EliteBook 8570w: multiple monitors

Similar Questions

• Intel Centrino Advanced - N 6205 WLAN causing blue screen (BSOD) on Elitebook 8570w Win 7 SP1 64 bit

  Hello world

  In recent months, I use a 8570w Elitebook.

  I can't tell you when the problem started, but as soon as I unplug the notebook from the power supply and WLAN is enabled, I get a blue screen after a while. Sometimes, but not this oftehn, I encounter this problem even when the laptop is connected to the power and WLAN is enabled.

  I could not determine when exactly this blue screen, but it's certainly the WLAN (Bluetooth is disabled in the BIOS for the moment). It happens most of the time when I'm under two or more virtual machines with VMWare Workstation (version 9.0.2).

  The WIFI card is an Intel Centrino Advanced - N 6205. I tried several drivers (mid-2012 at the latest in April 2013) with a complete uninstall of the previous drivers. Without success. Operating system is Win 7 SP1 64 bit.

  Google helped me a bit and I found an Intel forum where people are describing almost the same problem with these Intel WLAN modules.

  Checked the Knowledge Base of HP and I am just find more messages do not deal with the new modules.

  Should I consider replacing the WLAN (guarantee) card? Someone knows the same issue and was able to find a solution/workaround?

  All opinions are appreciated.

  Thank you
  Jerry

  Hello world

  Finally, I have launched the Intel WLAN module and replaced by a Broadcom module (HP spare part number: 669832-001, Broadcom model: BCM943228HM4L) with the driver version: 6.30.223.228 (05.02.2014).

  This solved my problem of blue screen. Intel (same as last) drivers do not work with the configuration I have on my Elitebook 8570w and I gave up to find an another software/driver associated solution. In recent weeks, I can run multiple virtual machines in VMWare (9.0.4) without problems.

  Hope this information is of help to anyone who is struggeling with the Intel Centrino Advanced-N 6205 WLAN module.

  Cheers, Jerry

• Problem with HP Elitebook 8570w screen resolution

  I have a question on what screen resolution should be used. I am using Windows 7 on my new Elitebook 8570w and when I use the recommended settings, most of the programs have very small fonts (for example Firefox, Skype, iTunes, etc.). When I change the screen resolution or the factor magifying (from 125 to 150%), the screen becomes blurred, and some of the symbols are still minimal. I've never known such a problem with one of my computers so far. Just tried Word, all the icons are incredibly small. Is there a solution to this problem, is this a known problem? Thanks for your help!

  Hello

  You are welcome. In my case, I still prefer to use Ctrl & + "zoom" screen because I might receive bad results if you use by default (larger) size of the font. For example in Word format, I can put 14pt as default for more big words, but print may be too big for many.

  Kind regards.

  PS FYI: I have to wear special glasses when working on the computer, and most of the time I connect to my laptop to external monitors (22 ", 24" and even 27").

• EliteBook 8570w system repair disc Windows 7

  Hi all

  I wanted to do a repair disc Windows on my Elitebook 8570w system. It's pretty easy because Hp has a program called Hp Recovery Disc Creator that accomplishes this task for you. It gives you a possibility to burn a Windows disc and a driver disc. What HP calls the Windows disk is the system repair disc.

  Now, my problem is that the Windows disk does not work correctly (no idea why). When booting from the DVD screen guard stuck to Windows is loading files... Also when I try to run the installer from the DVD, I get error messages that says 'F:\Sources\autorun.dll is not designed to run on Windows or it contains an error.' and after 'the file 'autorun.dll' could not be loaded or is corrupt. Setup cannot continue. Error code is [0xC1]"because I had all of a sudden to make the drive I can't simply make another DVD.

  Then, I tried to let Windows do the repair system itself disc (help to create a system repair disc). However, I get a different error message: "the parameter is incorrect (0 x 80070057).» Some people suggest that HP Recovery Disc Creator has "hijacked" the function "Create a system repair disc" window and this is what causes the problem. If HP does not give me a second try, and it prevents Windows to give me a second try as well! Then, perhaps to remove HP Recovery Disc Creator would work. However, it does not list in programs and features and I can not find an uninstall file in its directory.

  When you try to find a solution I came across a guide to create a boot Windows 7 Installation USB drive (http://www.sevenforums.com/tutorials/2432-usb-windows-7-installation-key-drive-create.html). She is to copy the files from the installation of the USB disk. Step 21 details the files that are on the installation disc. They are the same as on my system repair disc.

  Download an image of the installation disk so the same as downloading an image of the system repair disc? (I download an atm file but don't know if that makes sense) If not, are there other options to create a new system repair disc? Maybe somehow Uninstall HP Recovery Disc Creator or he fool into thinking I have not yet tried to do a Windows disc? Where can I download a disk image of the repair system somewhere online (I found most of the links are dead)?

  Please let me know if additional information is required! Thanks in advance!

  Michael

  TLDR: burned a disc repair system, the disk is not working properly, HP and Windows will not let me try to burn again. Other options?

  Hello:

  You can probably make an ISO file of the version of W7 Pro you must go to the link below.

  Use the SP1 media files regenerate.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languages-x86-amp-x64/page59?p=470600&viewfull=1#post470600

  Use the W7 Pro from the bottom of the laptop product key to activate the installation.

  This tool allows to transfer the ISO to a flash DRIVE or a DVD drive.  The tool also performs the bootable file.

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Your other option would be to order a series of W7 for your PC recovery discs, by contacting HP for the country that you live in the link below.

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

• After upgrade, Firefox 43.0.0.5820 does not appear under actual multiple monitors V5.11! How can I fix it?

  After the V43.0.0.5820, Firefox works but is invisible on the screen. I do not remember what version I have updated since then, but this is done normally under actual multiple monitors as with all other software installed.

  Currently it is forcing me to use Internet Explorer, which works flawlessly.

  If I stop actual multiple monitors, Firefox won't stay visible well that listed in Windows Task Manager.

  When I'm out of multiple monitors, Firefox works normally.

  How can I fix it?

  I uninstalled V43 and re-installed V42. This seems to have solved the problem. I didn't answer on the forum of the AMM yet but it's still the early days. I'll post a response that I get to help a resolution.

• HP Elitebook 8570w: BCM20702A0 10 64 - bit drivers for HP Elitebook 8570w Windows?

  I recently updated my Elitebook 8570w Windows 10 machine and I found your bluetooth driver is not supported. is it possible for hp develop a driver for Bluetooth so I can reuse my bluetooth mouse? Thank you.

  I saw there is a similar position, but the link is no longer achievable... so I create this new position again.

  Thank you thank you

  Hello:

  See if this driver works...

  This package contains the Broadcom Bluetooth driver for the supported models that are running a supported operating system. Broadcom Bluetooth driver is necessary to enable the Bluetooth of Broadcom devices.

  FTP://FTP.HP.com/pub/SoftPaq/sp74501-75000/sp74543 .exe

• NB520 - support for multiple monitors

  NB520 they supported multiple monitors built in, if not, how can I have multiple monitor support my NB520? I need to use a Pewerpoint 2007 (presenter to display mode differs from the public view).

  Thanks a lot for a response in advance.

  Hi smit_Aood,

  The NB520 supports an external monitor and you can use the internal monitor + external at the same time (both monitors are supported). In addition, you can choose if you want to extend the desktop on the secondary monitor or to clone.

  Using the FN + F5 key combination, you can switch between different modes.

  Last but not least, you can use also a video projector or a TV as a second monitor. A certain computer screen is not necessary. ;)

• Want to Phoenix h9: HP Envy H9 Phoenix - multiple monitors

  No Windows 10 option above, but it's a question that began with Windows 8 and continues with Windows 10.

  I have a h9 Phoenix envy that I am very satisfied, but have had trouble with multiple monitors.  I can't find any documentation on the adding more than two monitors.  I have one running on the HDMI connector and another through the DVI.  But the addition of a third monitor became a mystery.  There are two additional DVI connections, but both were covered and when the updated seem to be connected to anything internal.  They are somewhat obscured by the food, and I'd rather not shoot to see the back side, I don't have to.

  Then, there are two additional Minies connections on the same card that DVI and HDMI connectors that I use on the first two monitors.  However, I can't find any documentation on the mini type connectors (like maybe mini DVI) I can find no cable to adapt.

  Is there something in the BIOS that must be returned to activate more ports?  Three monitors is not an option in the configuration current/components?  Can I add another video card supporting three monitors?  I have the AMD Radeon HD series 7900 graphics card.

  It seems a waste to throw away when it works so well otherwise!  He performmed flawlesly with the migration of Windows 10 and could last a little longer.

  @HawkeEye

  I suggest that you try an what AMD approved DP to HDMI adapter activewhich also works with AMD EyeFinity.

  There may be a ' I gottcha "If the AMD 7900 is an OEM HP card. HP in the past has used decorum for AMD graphics cards drivers so using a retail AMD driver could be a problem, or it might work.

• The ipad pro supports multiple monitors with different content on each screen?

  I want to replace my laptop with an ipad pro.  Currently I drive three screens with my laptop, all with different content (VGA, HDMI, laptop screen) with no additional adapters.  The Ipad pro has a video card that will allow me to run multiple monitors (3 including the pro) with different content on each monitor?

  Given that the pro iPad running iOS and iOS do not supports multiple monitors, I would say no. I may be wrong, so feel free to correct me.

• EliteBook 8570w goes into sleep mode

  My (bought in may 2013) new HP Elitebook 8570W continues to go to sleep after a few minutes on Windows 7 Pro x 64 well power settings to be established NEVER sleep when it is connected to the power supply as it is. Why? I do not understand why... Never what happened to me before on other laptops or desktop computers.

  It is difficult to say because you don't provide all the details of what is in the laptop.

  From a troubleshooting perspective, I encourage you to not only upgrade the BIOS (has been updated several times early manufacturing) to all hardware drivers. The best tool to do this is Softpaq Download Manager (www.hp.com/go/sdm). Install it, let it run with the default settings and install BIOS separately ANY other update. Must be installed by itself. Then, after the reboot, re-run the SDM and install hardware drivers it shows need ONLY be updated. In addition, to add critical updates for Windows (7, 8, etc.) as this Softpaq is a compilation of patches Microsoft all rolled into one and include fixes to the problems in the operating system associated with USB, sleep, hibernate, etc.

  Hope this helps

• HP Elitebook 8570W: driver problem: other devices - device base system and unknown device.

  Hi guys,.

  After doing a clean update on my HP elitebook 8570W I had a few unknown devices in my device manager.

  The first is a device called "base system" in PCI Slot 2 (bus PCI 36, device 0, function 1). I tried everything in my ability to determine what is this device and what drivers to install, so far without success.

  In the same section. other devices, there is another unknown device on PCI Express Root complex that gives me the same headache.

  I hope you guys can help me understand this.

  If you need further information, I will be happy to provide that.

  Kind regards

  Didier

  Hello:

  The base system device is certainly the JMicron card reader needs the driver, not the alcor one.

  You need this driver...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5257503 & swItemId = ob_124666_1 & swEnvOid = 4158

  If the driver above does not installing it automatically, try to install manually.

  To manually install the driver, go to Device Manager, click the Base system device.

  Click the driver tab.  Click on set to update driver.   Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  The file is located in C:\SWSetup\sp63637

  Make sure that the include subfolders is selected and see the driver installs like that.

• Multiple monitors put in place

  I'm trying to set up multiple monitors on my desktop HP P6674y.  He has the card ATI Radeon4200 Video w / outputs both VGA and DVI on the back, and I'm the undertanding is able to handle this.

  I have two monitors of AOC 2436vh I tested individually and when hung directly via the VGA port on the office work perfectly.  However, when even try doing them individually on the DVI port, they show no signal.

  When you try to hang together, I obviously I am not able to see the screen appear as being recognized by the computer.

  Told me that I needed to change the settings of the graphics card to have two ports activated somewhere, but I don't know how to make that happen.

  Can someone please help, because I really want to get these views together as soon as I can in my workplace?

  Thank you!

  Try this article.  There are different types of DVI <>- VGA adapter and this could be the cause, if this isn't the right adapter type.  It is one of the reasons why I do not recommend the use of adapters.

  If you use a discrete video card then the video ports motherboard are disable by bios when a PCI-E x 16 video card is detected.

• HP Elitebook 8570w

  I bought my HP Elitebook 8570w in October 2013. When I bought it I noticed that the power connector has been vaguely connected to the Jack of the computer. Now, I noticed that the connection has been lost and the battery is charged either. This is why I'm not able to use my computer.

  I have 3 years site service warranty and I have to wait to talk to HP Australia Monday to solve this problem. Is there someone else had the same problem and how did you solve it?

  You have this connector always loose or closely connected?

  I contacted the local HP Office and discussed the issue. They saw that there was a crack at the internal connection to the computer. Yesterday they cam and replaced the connector. I charge the battery perfectly now.

  However, I see that it may fail again. The internal connector in full contact however the outside diameter of the connection does not provide sufficient support to the connection. The cable is heavy, where you move the cemputer from one place to another under the weight of the cable may fail again because the moment applied to the connection.

  This should be resolved by HP by the connector in the socket with internal diameters within narrow tolerance of the insert diameter Cable male, so the bending moment could not be transferred to the internal connector.

• HP Envy h8 - 1520t - can handle multiple monitors?

  I want to buy an additional monitor or two, but I don't know if my computer can handle them. According to the specifications of my computer, it has an AMD radeon hd gpu 8570.  Is there any specific kind of connection vga, hdmi, dual-link dvi to run the installation of the multiple monitor? If yes what kind of adaptors/cables do I need?

  It does not matter at all.  Most video cards have only one of each type of connector.  The key is to use the appropriate adapter if necessary.  Furthermore, carefully follow the instructions in the guide.

• A HP Elitebook 8570w fits on a 90W Docking Station A7e32AA?

  Hello

  I was wondering if it is possible to connect my Elitebook 8570w to an A7e32AA Docking Station. In the description on the HP website (http://h30094.www3.hp.com/product/sku/10432926-) it says that the 8570 p doesn't work on it.

  And I read that the 8570p and 8570w have the same docking connector (spring of other available docking stations that work for both of these laptops).

  Can someone confirm or deny this?

  Kind regards

  Senui

  Hello

  I'm sorry. If you want to only use 150W PSU for the docking station then no problem, but if you want to use 90W PSU for your machine (which needs 150W) 90W can't drive your machine as expected.

  Kind regards.