you

  Hello jvdl,

  Welcome to the Forums!

  I saw your post on the questions you have install your Photosmart C5180 on your Windows 7 computer. I understand the installation will start, and then stop and disappear.

  I would suggest after each step from the document below to hopefully help you to install the software.

  On the Software Installation progress bar stops or crashes

  I hope this helps you!

  Good luck

• Problem installing Photoshop CS6 after computer crash.

  I bought the CS6 extended in 2012 and have been using it regularly.  Then, in the month of August, I had to reinstall after a computer crash.  For the last 30 days, when you use the softward. I was doing a popup that asks for my serial number, then it says serial number is good, but there is no such software in my computer.  Then a popup is offered which tells me to choose the appropriate program.  Photoshop CS6 is one of the choices, but not Photoshop CS6 extended.  The "test" of 30 days has expired, and now I'm locked out of Photoshop CS6 extended.

  I searched high and low on the forums but cannot find a solution.

  Can someone please help with this?  Photoshop is one of my most used tools.

  Thank you.

  James Wheeler

  is your ext cs6 and upgrade from a previous version?

• Problems installing Service packs after re intalations of windows xp home edition

  I recently reinstalled windows xp home edition, but I'm unable to download the necessary service packs and critical updates. Please can someone help me.  I tried to use control panel/sytem but nothing happens.  Please tell us how can I update mainly service packs. 1, 2, 3 as without these I have various problems it is upgrade from flash, internet explore Adobe, the list is long and please can someone urgently advise or help me. Thank you

  I recently reinstalled windows xp home edition, but I'm unable to download the necessary service packs and critical updates. Please can someone help me.  I tried to use control panel/sytem but nothing happens.  Please tell us how can I update mainly service packs. 1, 2, 3 as without these I have various problems it is upgrade from flash, internet explore Adobe, the list is long and please can someone urgently advise or help me. Thank you

  Refer to:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/how-can-i-get-Windows-Update-error-x8024400a/35ba7694-c9b2-4043-a4c0-777d4b7736dc

• Problem installing Flash Player after installing CS5

  I installed CS5 Production Premium.

  A few days later, I noticed a message of Windows 7, I have to uninstall and reinstall Flash Player.  A link is provided to the Adobe Flash uninstaller program.

  I've uninstalled it.  Now when I go to the Adobe Web site to reinstall the Flash Player, I get a message saying that it is not the latest version of Flash Player.

  I tried reinstalling Flash from the DVDs of CS5, but I still can't play Flash sites.

  Help please.

  Hello

  Please, try the steps in uninstalling of:

  http://labs.Adobe.com/downloads/flashplayer10.html#uninstallnotes

  HTH,
  Amel