HP Elitebook 840 NIC problem

Similar Questions

• EliteBook 840 G2 - driver problem

  Hello

  I am struggling to find the drivers below.  I think I downloaded all the drivers available for Windows 7-32 bit of the system, and it is not the problem.

  Some research on Google, which leads me to believe that it could be something with the BIOS and Intel Smart Connect technology; However, I do not think this new Board of Directors has the ISCT and I've updated the BIOS and the problem persists.  Any help is appreciated!  Thank you very much!

  Can not find the drivers for "Unknown device" with the identifier material:

  {55BC022C-955B-4D87-A88D-D3E68CBEB2F4}\CT_27B961DB-3057-49BB-BD0D-ACA9FD8FF697
  ACPI\INT3397

  Fixed with this:

  sp70214.exe

  downloaded here:

  http://ftp.HP.com/pub/SoftPaq/sp70001-70500/sp70214.exe

  TITLE: NXP NPC100 close ground proximity drivers
  
  VERSION: 3.7650.10422.30 REV: C PASS: 7
  DESCRIPTION:
  This package provides the driver for the NPC100 near field of NXP Semiconductors
  Proximity module. This package is available for the models of laptops
  running a supported operating system.
  
  PURPOSE: Routine
  SOFTPAQ FILE NAME: SP70214.exe
  SOFTPAQ MD5: 1323767617399e02843f10bb484599f0
  REPLACES: no
  ENTRY INTO force: 23 December 2014
  CATEGORY: Driver-network
  SSM supported: Yes
  
  PRODUCT TYPE (S):
  Laptops
  
  MODEL OF PRODUCT MATERIAL (S):
  Laptop HP EliteBook 1040 G2
  Laptop HP EliteBook Folio 1020 G1
  Laptop HP EliteBook 840 G2
  Laptop HP EliteBook 740 G2
  Laptop HP EliteBook 850 G2
  Laptop HP EliteBook 750 G2
  ZBook 14 G2 HP Mobile Workstation
  Mobile HP ZBook 15u G2 workstation
  HP EliteBook turn 810 G1 G3

• EliteBook 840 G3: Two monitors and laptop screen problem external EliteBook 840 G3 and 2013 UltraSlim Dock (D9Y19AV #ABB

  Hello

  New EliteBook 840 G3 with discrete graphics and 2013 UltraSlim Dock using windows 10.

  I use 2 HP Z23n screen, there are connected with DisplayPort on Dock UltraSlim 2013 2.

  I have 1 questions with this

  (1) my 2 external displays connected to the 2 DisplayPort, started flashing then goes blank and returned once again without flickering. Very annoying. Seems that the graphics card a little reset on screen or the other from time to time. Tried to look at the logs without a bit of luck.

  Any ideas?

  2.30 firware link

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_165723_1 & lang = to & cc = us & hprpt_id = HPGL_ALERTS_1906111 & jumpid = em_alerts_us-us_May16_xbu_all_all_693375_1906111_DesktopsWorkstationsLaptopsandHybrids_recommended__.

• EliteBook 840 G2: EliteBook 840 G2 - SCCM 2012R2 driver problem / OSD

  We have a System Center R2 2012 with Elitebook 840 G1 environment works fine with the deployment of the operating system. However, our G2 models is not able to present the same task sequence that it restarts on the 'Preparing network connection' part of the WinPE Startup.

  We injected the most recent pilot network to download the drivers to hp.com and driver still more recent intel.com (both drivers judged separately) to the boot image.

  The driver is (even though I'm aware that the chip is now called 218, it still bears the name of the 217 driver):

  Intel(r) Ethernet connection I217-LM

  tested versions:

  12.12.80.1950

  12.12.80.19

  How can we solve this?

  I answer my own op, in case someone else might have trouble with this:

  This man was right! (see LINK below)

  For deployment of HP EliteBook 840 G2 with SCCM 2012 R2 Windows 7 , you need the driver for Windows 8.1 and newer OS' are injected to the boot image (not the Sysprep one).

  Dmitri Bobko in EBLEND THERE credit, to see what was not exactly obvious. And thank you so much for this ad on your blog!

  http://blog.eblend.ca/2013/11/hp-elitebook-820840850-and-probably.html.

  BTW, I download the driver of the Intel.com CARD to make sure I had the latest possible driver for Intel(r) Ethernet connection I218-LM.

• EliteBook 840 G2: USB3.0 driver for Elitebook 840 G2

  Hello

  I use Elitebook 840 cell G2 and Setup driver USB3.0 (file: SP69862). However, the software poped error message (the Installer failed to install one or more device drivers) at the end of the installation. You can reference attach the file Setup log in link here.

  Please help me solve this problem. Thank you!

  Hello:

  See if the driver directly from Intel works...

  Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-C220-C610-chipset-family

• HP EliteBook 840 G3: Why BIOS version 01.07 (sp76235) is pulled? (G3 EliteBook 840)

  Anyone know why the BIOS version 01.07 (sp76235) for EliteBook 840 G3 is taken?

  Link to the BIOS:
  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_167436_1 & swEnvOid = 4054

  The date is 1 January 3000 so he has obvisoly something wrong and HP do not want to install, I have deployed it to a large number of machines and would like to know what kind of questions, it is hoped.

  A new version 01.10 came out with these fixes:

  -Fixes a problem that causes the display to become visually distorted (flicker).
  -Fixes an issue where a system running Windows 7 with active hard drive encryption is unable to power (boot) after the BIOS is updated.
  -Prevents the BIOS downgraded below the 1.09 version.
  
  NOTE: After loading the BIOS version, older versions of BIOS may not be installed.

• HP Elitebook 840: Can how SSD I use to replace my current HARD drive?

  My HARD drive is starting to become a little slow and I want to move to an SSD. I borrowed an empty SSD with a friend to test the speed, but it does not appear in the BIOS. It is a standard Samsung SSD that should work. Is there a problem with my computer or it's compatibility with the SSDbrand or the type problems?

  I am also looking in the upgrade from 8 GB to 16 GB of ram, can someone connect 1 stick of 8 GB of RAM that is compatible with my computer without having to replace the current 8 GB key.

  SSD, I used: Samsung SSD 840 PRO 128 GB (model number: Z-7PD128)

  If you are recognizing my help please consider giving me the 'Thumbs Up' and clicking 'Accept as Solution' if I solved it your problem.

  Hi Devmarti,

  Your hard disk Samsung SSD should work on HP Elitebook 840 G1 as long as he uses the SATA port. You can check the video below to perform the duplication of the OS on your new hard drive before replace you youtube.

  How to set up your SSD

  Step 1: https://www.youtube.com/watch?v=z1GqasEpZ7s

  Step 2: https://www.youtube.com/watch?v=KNJ8b4IeKWE

  How to replace the hard drive: https://www.youtube.com/watch?v=-5ibaLeO4cU

  To upgrade the RAM, you can buy a SDRAM DDR3L, model 1600 MHz.

  I hope this helps. Thank you.

• EliteBook 840 g 2: boot usb

  Hi gurus

  (A)

  I would like to make it bootable usb win 7 pro x 64 FIX;

  laptop is not equipped with an optical drive.

  (B)

  I have a windows to go drive hard usb3 workspace to another laptop (win 7 x 64 home prem);

  MBR, NTFS, single partition;

  works when it is running on x 64 pro win8; works by operating on Vista x 86 ATU;

  does NOT (cannot start) on elitebook 840 G2 win 7 x 64 pro;

  thnx in adv

  SPC

  @synpc

  Hey there!

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I understand that you can not boot from USB.

  Try a few steps recommended below.

  A. Click Start in the search box type CMD.

  Right click on command prompt and select run as administrator

  Run diskpart utility by typing diskpart in the command prompt window and press "Enter."

  Find your USB drive disk number by typing disk list. We assume that the USB drive is 1.

  Run the following commands:

  Select disk 1

  clean

  create the primary partition

  Select partition 1

  assets

  format fs = NTFS

  Assign

  output

  Now, we have prepared a USB drive. Let's make it bootable:

  Insert the 32/64-bit installation disk in the Windows 7 DVD drive. Assume that it is D

  Go to D:\boot (cd d:\boot)

  If your USB drive letter is "e" Please run bootsect/nt60 e:

  Copy Windows 7 DVD multimedia content in root USB (etc. do not put in any folder) folder

  You are now ready to install Windows 7 from a USB key!

  B. you said that you are unable to boot from a flash drive on 840 G2.

  Turn on your computer, keep tapping key F10.

  You will start in the BIOS change the inheritance of secure boot startup option.

  Save the changes and exit the BIOS.

  You should be able to boot from the flash player now.

  Let me know how it goes!

  Have a great day!

• EliteBook 840 G2: Elitebook after Windows 10 Upgrade keys does not

  Hi on board,

  I'm a 840 Elitebook brand new last week with Win7 and directly upgraded to Win10 64-bit yesterday. It works although until now unless there is a big thing, some keys (FN + F9 for example) are not executed. You know, those little keys most of us use a lot to adjust the brightness or volume.

  In my case, there is the problem with FN + F8, F9 and F10 (off mic, down screen brightness and the brightness of the screen to the top). Other keys work fine (for example, volume).

  Someone at - it a specific link to a Win10 driver for this problem. I was looking on the half-hour but can't find anything (especially not the solution for Win8 proposed with the hot key driver). It might be my problem due to the fact that I'm not used to the new page from HP.

  Any help is appreciated a lot,

  Since the Switzerland

  Hello here is the driver for the keyboard shortcut support, you can try on Elitebook 840 G2:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7343205&swItemId=ob_142323_1&swEnvOid=4132

• HP Elitebook 840 G1: HP Elitebook 840 G1

  I'm almost done with this thing.

  I bought this HP EliteBook 840 G1 offshore from a friend who really takes care of his business. The laptop is dust free and looks just out the box. It is originally with Windows 7, but I decided to upgrade to Windows 10 because he was free and promised many new features. Everything was ok with the occasional bug (audio does not, fingerprint reader not to read), but a simple reboot usually covered the problem. Yesterday, I got set up a complicated Movie Maker project and type 2 separate school trials when the indicator wifi on the Elitebook turned orange and wouldn't connect to the wifi. I have saved my work and restarted my computer to find "error 3F0 - please install an operating system on your hard drive. So I had to wipe the drive, install Linux Ubuntu, and here I am with several weeks of work lost and an unpredictable old 2 year for laptop. Extensive BIOS tests show the hard drive and memory have "PAST".

  I'll assume it of Windows 10 because the cell phone was fully functional on Windows 7 and works great on Linux Ubuntu 16.06. The reason why I write this is because I don't have Windows 7 to install on the device. I have the product key original on the bottom of the computer, but on the official Windows 7 download page software, he told me to contact HP support.

  Any help with a .iso Windows 7 Professional x 64 link would be amazing. Again, I have my own product key and I can use Rufus to make it bootable from my USB. Thank you.

  Hello:

  Microsoft has pulled all the links legal download of files Vista and W7 ISO unless you have a valid product key commercial complete to enter this Web site.

  The product key on the bottom of your laptop is an OEM key, not a retail one.

  If you live in the USA/Canada, call HP at this number to order a set of W7 Pro x 64 recovery disc.

  Have the serial number of the PC handy to give to the customer service rep.

  1-800-334-5144

  A set is expected to cost about $10 shipped by first class mail.

• EliteBook 840 G3 Notebook PC: Windows 7 RAID Driver for laptop HP EliteBook 840 G3

  Hello!

  I got a (currently non-prepared) new HP EliteBook 840 G3 Notebook PC I want to drop Windows 7 (64-bit) enterprise on.  But while trying to configure the operating system via a USB stick or a DVD - ROM drive, I get the following message from the Windows installation after you click 'Install now':

  "A required CD/DVD drive device driver is missing. If you have a driver disk, CD, DVD, or USB flash drive, please insert it now. »

  If one of your great technicians could direct me to where is this driver and how to install it, I would be very grateful.

  Thank you

  Nick

  Hi, Nick.

  The problem with your laptop is Skylake chipset and lack of USB3 drivers in your windows installation media.

  Skylake chipset does not have USB2 support until after you have installed the chipset driver.

  The solution to your dilemma is to run this tool on a PC with W8.1 or W10.

  There is a readme instruction link (found in the section release notes), which will provide you with the information that needed to get the W7 to install on your PC.

  https://Downloadcenter.Intel.com/download/25476/Windows-7-USB-3-0-creator-utility

• EliteBook 840 G3: Installation of Windows 7 x 64 Enterprise | EliteBook 840 G3

  Hello world.

  Need help to install Windows 7 x 64 enterprise in an EliteBook 840 G3. The installation disc does not recognize the HARD internal disk (in bios is recognized without problems). I ve tried to join the AHCI drivers for chipsets intel in the Windows AIK installation disc trhougt. But the hard drive is still not recognized.

  Someone had the same problem?

  Hello:

  Intel has removed support for USB 2.0 chipset chipset Skylake.

  This means that only USB or normal DVD installs windows 7 will not work.

  Microsoft Windows 7 ISO not the USB 3.0 drivers natives either.

  Therefore, add USB 3.0 drivers in Windows ISO.    Intel has on it.  They have a utility that does all the work for you.

  https://Downloadcenter.Intel.com/download/25476/Windows-7-USB-3-0-creator-utility

  Run the utility and point your support Installation USB and windows 7 above should install.

  There is a readme on the link above for instructions on how to convert your DVD in a bootable usb flash drive.

• EliteBook 840: unable to boot from usb flash

  Hello:

  I'm tempted to boot from USB drive to install a new version of Windows 7. When I press F9, I have only two startup options:

  -Computer portable hard drive

  -Computer laptop Ethernet

  The USB boot option do not appear.

  My BIOS Version is: 01.04 worm. M71 (24/02/2015)

  Note: I tested my USB key installation in the other laptop and it works very well.

  Thank you for your support.

  cherrera51 wrote:
  

  Yes, I know Rufus. How I said, I tried my USB in another laptop (a HP ENVY m4 laptop) and work very well. The difference is that the HP ENVY gave me the option to boot from USB and the EliteBook does not.

  I realized that, since the post, you did.

  I suggested RUFUS and EFI create setup of windows due to the startup problem, that you have with the Elitebook 840.

  It may be just what you need for this particular laptop.

  If you want this to work, then you must be flexible and willing to solve the problems.

• HP Elitebook 840 G1, G2, G3: Showing empty HP 2013 Ultraslim Docking station

  * It seems to connect has a new dock in a configuration that we already know works fixed whatever issue the dock. After connection to a working configuration, we can move to some other computer/editing we need to, and it continues to work. Not a real solution irritable, but it seems to work.

  When you try to use an adapter Displayport to VGA or DVI DisplayPort cable / to connect a HP 2013 Ultraslim Docking station to an external monitor, the screen comes up with no signal and goes to sleep. Connection with a VGA cable, it works very well. We have been able to reproduce this problem with several new, fresh out of the box docking station. The problem occurs on all monitors that connect us, even those who work with the other Docks to see.

  It seems to be the topology of Displayport Intel is picking up on the screen and making it so that the displayport cannot be enabled without connect 3 screens.

  The old version of the Ultraslim Docking station that had 1 displayport seems to work very well, it's just the most recent version 2013 which has 2 displayports who has this problem.

  Does anyone know if there is a newer firmware or where I can disable/stop the topology Displayport to pick it up a monitor and try to do 3 screens? If this isn't the case, we will probably have to go back to USB adapters and those who are no funny.

  Thank you

  Andrew

  System information:

  HP Elitebook 840 G1, G2 and G3 (question took place with all 3 models).

  Windows 7 Enterprise x 64

  Ultraslim 2013 HP docking station

  Dock Firmware 2.30

  Update USB, Chipset and graphics drivers to the latest version of the HP Web site.

  Hi @Andrew-CF -,.

  Thank you for posting on the Forums of HP, the issue you have with this HP Elitebook 840 is classified as a commercial product (business).

  Our sales support team provides support through this platform.
  If you need immediate assistance, you will need to open a session one business with our sales support team.

  Please click on this link: http://www8.hp.com/us/en/contact-hp/business-support.html for more details and support.

  Let me know if you want more information and/or assistance.

  Kind regards

• EliteBook 840: F4 key takes computer to lock screen [number of absolute reference in Excel]

  Hi all

  Here's the question I have that I noticed on my laptop Elitebook 840, Windows 7 64-bit business management.

  When I click on F4, it takes the computer to the lock screen. Normally this wouldn't be a problem, but there is a problem, because the F4 is the key in excel which is supposed to provide absolute references to cells or the "$", as many know. It has all the ineffective because now I have to type the $ manually and I do not know why it is like that.

  I already tried the bios for the Fn keys option, but it just made my Fn key wont work at all, so I had to undo this change. I looked in the bios, but could not find anything else specifically associated with the F keys, let me know if I missed something.

  Just knowing this is what happens:

  F4 - any application/program - sends me it to the lock screen

  FN + F4 - give me the prompt to a different display for multiple display configurations configurations - works as expected.

  CTRL + F4 - closed the active window (yes I did completely during this first strike), as expected.

  ALT + F4 - same as ctrl f4, also as expected.

  AFAIK there is no any other combination of F4 there, and I really prefer not having to press something with F4, whenever I make an absolute reference. I also looked in excel, but saw no option.

  Finally, it is a work computer, but I guess that our IT guys do not always use Excel, as he seemed to have little interest to fix the problem, but I don't have the ability to actually download things (like a hotkey regedit) or the software assistant HP, nor I would want to take the risk of malware (from a 3rd party) or addition of bloatware (from HP) on my new work computer.

  Any help that can be offered would be appreciated.

  Respectfully,.

  Michael

  Hi all

  I found a solution, which is probably pretty specific to my business, but in case someone of another company uses HP laptops with the following software, it might be something interesting to look at.

  Our company uses Imprivata Agent as a single sign - on a keeper and there was a glitch or user access issue which eventually cause F4 lock the computer screen. Once my COMPUTER service has been able to reinstall and reconfigure my rights on Imprivata the problem disappeared after a few business days, and F4 is finally working right.

  So if you're having for my specific problem and typical bios option does not work for you, then perhaps check some other incompatible software.

  Respectfully,.

  Michael