Show your original image after editing?

Similar Questions

• Difference in images after edit

  

  I was shooting timelapse, photos taken with the same settings and three seconds apart.
  Images of .raw looked and was still. After editing, some differences have occurred. If you look at the background images. This is the way it should be. But the top image seems to have lost some contrast. This has happened to a few images. Why what happened?

  If you look more closely. On the top of the images, you can see a few black undesirable object. This is my window. I could not open it no more, and the preserved wind move the frame of the window in my opinion. My floor is also a bit uneven, so whenever I went to check on my camera the inclined device. I come to stabilize and to crop images. But, the low contrast problem on the top of the page images seem to occur on the images when I stepped in front of the camera and created a movement. Still, the .raw image looked anyway. After is change what has happened. Shot in manual mode.

  That's my analysis that the black window in the top frame is initially the difference in brightness between the two raw images even if exactly the same exposure of the camera and Lightroom adjustments have been used.

  Toning Lightroom adjustments are a bit non-linear, that is, the content of the image indicates how things become lighter and darker.  This is especially true of whites, highlights, shadows, blacks and the clarity.

  In this situation, the frame at the top of the window is a darker dark object that whatever it is in the rest of the image, then it keeps the obscurities of becomes too dark, as if she wasn't there.

  It actually means that you cannot use shadows, blacks or the clarity with this sequence of raw due to varying amounts of black images.  The amount of clouds shading image will have also some effects, especially for clarity, but less compared to very dark or very bright pixels.

  For this sequence of images, the best thing to do is probably the FIRST crop images and the same so that no foreign window frame shows up on any of them, and THEN synchronize your white balance and other adjustments without colors and other tones - Reduction noise, sharpening and THEN do an Export of images in 16-bit with a color profile of ProPhotoRGB TIF.  Reimport into LR and do your toning and color adjustments.  It does not crop the raw images, because the toning adjustments always watch all pixels, including those outside the crop area, not only the visible pixels.

  RAWs and hair are not exactly the same thing in regard to the toning and color but you could start with toning bullies and synchronized with all hair colors settings and see if there are other adjustments.  Here is an example of my fact that when the first column of images are your two raw files with the same settings and the second column only being two cropped hair with the same settings.  You will notice that the Hill, especially the lower right, a different brightness between the two raws but the same brightness between the two objectives.

  

  --

  I don't know which would cause the difference in color in the night photos, above, unless it's a slow drift caused by the sensor of the camera warm-up with the use and the increase in high-ISO noise and affecting some colours more than others.  If you see a slow drift then this is probably the situation.  If you see the color to random change it back between the different frames, it's probably something else that I don't have a theory without more information.  A random fluctuation in color between different images usually occurs at the inside with fluorescent lighting, because the color and brightness changing with the a/c 50 Hz or 60 Hz frequency.  Cameras Nikon for a few years and the new cannons, detects this fluctuation and the shutter with the maximum brightness for each shot of a burst will look like the time.

• Where can I find my original photo after editing to the organizer and the saiving it

  I am brand new to photoshop elements.  I edited a photo in the editor and saved with a different name.  Now, I can't find the original image.  What happened to him?

  When you work in the Organizer in PSE13, by default you will see a display of thumbnails where each thumbnail is enlarged without text, name of file or details.

  It is a new view in version 13. You can switch the display mode to the old vision "detailed", where the tile is smaller, but indicated with the file name and details if you have enabled this option in the menu "view". To move, use the view menu or the shortcut Ctrl D.

  When you have edited a photo of the Organizer, the new image you created is linked to the original, they are in a "set" version Only the most recent version is displayed by default. When you have switched to the 'detailed view', there is a small triangle on the right of the thumbnail. Click on it, and all versions will be displayed next.

  Is that what you want?

  If you have created a set of version, a small icon should appear on the top of the page thumbnail even country in no detailed view.

• Black blocks on the image after editing in Camera Raw.

  IM using photoshop cc on my mac and when I open the raw files and edit them in raw form and then open the file in photoshop, when I finished raw edit, the picture is about the missing half in black blocks, what should I do to get rid of the image missing half.

  Put the GPU in Adobe Camera Raw and let us know if it disappears. You will need to repeat the process.

  

• When I stop playing, the source monitor goes black. It does not show a still image after pausing.

  I just got a HP Prodesktop 400 G1 MT, Intel core I7 processor. In first 8 adobe, when I stop the video playback, the source monitor and program monitor won't give me a fixed image. As soon as the video is stopped, the screen is empty while normally, they would be in a freeze frame. the computer has an AMD radeon graphics card. I have two pc for dual monitors. I tried to play with the settings of reading to the premier, but no luck. I'm about to take the computer to be recovered. Any suggestions?

  Hello! Thank you for responding. I'm currently doing an update for my AMD display driver, and it is up to date. I called tech support and they helped me in the question of fixing from the option menu file - rendered video - general - project settings and playback - selecting mercury playback engine software only option. My computer was set to the GPU acceleration engine. It works fine now. Thanks.Aldo

• Loss of quality of the image after you have placed?

  Hi people, I could really use some advice here. Currently, I'm going to print a document and have encountered some problems in image quality.

  More specifically, when I compare the quality of my original images (fit) to the quality of the images placed in InDesign, images in InDesign (and later, in the events of printing) are heavily pixelated.

  I don't know if this image as an attachment is important enough to illustrate this problem, but the small window is open TIF image (and zoomed in) in Windows Picture and fax viewer and it is superimposed on the image when zooming-in in InDesign.

  I've only used InDesign for a couple of years, so I really hope that I made an obvious mistake, but I can't seem to find a solution to this problem after having spent the afternoon on Google and Adobe forums trying to find a.

  Thank you in advance for your help!

  Aryn

  

  Additional information:

  -with the help of InDesign CS4

  -J' set the display of high-quality performance

  -J' checked the link

  -J' tried to rebinding

  -l'image has not been resized in InDesign

  -J' tried to create a new image and place again, with the same results

  Windows Image & Fax Viewer is not really the best tool to inspect the images with. I suspect that your original image can be as pixelated as InDesign shows, while the Image Viewer smooth it on enlargement; It is certainly * not * show "real pixels as rectangles.

  (Word is another program that did this same dirty trick - prompting complains like "my image looked better in Word," while in fact they are worst but blurred into oblivion.)

  You need to see in a real program, such as Photoshop. (The actual pixel dimensions that Peter also claims would help.)

• Original image is no longer on here

  Hello

  Have an HP Pavilion desktop model # p6257c.

  Around Thanksgiving, it crashed & then on New Years.

  How to bring back this part of the computer?

  In addition, still cannot back up discs (even though I followed the advice of DP - K here) & now I'm the administrator of the computer.

  I can make records of music, so the player doesn't work for this.

  This is the error message I get from Windows trying to back up: Error Code 0 x 1000019. Backup did not complete.

  Then he said: I have files waiting to be copied, the next time I start the computer. I click on this & nothing is there.

  Sometimes windows online about came & said it is a snapshot, and then crashes, stops & restarts.

  Any help would be greatly appreciated.    Kathleen

  Hello

  If your original image is no longer on your PC, you can try a different brand of disc, if this does not work you can take it to a local pc repair shop, to back up the data. You need to get the recovery disk from the manufacturing to the unit and run a disk recovery it will take off the bone and re install... He'll recover Island pc back to factory settings which should put back your original image on unit.

• Storing original Images in the cloud

  Hello

  I'm looking to store my original photos in the cloud (not just the previews and fixtures etc.) so that I can access these on two separate changes to Lightroom on each machine computers. I understand that creating clouds is not a platform for online storage for mass mail so that I considered Dropbox or Google Drive.

  Question; If I have two different computers, each with Lightroom installed CC, both related to their local copies of my Dropbox folder as the location of the library, Lightroom on each computer will recognize that they are the same images if I do the local path to the same Dropbox folder on each computer, e.g. c:\dropbox\photos

  Thank you.

  Hi cj.jonesie,

  As far as I understand, you're ready to store your original images on dropbox and maintain the Lightroom catalogs on two different machines.

  If you will only store the images on your dropbox folder, catalogs would remain separate on both machines so two catalogs would be able to recognize the images as even, but installation in two catalogs would be different.

  If you want to access the same catalog of these two machines, then it would be proposed to store your Lightroom Catalog and the original images on external hard and the plugin that grow on the computer on which you want to install.

  Kind regards

  Claes

• How can I make a single image that presents before editing and after editing for a portfolio of photo editing?

  I am trying to create a portfolio that shows the work I did in the past to show potential customers of photo editing. I can't understand how to save pictures on a single page/image in lightroom before and after.

  I think the easiest is to have a virtual copy with the parameters of origin, then take the VC in the print Module and use a template for two as Custom (2) 6 x 4 and then use print to JPEG in the printing Panel the task...

  

• After the system recovery complete original image

  Win 7 Desktop was unstable after a few years, and I wasn't able to run a successful restoration to any number of restore points, so just yesterday, I backed it up and ran the recovery of the system of internal recovery option in the Recovery Manager and not from disks.

  The process was nice and smooth, but in 'My computer', I noticed that my original image on the D drive already appears almost complete and wonder if this is the case?

  It shows only 327 MB 10.7 GB free space.

  My concern is it will be full in no time and leaves no room for new info in case it is always necessary.

  So my question is, or the original image is correct as this is what I have to do something now, even if it means another recovery?

  Thanks for the tips

  You are the very welcome

  Happy computing!

  Jaco

• original image D only 599 MB of 8.5 GB and showing a red capacity indicator

  Hello

  the configuration of the audit Panel, I noticed that factory image (D :) showed red disk volume indicator, the screen said 599 MB of free space with a capacity of 8.5 GB.   Is this what can I do to get more space, to be honest I don't know what the drive stores.

  This is used if you ever want to restore your computer to how it was when you bought it. You should not try to store all files into it.

  If you have not deliberately saved all of the files on this subject, you can ignore the fact that he blushed. If you suspect that something has been stored on it, you can use this HP article, by replacing references to the recovery of the original image.

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c01508532&LC=en

  Do not delete any files unless you know exactly what they are, or you will lose the ability to restore your computer to factory settings.

• After editing an image in windows Photo Gallery can't save the picture. I get a message that tells me that something is wrong with the application. How to fix this problem?

  After editing an image in windows Photo Gallery can't save the picture. I get a message that tells me that something is wrong with the application. How to fix this problem?

  Hello

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Photo-Gallery-frequently-asked-questions

  It will be useful.

• showing almost complete - original image Windows 7

  After the installation of the new Norton 360, it did a backup to original image, before I realize what he was doing. Can I safely delete these files after their identification?

  Yes.

  Don't forget and take partition D: (recovery) of the list of enabled protection system later.

  Best regards

  ERICO

• Modified while saving the edited original image

  Hello

  I'm an absolute beginner using Camera Raw.

  I just edit an image in Camera Raw 5.7. When I had finished, I saved the edited image using a new name. Unfortunately the original image has also changed. So now I have two identical edited images with different names, but the original image disappeared. How can I keep the original?

  Best regards, Nicole

  The original image is always there... He just had added to the raw file processing settings. If you really don't want them you can either go in Bridge, edit, develop settings and click clear. But if you do you will lose all the work you put into making the adjustments... you might be better to go back in Camera Raw and create a snapshot settings them you can reset the image to its default settings.

• How to avoid the show original image of mouse?

  My problem is, athought new mouse cursor image is to see the place, but the original mouse image stand still. So there are two images are displayed simultaneously. Here is the code of the Flex document:
  
  <? XML version = "1.0" encoding = "utf-8"? >
  < mx:Application
  ' xmlns:MX =' http://www.adobe.com/2006/mxml '
  
  viewSourceURL="src/CursorCustom/index.html".
  Width = "400" height = "160".
  >
  < mx:Script >
  <! [CDATA]
  
  Import mx.controls.Button;
  Import mx.managers.CursorManager;
  import flash.events. *;
  
  Embed the SWF that will be used as
  the custom cursor.
  [Embed(source="images/hand.gif")]
  
  public var HourGlassAnimation: Class;
  
  private const ON_MESSAGE:String = "Custom Cursor ON";
  private const OFF_MESSAGE:String = "Custom OFF Cursor";
  
  private void busyCursorButtonHandler(event:MouseEvent):void
  {
  
  var toggleButton:Button = event.target as Button
  If (toggleButton.selected)
  {
  
  The setCursor() method returns a digital ID
  the cursor being defined. You can store and use this
  ID later in a call removeCursor(), or you can
  Use the static currentCursorID property of the
  CursorManager class to achieve the same result.
  
  CursorManager.setCursor (HourGlassAnimation);
  toggleButton.label = ON_MESSAGE;
  }
  
  on the other
  {
  CursorManager.removeCursor (CursorManager.currentCursorID);
  toggleButton.label = OFF_MESSAGE;
  }
  
  }
  []] >
  < / mx:Script >
  
  < mx:Panel
  paddingBottom = paddingTop = "10" "10" paddingLeft = "10" paddingRight = "10".
  horizontalAlign = "center" verticalAlign = "middle".
  
  title = "Custom cursor.
  >
  
  <!-toggle button transforms the custom on and outside slider. ->
  < mx:Button
  label = Toggle "{OFF_MESSAGE}" = 'true '.
  Click = "busyCursorButtonHandler (Event); »
  
  / >
  
  < text mx:Text = "Click the button to show or hide the cursor custom." / >
  < / mx:Panel >
  < / mx:Application >
  
  
  Someone has an idea how to control only to see a mouse to the mouse cursor image in time?
  
  Thank you
  Lucy
  
  

  Never mine, was my faul. The original image of the mouse was my remote computer. Sorry!