ElitePad 900: 900 Elite will recognize is no longer keyboard Bluetooth after Windows update 8.1

Similar Questions

• Windows XP will only start in safe mode after Windows updated 09/02/2011

  We have seven Windows XP SP3 computers.  All are set to download/install automatic updates every day at 03:00.  Today, one of them does not start in normal mode.  When the user arrives at 08:30, screen was black and would not, if power to monitor and PC were in.  The user powered PC turned off/on.  He came normally too far that the screen blue, just before the login box appears, sucked to boot options.  Boot in safe mode and safe mode with networking mode.  Restart in safe mode after shows the same result.  The event log shows a SaveDump:

  Event type: Information
  Event source: Save Dump
  Event category: no
  Event ID: 1001
  Date: 09/02/2011
  Time: 08:30:01
  User: n/a
  Computer: TOTB-02
  Description:
  The computer was restarted after a bugcheck.  The bugcheck was: 0x1000007f (0 x 80042000, 0x00000000, 0x00000008, 0x00000000). A dump was saved in the: C:\WINDOWS\Minidump\Mini020911-01.dmp.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Installed updates: KB2393802, KB2476687, KB2478960, KB2478971, KB2479628, KB2483185, 2485376

  Word and Excel will not run.  The office is OpenLicense.  Says can not verify the license for this application.

  Thank you

  aDaniel

  A suggestion: as stated above, I thought I was wrong this posted in the Windows 7 Forum.  In fact, the link under XP for updates takes you to the Forum Windows 7 > Windows Update.  It seems that it would be less confusing, if questions update go to a forum, out of Windows 7 and Windows Update as a stand-alone speaker.

  Thank you for all your help,

  aDaniel

• Hi I am trying to install updates, and they will not install an error found Code 643 Windows Update encountered an unknown error

  Help

  Tracey,

  http://support.Microsoft.com/kb/555375

  You can watch the following article to see if this will help with the error 643.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643 

  http://support.Microsoft.com/kb/946414

  During the installation of .net Framework updates with Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982>

  If no joy, of the article in the Knowledge Base for ALL the .NET security updates:

  "How to get help and support for this security update

  For home, users visit Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For enterprise customers, support for security updates is available through your usual support contacts. "

  Let us know if this helped.

• Lightning will not rise after Windows update 10

  My computer came installed with Windows 7 Professional 64 bit. The computer has a Thunderbolt 2 interface. I loaded the software and the drivers were mounted and worked a lot their use in Garland.

  External drives are USB 3.0 and LaCie thunderbolt. The computer was shipped with the HP security software. I did the upgrade to Windows 10; in the Windows dialog box update, said could not be updated without removing the HP security. I said yes, and since that time, readers not only mount.  After the update, and readers would not mount. I then used system restored and returned the computer to Windows 7.

  When I tried to reload the drivers for LaCie drivers, I get cannot lack of file sysInfo.dll. I download this file, place it in the system 32 folder. After a reboot, I tried and the pilot program installed. However, readers will not rise. I contacted HP and they remote connected to my computer, BIOS update installed, chip set drivers and still drives don't mount not via the port of Thuderbolt2.

  They run a lot when it is connected to the USB 3.0 port. My logic is readers are very much like the mount and run fine with USB 3.0, but is no longer the mount with the crush. I am a photographer and work with large files often 1 GB or more. Thus, the impact of lightning speed is desired.

  I have the drive Professional OEM Windows 7 SP1, however I have a large amount of the image installed and that you hope to find a way to solve this problem without the operating system reinstallation and all the photo editing programs. A pre thank you for everything that helps her.

  Hello

  Thanks for posting your query on the Microsoft Community.

  Method 1: Run System Maintenance troubleshooting

  I suggest that you click on the link below and run the hardware and peripheral troubleshooting tool by following the steps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Update storage controller drivers

  Follow the steps below.

  1. press the Windows key + X , and then click Device Manager.

  2. expand storage controller.

  3. right-click on the driver and select Update driver software.

  4 reboot your system.

  I hope this helps. Please respond if you have related research.

  Kind regards

  Jesinta Rozario

• Elitepad 900 now will not even turn on.

  Hello.  I posted a two-part question, a week or two back.  No responses.

  Now the Tablet does not even start.  Zip fastening.  Black.  No response.

  Is it possible to use the thing connector to connect to my laptop and "read" in this way?  Using the power of the laptop, what is?

  Only had this thing for December and use it only for one thing (read/store my Zinio mags) is not as if he's been hammered by day in a business environment.

  Clues?  Unfortunately I am currently in Italy till coming December when I go home to Oz for Christmas.

  Hoges

  Hello Hoges,

  Subject of your question to connect the Elitepad directly to another PC via the USB port.

  Given the Tablet is a complete windows PC, you do not connect directly to another PC via the USB port.

  Androids and iphones from Apple, etc. etc. are different from a windows PC. Even if you used a usb OTG cable.

  Windows PC can be connected via a crossover cable, but it is very specific and requires a port ethernet on both machines.

  You can connect via a network, such as the connection via a group of home via a wireless connection.

  Even better, you can back up your files on a service like Dropbox cloud, Onedrive or Google and then upload them to another machine. If both computers use Windows 8.1, you can use HP Connect to backup and transfer files.

  If you have a micro usb usb adapter, you can use a USB for file transfer with.

  I don't know anything about magazine articles you download, but if made via an application in the Windows store, those who could not be redownloaded in any case without transfer?

  IF the Tablet is still under warranty and the loading port is loose, you can contact HP Support to see what your options are.

  It will be useful.

• Computer will recognize is no longer my external HARD drive

  Original title: device notrecognised

  I have a WD external hard drive. It was working properly until a few days, but now none of my computers recognize it. No message is displayed.

  When it is attached to the computer, it shows that the driver is installed and ready to use, but the device is not visible anywhere. I have a unable to locate in "My Computer".

  I have a lot of data stored in this and cannot do without them. Help

  Hello

   
   
  1 did you do changes on the computer before the show?
  2. which version of the operating system you are using on the computer?
  
  Method 1:
  

  You can check if it is detected in the managememnt disc.

  Method 2:
  You can check the Device Manager and see if the computer detects any error message.
  a. Click Start.
  b. management of devices of the type in the search box, and then open it.
  c. check that the device is listed there.
  d. right-click on the device, and then click Properties.
  e. under the general tab, check the status of the device.

• My BDDVDRW drive will recognize is no longer read the audio CD, but both DVD and BD

  I have a HP pavilion dv6 under Windows Home Premium with a HP BDDVDRW CT40N. I have never had any problems with the optical drive. About 2 weeks ago, I started ripping of audio CD on my hard drive using Windows Media Player. I pulled about 15 CD over the 2 weeks. Then all of a sudden the drive read audio CD - I put a CD in and nothing, even after hours. If I click on the player it ejects and answers please drive inset.

  So I thought it was the CD and inserted other CD, even the ones I had just ripped - nothing. But it reads the DVD fine; I just saved a DVD with it.

  The machine is about 5 years old, but it works well, so I thought maybe it was the reader. I have another computer; It only a little more than a year, with a HL-DT-ST BDDVDRW CT40N and running Windows 10. I started to rip from CD with this computer also with Windows Media Player. Guess what - same thing.  I was able to extract only 3 CD before he showed the same symptoms: can't see CD; no problem with DVD.

  Finally, I went to my wife's computer, a different HP running Windows 7 with a DVD - RW disc. This time, think of some sort of virus or malware may be responsible, I made sure that there was no Internet (not ethernet WiFi or Bluetooth). I ripped a CD and then the same thing.

  All three computers has failed using different CD - it wasn't the same CD that was torn apart last before failure.

  I doubt very much that three different computers with different symptoms of operation and different readers might undergo the same material unusual problem in few days after execution of the software even on different CDs. There must be something about the use of this extraction software (Windows media player) or disk characteristics of driver that blocks the CD (apparently after extraction).

  I'm only moderately tech savvy, but successfully, sometimes after a considerable effort, more than anything I tried. I have had no success with this (towards even a problems prior restore point) and am at a total loss.

  Help, please.

  While they inspected, CD is not detected by the computer. You can do the following steps the solved the problem.

  1. Scan of the SFC
  • Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
  sfc/scannow

  2. run the disk check in Windows 7

  • Open the Start Menu and click on the button of the computer on the dark right side.
  • Right-click the hard disk you want to check, and then click Properties.

  3. click on the Tools tab and click the check now under error checking.

  4. you will now see this window. Follow the steps below for what you want to do.

  5. to only scan the disk for errors

  Note: This will give you just a report if there are drive errors or not and will not attempt to correct.

  • Let off both boxes, and then click the Start button. (see screenshot below step 4)

  6. only scan and try bad sectors recovery

  Note: this analysis tries to find and repair errors on the hard drive itself, physical and it may take much longer to complete.

  • Uncheck the automatically fix file system errors . (see screenshot below step 4)
  • Select the search for and attempt recovery of bad sectors .

  7. only scan and trying to automatically fix errors

  Note: This will automatically attempt to repair problems with the files and folders that the scan detects.

  • Check the automatically fix file system errors . (see screenshot below step 4)
  • Uncheck the search for and attempt recovery of bad sectors .

  8. to analyze automatically try to fix the errors and bad sectors recovery

  Note: This will scan for file errors and physical errors (steps 6 and 7). It will attempt to repair problems with the files and folders and retrieve physical errors.

  • Check the automatically fix file system errors . (see screenshot below step 4)
  • Select the search for and attempt recovery of bad sectors .

  9. Click on the Start button and is not 10 or 11 below depending on the whether the drive is currently in use or not. (see screenshot below step 4)

  10 if the selected hard drive is not in use, you will then see to check the startup disc check the disc now.

  • When the analysis is complete, you will then see
  
  results. Click close.
• Click OK. (see screenshot below step 3)
• Stop, you're done.

11. If the selected hard drive is in use, then click on the schedule the disk check button. (see screenshot below)

Note: If the hard disk that you selected in step 2 is in use (for example, the C: drive or the partition that contains Windows 7), you will be prompted to reschedule the disk check for the next time you restart your computer.

• Restart the computer.
• At startup, you have only 10 seconds to press any key to cancel the check disk of measures 7 or 8. (see screenshot below)





• Once the scan is complete you will see a report similar to this below briefly until the computer restarts automatically.



If the problem persists, you can run repair for Windows 7.

Brand of kindly as answer if that answers your query. Let us know how it goes.

Thank you.

• Firefox will not search using google.co.uk after an update of Firefox 10.0.3 to 10.0.4

  I have a PC and a laptop, both running Mandriva Linux 2010.2. The PC running FF 10.0.3 and the laptop just upgraded to FF 10.0.4. In both cases, the homepage is google.co.uk. The PC is fine but the laptop will not try using google. I changed the homepage to yahoo.co.uk as a temporary solution and it will search and find. How can I get FF 10.0.4 to work with google?

  Thanks, this seems to have worked. I tried this before, but got no result, but I didn't close FF and restart it and that maybe why it did not work the first time. Everything is good now, thanks for your help. It is now closed.

• DST-short failed: Windows 8 will not start after windows update.

  Hi, hope you can help.

  Laptop does not start (just goes to blank screen, not same logo).

  Start-up then F11 I get F11... Lower-left system recovery

  Finally, it goes in the HP logo and prepare the AutoFix and then clears the screen after awhile and then crashes.

  Commissioning market then F10, I get ESC... Start to break down on the left

  Finally, I get into test extended to the system and get:

  Processor control spent

  Verification of Smart Drive hard past

  Short hard drive DST check Failed

  Failure ID: 0u7r6c-6hq7gq-mfpx1a-60tv03

  Product ID: c6m50ea #abu

  Is there a quick glance upward for these error codes?

  I've seen similar errors, but different failure of id, most say replace the HARD drive.

  I reinstalled and reconnected the hard drive, does not.

  Powered off, removed the power cord and battery and drained (hold down the power button for 30 seconds) and reboot to anything will do.

  I have now no functionality on this pc. If I have to replace (1 TB) HARD drive, should I get HP, a set of recovery/usb disks (Web url?)?

  Any help/advice welcome

  Cheers, Rob

  Hello

  Yes, you must get a new one.
  If you have not already, you may have to order it from HP.

  http://support.HP.com/us-en/document/bph07143

  Contact HP:
  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  Concerning

  Visruth

• HyperBowl will not start in XP SP3 / cannot install Windows update KB924867 (service pack is newer than the update...)

  original title: hyperbowl will not start in XP SP3 / cannot install KB924867

  Hello

  I just reinstalled windows XP and done all the updates. I then reinstalled hyperbowl 3d and it will not open up. Now it used to be that if you ran the update:

  Update for Windows XP (KB924867) http://www.microsoft.com/download/en/details.aspx?DisplayLang=en&id=6446

  It would solve this problem (see http://hyperbowl3d.com/oldsupport.html).

  I downloaded the update, and it says:

  "Setup has detected that the version of Service Pack for this system is newer than the update you are applying"

  So I can't install the update. Is it possible to reinstall this hotfix without remove SP3 or is there another work around, I can use?

  Thanks in advance!

  Welcome & thank you for your comments.

• Laptop no longer recognizes his screen after windows updates

  Hi all

  After you apply the updates of windows 7 Windows and Microsoft.NET Framework 4, the screen of the Lenovo Thinkpad X100e has more no image at all, even if I can still use it when it is connected to an external monitor. It is not on F7 (switching between two monitors) because the computer does not recognize its own built-in monitor more. The same problem happened before and I have reintalled all, and once again it now with the same updates. I was wondering if the technicians at Lenovo and Microsoft are aware of this problem. Here is the list of updates that are suspected of causing this problem:

  Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2572078)

  Updated for MICROSOFT.NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2468871)

  Update security for Windows 7 (KB2585542)

  Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2656351)

  Update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2518870)

  Update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2539636)

  Updated for MICROSOFT.NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2533523)

  Have you checked the graphics settings in the BIOS?

  J W Stuart: http://www.pagestart.com

• HP Pavilion Elite 235f: Ethernet Driver missing after WIndows Update 10

  Our desktop shipping computer got the update of windows 10 and now it cannot connect to the internet.

  The troubleshooting page says that it cannot find the driver of internet card.

  Help!

  Hello:

  The only suggestion I can offer would be to try the W10 Realtek ethernet controller driver from the link below.

  1 driver on the list.  Download, unzip and run the installation application.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

• Windows XP SP3 will not install and repeatedly keep trying with Windows Update

  I've had two months of problems with Windows 7 and had to build a Windows XP machine. I installed Windows XP Pro SP2 on the clean machine and tried to install SP3 I had downloaded and put it on a CD. Installation backed up the existing files and install the new files. The installer said he was changing the registry. After that the installer said that there was an error, a file is not found. Then uninstalled and restored the old files. Keeps Windows Update downloaded a stream of updates (as you would expect with a clean install), but at the end of installation of the batch that is being updated is in SP3 update running. Whenever the SP3 update is executed, it gets to the same point, fails because it cannot find a file and UN-installs itself again. The indices of anyone? It's a real Microsoft Windows XP Pro out of the box, not an OEM.

  Hi guenoun,.

  The message I received installation of SP3 was "System cannot find the file requested" with no error code. As I was installing a SP3 at the start of a CDROM created from the uploaded image of CDROM I thought it was unlikely that the CDROM was corrupt or missing files. So, I went in Mode safe mode and use the account administrator. SP3 installed then OK (it took more time than installing Windows XP). I then checked the updates, and although Windows Update has been updated about 10 new updates flooded down. So problem solved. It must have been one of these security issues where be a user with administrative privalges was not enough.

  Kind regards
  Tony

• After windows update today, my computer is SLOOOOW to initialize and pages will load hnot, guard haveng reload

  Do errors like "Internet Explorer has stopped trying to restore this Web site. It seems that the Web site continues to be a problem. »

  I did clear excess files, defragment the disk and cleaning etc, but still slower than molasses in January disc.  Arrrrgh! What to do next?

  Hello

  Unless you turned it off, Windows automatically creates a restore point before the installation of the updates. Then you look for back in time until the latest updates have been made?

  If there is indeed no longer use them, restore points, the next option would be to do a repair installation, which allows you to reload Windows while keeping all of your drivers, programs and data. Question for you - you have a restore disk from the system, or a recovery Partition or both?

  Post back here with the answers to these questions, and I'll continue to help you.

  Kind regards

  BearPup

• SlimType BD E DS4E1S will not read discs after windows update

  My laptop has a Slimtype BD E DS4E1S drive.  After doing upgrades with windows 7, it can now read all disks.  All MS suggests tried, but nothing has worked.  Don't ask, discs have been read in the same drive, before this problem started.  The computer is only a couple of months.  This utility shows no problem with the drive.  It just keeps telling me to insert a disc, such that no disk is detected.  Already tried changes to the registry (MS) and uninstall, reinstall the driver with no result.  Any suggestions?

  Hello

  I suggest you to wait for the manufacturer of your computer, ASUS responds again to you. It's a hardware problem and I suggest you contact the manufacturer of your computer for assistance.

  Kind regards.