Emergency aid! No images after optimization catalog!

Similar Questions

• Noise will appear on the jpg image after optimization pdf

  When I optimized a PDF in Acrobat recently, noise appeared on the cover of art jpg as you can see in the fence below. How can I prevent or eliminate it?

  

  Looks like you want to change the configuration for the "Images" in the Optimizer profile you use.
  Avoid compression with loss (no compression "jpeg"). Select 'quality '. Avoid subsampling.

  Play with different setups to see what fits your needs.

  Be well...

• Problem of sharpness of image after export to JPEG

  Hello

  I have a problem of quality after the export of the image. for example in one case, I make a modification, especially at the level of sharpness of an image, after when I exported the JPEG image, there is a large drop in sharpness and more noise.

  Knowing that the adjustment of export level everything is good in quality years 100% and type pour inking of high office.

  NT: the quality of the Exported JPEG image is the same as the quality of the image in the library and not in development tab.

  Thank you

  Hi alaeddinea,

  Develop module does not profile different color compared to export and it's one of the reasons it's different.

  If you can shoot in raw and use the same format for editing the image and then you can export the image as a jpeg of high quality.

  Kind regards

  Mohit

• Quality image after export problem

  Hello

  I have a problem of quality after the export of the image. for example in one case, I make a modification, especially at the level of sharpness of an image, after when I exported the JPEG image, there is a large drop in sharpness and more noise.

  Knowing that the adjustment of export level everything is good in quality years 100% and type pour inking of high office.

  NT: the quality of the Exported JPEG image is the same as the quality of the image in the library and not in development tab.

  Thank you

  There are several problems with your settings. The detail panel sharpening (NET ') and the noise reduction controls should only be paid in Zoom 1:1 Mode. The amount of sharpness (Gain), detail, brightness and contrast are too high. Adjustment brush sharpening (NET ') setting 100 is compensated by the noise of 100 (noise), so little local sharpening is applied. Also the moire ' and fringe 100 parameters must both be left at 0 (OFF), because they serve no purpose for the sharpening of the premises. Please try the settings below and evaluate the results in development and library modules View Zoom 1:1. If having the same problem please download the raw export to DNG on Dropbox or other image file sharing site files and I'll try to decide the issue.

  For more help and tutorials in French please look on this link: training for Lightroom, assistance and support. Adobe Photoshop Lightroom 5

  

  

• I am a user of Picasa for a long time conversion to Lightroom.  I share photos with dropbox on a MAC, a Windows computers, storing images and the catalog in dropbox.  I'm able to share the LR catalog, but on the second system images can be found as s

  I am a user of Picasa for a long time conversion to Lightroom. I share photos with dropbox on a MAC, a Windows computers, storing images and the catalog in dropbox. I'm able to share the LR catalog, but on the second system images can be found as a prefix system DB files have different user names. Any ideas?

  At the point of Lightroom to another location for photos, follow these instructions:

  http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

  Note: If the catalog is constantly being synchronized to DropBox, you will most likely follow these instructions whenever you open the catalog on another computer.

• 6 of Lightroom. When I opened to develop & load an image from the image after is removed a pale blue screen.  If I shared the screen I can see the front of the image but the image after rest as a blue screen. Clues please?

  When I opened to develop & load an image from the image after is removed a pale blue screen.  If I shared the screen I can see the front of the image but the image after rest as a blue screen. Clues please?

  Most likely, LR has problems talking to your video card.

  In the Preferences dialog box, tab Performance, disable the use of the GPU.

• Show your original image after editing?

  How do you view your original image after you change the image? Thank you!!

  Hi Daniel,.

  You can also access before and after the display of the toolbar in the develop module. It will allow you to obtain before and after the display on the screen.

  

  So you can click on the dropdown for more options from view menu.

  Please let us know if this helps

  ~ UL

• I'm trying to reduce the file size of a jpeg file, but the dialog box under image > image size reflects a much smaller that the file is. I saved the image after resampling and by reducing the size of the image, reduced the pip to 72 and lowered the qua

  I'm trying to reduce the file size of a jpeg file, but the dialog box under image > image size reflects a much smaller that the file is. I saved the image after resampling and simplistic image, the pip size reduced to 72 and lowered the low quality only to see the minimum file size reduction. Why the dialog box in photoshop gives me a different file size than my computer and how do I solve this problem? Thank you!

  The Image Size dialog box dialog box shows the uncompressed size.

  Your operating system (Explorer/Finder) shows the size compressed. (size on the disk)

  If you use save for Web, you can see the compressed size, but also an overview.

• HTML5 Canvas move one image after a period of time

  I'm new to JavaScript and html5 Canvas and you want to move one image after a period of time, for example, after an audio clip is finished playing.

  I tried: setTimeout (function () {this.getStage () .getChildAt (0) .gotoAndPlay (2);}, 36000);

  This code does not work.

  The equivalent AS3 is: function wait() {stop (); var myInterval = setInterval (function () {play (); clearInterval (myInterval);}, 36000) ;} / / end of the function wait();}

  Thank you.

  Is to understand "extended", who looks much more like the ActionScript 2.0. The word 'this' as you have it does not refer to what you think it does. Because it is inside a function (anonymous function for setInterval you did), it comes to this scope.

  Two ways to resolve this problem, assign the current scope and use inside the anonymous function or use the shortcut of exportRoot.

  affect the scope

  This.Stop ();

  var _scope =;

  {setTimeout (function ()}

  _scope.getStage () .getChildAt (0) .gotoAndPlay (2); using the reference _scope retained by the top

  (}, 36000);

  Or this shortcut in the root scope:

  {setTimeout (function ()}

  exportRoot.gotoAndPlay (2);

  (}, 36000);

• How to get a link to open inside a page without the aid of images?

  The customer wants outgoing links from its site to open inside its own website (and he showed me an example of a site of era of the 1990s using frames...).  Before I pick up on the ground and muster the strength to have the discussion with him, IS there a way to do this without the aid of images?

  Thank you!

  What about using an IFrame to integrate the content of the page.  You can always use its header and footer - basically its own layout, but use an iframe in the main content area of the page.

  http://www.build-your-website.co.UK/using-iframes.htm

  http://www.w3schools.com/tags/tag_iframe.asp

  --

  Nadia

  Adobe Community Expert: Dreamweaver

  ---------------------------------------------------------------

  Unique templates CSS | Tutorials | SEO articles

  http://www.DreamweaverResources.com

  --------------------------------------------------------------------------

  Web Design & development

  http://www.perrelink.com.au

  http://Twitter.com/nadiap

• (problem, emergency) Lenovo S650 stuck at the boot animation/image after reset of the system.

  Hello as the title suggests I made a system full erase/reset in recovery (power + volume up + volume down) mode and now the phone is stuck to the boot animation/image.

  Please someone help me I'm in a hurry and it is an emergency!

  model: Lenovo S650

  firware: 4.2.2 stock

  Thank you!

  Resolved, reflashed stock rom

• Image optimization forget its image after resizing

  I have a VI that uses an image control that resize as the window resizes.  The problem is the image clears most of itself when it is resized.  I have deduced that this happens because I erase first deselected.  After resizing, only the last draw remains visible.  See the example attached to better understand.

  I wonder if there is a way to remember.  Or a way to get the image data, so I can "redraw" he after all resize, without actually redrawing.

  Any suggestions? Thank you

  
  

• Emergency aid. Stuck with black screen after installation of el capitan

  My macbook pro very frequently showed the circle of death. So I've updated for Mac el capitan. After many attempts, I've been successful. But once again the wheel of death problem started. so I decided to reinstall. After the reinstallation, I got a blank screen with a cursor. Does not further. After I stopped and restarted, I just get a screen version of the kernel and it restarts. So I'm stuck. Please if someone could help me. Its urgency. Mac not opening.

  Try this first and report back.

  Try safe mode if your Mac does not end commissioning - Apple Support

• After LR3 catalog upgrade which is the best way to upgrade all the images to the new process engine?

  Is there an easier way to upgrade the entire catalog to the new process engine (2010) more than one at a time in the develop module?

  Select the files you want to update in the library grid.  Then go to the Photo menu, choose start develop settings, then choose "update of the current (2010) process.

• Updates to Windows System Image after restoration.

  I recently did a restore of the System Image on my XPS9100.

  The restore worked perfectly, but it set the return system 7 months and now I can't get Windows updates. Normally I use the setting: check for updates but let me choose whether to download and install. When I choose verify Windows Update I get the loading/control screen, and I have that let it run for at least an hour before finally changing the Windows Update settings never check updates and then close the computer just get the process ended. I realize that there will be many updates to install from the last 6 months, but it should it will not take long.

  Information system: Win 7 Home Premium with Service Pack 1.  Intel Core i7 CPU - 960 3.20 GHz.  64-bit operating system and I currently have 1.72 free TB on the C: drive. My download speed is a fairly consistent Mbps 60.

  If I check under the put option to update installed, everything is up to 15/07/15 (when I did the disc from the System Image).

  Someone at - it any help?

  1. my computer had been black projection after idle for an hour session. The message on the screen says to press F1 to start, but has nothing else to scroll to the bottom of the screen with the same message. When this happened, the fan was very strong. The only way to stop the process has been to make a hard stop with the power button, or disconnect the whole system. Chrome has been loading slowly - nothing major, but noticeable...

  2 Norton 360 and the subscription is good for 612 days more.

  3 McAffee may have been installed at some point in a test package

  4 NO.

  1. in Windows Explorer [Windows key + E], stand & click on:

  • C:\Program Files\ Norton 360 <=this>  

  Select PROPERTIES: What is the CREATION date displayed on the GENERAL tab that results?

  2. you are running Norton 360 version 22.x or 21.x?  See https://support.norton.com/sp/en/us/home/current/solutions/kb20080417101717EN_EndUserProfile_en_us

  3. you are a subscriber to Comcast Infinity by chance?

  4 East-KB3135445, KB3123862, KB3035583, KB2952664, or KB2990214 listed in installed updates (not update history)? [1]

  5 assuming that Java is installed => is 73 update Java Version 8 (or higher) installed? TEST HERE in USING INTERNET EXPLORER ONLY! -online http://java.com/en/download/uninstallapplet.jsp [2]

  6. Adobe Flash Player is v20.0.0.306 (or higher) installed? TEST HERE in USING INTERNET EXPLORER ONLY! -online http://www.adobe.com/software/flash/about/

  7. when (exact date) was Internet Explorer 11 is installed according to the installed updates?

  7B. what Update Version & KB number are displayed in the second line of text using IE11 | [Alt + H + A] tab. for example, Updated Version: 11.0.99 (KB1231231) ?

  8. is Firefox version 44.0.2 (or higher) or Google Chrome version 48.0.2564.116 (or higher) or another alternative browser installed?

  9. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. Glary Utilities; AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. Registry cleaner CCleaner component)?

  ==============================================
  [1] start | Control Panel | Programs and features. See installed updates (in the left menu)
  [2] no need to install Java if it isn't already installed.