Elitepad 900 window 8 reload

Similar Questions

• Elitepad 900: Windows 10

  While improving my Elitepad to Windows 10 900, it turned off in the process (he says he should reboot several times), but never turned back.  Now, the tablet will not illuminate at all (nothing happens). I unplugged and tried to start on battery, no luck. Reconnect the power supply, again no luck.  If anyone else has experienced this problem and is there a solution?

  Hi everyone, I thought about it.  I remembered talking to HP a few years there on the tabley do not start the system and he told me what to do.  You hold the power and volume button up to start.  I did it, it would start said it was an error in the installation of 10 and then re-installed Windows automatically go back to Windows.  The re-intall seemed to work.  Check my files programs, etc. and did not find any problem.  Will stick to 8.1.

• Elitepad 900: Windows 10 - Elitepad does not start

  During the upgrade of Windows 10 on my Tablet Elitepad 900, firm upgrade my Tablet and never restarted.  Now when I try to start nothing (literally nothing happens).  I tried on power sector and battery and receive nothing.  This happened to someone else and is there a solution?

  Hi everyone, I thought about it.  I remembered talking to HP a few years there on the tabley do not start the system and he told me what to do.  You hold the power and volume button up to start.  I did it, it would start said it was an error in the installation of 10 and then re-installed Windows automatically go back to Windows.  The re-intall seemed to work.  Check my files programs, etc. and did not find any problem.  Will stick to 8.1.  Come on Microsoft, he meets!

• Elitepad 900 Windows 8.1 WLAN problem

  I have several Elitepad 900, model number is D4T16AA.

  Recently ugpraded to Windows 8.1 Enterprise using Microsoft Enterprise Agreement media, works as a full clean install (not an upgrade on the spot). All updates to existing Windows were then applied on top.

  Now the WLAN has stopped working. The WLAN interface seems to be upward, but it says 'No networks detected' - of course, there are networks on the site: at least four of us, as well as a few edge com the roundabout.

  I installed the latest driver from the support site (SP64649 that's as far as I know - correct me if I'm wrong). No joy.

  I found this article: http://www.shcherbyna.com/?p=2113 and I downloaded and tried all the older versions of the driver mentioned here - SP60450, SP60664, SP60901, SP61232. In any case, I uninstalled the device, rebooted, installed the old driver and restarted. In all cases, the results were the same - 'no network not found. '

  Please can someone confirm what version of the driver will actually work in this machine?

  I lose a lot of time trying different things, surely it should "work", WLAN is no longer rocket science.

  Thanks in advance.

  I see that you have already tried a lot of possibilities, but I would suggest a few steps:
  (See victory unity 8.1, 32-bit)
  1: Please uninstall the wireless completely from the device driver, restart the device and update driver wireless sp64649 using link below:
  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5298035&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_127781_1%257CswEnvOID%253D4157%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken
  
  2: Please download the latest "BIOS settings" using link below:
  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5298035&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_127435_1%257CswEnvOID%253D4157%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken
  
  3: Please restore default BIOS.
  
  4: If above steps do not solve the problem, it could be a faulty itself WLAN card
  
  Although I am an employee of HP, I speak for myself and not for HP.
  
  -Say 'Thank you' by clicking on the star of congratulations in the post helped you.
  -Please indicate the position that solved your problem as "acceptable Solution".

• secureboot elitepad 900 Windows 8.1

  Hello

  I upgraded my Windows to version 8.1 (build 9600) today on my HP Windows Tablet. Now, Windows in SafeMode with message error secureboot not valid loading settings. How can I solve the problem with secureboot on my HP Tablet?

  The HP Bios settings icon is no longer available.

  Kind regards

  VAD

  Hi Revenger red,.

  Please follow the link to microsoft for a fixed number.

  http://support.Microsoft.com/kb/2902864

• elitepad 900 running slow on windows 10

  I have improved my 900 to 10 pro elitepad 32 bit of windows.

  the upgrade itself that has is passed smoothly, all the data/program were kept, quite impressive.

  Nevertheless executing windows 10 makes the Tablet works very slowly even after the end of the updates/patches and several restart.

  -l' overall interface is slow with delays between action and results

  -the menus are slow, the Tablet seems to use the drive too

  -watching a regular movie mkv/avi is very slow/ectic/cut - weather I use the new app using VLC Office or modern tv.

  -l' screen is not really turn off Hibernate, the retro-lightnigh/backlight remains lit unless a stop

  I did a roll back to windows 8.1 (super smooth, yet once very impressive) and performance is back where it was. Movies are smooth, the interface is fast...

  frustrating - have you noticed the same thing?

  I wanted to share the following with you - I had the problem of the screen backlight until I finished the following 10 Windows:

  Visit the site of HP support and access to the Elitepad 900 downloads for Windows 8.1.  Download the update of the driver/Firmware/BIOS ElitePad 900 (SP71504).  Run this update - the element that will be your problem is the Intel GMA driver included in this update.

  The question is 'Microsoft's basic graphics card"which is installed by default.  This graphics card also seems to have caused problems in other devices as well - if it is not necessarily a problem of HP.  I guess that there will be a stand-alone Setup program Windows 10 Intel GMA - but I couldn't find one for install - of course that does not mean it is not there.  The package of 8.1 installation above took place without problems on my device and the display number no longer existed.

  Just a note, Microsoft is having similar problems with Surface features.  They have users update the display driver to resolve the problem.

• HP Elitepad 900 G1 - problem with built in SD card reader.

  Hello.

  IM was a proud owner of HP Elitepad 900 G1 up to the point where I tried to put a 8 GB miniSD card in to built in card reader.

  The map was visible in the windows Explorer 8 for 15 seconds. Then he disappeared.

  After a long battle with drivers, internet solutions etc (nothing worked btw.) I ve installed windows 8.1 update.

  It still does not work.

  My card works perfectly in all the other electronic stuff (laptop computer, mobile phone).

  Can someone help me?

  I think I solved this problem. (Sorry for my English but I'm Italian).

  The solution is very simple, I tried several times and in my opinion, it works.

  It is necessary only to disable 'Quick start' options in Windows 8 / 8.1

  -WIN + X key, then go to 'Power Options'.

  ' - 'Choose what the switch / do"(click on it)

  "-"Change settings that are currently unavaiable"(click)

  -In 'settings Shoutdown', uncheck the 'enable quick start (recommended)'.

  Please tell me if it works for you.

• Elitepad 900 microsd card not detected

  I'm having a problem with the use of the microSD integrated on the HP ElitePad 900.

  The Microsd card works on my laptop and works on the ElitePad when using the jacket of the expansion.

  When I insert the micro SD card into the microsd slot on the back on the Elitepad next to the 3 G SIM, Windows 8 does not detect the card.

  I'm using a Kingston 32 GB SDHC card.

  I solved this problem by buying a Kingston 64 GB SDXC card. This card works perfectly.

  I don't know what's the difference between a card SDHC and SDXC card, in addition to speed? The ElitePad seems to be only able to read a large map if it is SDXC.

• Elitepad 900 won't turn on without power in socket

  Hello, I just got an elitepad 900, it works very well when I power is still plugged in and also when the power cord is connected almost in (just a little bit in which he dosnt fresh but it is always plugged.)  but the second that I remove the power cord completely, she stops and I can not activate it until I plug the charger again...
  
  I don't think it's the battery because there is a lot of power on it and when the charger is plugged in barely there dosnt fresh and the Tablet still works.
  
  Hope some of you can help me

  @jofftheman

  Please use the Forum from HP Support. I brought your question to the team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).
  
  If you are not familiar with messaging private forum please click here to learn more.
  
  Thank you
  Omar

• question: How can I format my hp elitepad 900

  question: How can I format my hp elitepad 900

  Hello ahmapeace,

  Your ElitePad 900 is a business model.  Your question would better answer on the HP Enterprise Business Community Forum

  Good luck!

• Elitepad 900 problems with wi - fi - limited connectivity networks

  Just bought the Elitepad 900 32 GB, Win 8 Pro 32-bit.

  I have a problem connecting to my network wi - fi. It is an open network - anyone can connect; I managed to connect my smartphone Galaxy S2 with no problems.

  Once the connection is established, I receive a "limited connectivity" and not internet access. When I 'fix' the network connection I get some more connected time and then it happens again.

  The diagnoses that presents 'repair the network connection' is: predefined lack gateway and bad IP configuration (I think that - because the language of my pc is not English).

  I installed the latest drivers running the .exe directly (as an administrator) and also the Softpack Manager.

  The problem remains.

  Also, when I use the Softpack allways get an error... it telling me that there is a new version available.

  Has anyone ran into this problem?

  Thank you

  Best regards

  Diogo Assunção

  After struggling around this problem, after most of the suggestions that you left, update to the latest released HP wi - fi driver, change the power adapter settings, rolling back to previous versions of drivers...
  I decided to google for Qualcomm instead of HP drivers.
  I found this one: http://drivers.downloadatoz.com/vendor_atheros_type_network-card/415775, atheros-ar6004-wifi-adapter-3-7-0-206/

  Then, I uninstalled the device in Device Manager, rebooted, looked for new devices and used the driver that I downloaded.

  He worked for longer than ever before. Updates in the next few days.

  Thank you all for your answers
  Best regards
  Diogo

• ElitePad 900: 900 Elite will recognize is no longer keyboard Bluetooth after Windows update 8.1

  I have a HP Slim Bluetooth keyboard (product No - H4Q44AA #AB) tht, I was pairing with my HP Elite 900 with much success until I did an upgrade to Windows 8. 1. now I can not use the keyboard wireless at all.

  I even tried to use a different wireless keyboard, and it's the same thing.

  I tried to uninstall the keyboard.

  I followed the instructions on the web site Mixrosoft to ensure Bluetooth is turned on for the Yes, however it doesn't seem to be a bluetooth driver at all now. He was obviously happy that I was using the bluetooth keyboard.

  Pleas ehelp... get out of my mind and wasting hours trying to get this working.

  Have you updated to 8.1 Windows drivers, BIOS, etc.?

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5328403&swLangOid=8&swEnvOid=4157

• elitepad 900. После обновления windows 8.1 dizinine светится экран и быстро садится батарея.

  ДОБРЫЙ ДЕНЬ.

  Обновила систему dizinine win 8.1 и теперь экран, при выключении полностью не отключается и немного подсвечивается его.

  ИЗ ЗА ЭТОГО 'ПОДСВЕЧИВАНИЯ' БАТАРЕЯ БЫСТРО РАЗРЯЖАЕТСЯ.

  ПОДСКАЖИТЕ, ЧТО ДЕЛАТЬ? МОЖЕТ ДРАЙВЕРА КАКИЕ ОБНОВИТЬ?

  ОТВЕТ ПРОШУ НА ПОЧТУ ОТПРАВИТЬ.

  СПАСИБО

  ВАША СИСТЕМА МОЖЕТ ПОТРЕБОВАТЬСЯ СБРОСИТЬ (НАДЕЮСЬ, ЭТО ПОМОЖЕТ)

  Попробуйте эту ссылку

• HP Elitepad 900 mobile broadband

  Hello

  I need to set up the mobile broadband on my G1 900 elitepad.  It is running Windows pro 8.1 and all the firmware is up to date.

  I have install a 3gSIM (Orange), but it is not detected. When I check against the list of devices, I see mobile broadband.

  Ideas on how to install would be appreciated.

  Simon

  After several searches, I discovered that the model I have is not with the modem broadband installed as standard.

  Very annoying, because it limits the use of the tablet.

• Wi - Fi Elitepad 900 died after you have installed the latest driver Atheros HP.

  The Wi - Fi on my 900 Elitepad (Win 8, 32-bit) works well in the past.  But recently, I am constantly Wi - Fi 'limited connection' and that 'no connection' emits intermittently.

  And I went to the download page of the HP driver, installed the last "Qualcomm AR6000 Driver Atheros Wireless LSN series" (SP61232, ver.3.7 of March 22).  After installation, the Wi - Fi connection goes dead.

  In the lower status bar, the Wi - Fi icon is always displayed with a red & white and does mean 'no networks detected'.

  In the section 'wireless devices' menu 'Settings of PC' Win 8, the Wi - Fi button disappeared altogther, even if she was still there before the update of the driver.

  In the "Network connections" window of Win 8, the Wi - Fi icon is displayed as 'active', but a better connection returns the message that "there could be a problem with the driver for the wireless adapter.

  In the "Device Manager", the Qualcomm Atheros AR6004 adapter shows that everything is normal and work, even if it is obviously not.

  For the 'ipconfig/all', the Wi - Fi section does not even appear in the result.

  I've uninstalled and reinstalled the old and new Wi - Fi drivers several times above, but Wi - Fi is still dead.

  Help, please.

  Problem solved!

  I had to uninstall all the drivers Atheros Wi - Fi in the Mode without failure Windows, restart, then CNettoyez in the normal Windows mode, restart, and then finally reinstall the latest driver in Mode Windows safe.

  Now the Wi - Fi is back running.  But I have to check if the Wi - Fi BOUNCING 'limited connection' or 'no connection' not coming back or not, with this latest HP driver.

  It must be one or more of the following applications installed that prevented the WiFi driver install correctly in the first place:

  The AVG antivirus,

  ZoneAlarm firewall,

  CNettoyez,

  Malwarbytes anti-malware.