Elitepad 900 microsd card not detected

Similar Questions

• NETWORK card not detected after installing ESXi 4.1?

  Hi all

  I installed the ESXi Server 4.1 on a single server with the following configurations,

  CPU = Intel (R) CPU Xeon X 3430 @ 2.40 GHz

  Memory = 16GB

  NIC = Intel 82574 L Gigabit Network connection-2 no

  After that ESXi installation a NIC card not detected. But two cards network is the same configuration. Due to this problem, I can not configure grouping of NETWORK cards. Please suggest me. Thanks in advance.

  Hello!

  On the screenshot that you are using a motherboard Intel S3420GP. Just a NETWORK card is 82574L, the other on board is a 82578DM, which is not supported. So you will need additional network cards.

  See you soon,.

  Martin

• CQ5110y - new graphics card not detected

  I have a cq5110y that I am trying to upgrade the graphics on.

  I just installed a bigger power supply and is working on the installation of a Sapphire Radeon R7 240, but when I turn on my computer it does not detect the new hardware.  Am I missing a step?  Or is the card DOA?

  The steps to install the new card were quite simple--plug it into the PCI-e slot and connect the monitor.  There was a note to disable any integrated first graphic, so I put the display to PCI-e in the BIOS.  Is that all I had to do to disable the integrated graphics card?  I think that this could be my problem?

  Your Compaq Presario CQ5110Y desktop uses a chipset NVIDIA GeForce 6150SE nForce 430 seems limited to the PCI Express 1.0 version.  PCIe v1.0 is compatible front of PCIe v2.0.  PCIe v2.1 and above is not backwards comptible with your motherboard. Your Sapphire Radeon R7 240 seems to use a PCIe v3.0 card and is therefore not compatible with your computer. Please return the card for a graphic card PCIe v2.0 solve your problem.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• card not detected wireless network

  My HP ProBook 4520 s does not detect the wireless network card. Even after installing the drivers, I get the following message...

  There are currently no available and enabled wireless adapters.

  Please activate the available adapters wireless before accessing this configuration utility.

  Please help me with this.

  Hello

  It seems ONE thing missing: Atheros 802.11b/g/n wireless card

  Please use it to install and after return the result:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-95105-1&mode=4&IDX=2&prodTypeId=12454&prodSeriesId=316720

  Concerning

• Pavilion g6 2303 sh dedicated AMD Radeon HD 7670 M graphics card not detected win 7

  Hi, I have a g6 2303 sh laptop pavilion. I use win 7 x 64. I downloaded the driver for my videocard of 7670 M AMD Radeon HD hp page: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=hu&cc=hu&dlc=hu&sw_lang=&product=5354...

  and after trying in vain for the amd home page. None of them does not detect my video card.

  This page only shows drivers hp for win8, which I won't use.

  Where can I find a driver for my video card?

  Thank you

  Tom

  Hi, Tom:

  Use the W7 x 64 drivers of th is model g6.  For graphics, simply use the graphics driver AMD, Intel, not one.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5278311

• XP, video card not detected

  I have an old HP Pavilion with an integrated GPU. I installed XP and was able to install a missing audio driver. However, the system is still missing the SM Bus controller.  I installed the software of my new GPU on a disc and I changed the default on the BIOS to the PCI-E. I have physically installed a Radeon HD 5450 GPU, but the system does not detect. Can you help me?

  HP Pavilion 061 EV935AA-ABX a1420.fi

  Mother-Amethyst-M version 1.0 card

  North Bridge: ATI Xpress 200

  South Bridge: ATI SB 400

  CPU: AMD Sempron 3200 + socket 939, 3 Ghz

  2 GB installed memory

  Hi fabiolivorno,

  Welcome to the Microsoft community. According to the description of the problem, your video card is not getting detected.

  It looks like a hardware problem, I suggest you contact HP support for better support. You can also contact the local Tech store for that matter.

  Missing SM Bus controller problem, it appears that if the chipset drivers are slow to be installed. I suggest to find the chipset on the CD drivers and install them.

  I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

• Roxio capture card not detected in Windows 7 game.

  original title: how to revive plug-n-play

  I recently got a Roxio capture card and everything works fine on it, but my other computer, Dell Optiplex, could not manage it so I fell on my lenovo thinkpad and plug the device into the usb port but I forgot to install the CD it came with the first plug-n-play came with "no driver found". so now I installed it on here, but when I re home acquisition card, Plug n play dosent come up. and I tried to use the add hardware feature but could not find my device (more I didn't know really what it would be under).

  is there a way to reset plug n play or something, so I can install it with the pilot who is now on there?

  BTW, both running win7

  Hi Sonrio,

  Welcome to Microsoft Community where you can find all the answers related to Windows.

  According to the description, it looks like the game capture card Roxio is not detected in Windows.

  I have a couple of steps that should help you with this problem.

  Method 1:

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Try to connect the card somewhere else USB and check.

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

• Card not detected for Treo 650?

  I have a 4 GB SD memory card that I bought for my Nikon Coolpix just now. When I got my Treo 650, I thought that I could use for that as well.

  Even if it fits directly into the slot, the device does not detect or recognize the SD card. It is compabible and can I do?

  Is the variety of SD HC card?  It will not work...

  Your Treo can only use regular SD cards.

  WyreNut

  Message relates to: Centro (AT & T)

• Support for the NETWORK card not detected during Setup

  I try to install vSphere Hypervisor 6.0.  He said there was no detected network devices.  I found the NETWORK provider interface card and ID of device in ESXi console.  I then found his page in the VMware Compatibility Guide. The page indicates 6.0 is supported and this is the Inbox.  No idea what could be causing this error?

  Edit: I can't seem to get the hyperlink in this text editor, I can not paste links.  So, here's a screenshot of the page of network cards

  

  Ah, what is more likely is that 6.0 does not have the appropriate drivers for the game chips and bus system so it does not detect the network interface cards because it does not actually detect parts of the motherboard.

  There were a lot of older drivers removed in 6.0 which enabled 5.5 and below to work on the server not hardware. You the best solution is to install vmware workstation and install it inside the workstation for testing.

• Passport blackBerry problem: Sim Card not detected after several days, reboot needed.

  Hello

  As the title suggests, every other day or two my passport tells me that it cannot detect the Sim Card. If I restart the device, the problem is solved but only for another day or two. I've never had any problem with this card before so I suspect it has something to do with the device. Is anyone know about this problem?

  Kind regards

  Willem

  Here's what I'd do. The next time it happens, power down and remove the SIM card. Reinsert the SIM card and make sure it is fully inserted. Then to test and see if the error occurs again anytime soon.

  I have not had this happen with my passport yet, but I experienced it here and there in the past. Unless the SIM works actually, the removal and reinstallation of the SIM card corrected the problem. Also, I experienced a failure of the SIM card, and it's all or nothing. Perhaps failure of the SIM card can be intermittent, but I doubt it.

  If you get the error again, talk to your operator. They could suggest to try a new SIM card. At least this excludes from the SIM card and tap the device if you get the same problem with a new SIM card.

  Alternatively, you can reinstall the operating system as a troubleshooting step. Yes, you shouldn't do this, but it is set on a software problem.

  If you want to be as certain as you can know if the device is defective, it is my opinion on what to do. Otherwise, you can go ahead and request a warranty Exchange. I try and avoid that, personally and at least to eliminate other possibilities first.

• SD card not detected by XT910.

  Hello

  A few days back I received a notification of Android to encrypt the data on my phone (I was concerned by something else, because of which I just went with the on-screen instructions without thinking a lot). After that encryption thing finished, my XT910 refuses to acknowledge the fact that a micro SD card is inserted in it indeed. I tried to remove the card and reinsert and also tried to insert the SD card a friend without success.

  Someone went through the same situation?

  Thanks in advance,

  Sandrine

  How about you try it in safe mode. I'm running out of ideas. The next ideas are a few shots in the dark to try to avoid asking you to make an FDR. Safe mode will exclude any 3rd party applications. I don't know how a 3rd party app could cause this but it's worth a shot.

  Down running the phone safe mode, turn it on and when you see the Motorola emblem then press and hold the volume through the button until the phone starts. You should now see the mode without failure in the lower left corner of the screen.

  Now back to the SD card. It appears now?

  If not I suggest you try to erase the partition hiding in the Android system recovery. To accomplish this, follow these steps . Follow the steps in the alternative method. Step 6 select Delete partition hiding instead of erasing data. Don't worry, this will not affect user data on your phone. By doing this, you won't lose any data or personal information. It will take a little more to your phone to start, but.

  Now test to see if the problem persists. In the affirmative, please let me know what you did and didn't. If those two steps have not then I would suggest that you back up all data you want to keep and perform an FDR (data reset). To do this, you must follow the directions above to the wipe cache partition but select the wipe data in step 6. Please let me know if you decide to try this and what are the results. I hope this helps.

• Carbon X 1 SIM card not detected (Sierra EM7345 WWAN modem)

  Dear all,

  I have a X carbon 1 with Sierra EM7345 WWAN modem. It is that everything installed perfectly - drivers etc. But id does not recognize the SIM card. I googled a bit and I can say that:

  (1) I have the drivers OK, I the WWAN etc network adapter.

  (2) I inserted the SIM card

  The SIM card works perferctly if I use the key USB 3 G stick instead. So the problem is not the SIM card.

  In my view, there are a few configuraiton Sierra modem that should be done - to switch to 3G / 2G or something.

  Please help - one of the main reasons to buy this laptop was the integrated WWAN.

  Thank you. Here are some screenshots with the config:

  

  Win7 is a better OS in our case for troubleshooting.

  Do you see a broadband network connection manager window (VAN UI)? Check the APN settings.

  Could you install Lenovo's Access Connections on the laptop?

• T6S89UA: HP Pavilion x 2-12-b020nr SD card not detected

  Hi friend

  I have tryied to 32 Gb SD card connection to my SD Slot card, but his watch not as a drive (D), if any software/driver update for that.

  Thank you

  ISURU

  Update the BIOS F.13 Rev.which is finally out on 25 may 2016
   
  issue has been resolved.

• NI PXI - 8361 PCIe card not detected

  Hello community,

  I'm trying to mount this PXI system and running on a computer that is running Windows 7 Enterprise 32-bit. We already have a system running on another computer running Windows XP 32-bit.

  Chassis OR PXI-1036

  OR PXI-8360 controller connected to the PC via card OR PXI - PCIe-8361

  NI PXI-6220 multifunction data acquisition

  NI PXI-2570 relay module

  OR PXI-GPIB

  I spent a day or two trying to download different drivers and could see the NI PXI-PCIe 8361 NI Max card, but I did not see the chassis. I then tried uninstalling all software of OR, so that I could do with care that it was installed in the proper order:

  1. shut down the PC and PXI system, disconnected from the PXI from your PC system.

  2 installed Labwindows + Labview (Developer Suite 2011)

  3 installed NI PXI Platform Services CD that came with the PXI (Version 3.2.3) system

  4 installed 'System NI Driver Set 2014.05' a Flash disk that came with the PXI system

  5. off the PC and then on the PXI system and connected to the computer.

  After turning on the PC, I see that MAX NOR does not seem able to recognize the NI PXI-PCIe 8361 card as I have before.

  At this point, I thought that it would be better to ask the community for help rather than start abritrarily updated drivers again.

  Thing some Chris!  HM this is interesting.  Looks like this might be a BIOS problem, in accordance with the following article -http://digital.ni.com/public.nsf/allkb/81A788D0076390FA86257BF9002F9983?OpenDocument.  The link also shows that some BIOS update the troubleshooting steps.  I hope this will redirect you to a resolution.

• Elitepad 900 now will not even turn on.

  Hello.  I posted a two-part question, a week or two back.  No responses.

  Now the Tablet does not even start.  Zip fastening.  Black.  No response.

  Is it possible to use the thing connector to connect to my laptop and "read" in this way?  Using the power of the laptop, what is?

  Only had this thing for December and use it only for one thing (read/store my Zinio mags) is not as if he's been hammered by day in a business environment.

  Clues?  Unfortunately I am currently in Italy till coming December when I go home to Oz for Christmas.

  Hoges

  Hello Hoges,

  Subject of your question to connect the Elitepad directly to another PC via the USB port.

  Given the Tablet is a complete windows PC, you do not connect directly to another PC via the USB port.

  Androids and iphones from Apple, etc. etc. are different from a windows PC. Even if you used a usb OTG cable.

  Windows PC can be connected via a crossover cable, but it is very specific and requires a port ethernet on both machines.

  You can connect via a network, such as the connection via a group of home via a wireless connection.

  Even better, you can back up your files on a service like Dropbox cloud, Onedrive or Google and then upload them to another machine. If both computers use Windows 8.1, you can use HP Connect to backup and transfer files.

  If you have a micro usb usb adapter, you can use a USB for file transfer with.

  I don't know anything about magazine articles you download, but if made via an application in the Windows store, those who could not be redownloaded in any case without transfer?

  IF the Tablet is still under warranty and the loading port is loose, you can contact HP Support to see what your options are.

  It will be useful.