EliteBook pilot

Similar Questions

• EliteBook 8460p: pilots and docking station

  Hello!

  Could you please help me with some problems...

  I can't find drivers for:

  -System base of the unit; PCI Slot 2 (bus PCI 36, device 0, function 1); Camera PCI\VEN_197B & DEV_2392 & SUBSYS_161C103C & REV_30\4 & 1355d8e7 & 0 & 01E2

  -unknown device; PCI Express root complex;  ACPI\HPQ0004\3 & 21436425 & 0

  -Pci Serial Port; PCI bus 0, device 22, function 3. Device PCI VEN_8086 & DEV_1C3D & SUBSYS_161C103C & REV_04\3 & 21436425 & 0 & B3

  is this also related to the following problem: while the pc is on hp docking station, advanced sound comes from speakers to computer form instead of the speakers connected to the station. everything is properly connected and pluged in addition I had this configuration works when running win7...

  Thank you!

  Hello

  The drivers that you need for the ID of material are the following.

  JMicron card reader driver.

  HP 3D DriveGuard.

  Pilot the IMEI.

  Regarding the audio via the docking station, try reinstalling the IDT Audio software at the following link.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5056901 & swItemId = ob_125828_1 & swEnvOid = 4158

  When the installation is complete, restart the laptop.

  Kind regards

  DP - K

• HP Elite Book 8460p: shortage of pilots after the Installation of 32-bit Windows 7 Home Premium HP EliteBook 8460p Base model No.

  Lack of drivers after installing Windows 7 Home Premium 32-bit
  
  Basic HP EliteBook notebook PC model 8460 p
  
  Model #: WX562AV
  
  [personal information]
  
  1. base device driver
  
  PCI Slot 2 (bus PCI 36, device 0, function 1)
  
  PCI\VEN_197B & DEV_2392 & SUBSYS_161C103C & REV_30
  
  PCI\VEN_197B & DEV_2392 & SUBSYS_161C103C
  
  PCI\VEN_197B & DEV_2392 & CC_088000
  
  PCI\VEN_197B & DEV_2392 & CC_0880
  
  
  
  1 unknown Devices
  
  It is said that
  
  ACPI\HPQ0004
  
  * HPQ0004
  
  
  
  2 unknown Device
  
  USB\VID_138A & PID_003C & REV_0086
  
  USB\VID_138A & PID_003C

  Hello

  In the order displayed, you need:

  Card reader driver.

  HP 3D DriveGuard.

  Validity sensor driver.

  Kind regards

  DP - K

• A pilot missing for HP EliteBook Folio 9480 m / unknown Devide driver is missing

  Hello

  On my HP EliteBook Folio 9480 m Windows 7 Ultimate x 64 I have installed all the drivers on the HP.com site but a driver is still missing and on Device Manager it says device UNKNOWN?
  
  Should which driver I install to make sure that this driver is also installed?
  
  Please see attached the printscreen

  

  Hello:

  You're probably missing this driver...

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7089928&swItemId=ob_132986_1&swEnvOid=4059

• EliteBook 8730w ks074ut: pilot 3d

  Hi all

  I need to do a clean install of Win 7 Pro 64 bit on my trusty 8730w.  Try some Thinkpads I used make is easy in the face of this problem by allowing you to download the wifi driver, and a tool to update the system that makes most of the rest of the driver install for you.  I guess they aren't counting on old IBm'ers be smart enough to figure it out for themselves.

  Any chance of HP has a tool something like that?

  If not, could someone help me a list of the drivers that I need?

  Or maybe just the ones that I'm going to need to get a new facility for you connect to driver support page?

  I have on the 8730w

  Intel Wifi Link 5300 AGN

  CPU T9900

  NVIDIA FX 3700M

  DreamColor Display to FHD

  I appreciate the help, as always

  Mike

  Drivers for your computer is located on the HP EliteBook 8730w Mobile Workstation - download software and drivers page.  After installing the drivers above, please post the "Hardware ID" Device Manager (text only) for all other devices missing or unknown as illustrated in the example below.

  

  DreamColor display, please enter the complete product number or the name of the template in the HP customer care to get the driver for the monitor.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP Elitebook p 8460 - cannot activate wireless. the pilots checked and setting. Wireless disabled

  HP Elitebook 8460p - is there another way to turn on the wireless on an HP laptop?  I checked the settings, bios and made sure the wireless card in the laptop works. The drivers are installed correctly. When troubleshooting, it comes up with "activate the wireless. Nothing happens when you press the button. There is orange.

  Hey ATL,.

  I want to come and hard reset the computer. This usually solves problems of this kind. Here is a link with more information and how to perform the hard reset: http://h30434.www3.hp.com/t5/Notebook-Hardware-e-g-Windows-8/How-to-perfom-a-Hard-Reset-to-resolve-Hardware-Software-Issues/m-p/1965747#M84778

  Let me know if it helps!

  Thank you

  Sean S

• p pilot 8470 EliteBook

  I had to re - install Windows 7 Pro (64 bit) after a virus attack but could not connect to wireless internet since.  The laptop works when the cable is connected to the broadband router, but not when the cable is disconnected.  The laptop says that I need to download the drivers.  I tried to download from several sites, including Windows, Intel and HP, but still does not.  If anyone can help with drivers, I need to download it please. I don't know what the material in the HP EliteBook 8470p is, but to know the following:

  The hardware for the network controller ID is:

  PCI\VEN_14E4 & DEV_4359 & SUBSYS_182C103C & REV_00

  PCI\VEN_14E4 & DEV_4359 & SUBSYS_182C103C

  PCI\VEN_14E4 & DEV_4359 & CC_028000

  PCI\VEN_14E4 & DEV_4359 & CC_0280

  For the USB controller

  Name of the physical device object is \Device\NTPNP_PCI0002

  Hardware ID;

  PCI\VEN 8086 & DEV_1E31 & SUBSYS_179B103C & REV_04

  PCI\VEN 8086 & DEV_1E31 & SUBSYS_179B103C

  PCI\VEN 8086 & DEV_1E31 & CC_0C0330

  PCI\VEN 8086 & DEV_1E31 & CC_0C03

  Base system device is:

  PCI\VEN\197B & DEV_02392 & SUBSYS_179B103C & REV_30

  PCI\VEN\197B & DEV_02392 & SUBSYS_179B103C

  PCI\VEN\197B & DEV_02392 & CC_088000

  PCI\VEN\197B & DEV_02392 & CC_0880

  and

  Unknown device:

  ACPI\HPQ6000

  Help, please.

  Hello

  You need the drivers following.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5212908&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D0%257CswItem%253Dob_132049_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D3%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5212908&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_135422_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5212908&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_124666_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5212908&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_124200_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Kind regards

  DP - K

• EliteBook 8540w: pilot

  Hello. He miss a driver - PCI VEN_1180 & DEV_0843 & SUBSYS_1521103C & REV_14 - is there someone who can help me find it?

  Hello:

  You need this driver...

  This package contains the Ricoh Media Card Reader Driver for the notebook models and operating systems. The Ricoh Media Card Reader driver supports the following media: Memory Stick, xD-Picture Card, MMC, SD and smart card.

  FTP://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46972.exe

• HP EliteBook 8560w: pilot Universal Serial Bus USB Controller

  Hello

  I installed new windows 7 64 bit. I installed all the drivers, BUT the USB controller driver is not install I have tried all the drivers available for my mobile chipsets. Download HP Support Assisstance.  Please send me the link or guide me.

  Thank you

  Hello:

  Here is the link for the driver of the USB3, you must...

  FTP://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54511.exe

  If the driver does not install the device automatically, try to manually install the driver the usb controller device and navigate to the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp54511.  Make sure that the include subfolders is selected.

• pilot of missing on hp elitebook 8470p base system

  Hello

  my base system device driver is missing and I can't update m... I m using 8.1 64-bit windows

  the details are as under

  PCI\VEN_197B & DEV_2392 & SUBSYS_179B103C & REV_30
  PCI\VEN_197B & DEV_2392 & SUBSYS_179B103C
  PCI\VEN_197B & DEV_2392 & CC_088000
  PCI\VEN_197B & DEV_2392 & CC_0880

  Hello

  Download and install the driver from this link JMicron card reader.

  FTP://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63637.exe

  Kind regards

  DP - K

• HP EliteBook 8560w XX058AV - pilot fingerprinting

  Hello

  I try to install fingerprint driver

  the driver is installed correctly but when I try to use it with DigitalPersona HP it has not recognized it

  No idea what I have to do

  My goal is to base - being able to connect to the computer with my fingerprint

  Nachum

  Hi Nachum,

  I think you have HP ProtectTools Security Manager installed for this to work properly - it is on the following link.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5071171&prodNameId=5071173&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-107304-1

  Kind regards

  DP - K

• EliteBook 850 G2: SimplePass absent of the software recovery disk

  Hello

  First of all, I don't know if I post the question in the right place, and I apologize if I'm not.

  I bought the laptop with windows 7 and received two CDs with it, one for install windows 10 and the other to re - install the software that came with the computer.

  I used a program before moving on to Windows 10 * that has been activated with my finger, saved my passwords, and I was able to connect to my windows with the fingerprint account.

  After the upgrade to windows 10 and install all of the software contained in the software recovery disk, I can't find this program.

  This software should come in the recovery disk? Why is it missing? How can I get that again?

  * which I'm not 100% sure it was SimplePass

  @hpatricia

  Your enterprise class system uses a software Client Security (not SimplePass).

  Page of the site system Web pilot:

  Laptop HP EliteBook 850 G2

  The Synaptics (fingerprint driver) driver is in the category

  Driver - keyboard, mouse and input devices (5)

  Download Driver Synaptics and information Page:

  Synaptics WBF fingerprint driver

  

  The security software is in the category

  Software - security (1)

  Client Security download and information Page:

  HP Client Security Manager

  

  Load / install the fingerprint Synaptics first driver >

  Restart and sign

  Windows key > settings > accounts > Sign-in Options >

  Assign an identification number (Security Windows requires to enable the fingerprint reader) >

  Activate the connection of fingerprints

  Once the Windows PIN / fingerprint is activated, load and install the Client Security program >

  Restart and sign

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• HP Elitebook 840 NIC problem

  Strange question.  I have a 840 Elitebook with Windows 7 Enterprise 64-bit.   Once installed, I copied the driver on an external disk drive and installed the drivers.  All the drivers are installed with one exception.  When the driver of the CARD sets, the system hangs.  Any movement of the mouse, nothing.  I'm a hard cock down and restart and it freezes on the Welcome screen. If I reboot and go to Safe Mode (without network), it loads up.  I remove the driver and restart and it starts up fine. I searched around for the updated drivers and can not find.  Even the driver on the HP website is the same.   Does anyone have a suggestion?

  The company Win7 - 64 bit

  8 GB Ram

  Nothing else installed.

  Use the free version of this utility called WhoCrashed to see what specifically is the cause of the crash.

  Have you tried the old version of the pilot INC. found here?

• HP Elitebook 8470 laptop PC - graphics Intel HD 4000 - GfxUI has stopped working - Win 7 x 64

  Hello!

  Since I installed the Intel video driver and Control Panel 8.15.10.2712 22 June 2012 (sp57420.exe) - later recommended by HP.com pilot for my Elitebook 8470 p / OS, I get the error message "GfxUI has stopped working" when you click on "Options and support" in the Intel graphics card and the Media Control Panel.

  Everything works well except this problem, forbidding me to access this menu.

  Some details of my system:

  -Laptop: HP Elitebook 8470p B6P90EA #B10 (16 GB of RAM)

  -OS: Windows 7 Ultimate x 64 (service pack 1)

  -J' have Microsoft.NET framework 3.5.1 active (default value of Windows 7)

  -J' installed Microsoft.NET framework 4.5.1

  Some attempts at solving problems (with no success), I did:

  -Uninstalled and reinstalled video driver;

  -Microsoft.NET framework 4.5.1 uninstalled and reinstalled the driver video;

  Can someone help me to solve this issue, please?

  Here is the response from the INTEL Support:

  I'm sorry to hear that have had problems with the Intel graphics driver.

  This problem has been reported previously, and Intel has fixed with the new drivers.

  Please see the link below for more information on your problem:

  http://www.Intel.com/support/graphics/sb/CS-009483.htm

  Here is the link for the latest video drivers:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & DwnldID = 23405 & lang = eng & OSVersion = Windows % 207% 20 (64-bit) * & DownloadType = drivers

  HP will update this version of the problem driver too, based on the INTEL update?

• Recharge in question with Elitebook 6930p

  Hello forums HP, I had to come back here and you guys/girls ask a question on the Elitebook series and the battery not charging issue. I recently bought this laptop to replace the other two laptop computers HP garbage that we had here. The DV9005 was a total waste of money, and the compaq CQ50 wasn't much better either. This elitebook, however, was a more decent experience to use fortunately.

  Now this is not a brand new laptop, yet once just cannot afford to pay hundreds of thousands of dollars for a computer.  Anyone who does, well good for you.

  On the problem, when I got the laptop it didn't load or a hard drive adapter. I have a spare empty the drive to use and bought a generic adapter. A week later I ended up finding an official adapter brand by HP because I thought it was the problem.

  While using the generic adapter the battery would sometimes for free and sometimes no fees make about 97 to 98% and refuse any charges no load in addition, you use the adapter to generic China crap. I've tried everything I could think and followed the guides on the internet. Back in removing the battery, uninstall the drivers in the device, reboot without the battery Manager, then put the battery. These tactics were all hit and Miss and worked but only for a little while. I pulled the hard drive from the compaq system and used in this one before getting rid of Compaq. He still had the original install Windows on it and after all troubleshooting I thought hey "must have a problem with the old drivers of material to the old system, that the reader was.  So finally, I got an official charger (battery checked also great in the HP Battery Check software).

  So with the new charger, I formatted the hard drive and installed Windows 7 x 64 ultimate again. Then let the installer and Windows Update find all drivers, and with that the problem seemed to have disappeared.  I had to manually install some drivers, such as ATI and the fingerprint reader drivers (I don't use it however). It has now charged to 100%, but sometimes his didn't. By that I mean I have to let the battery discharge below 90% (89% and less) until the system takes care of the battery.  Is this normal? Should not charge the battery back up no matter what percentage the cells are to, or is it some sort of feature that I quite simply not aware of? Another thing is that sometimes the battery may charge very quickly, and sometimes drag on for hours. Also a high-pitched hum can be heard when it is loaded, as you can hear electricity do something. It's the best way I can describe it.

  I must point out that I have updated the bios and until recently was installed some (not all) of HP bloatware, like buttons to quick launch, battery check, the software Center of shit for the info on the quick launch Panel button. I don't have that sounds good, as many processes running for a single piece of hardware. I avoided all other apparently non-essential pilot updated on the HP site. The HP software all created about 7 quick launch buttons and the automatic update processes. I found this unacceptable and removed all of the HP software, the system works very well with it. The only thing that is weird is the battery and plugged her in State of charge do not. It load properly for days until what I removed software, even when she was only a few percentage points lower than the threshold 100% charged. Now it's back to the way it was under the generic charger, so I suspect that the generic charger works fine and something else is the problem.

  Is in charge of the HP software required for a normal and regular battery? If that's the case it's a bit concerning, when I buy a product that the product becomes my property not sellers more and the fact that your 3rd party software may be needed for normal operations is a slap in the face for consumers worldwide. While I appreciated the attempts of HP to automate and dumb down everything for users who do not know what that make them. You should consider that not everyone needs or wants that such automated support and good marketing system of the factory. Maybe in future models you will not install the default HP software.  The mouse pad has for example, a driver and a process for him. I can see for the process and it's okay to have because it's necessary if I want to use the track buttons built based on scroll, among other things. Connect the buttons to quick launch to load batteries (if that is what is happening here) has been/is a horrible idea.

  Please correct me if I'm wrong about all this, I'm waiting for you response to the issue of the battery charge and will provide more information if necessary.

  Hello @Britton1981

  To get your question more exposure I suggest you post in the trade forums since the [PRODUCT] is a commercial product. You can do this here laptop - HP ProBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE

  Support of your product page can be useful in the meantime: HP EliteBook 6930p basic Notebook PC model.

  I hope this helps!
  Thanks for posting on the HP Forums.