Elitepad 900 Windows 8.1 WLAN problem

Similar Questions

• Elitepad 900: Windows 10

  While improving my Elitepad to Windows 10 900, it turned off in the process (he says he should reboot several times), but never turned back.  Now, the tablet will not illuminate at all (nothing happens). I unplugged and tried to start on battery, no luck. Reconnect the power supply, again no luck.  If anyone else has experienced this problem and is there a solution?

  Hi everyone, I thought about it.  I remembered talking to HP a few years there on the tabley do not start the system and he told me what to do.  You hold the power and volume button up to start.  I did it, it would start said it was an error in the installation of 10 and then re-installed Windows automatically go back to Windows.  The re-intall seemed to work.  Check my files programs, etc. and did not find any problem.  Will stick to 8.1.

• Elitepad 900: Windows 10 - Elitepad does not start

  During the upgrade of Windows 10 on my Tablet Elitepad 900, firm upgrade my Tablet and never restarted.  Now when I try to start nothing (literally nothing happens).  I tried on power sector and battery and receive nothing.  This happened to someone else and is there a solution?

  Hi everyone, I thought about it.  I remembered talking to HP a few years there on the tabley do not start the system and he told me what to do.  You hold the power and volume button up to start.  I did it, it would start said it was an error in the installation of 10 and then re-installed Windows automatically go back to Windows.  The re-intall seemed to work.  Check my files programs, etc. and did not find any problem.  Will stick to 8.1.  Come on Microsoft, he meets!

• Elitepad 900 window 8 reload

  Hello
  
  I have an Elitepad that was given to me by HP, 900 which I work for personal purposes. He came with the Enterprise build of Windows 8. How can I get that back to the version of Windows, it came with? The recovery partition has been deleted.
  
  Any ideas much appreciated!

  Have you created a usb flash drive recovery support?

  If you do not, you can buy HP usb recovery and use it to access a factory image recovery and Recovery Manager

  You can always log in Windows 8?

  If you can, and don't have to upgrade to a different version of Windows 8, Windows 8 use regenerate. Invoke the charm of research and the type to Refresh. Click on one of the two options as shown in the following image. Follow the prompts as shown in windows screens that appear once you have committed to the refresh option you chose.

  

• secureboot elitepad 900 Windows 8.1

  Hello

  I upgraded my Windows to version 8.1 (build 9600) today on my HP Windows Tablet. Now, Windows in SafeMode with message error secureboot not valid loading settings. How can I solve the problem with secureboot on my HP Tablet?

  The HP Bios settings icon is no longer available.

  Kind regards

  VAD

  Hi Revenger red,.

  Please follow the link to microsoft for a fixed number.

  http://support.Microsoft.com/kb/2902864

• elitepad 900 running slow on windows 10

  I have improved my 900 to 10 pro elitepad 32 bit of windows.

  the upgrade itself that has is passed smoothly, all the data/program were kept, quite impressive.

  Nevertheless executing windows 10 makes the Tablet works very slowly even after the end of the updates/patches and several restart.

  -l' overall interface is slow with delays between action and results

  -the menus are slow, the Tablet seems to use the drive too

  -watching a regular movie mkv/avi is very slow/ectic/cut - weather I use the new app using VLC Office or modern tv.

  -l' screen is not really turn off Hibernate, the retro-lightnigh/backlight remains lit unless a stop

  I did a roll back to windows 8.1 (super smooth, yet once very impressive) and performance is back where it was. Movies are smooth, the interface is fast...

  frustrating - have you noticed the same thing?

  I wanted to share the following with you - I had the problem of the screen backlight until I finished the following 10 Windows:

  Visit the site of HP support and access to the Elitepad 900 downloads for Windows 8.1.  Download the update of the driver/Firmware/BIOS ElitePad 900 (SP71504).  Run this update - the element that will be your problem is the Intel GMA driver included in this update.

  The question is 'Microsoft's basic graphics card"which is installed by default.  This graphics card also seems to have caused problems in other devices as well - if it is not necessarily a problem of HP.  I guess that there will be a stand-alone Setup program Windows 10 Intel GMA - but I couldn't find one for install - of course that does not mean it is not there.  The package of 8.1 installation above took place without problems on my device and the display number no longer existed.

  Just a note, Microsoft is having similar problems with Surface features.  They have users update the display driver to resolve the problem.

• HP Elitepad 900 G1 - problem with built in SD card reader.

  Hello.

  IM was a proud owner of HP Elitepad 900 G1 up to the point where I tried to put a 8 GB miniSD card in to built in card reader.

  The map was visible in the windows Explorer 8 for 15 seconds. Then he disappeared.

  After a long battle with drivers, internet solutions etc (nothing worked btw.) I ve installed windows 8.1 update.

  It still does not work.

  My card works perfectly in all the other electronic stuff (laptop computer, mobile phone).

  Can someone help me?

  I think I solved this problem. (Sorry for my English but I'm Italian).

  The solution is very simple, I tried several times and in my opinion, it works.

  It is necessary only to disable 'Quick start' options in Windows 8 / 8.1

  -WIN + X key, then go to 'Power Options'.

  ' - 'Choose what the switch / do"(click on it)

  "-"Change settings that are currently unavaiable"(click)

  -In 'settings Shoutdown', uncheck the 'enable quick start (recommended)'.

  Please tell me if it works for you.

• Elitepad 900 problems with wi - fi - limited connectivity networks

  Just bought the Elitepad 900 32 GB, Win 8 Pro 32-bit.

  I have a problem connecting to my network wi - fi. It is an open network - anyone can connect; I managed to connect my smartphone Galaxy S2 with no problems.

  Once the connection is established, I receive a "limited connectivity" and not internet access. When I 'fix' the network connection I get some more connected time and then it happens again.

  The diagnoses that presents 'repair the network connection' is: predefined lack gateway and bad IP configuration (I think that - because the language of my pc is not English).

  I installed the latest drivers running the .exe directly (as an administrator) and also the Softpack Manager.

  The problem remains.

  Also, when I use the Softpack allways get an error... it telling me that there is a new version available.

  Has anyone ran into this problem?

  Thank you

  Best regards

  Diogo Assunção

  After struggling around this problem, after most of the suggestions that you left, update to the latest released HP wi - fi driver, change the power adapter settings, rolling back to previous versions of drivers...
  I decided to google for Qualcomm instead of HP drivers.
  I found this one: http://drivers.downloadatoz.com/vendor_atheros_type_network-card/415775, atheros-ar6004-wifi-adapter-3-7-0-206/

  Then, I uninstalled the device in Device Manager, rebooted, looked for new devices and used the driver that I downloaded.

  He worked for longer than ever before. Updates in the next few days.

  Thank you all for your answers
  Best regards
  Diogo

• Elitepad 900 microsd card not detected

  I'm having a problem with the use of the microSD integrated on the HP ElitePad 900.

  The Microsd card works on my laptop and works on the ElitePad when using the jacket of the expansion.

  When I insert the micro SD card into the microsd slot on the back on the Elitepad next to the 3 G SIM, Windows 8 does not detect the card.

  I'm using a Kingston 32 GB SDHC card.

  I solved this problem by buying a Kingston 64 GB SDXC card. This card works perfectly.

  I don't know what's the difference between a card SDHC and SDXC card, in addition to speed? The ElitePad seems to be only able to read a large map if it is SDXC.

• Windows 7 wireless connection problem

  I just bought a brand new Alienware m17x and all drivers are up to date... .IM with broadcom wireless network adapter. The strange thing is that last night I was on the internet for several hours without any problem using the wireless, but this morning iwas unable to use my wireless internet access. This has happened several times now. Sometimes it says "not connected - no available connections" and sometimes he says "not connected connections are available" when she says, links, I try to connect to the network, but it says "unable to connect to the network. The only time wherever I was able to connect to wireless internet, was when my computer is automatically connected to my wireless network without me having to select the network and attempt to connect. I read things about windows 7, with a mode of "sleeper" for wireless connections or something, and that can be the cause of it and that it is better to turn off or downgrade to xp. I am really frustrated because I am not able to connect wirelessly and I hope you guys can help me find a solution.

   

  Guide to correctly troubleshoot wireless M17x
  with Dell Wireless 1510/Broadcom card
  by Glzmo

  Since many new Alienware M17x all powerful users, especially those who use Windows 7 as operating system there are various problems with their Wi - Fi connection and post threads asking how their difficulty over and over again, I decided to write this guide to show them how to solve these issues properly Commons. The solutions in this guide were created and designed for 64-bit Windows 7, but they may also work in Windows Vista, although these problems were experienced by users of Windows 7 mainly in the past. It could very well be that the problems start occurring in Vista as well with the new drivers and Windows updates.

  I. may not connect to the wireless network and or see the wireless adapter when the Ethernet cable is disconnected
  If you sometimes or always unable to connect to the wireless network, cannot connect to the wireless network when the Ethernet cable is disconnected, unable to connect to a wireless network unless you restart once to get this work and other weird problems to be unable to connect to a wireless network continue with section II. Otherwise, continue with section II..

  Sleep of a.i. Disable on disconnect device
  Some new Nvidia Ethernet drivers have a function called sleep device to disconnect. This is the culprit. Normally, it should only put the card Ethernet to sleep when the cable is disconnected, but it is buggy and thus kill the wireless connection as well.
  Follow these steps to disable this feature on your Ethernet Nvidia card:
  1. open the Device Manager of Windows by pressing Win + break, and then click on Device Manager on the left side.
  2 double-click network adapters.
  3 double click on NVIDIA nForce Networking Controller (Yes, that's indeed wired Ethernet adapter).
  4 click on the Advanced tab.
  5 select sleep on disconnect device.
  6 set the value to disabled.
  7 click OK and wireless should work again (may require a reboot later, but probably not).

  I.b. install different drivers (older) who do not have the device sleeping on disconnect feature.
  The above does not work or if you are not comfortable with these drivers, follow these steps (if step A.i. was successful, you will not need to follow these steps). Take care to create a system restore point before proceeding:
  1. click the Windows Start button in the taskbar.
  2 click on Control Panel.
  3 click on uninstall a program.
  4 in the list, double-click Nvidia drivers.
  5. Mark Remove only the following.
  6 in the box below, only check the Nvidia Network driver.
  7 click Remove and follow the uninstall instructions.
  8 restart the system, if you are prompted to.
  9 download another (older) driver from Nvidia.
  10 install the old driver.
  11 when asked what drivers you want to install, select only the network driver.
  12 follow the installation instructions and restart your system if prompted.

  II. Low or fluctuating wireless connection speeds
  If you have problems with WiFi low connection speeds (such as rates decline over time, the speeds are much lower than they should be, network lag/stutter in online games, loss of light packets, loss of internet connection as LAN works and other weird things) or speeds of fluctuating wildly without apparent reason wireless connection install the version of the Dell Wireless 5.60.18.8 drivers instead of the standard Broadcom drivers. All older drivers will usually cause the speed of connection under normal. Note, however, that you may need to install the driver manually via Device Manager as the pilot was not released for another laptop and is not officially available to the M17x yet - that's why the installer won't work. Take care to create a system restore point before proceeding.
  Here is a step by step how manually install the driver:
  1. download the drivers Dell Wireless 5.60.18.8.
  2 check out the R29128.exe file using an extraction utility like WinRAR or just run it and quit the installation program.
  3. open the Device Manager of Windows by pressing Win + break, and then click on Device Manager on the left side.
  4 double-click network adapters.
  5 double-click the Broadcom 802.11n network adapter entry.
  6 click on the driver tab.
  7 click the button Update driver .
  8 click Browse my computer for driver software.
  9 click on Let me take form a list of drivers for devices on my computer.
  10 click the disk provided .
  11 click Browse.
  12. select the folder that you extracted the drivers you just downloaded in step 1. in.
  13 select the subfolder DRIVER_US (if you are in the United States), DRIVER_JP (if you are in the Japan) or DRIVER_ROW (if you are in the rest of the world), according to the region you are in.
  14 click on the Open button.
  15 click OK.
  16 select the driver that says Dell Wireless 1510 Wireless-N WLAN Mini-Card of the list (you may have to scroll down to see - it presents itself as second to the last in the list for me).
  17 click on the Next button.
  18 you will get a warning that the driver that you are about to install is not compatible with your hardware. Ignore the warning and proceed with the driver installation.
  19 restart your system if prompted to do so.
  20 your new driver should now be properly installed and the speed of your wireless connection in the order.

  III. If all else fails (or you've just had enough of boredom arising from the Dell Wireless 1510/Broadcom card)
  Replace the Dell Wireless 1510 problem with a card half-mini Intel Ultimate N WiFi Link 5300 A/G/N (use the bluetooth as the third antenna antenna or buy you an additional antenna for this). It works very well with the M17x, has better connection speeds to strips of the 2.4 GHz and 5 GHz (this last has speeds really bad on the Broadcom/1510), it has not required to jump through the hoops to make it work properly and much more, it works with standard drivers and Intel maintains their drivers up to date. It is also much more reliable and faster as well, especially on the 5 GHz band, but also on the 2.4 GHz band.

  For more information on the subject of tweaking the settings of your Dell Wireless card, check out the official setting advanced properties: Dell Wireless WLAN Card User Guide.

  I hope that this guide will help you solve your Wi - Fi connection and allow you to enjoy speeds of complete wireless connection on your laptop Alienware M17x.

  Addendum: Quick links in this Guide

  Driver wireless Dell 5.60.18.8 version
  Download the driver for the Mini PCI Dell Wireless 1510 card used in this guide.

  Broadcom 943xx Wireless Driver version 5.60.18.41
  Download the latest Broadcom driver as an alternative to the Dell a little older driver who may or may not solve the problems more. Some have seen more success than with the 5.60.18.8 drivers with it (you need to use the 802.11n network adapter driver rather than at the entrance to Dell Wireless 1510 Wireless-N WLAN Mini Card in step II.15. the guide when you use this driver).

  Setting advanced properties: Dell Wireless WLAN card User Guide
  Reference Dell official Manual/Guide on the various properties Advanced Dell Wireless cards.

  Card Intel Ultimate N WiFi Link 5300 A/G/N Half-Mini
  Link to buy the demi-mini card Intel Ultimate N WiFi Link 5300 A/G/N of dell.com upgrade the crappy Wireless Dell 1510/Broadcom card that comes with the M17x.

  This Guide is a work in progress. I will update as I hear it.

  Feel free to link it in different threads to disseminate information.

• Satellite L305D-S5892 - Windows has encountered a problem

  Hello

  I have an I have a Toshiba-L305D-S5892
  With Vista Home Prem 32

  I have a few problems and am currently blocked.

  Each problem below, is a problem that I met after taking a few steps.

  * The 1st problem *.

  A few hours ago my screen was frozen just after I tried to install this codec from microsoft, so the only option I had was to do a hard reset.
  When my computer back on, I received this message:

  Windows has encountered a problem communicating with a device connected to your computer.

  This error may be cause of disconnect a device removable storage such as an usb external drive while the appliance is in use or by defective as a hard disk hardware or the CD-ROM drive which is a failure. Make sure that all removable storage is properly connected, and then restart your computer.

  If you continue to receive this error message, contact the manufacturer of the equipment.

  File: \Windows\system32\winload.exe

  Status: 0xc00000e9

  Info: An unexpected I / 0 error has occurred.

  I didn't have any usb device or removable in media.
  I can only access my utility series at the beginning, which is this menu: hand-Advanced-display-security-Boot - out

  * 2nd problem *.

  I opened my laptop and released the CD / DVD + RW, he started upward and now I get this message:

  For Realtek RTL8101E/8102E PCI - E Ethernet Controller v1.07

  PXE - E61: Media test failure, check cable.

  PXE - M0F: Exit PXE ROM.

  No boot device - insert boot disk and press any key

  * 3rd problem *.

  I downloaded the NEOSMART repair Cd.

  Once I'm in the System Recovery Options, it tells me to select an operating system. However it has not traded. If I press drivers to load, then a message tells me to insert the media, and then select drivers. I almost 'ok', and then am taken to explore, when there are a few system files and files (all empty)?

  I'm confused... any help?

  Hello

  For me, it looks like a problem with the system eventually installed the HDD failures.
  Why?

  Due to the issue described in point 2.
  PXE - E61: Media test failure, check cable error is displayed because the phone didn t find the installed operating system and try to boot from LAN.
  This happens especially if the HARD drive was not recognized by the BIOS.

  My recommendation;
  Access the BIOS and check if the HARD drive is listed there.
  If this isn't the case, then you will need to replace the HARD drive and reinstall the operating system.

  If the HARD drive is listed in the BIOS, then take a recovery disk and try to reinstall the OS again.
  If you have no recovery disc, then you can order it here.
  (I guess it's a Toshiba laptop model we)
  https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/serviceUnitVerification.jsp?orderType=SFF

  Good luck

• Satellite A500 - 1C0 - Windows has detected a problem with HARD drive

  Nice day
  Laptop shows me that Windows has detected a problem with the HARD drive. The laptop is running slow and chops. And when you turn it, it shows me Smart failure predicted on hard disk 1. Toshiba MK-5055GSX - (S2). Can you help me? (I m, CZ)

  http://img684.imageshack.us/img684/8434/smartm.jpg

  Hi Konyga,

  If you already have a warning on the internal HARD disk before Windows starts I would recommend sharing it and backup all data as quickly as possible.

  Is your laptop still under warranty?
  If Yes, you can get a new HDD to an authorized service provider. It would be free because it s covered by the warranty. All you have to do is contact with an ASP.
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

• Elitepad 900 won't turn on without power in socket

  Hello, I just got an elitepad 900, it works very well when I power is still plugged in and also when the power cord is connected almost in (just a little bit in which he dosnt fresh but it is always plugged.)  but the second that I remove the power cord completely, she stops and I can not activate it until I plug the charger again...
  
  I don't think it's the battery because there is a lot of power on it and when the charger is plugged in barely there dosnt fresh and the Tablet still works.
  
  Hope some of you can help me

  @jofftheman

  Please use the Forum from HP Support. I brought your question to the team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).
  
  If you are not familiar with messaging private forum please click here to learn more.
  
  Thank you
  Omar

• Windows has encountered a problem with the DVD/CD on Qosmio G20

  has obtained a g20, problems with the cd player. When I go to copy or move music or pictures on my cd/dvd, I get a pop up saying windows has encountered a problem with this drive...
  can someone tell me what is happening.
  Thank you

  On this path, it is not easy to say anything. Try to remove the drive from Device Manager, and then restart the device. The unit should be recognized and installed correctly.

  If you want to create data CDs using windows options please check disc recording option. Check the properties of the drive and check option under the recording tab.

  Good bye

• 10 Windows compatible printers: printer problems after the upgrade to Windows 10

  If you're wondering what HP printers are compatible with Windows 10, see this HP support doc: Windows 10 compatible printers.

  If you re having a problem with your HP printer after the upgrade of your Windows 10 PC, printer problems after upgrade to Windows 10 could solve your problem. He treats all kinds of questions such as:

  • Cannot print after upgrading
  • Cannot parse after upgrade
  • Printer software installation & screen opens instead of HP printer Assistant
  • "HP solutions Center can not run" or "Scan is busy or in use" error with a network connected printer
  • Multiple display of printer in the HP printer Assistant names
  • Can not scan or fax with HP Solution Center after that disabling HP programs to improve performance
  • "Access denied" error change HP Solution Center print settings
  • Cannot print with a pilot integrated Windows (Africa, Asia Pacific, Europe and Middle East only)
  • Fax device are not not in the devices and printers connected to a USB printer
  • HP Printer Wizard does not open with a USB connected printer
  • HP Smart printing does not open in Internet Explorer
  • "Error-2081883401' poster during the uninstall of the printer driver.

  In the compatibility Windows 10 doc, follow these steps to quickly locate your printer:

  Click and scroll down to the section for your printer, then hold down the CTRL and F keys. When appears in the search box, type the number of printer model to automatically find your printer. TIP: find the numberof the printer. For example, if you have a HP Officejet Pro 8600 Premium e-all-in-one printer, open the Officejet section and search for "8600" instead of "Officejet 8600.