Emergency situation!  Modified processors, VMs does not start

Similar Questions

• HCIBench test VMs does not start

  I ran HCIBench successfully in the recent past against a VSAN data store and a HP StoreVirtual data store, now I'm trying it on some hardware Nutanix to compare, but running in the questions. I know that DHCP is working because the VM Auto-Perf-tool picked up one address, but when I run a test, the test VMs starts not in their operating system.  Just after contact with the DHCP server, it gets a "no received startup file" as shown below.  The DHCP server also does NOT show the leases issued to test virtual machines.  Any one see this before? Any suggestions?

  Thank you

  

  Just to finish this point, I don't check that HCIBench cannot be run on hardware with shared storage on ESXi Nutanix Nutanix.  I found myself just to create some VMs VDBench and executed manually VDBench, I just lost out on the OWL as automated hcibench of deployment and communication of the cool results, but at least I get my test results.

• HCIbench - vdbench VMs does not start

  Hello team Performance VSAN

  I am currently trying to run HCIbench on a VSAN cluster and have some problems. Everything seems to work fine until the moment after the vdbench VMs are deployed and configured. Opening the console they are all showing with "the operating system not found '.

  • The VMs VDbench are connected to a network segment that has a DHCP server, which I know works as the Auto-Perf-tool is picking up an IP address from the DHCP server on this segment.
  • I use the vdbench50403.zip file.
  • Validation happening on 'Performance Automation tool Configuration Page'
  • The/opt/automation/logs log appears with the following text:

  

  • The Auto-Perf-tool has 2 network cards, a routable which I can access from my browser and one connected to an isolated segment that has a DHCP server, where all the VMs vdbench are also connected to.

  Any help would be appreciated!

  Thank you

  By

  I managed to understand this one. The auto-perf-tool seems to need direct access to the hosts, i.e. the vCenter-access alone was not sufficient. In my environment, the auto-perf-tool had direct access to the vCenter which is dual homed and have access to hosts on a separate management network. Changing the vCenter so it connects to hosts on the same network as the auto-perf-tool is resolved the problem and the hcibench now works fine!

• Output Post processor does not start

  Hi all, we 11.5.10.2 applications EBS on HP - UX

  The OPP Manager does not start, aactive and target are not equal and error message below pops up the OPP log file:

  
  

  From service GSF with simultaneous process id is 1885369.

  [main] Initialization parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads = 5

  java.lang.NoSuchMethodError: java.util.Properties: method setProperty (Ljava/lang/String; Ljava/lang/String ;) Ljava/lang/object; not found

  at oracle.apps.fnd.cp.gsf.GSMServiceController.parseParameters (Compiled Code)

  at oracle.apps.fnd.cp.gsf.GSMServiceController.init(GSMServiceController.java:130)

  to oracle.apps.fnd.cp.gsf.GSMServiceController. < init > (GSMServiceController.java:66)

  at oracle.apps.fnd.cp.gsf.GSMServiceController.main(GSMServiceController.java:428)

  Exception in thread "main".

  We perform the cmclean procedure, but the problem persists, please help me.

  Thank you

  Please see if (output Post processor is not start after the upgrade of 11.5.10: Exception in thread "main" (Doc ID 362893.1)) help.

  Thank you

  Hussein

• Win2k3 comments of 64-bit does not start on 64-bit Vista, processor E6700 with VT active host

  I have a guest for Windows Server 2003 64-bit running on a 64-bit Vista with VMware Server 2.01 host.  The host system has a CPU of Core2Duo Intel E6700 and VT is enabled in the BIOS.  The guest has worked fine until this morning.  Windows updates hit the host the next day and installed Microsoft lastest set of security patches and rebooted the host.  Because then the host 64-bit does not start - I can get the BIOS on reviews, but Windows itself indicates that he doesn't see a 32-bit CPU and cannot load 64-bit operating system.

  64-bit VMware compatibility checker, said that the host is 64-bit ready comments.  I don't know if something is messed up in the comments or on the host?  It's the only host 64-bit on the system, all the other guests are 32-bit and load very well.

  See troubleshooting problems of Intel VT - x.

• Tecra A11 - 11N does not start after upgrading CPU

  Hello

  I would like to do an upgrade of the processor for my Tecra A11 i5 - 430 M 11N to a probably much faster i5 processor. I thought that the i5 - 580 M'd, but the laptop does not start when I installed this processor.

  I started the 430M, done some research on the internet and discovered that the 580 M has a very high FSB speed, and that is what probably does not work / not compatible with my machine.

  http://Ark.Intel.com/products/43537/
  http://Ark.Intel.com/products/49653
  http://Ark.Intel.com/products/49652

  and also http://ark.intel.com/

  Now, I went back to the computer store, returned the 580M and got an i5 - 560 M compared to its specifications as I've seen it would not compatible because it has the same speed of the FSB with the 430 M.

  I then later in the day tried to install this cpu as an upgrade, BUT alas!
  It STILL does not START ALSO.
  I was dumfounded left. The processors in the same line of the family are supposed to be compatible between them provided: lithography, FSB and socket type are similar.

  Or what I'm missing here?
  I did upgrades of CPU in many cases for desktop computers and laptops, and this is the first that has left me with no word to say!

  Please offer assistance or advice.

  Simon

  + The message has been modified.

  Hello

  Recommend to check this doc from Toshiba:

  + Can I put th CPU, screen, or motherboard in my Toshiba laptop? +
  http://APS2.toshiba-tro.de/KB0/FAQ35006D000RR01.htm

  Upgrading the CPU is not supported (officially).
  The point is that, even if the chipset would support the new processor, it would be possible that the laptop wouldn't start because of compatibility problems between the BIOS or other components on the motherboard and the new processor.

• Computer does not start after installing a new graphics card

  I am owner of a HP Pavilion H8-1020 with a processor intel i7 - 2600 s Windows 7 and am trying to upgrade my Radeon hd 6570 to a Gigabyte AMD Radeon R9 280 OC. I improved my diet for a Corsair CX750 to meet the requirements of power and installed with number. After the installation of the new card, which as far as I can tell is well seated in the pci slot and correctly connected to the PSU, my computer does not start.

  System powers on, all fans of begin to run including the fans on the new graphics card, but it does not begin the boot process, no entry is received at my monitors, no light on the keyboard, my OS starts loading, I can turn off the system without the delay that will flow normally. Then I reinstalled my old graphics card and the computer started as usual.

  Now, assuming that the card is not DOA, which unfourtunatly I have no way to verify, and I'd like to see if it could be another problem before going through the process of restitution. I did some reading on the internet, which helped, but did not help for a technological neophyte like me.  Now, I know a few things that could cause this problem but lack the necessary skills to determine what question is making me. What I've read, these could be possible questions:

  1: my new graphics card is not compatible with my motherboard. It's something I know now that I should have checked before buying and something I should theoretically be able to do it now, but I am at a loss on how to do it. My card is compatible with my motherboard?

  2 could be a BIOS problem. I updated my bios driver with the version provided by the HP site. I am running FRIEND 7.16 05/10/2011.  And from what I've read it might have something to do with my bios to UEFI mode and I would need to go to a legacy mode so he can recognize a new device, is it true? I am extremely wary of messing with my BIOS settings for fear of bricking my system. How can I check my current BIOS settings are and what I should change and how would approach I change them? Will one of these changes affect my system if they are not what is not causing the problem?

  In addition to these issues, anyone know any other matter which may be the cause of the problem that I should look for? Thanks for any help.

  Hello @Eric_Z,

  I can see why you are having problems with your new graphics card, and to get to the fast response that your motherboard is not compatible with the new graphics card that you have purchased. And here's why.

  Your motherboard according to the page HP Pavilion HPE h8-1020 Desktop PC product specifications is the Carmel motherboard, which has the following expansion slots:

  • A PCI Express x 16
  • Three PCI Express x 1 connectors
  • A PCI Express Mini Card x 1

  As there is no version indicated for your PCI Express x 16 it slot means that it is version 1.

  Now, your previous graphics card was a PCI Express 2.1 x 16, which means that it was version 2 and compatible with your PCI Express x 16 slot on your motherboard. However, the new card is PCI Express 3.0 and will not work in your motherboard due to a compatibility break. While the technology is supposed to be compatible there are many cases where it is not, and I'm afraid that you meet one of these cases.

  I am offering an overclock.net article entitled: the final answer to the controversial compatibility of PCIe x 16 version. where your situation has been tested and examined.

  I hope this helps. Have a great day and thank you for display on the HP Forums!

• Vostro 200 desktop computer does not start

  Hi all, our company has an old desk, Vostro 200, which works very well for a few years.  A day after the cleaning, the machine does not start with the amber light.  Fans stop, even the power supply fan stops.

  I tried:

  1. using a different power supply, it's the same thing.

  2. using another CPU, it's the same thing.

  After I unplug power 4 pin for the processor, fans start working and it seems normal but show nothing.

  I also tried out the case from the jury and put it back, in order to avoid any shortened with the case.  It does not work.

  What is the failure of the motherboard? I had a copper shortcut or circuit on the map?

  Although it is an old computer, but we do not produce a bin with other parts in good condition.

  Thank you.

  One last thing is the license Windows XP OEM's sucks it as well as the motherboard has failed because the license is listed in the BIOS?  Thank you.

  CECTT

  Thanks Bev

  1. After spending the Green and black cables, the situation is the same: the fans stop with power of CPU 4 pin; fans of work without power CPU 4 pin.

  2. after disconnecting devices PCI/video /, the situation is the same, still no beep.

  3. after remove the memory, the situation is the same.

  After checking the CPU socket, I put that there could be some not vertical pegs.  Is it possible that I folded a few pins so that it didn't?

  Thank you

  CECTT

  Yes, it is possible, the processor installed correctly, for more information, go to pages 152 to 155 of the owner's manual, if the LGA 775 is damaged, this may require a motherboard replacement.

  https://www.Amazon.com/Dell-motherboard-Inspiron-systems-compatible/DP/B003CO0WQS

  The Vostro 200 was built with two different systemboards.

  Motherboards should have engraved on it model number.

  If she says G33M02, then it only supports Core 2 Duo processors.

  If it says G33M03 then it supports Core 2 Duo and Core 2 quad cores processors.

  What are the OEM sSpec numbers and processor that was installed as a replacement?

  http://www.Intel.com/content/www/us/en/support/processors/000005554.html

  Have you tried to reinstall the original OEM processor?

  In addition, the procedure is usually to Flash the BIOS to the latest version, before the upgrade of the Vostro 200 processor.

  Bev.

• Firefox does not start (not safe mode), but uses the CPU

  I have the latest Firefox 25.0 (and the last Flash 11.9.900.117) on Windows 7 and the following behavior is reproducible. It started not too long ago.

  At first when I launch Firefox, nothing appears no matter how often, I restart. I see in the list of the process firefox.exe to 25% of the CPU, 2 x FlashPlayerPlugin_11_9_900_117.exe (CPU 0%) and plugincontainer.exe. No matter how many times I killed all of them, would not restart Firefox.

  The following also not help in this situation:

  • Starting in normal safe mode: Firefox opens a window but immediately freezes and does not respond. The process list shows the same process even if I find the unexpected FlashPlayer.
  • Disable plugincontainer: same results (just without plugincontainer.exe)
  • Uninstall Flash: Same results (just without FlashPlayerPlugin)

  The following can start Firefox only once:

  • Starting in SafeMode but select "Reset Firefox": Firefox does not start right away, however. Nothing happens, and you have to kill the process. However the very next time you launch Firefox in the normal way, it works fine (but it shows FlashPlayerPlugin.exe in the list of unopened Windows process despite the tab). Unfortunately, after closing Firefox the process (Firefox, FlashPlayerPlugin) are not deleted. I kill and the problem with Firefox do not leave reappears.

  In case you use "clear history of Firefox closing:

  • do not delete Cookies

  Note that compensation "Preferences of Site" clears all exceptions for cookies, images, windows pop up, installation of software and passwords.

  Use "Firefox > output" (Windows: Firefox/file > quit;) Mac: Firefox > quit Firefox. Linux: Firefox/file > exit) to close Firefox if you are currently doing by clicking on the X close in the title bar of Firefox.

  Create a new profile manually (and not via the reset) as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Satellite A300 - rotates but does not start

  Hello

  I have a Satellite A300. I had several probems for the boot since 2 months ago: when I want to turn on my laptop, it turns on but the screen keeps black and it does not load the screen "Toshiba Leading Innovation". 'Satellite' (to the left of the mouse) light is on (it would go only about a second then to start and then turn off) and it will turn off.

  I try again for so many times with all the possibilities: without battery, only with the power adapter, two, but it does not start. I don't know what I can do. I always Hibernate my laptop because I'm afraid of can not start it the next day.

  Could you help me? If she cares: I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.

  Thank you very much and sorry for my English written: S

  Diego

  Hey Buddy,

  > I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.
  Of course, it s always advisable using Toshiba original spare parts only, but if you notice the same problem with AC adapter only it s not related to the new battery.

  Just to make a better diagnosis: If you have connected an external monitor? The internal display is perhaps the problem and doesn't turn on and it would be useful if you are testing the situation and an external monitor.

  But this noise as a hardware problem serious and in this case, you can wait to contact an authorized service provider. Technicians professional diagnostic tools to make an accurate diagnosis and to Exchange defective equipment parts.

• Portege Z30T-a does not start

  Hello, can be here can someone help me.

  After of unknown causes, perhaps after it was switchable to hot RAM or another, all of a sudden my laptop does not start Z30T-A. How to say, after the press, there is 1 or 2 second screen sound and black fan and autoreboot. After the reboot, I see bright screen with its strong constant cooler and no action in the future.

  I try to start without battery, only with adapter ac - same situation... without ram or ssd - same situation... i ' l reconnect adapter wifi, keypad and all hardware components - same situation - no start.

  After that, I'll give this notebook to my friend, who work in the center of laptop repair.
  After a few tries, he said, which can be a problem with the bios (bios can be deleted all of one or another error, which cannot provide no boot), or perhaps by this problem with CPU.

  I chose the update of the bios, because it's the cheapest option. My friend can desolder the bios chip and via special equipment download a new.

  But we don't have bios for Z30T-A.
  He said that all versions in part support on toshiba sites are inappropriate.

  It's ok if you refresh or download it via capable of mobile work. I try to get e-mail support for toshiba BIOS, but they only have version bin and my friend say that he needs another, not bin... of course, we can buy motherboard on ebay (in our country, it's no support computers laptop toshiba) but it's expensive.

  Also, my friend told me, he can download it via the bios from another laptop same special equipment, but we do not have it.
  Maybe somebodey here can help me.

  To be honest, I can't imagine how an EPROM of the BIOS could be deleted without performing such procedure previously.
  That's why I put t think that this laptop is problem BIOS
  Your friend could be the problem but anyway

  However, you are looking for the BIOS?
  All BIOS versions can be downloaded from the Toshiba U.S. page:
  http://support.Toshiba.com/support/d...ext=1200008173

  The WinRAR ZIP file includes both Windows and disk based according to the BIOS update installation options.
  You should see the documentation included for more details.

  

  Here is the link for a direct
  BIOS version 4.00 for Portege Z3x (PT241x/PT243x/PT24Ax/PT24Cx/PT24Ex)
  http://cdgenp01.CSD.Toshiba.com/CONT...s/t241v400.exe

• Tecra 8000 does not start after the BIOS update

  From one day to the other does not start my Tecra 8000 (400 MHz/256 MB BIOS 9.30 for years). After start-up, the disc starts to turn, but the screen including the backlight remains completely black, without red logo TOSHIBA BIOS is not accessible.

  I got a new mainboard on stock, so I replaced it, and it worked. Unfortunately now my WLAN card now did not work properly. I tried several settings of the BIOS with no results, so I decided to do an update of the BIOS from 7.50 to 9: 30. After the upgrade, I get the message "ROM WRITE successful, utility completed. LEADER BIOS: Tecra8000 v 9,30 ". Because what either kept silent, I pressed the power button to restart and heard a long and many short beeps (endless). I could interrupt what pressing the powerbutton for 5s.

  After turning on again I have the same problem as described in the first line :-( I can't get into the BIOS, but I can again update (with pressed F12). Once again these beeps.

  What to do with these beeps after average BIOS update? I replaced the MoBo connector LED with pension. Processor, memory, keyboard and HD has remained the same. So, before I start disassembling the machine, please notify, your help is very appreciated.

  Hello Joachim

  I'm not a technician and don t know what the beeps but I am afraid that the BIOS chip is damaged. Because of this, the unit is completely dead. Sorry, but I really don t believe you can do anything. Maybe the new motherboard again :(

• Satellite P300-1CN - system and the BIOS does not start

  Hello!

  I have a problem with my laptop Toshiba Satellite P300-1CN. When I start my laptop does not start in Windows.
  When I tried to go to BIOS, doesn't let me do as well. I can see only the Toshiba logo. When I press F2 or F12 I received the message:

  + Enter in the configuration. Please wait + or
  + Entering the MultiBoot Menu. Please wait +.

  I tried + ESC +++ Power Buton + then + key + F1. I can see all the information:
  + Phoenix Bios 4.0 release 6.1 +.
  + Cpu = 1 processor detected, cores per processor = 2 +.
  + Intel Core 2duo T5800 @ 2.00 GHz +.
  + 3070 M RAM passed system +.
  + 2048 KB L2 Cache +.
  + Shadow system bios +.
  + Video Bios shaded +.
  + Fixed disk 0: Toshiba MK2552GSK +.
  + ATAPICD; ROM DVDRom... +.
  + Mouse initialized +.
  Press F2 to enter Setup or press F12 to enter MultiBoot Menu selection.

  but after the computer laptop just gel but the processor is still running.

  I removed the HARD drive and tried to put different the a (work laptop) - still does not
  I removed the memory and tried to put different the a (work laptop) - still no job

  I have no idea what it is causing the problem.
  I have this laptop over a period of 2 months.

  Thank you.

  > Looks like I have to make a phone call to the Toshiba Support Centre
  You must enter in Toshiba authorized service provider contact such as suggested by Luke above
  All the details can be found on the Toshiba page. (the path above will point you to the ASP database)

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Compaq 6200 PRO MT: Makes the computer does not start after upgrade CPU

  I have the HP Compaq 6200 PRO PC of MT 615114-001 motherboard and processor Intel Celeron CPU (LGA 1155). After I changed the CPU for Intel Core i5 (LGA 1155) computer does not start. He begins a minute (less than one second) and stops again. No beeps. After you have installed the Celeron back everything works fine. i5 CPU is brand new. What can be?

  In my previous post, I explained the reason it has not worked, and listed the CPU that will work.

  HP tests CPU in the laboratory and publishes a list of processors that will work in a notebook.

  Notebook motherboard BIOS has a list of processors that will work. If it is installed, which is not encoded as OK in the BIOS ROM file, then this will not work.

  Processors published (in the maintenance guide & Service for your nttebook series model) are available in models that can be deilvered in State CTO (configured to order).