EMP 11.1.2.3, workspace cannot be found in the Explorer tab.

Similar Questions

• First CC - cannot press ok on the Preferences tab after the upgrade

  First CC - cannot press ok on the Preferences tab after the upgrade

  someone had this problem?

  found the solution on another thread

  Had a problem with permissions for a folder of Adobe preferences.

  name of computer/OS disk name/users/user name/Library/Preferences/Adobe

  change folder permissions

• HP C4385 don't scan and then cannot be found by the HP Installer...

  A scanning several pages with my HPC4385 yesterday when the Scanner has suddenly stopped at halfway through a page of scanning.  After a new attempt of several times, the software tells me that scanner could not be initialized.

  I uninstalled the software and tried to reinstall and now HP and HP Setup Setup cannot find the printer/scanner at all?

  Help!

  One other thing to note is HP on the LED flashes quickly after turning the power on.

  I also tried to do a full reset by pressing and cancel at the same time and no change in behaviour

  Hi JABLand thank you for the answer.

  I recommend you to perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I recommend then perform a reset of the printer.  Return to the configuration of the system that you were before, by pressing the power and Cancel buttons, then blue, green, and gray buttons.  You can use the reset instructions below:

  Press the black 'Copy' button until the display shows "Reset Menu", then press the "Color copy" button once. Press the black 'Copy' button until the display shows "Reset partial" and then press the button "color copy".  The printer turns off.  Wait 60 seconds and power on the printer at the end of the reset.

  Please let me know how it goes.

• Cannot be found in the location or the search box; I type the words, but nothing happens when I press enter or click the search arrow

  I had the problem of the length so I downloaded Fiefox again. However, now I can't get anything. I tried the suggestion to try the Safe Mode, with disabled modules, but it is still not let me search any URL or keywords. When I type anything in a box, pressing enter or the search arrow does nothing. Help, please!

  Hi Dudica, please make sure that you do not use firefox in compatibility mode: https://support.microsoft.com/en-us/kb/292533

• I have the version 7.0.1 of firefox and cannot access the cookie settings, I get errors indicating cookies are disabled, but cannot find anywhere in the Privacy tab that allows me to manage cookies.

  I have windows XP - Pro and recently upgraded to Firefox 7.0.1 and OE I get errors from web sites on cookie settings. I can't access the cookie settings via the tab tools option and privacy, because there is no option of cookie except to erase or delete individual cookies. I could manage my cookies before but something has changed in this version of Firefox, and now it's playing a lot of features of my web site.

  See all the parameters of the story and the cookie to use:

  • Tools > Options > privacy > Firefox will be: "use the custom settings for history".
  • http://support.Mozilla.com/kb/cookies
  • https://support.Mozilla.com/kb/enabling+and+disabling+cookies

• Downloas file with firefox logo cannot be found in the computer and cannot be used for attachment to e-mail

  I have a "downloads" folder in my documents where all down loaded files are stored. Top down loaded new Firefox browser, it has built its own 'downloads'-in the program. All my downloads I receive mail electronic to the low loading in the "downloads" but when I want the attachment sent to my friends I can not excess of this 'downloads' folder of my email address but the one I've always used before the update to Firefox. How can I access it from Firefox ' downloads so I can attached to my emails? Thank you

  This has happened

  Each time Firefox opened

  Is loaded into the computer new update

  First of all, whenever the file is uploaded in Firefox, you can open the folder it's from the downloads window (see "Open the file folder" Management downloads). In this window, you can see its location.

  To restore the download location for downloads in My Documents, you can change it in the settings or reset the download folder.

  [edit] oh, and exactly how you want to download the file, you do not find later? You may be using "save the link under" or "save the Page under"?

• My Skype ID cannot be found in the directory.

  I have tried my Skype ID and also mail electronic but couldn't find me in the directory. The nickname I had set is not found either. I am registered and also appear online. My friend could not get either of these methods. I have it set to public so it can be found. It just says not: no results found. I use my microsoft account to connect. I've had people me before adding without problem. I use Skype more up-to-date. I even tried to search in my application on Kindlefire. I tried have only connected it on laptop only. Here, nothing seems to work. Please do not suggest that I ask them their email address or ID. I know about it. I want my ID to be available, so I can it add me, as he had been seized.

  It is not possible to search for your own code of Skype. This feature has been disabled a long time ago. However, your friends should be able to find using your registered e-mail address or your correct Skype name.

• Cannot view thumbnails in the Explorer in Win7

  Machine: new Toshiba P500 with Intel i7 and Ultimate 64 bit of Windows 7 home

  Move my files on the machine and I noticed that not all my files showed the photos properly.  Word documents and Excel as well as photos and videos in all folders display photos properly for medium, Large and Extra Large icons settings.  At the same time, the icon is displayed instead of the thumbnail for all Adobe PDF files.  I have Adobe Reader 10.0 installed.

  Note: the last time I met this problem was on a Windows Vista-based computer after a Windows Update (I think it's an update of .NET) has been installed.  I solved the problem by uninstalling the update and test install to hide.

  As an additional note. I made sure the "tools > Options > view > always show icons, never thumbnails" is not checked.

  Thanks in advance

  Greetings,

  There is another parameter useful to take a look at.

  Try this:

  Click on, start > Control Panel > system > top left on System Advanced Page Settings, click, > Advanced tab, performance, click Settings > highlight: show thumbnails instead of icons

  Is it verified?

  HTH

  If I brought you joy, vote! If I answered your question, click, propose as answer! > WT

• Cannot be found in the menu start - result is completely white.

  Original title: find search indexing index reindex re-indexing research research research service troubleshooting troubleshooting

  When I try to enter a search in my menu start the place where I would normally find results is completely white.

  I've looked everywhere and I can't find a solution to the problem.
  Please help me...

  Hello

  Were there any changes made on the computer before the show?

  Method 1:

  I suggest to see the links and try to run the Troubleshooter:

  Difficulty of Windows Desktop Search when it hangs or no display of results

  http://support.Microsoft.com/mats/windows_search/en-us

  Open the troubleshooter for search and indexing

  http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter

  Method 2:

  Check the link and try to rebuild the index:

  Change advanced indexing options

  http://Windows.Microsoft.com/en-us/Windows7/change-advanced-indexing-options

  Check out the link for more information:

  Improve Windows searches using the index: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/improve-Windows-searches-using-the-index-frequently-asked-questions

  Method 3:

  See the link to use the (sfc) System File Checker tool to troubleshoot missing or corrupted system files in Windows:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Procedure entry point; Cannot be found in the dynamic link library

  I installed the trial version of Dreamweaver, but after clicking on "Launch" the "Dreamweaver.exe" error message - entry Point not found is displayed. I'm in Windows 8.

  

  The error message for Dreamweaver.exe doesn't feel right at all. In fact, I would say that that said file has been damaged along the way. This could be caused by a multitude of reasons. My first port of call would be to check for malware that may be present in your system.

  More information can be obtained from what is Dreamweaver.exe? Better how to fix Dreamweaver.exe Guide error. Please note that I did not use the Dreamweaver.exe difficulty tool mentioned a few times. In fact I'd be inclined to NEVER download the tool.

  Good luck.

• What site opens in the Muse a sampled image of error report is displayed, but the image cannot be found in the active panel

  When I open my file of site in Muse I get an error message that reports an oversampled image file.

  I carefully go through each item in the active panel but don't see any error or icons with the '+' for an oversampled image.

  How trap, find or change the mystery picture think Muse are oversampled?

  Popular opinion.

  Tim

  The initial problem noted here since mid-2014 was due to a bug when a rounding error that occurs when a cause of the image resized to fire by mistake, the warning message. Quite a few releases of Muse was treated there. It is possible a similar bug exists in some other code path or there may be another problem.

  More rational than before is likely to make you reach the .muse file [email protected] as well as a link to this topic for the context.

  If the file is larger than 20 MB, you'll need to use a service such as Adobe send & Track, Dropbox, creative cloud, WeTransfer, etc. file sharing. At least initially, we should not need the related assets, just the .muse file.

  Thank you.

• FTP video .flv to my server, but it cannot be found by the browsers/Flash

  Hello. I transferred my HTML, FLASH and video to my ISP. However, when I enter the .flv url, IE indicates that the file is not found.
  
  http://www.bsrpinc.com/news/video/GWB_OPO_video3.FLV
  
  But when I go to the FTP, this is cleary and I can download it.
  
  Any ideas?

  Also, it does not hurt to give a thank you.

  Thank you. It worked.

• ITL file cannot be found or created

  When I try to open iTunes I get error, "itl cannot be found or the folder created.  I tried uninstalling iTunes and reinstalling, but it still doesn't work.  Is there any solution for this?

  Hi, Dwether.

  Please visit Apple support communities.

  I understand that you receive an error when you try to open iTunes.  While the article below is not labeled for your specific question, I recommend you have completed these steps still apply.

  If you do not see your content once you update iTunes

  See you soon

• Workspace Manager 11 GR 2: ORA-20145: "Under TENSION" workspace cannot be deleted ORA-06512

  Hi all

  I considered the possibility of use of the Workspace Manager on Oracle 11g 11.2.0.4 (Oracle Linux OS) as a way to allow developers to experiment in our Dev of the databases (s) on the changing data in application dev (for most code tables) schema support app. I used preview Workspace Manager Enterprise Manager 12 c against one of our Dev database after (briefly) examining the 2009 Oracle Database 11g and the more formal Workspace Manager Guide the developer 11g Release 2 (11.2).

  My initial work did not provide the correct results (do not ask for help on that), so I want to start by removing all child workspaces and workspace 'On-line'. However, when I try to use EM12C to remove the LIVE (which was created under SYS) workspace I get "ORA-20145: 'LIVE' workspace cannot be deleted ORA-06512: at the"WMSYS.LT", line 4994 ORA-06512: at line 2".»

  Before posting, I googled first, then questioned this forum and even the 'full search' option but have not found any other mention to this.

  Can someone help guide me to a fix? It's development, it is important for me as a DBA because it will help you avoid to create and maintain multiple copies of our data and application for each developer schemas.

  Thank you

  Ted

  I could have sworn that I replied to this a few hours ago.  Maybe the Web gremlins ate the post, maybe they will regurgitate a few hours (so apologies if it appears a second time).

  You can not remove the DIRECT workspace.  The DIRECT workspace still exists.  This is the workspace that you are in when you log in.  If you have a table without version 10 lines and activate the version, it will have 10 rows in the DIRECT workspace.  You can create children other areas of work where the table can have 9 lines or 11 and those that can be deleted, but can not be the DIRECT workspace.

  You can disable versioning on each of your tables (dbms_wm.disableVersioning) If you want to return to the State they were before that you have turned on versioning in the first place.

  Justin

• In Win 7 I get an error for various leave and- or "this action cannot be completed because the folder or the file is open in another program."

  I'm money than Win 7 Home Premium 64-bit SP1. The following information are linked to the steps to solve a persistent problem. Please read carefully and answer completely, since you asked users to report carefully on the long process of troubleshooting-advice you provided. I've been at it for six hours now in this round of troubleshooting.

  I tried to solve the continued permission errors and- or "this action cannot be completed because the folder or the file is open in another program."  This happens when attempts to cut-copy-paste------delete files (including the specific details listed below).  I searched on the Microsoft Support site to find answers to solve the problem, including the thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/in-Windows-7-getting-error-the-action-cant-be/449b2e05-8ED0-4A72-98bd-dde430d27e10?TM=1356626412321

  In accordance with this notice of sons, I emptied my Temp folder. The problem persisted. I downloaded the app 'Take Ownership' and also tried with periodic and sporadic success. It seemed to lengthen the time between recurrences of the problem - that it would allow me a half a dozen of all cutting------copy-paste and------or remove actions, until the error messages stop me to exercise that or any other action.  Then, I used the task Mgr end explorer.exe and reopen it to see if that makes a difference. For a while it worked, where I could make a few cut sporadically------copy-paste and------or delete actions. Today I'm at the point where I can preform one action, then I have to open task Mgr, end explorer.exe and then restart it to perform again a more cut-copy-paste or delete action. So, I have to return to the task Mgr and repeat the process above, for each new action I want to perform.

  I watched rained down in the above quoted thread, and followed Support Engineer Samhrutha G troubleshooting tips - method 4 - start the computer start-up in minimal mode and to use the diagnostic selective startup. In previous discussions, you have asked for advice as to what you were doing when the problem occurs, so I rated as below:

  I went into msconfig, unchecked "Load Startup items", went to the tab Serivce and allowed only half of them. He was 12 of 24 listed entries. During the tests, programs that are only open on my desk were two windows explore and Notepad to save the results. I got the following results:

  I moved the contents of a folder on my main C drive on my external drive of 3 TB. When I then tried to remove this folder on my external hard drive I got the message

  "You must be authorized to perform this action."

  You need authorization S-1-5-21-602162358-602609370-839522115-1004 to make changes to this file.

  After I clicked retry the record has been deleted. When I went to delete another folder in the same location on my external hard drive, he deleted the first time. He was then three other orders normally external hard disk.

  Then I tried to delete a file in a different location on the external hard drive and the message

  "You need give permission to delete this folder.

  When I clicked on continue what he deleted

  I cut and pasted a file from my external hard drive to my C drive. The record stuck on drive C. He pasted the folder on drive C, but the original folder remained on the external hard drive, even though it was a cut and paste. So when I went to delete the original folder that should have been cut, this message came:

  "You need permission to delete this folder.

  When I clicked on continue he grew up:

  ", You need permission to perform this action."

  You need authorization MYCOMPUTERNAME\MYCOMPUTERNAME to make changes to this file.

  When I clicked Try Again he deleted. But why he would leave the original behind if it was a cut and paste?

  After that, I tried to cut and paste a file to a location on the external external hard drive to another location on the hard drive, after I had seen the contents of that folder and went up a level to the folder parent to try the cut and paste. I received the following message:

  "Cannot perform this action because the folder or the file is open in another program

  Close the folder or file, and then try again.

  When I clicked Try Again it just repeat the error message, don't not allowing me to carry out the action and any other further reduction-copy paste and- or delete actions. I had not opened or closed all other folders, windows or applications, during the above test.

  Based on the Support Engineer Samhrutha G troubleshooting tips 4 method found on the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/in-Windows-7-getting-error-the-action-cant-be/449b2e05-8ED0-4A72-98bd-dde430d27e10?TM=1356626412321

  (same thread as cited previously) Then I went into msconfig > Services and reduced the number of items in the selective startup of a unit, as I started 11 - instead of 12 - 24 listed entries. Upon reboot, I decided to re - check msconfig. In msconfig > Services he showed 165 points. All had a check in the box next to them. These 165 points, 56 showed as "ongoing" the rest showed as stopped. It would be useful that I specifically what were these 56 entries?

  I continued with the troubleshooting test based on these settings initiated by Support Engineer Samhrutha G tips to reduce the selective startup (remember... it was 11 selected items)

  I started by I try to copy / paste a file from my external hard drive to my C drive. He has successfully completed. When I went back to the location of the original file on the hard disk external and clicked on undo move, the message came:

  "You need give the administrator permission to move this folder.

  When I clicked on continue as he moved the folder

  Then I tried to cut a file on the C drive and stick it in my external hard drive. He successfully completed the task. I then went back to the original location of the file on the C drive and tried to "Undo Move". I received the following message:

  "You need give the administrator permission to move this folder.

  By clicking on continue he grew up

  "You must be authorized to perform this action."

  By clicking on try again, just to repeat the error message and could not undo the move

  I tried to cut the entire contents of a folder on my C drive and stick it in a directory on my external hard drive. He was able to make the cut and paste but left a folder and two files back in the original location on my C drive. When I then went to cut the 3 elements he missed and move them to the location I had initially indicated on my external hard drive - for the first file he brought up in the dialogue that he was already stuck and I would like to merge, etc, that I clicked on none. the second file in the sequence that he grew up:

  "You must be authorized to perform this action."

  When I clicked on continue he grew up

  "You must be authorized to perform this action."

  You need permission from the administrator of the computer to make changes to this file.

  When I clicked on Try Again, he said.

  "Cannot find this article.

  It is no longer in C:\Projects\FolderName. Check the location of the item, and then try again.

  When I clicked Try Again he repeats just this same error message until I had to click Cancel to exit.

  The record was then only showed only two remaining elements. Because the first cut and paste involved 22 files and 3 folders, now I am unable to say which of them got ignored or lost. When I updated the location of the original files he showed that a single folder on the left and the content was empty. When I checked it now duplicated and pasted to the location of this folder on the external drive, he was there with the appropriate content. So he had left this file to the original location, but it was empty. Why this erratic behavior?

  When I went, then, remove this folder remaining from the original location, he deleted successfully. If you understand the above message, you notice that a file has disappeared.

  I now need to mention an incident b4 I started the process of solving problems today. I felt that you needed some context b4 I mention this. I had tried to cut a folder that contains 33 files and 6 records. The six files contained two subfolders whose combined total content contained 28 photos - a mixture of mp4, JPEG and mp3 - for a total of 61 files in the parent folder, I tried to cut and paste. I tried to paste the folder parent on my external hard drive. He started at the cut and paste normally 7.04 GB and towards the end, I got the message

  "Cannot perform this action because the folder or the file is open in another program

  Close the folder or file, and then try again.

  He was unable to finish when I clicked on Try Again, and I had to cancel out. However, he had removed all but one of the folders containing three files and it was not pasted into the new location. They were gone. I did a search on Win for some of the names of known files in this folder, and none appeared. Fortunately I had them on a second external drive. I plugged it to restore files, and of course that means more open task Mgr, ending explorer.exe and reopen in order to restore the files that explore had lost.

  After my results displayed above two rounds of by using a clean boot and selective startup, you can see that it is very difficult to actually diagnose the problem because it happens inconsistently. It is also very time consuming and very, very, very, very, very frustrating.

  I decided to try the method of disabling "just" thumb caching in the registry according to the advice of Robert P in the thread quotes. He said that I should go to Start > Run > gpedit.msc and "disable implementing caching thumbnails in hidden thumbs.db files" that was published of course in OK Win 7 > files, folders, and storage of the Microsoft Community forum. So I typed gpedit.msc in the search bar, and there was no instance of gpedit.msc, only setup.exe, I had to take was to gpedit.msc.  I installed it and after installation I typed again and he has not yet posted. So I rebooted. Restarted it showed up. When I went to run gpedit.msc, he brought to the top of the window with the error message group policy "MMC could not create the snap" when I looked up this article in the Microsoft Community, I found the link to the Win 7 forum, where the Star NIthyananda reported community
  "Gpedit.msc is not available in Windows 7 Home premium.  Discussion here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/when-i-open-gpeditmsc-on-my-computer-which-is/b1576a0f-348a-49D8-be70-d83d0f36e8aa?tab=AllReplies#tabs

  He then mentioned

  "If you want to disable caching of thumbnails, you can access the registry editor and go to changing the location according to the value [note: its mine incorrect grammatical syntax and not]".

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DisableThumbnailCache ".

  with no information on how actually access HKEY_CURRENT_USER

  I found the appropriate information on how to access the registry in Win 7 running regedit, with information on how to navigate to the appropriate location in the registry to disable the thumbnail cache

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DisableThumbnailCache

  but there is no entry "DisableThumbnailCache.

  I researched and found that you can add it in

  http://www.SevenForums.com/tutorials/10794-thumbnail-cache-enable-disable.html

  I downloaded the Disable_Thumbnail_Cache.reg file. After running Disable_Thumbnail_Cache.reg to merge it into the registry, I then returned to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\

  and yet, there was no entry on DisableThumbnailCache

  The second method mentioned in

  http://www.SevenForums.com/tutorials/10794-thumbnail-cache-enable-disable.html

  has been to access via the Group Policy Editor

  I searched for the Group Policy Editor in Windows 7 search bar and it showed three entries

  A folder titled "for Windows 7 Group Policy Editor.

  a zip file named "add_gpedit_msc_by_jwils876_d3kh6vm.zip".

  Setup.exe

  The "Group policy for Windows 7 Editor" folder contained just the same two files listed below it

  So, I went ahead and ran the setup.exe and then restarted. After the reboot, I did a new search for the Group Policy Editor and he grew up just three results.

  I went back on the WindowsSeven Forum and found advice in the thread

  http://www.SevenForums.com/tutorials/3652-local-Group-Policy-Editor-open.html

  Title: how to open the local Group Policy Editor in Windows 7

  The tips were:

  To search for a group policy or the registry key, value, etc., see:

  Political research group

  The link above leads to:

  "The GPS is going to move to a new end area January!

  http://gpsearch.azurewebsites.NET
  You will be redirected in 15 seconds! »

  I waited about 3 minutes and it went nowhere, so I clicked on the http link and he grew up:

  GetCategoryDependencies() - 500ServerError

  This is where I could and I am now. And I can't "simply" disable caching of thumbnails. Can I return to my workspace and all simply continue with the editing work that I do, which is to cut, or -copy-paste and or delete files that I advance in my workflow. I can't do it without opening task and then Bishop ending and re-open explorer.exe for each order, I want to achieve.

  At this point now a few hours later including writing this message, I think that a new facility would be easier, more rapid and less headaches but that will solve the problem?

  Sense my frustration?  If this is not the case, let me make it clear. It's extremely frustrating. Why Windows doesn't have a fix for this is an error permanently?

  It was mentioned in the original thread that I cited that it would be better to start a new thread and continue to add my comment to the answers already posted 138. This problem has plagued me for months. Please notify

  As you have tried many fixes and changes to the registry, I suspect that your only option is a clean installation

  And having done so don't try not to cut/copy anything other than the data in the files in libraries in any other player. Copy of records of the victory Road will result in the registry locations becoming screwed.

  And if you really need locate the lbraries on another drive will redirect the location of other libraries that animate