Empty container DAC after execution of 'New Source system Container'

Similar Questions

• Can not recover partition after installing a new operating system

  I recently bought a laptop G62-a31so and it came with windows 7 x 64, from the beginning, it could not start most of the programs, they would break everything simply, I got the idea I want to install windows vista on, which works well with my previous PC, I planned to create discs of recovery beforehand, but I couldn't be bothered when I discovered he required 4! DVD-s and it says in your manual that I can recover my system at any time of the partition. So I formatted the partition that has windows 7 on it before and installed vista, then I discovered that you have some drivers vista for this laptop, I tried to return to the status quo by the recovery of the partition, you press ESC on startup, then f11 in boot menu, but he started just vista.

  I would like to know how I could restore my system to factory settings now?

  You can try this, which works for many people (not all) >

  1.right - click on the "Computer" icon and select manage.
  2. This will launch the Microsoft Management Console.
  3. on the left side of the MMC console, click "Disk management" and it will show you all the partitions.
  4. right - click on the "HP Recovery" partition and select "Mark as Partition Active."
  5. when the warning message appears, select 'Yes' – Reboot and it will automatically start in the Recovery Manager (without pressing F11).

• After execution of the new update (2015.2), I can't read the imported video. Rendering seems to be a color chroma confused. I need help NOW please

  After execution of the new update (2015.2), I can't read the imported video. Rendering seems to be a color chroma confused. I need help NOW please

  FAQ: Why am I getting yellow and red lines running through my images on pause?

  Update of El Capitan.

• How to recharge my hard drive with photos that are stored in iCloud.  After installing a new hard drive, there's no pictures found in the Photos, and I get this error "cannot find system Photo library named"Library.photoslibrary Photos".

  How to recharge my hard drive with photos that are stored in iCloud?  After installing a new hard drive, there's no pictures found in the Photos, and I get this error, "could not find the picture of system library named"Library.photoslibrary Photos".

  Soon as your App Photos or iPhoto lost track of your photo library, or there has not been migrated from your old drive. You can create an empty library and probably enable iCloud photo library for photos to upload to the cloud.

  Designate a library in pictures - Apple Support System

  

• TestStand 2014 F1 Patch removes the report itself after execution of finishing

  Hi all

  today I installed the patch 2014f1 TestStand and after that, I recognized that TestStand removes my reports of ATML5 by itself after execution of finishing.

  I'm active On-The-Fly Reporting and store reports in different places for each sequence. This place, I determine in the PREUUT callback.

  During execution, I see that the report is generated exactly at the specified location, but if the execution is complete they will be removed immediately. I don't know why?

  Do I have to remove the f1patch? Someone at - it the same problems?

  I will be happy if someone has a suggestion what to do.

  Thank you very much!

  Hello

  I created a sample file to show the effect (see attachment). I think I found the problem and it's my fault.

  I have seen that it is me who deletes files (SetReportPath.vi). Before you begin the statement I want to erase the reports directory.

  When I work with my custom GUI LabVIEW (uses parts of the SimpleUserGUI-example of TestStand, singlePass-execution) everything works fine. The SetReportPath.vi removes the old reports and after the execution of this new report remains in this directory. PreUUT-reminder, therefore, seems to be executed only once. The same thing happens if I use TestStand SequenceEditor for the execution of the sequences and use there "SinglePass.

  When you use the SequenceEditor TestStand to perform sequences in Mode TestUUT the new report is deleted after that first Test USE ended and I click on stop in the USE Information-dolls. I think the PreUUT callback is called here and SetReportPath.vi deletes my report. This seems logical.

  With this routine I'm working now for two months and I noticed that the "deletion" just after the installation of the Patch TestStand2014f1. So I think that there are some changes by calling PreUUT-reminder, but I'm not sure. Maybe you can check this.

  Thank you!

• After downloading the new version of the program unexplained antivirus, file db called "thumbs" on the desktop

  After downloading a new version of my antivirus program (rising), restarted my computer, there was a file of database on my desktop called "thumbs".  I don't know where it comes from or where it should be!  When I went to remove it out of the office, I get a box that says "a file of database is part of your operating system and if you delete it you could cause damage, you're sure you wwant to remove?  of course, I said no, but I can't seem to get rid of it.  I even uninstalled the program updated and who does not get rid of it.  I also tried to restore the system to a previous point, but I get a message that the system restore is incomplete, try to choose another date, but no other dates or hours are no longer works!  Help

  Thumbs.DB is a normal part of Windows, and has nothing to do with your antivirus program.  It is a hidden file that contains thumbnails of the pictures stored in a folder (and the office is a folder).  It is safe to delete the Thumbs.db , because Windows will automatically re - create if necessary.

  To not see the file, go to Control Panel > Folder Options > view and select show not the hidden files and folders .

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Tests for insert after execution of the ApplyMRU

  Apex 4.0, tabular forms.

  I have 2 tabular forms. First is a master. Second is a detail. On pages separate.

  I would like to automatically redirect to the detail, if a new record is inserted on the master.

  I thought that maybe I could test #MRI_COUNT # for 1 after execution of the APPLYMRU.

  So I.

  1. establish a process after APPLYMRU that retrieves the high key out of the master and update a page with the value element.

  2 set up a branch to call detail and set a page element in detail to the master page to the #1 element.

  Tried to make subordinate them to point value #MRI_COUNT = # = 1. Neither the fire.

  Is the concept of test #MRI_COUNT # wrong? Is there a better way to do it.

  Thank you!

  I came up with a solution that works. Not very elegant. A little brutal. But it works.

  1 insert a PL/SQL block process that runs on submit before ApplyMRU. Captured key high on the table. Moved to Pxxx_OLD_KEY.

  2. Insert a PL/SQL block process that runs on submit after ApplyMRU. Captured key high on the table. Moved to Pxxx_NEW_KEY.

  3. put a branch to the detail page that has unwound on condition that Pxxx_OLD_KEY! = Pxxx_NEW_KEY and SUBMIT button. Past Pxxx_NEW_KEY to the details page.

  If there were updates only the front and after the key would be the same. If REMOVE the button has been pressed the direction would not run.

  Not particularly proud of it. But it works so far.

• Create/remove the container following the event full/empty container

  Mr President.

  I'm creating a simple editor. now, I want to create a new container each previous time container is full with text and/or images. I also want to delete if it is empty. Can you help me event that will be useful to make these two

  Thank you

  Hello Raja

  You must do the following

  Add

  If (textFlow.flowComposer.getControllerAt(textFlow.flowComposer.numControllers-1).calculateH eight() > textFlow.flowComposer.getControllerAt(textFlow.flowComposer.numControllers-1).comp ositionHeight) {}

  create the next controller

  }

  To remove

  {If (textFlow.flowComposer.getControllerAt(textFlow.flowComposer.numControllers-1).calculateH {eight () == 0)}

  remove the last empty container
  }

• Why can't I retrieve my favorites after installation of new Firefox blank even though I have the key to the synchronization?

  Before I Change my old BONES, I created an account on Firefox Sync to save my favorites, after the installation of the new operating system windows 8.1 specifically and configure Firefox new Virgin "29.0.1", and then try to recover my data using my sync key that I understand that I can not because the system has changed, please I need support immediately.

  To access the data stored using the old version of synchronization, you must install a version of Firefox 28 and restore your data from the server.
  After doing this, you can upgrade to Firefox 29.0.1 and use the new synchronization version.

  • http://download.CDN.Mozilla.NET/pub/mozilla.org/Firefox/releases/28.0/

  See also:

  • https://support.Mozilla.org/KB/how-to-update-to-the-new-Firefox-sync

• How to complete the implementation of process after inserting the new sim card to unlock the phone

  Try to unlock the phone more 6s with ATT, but do not know how to perform the implementation of process after inserting the new sim card. I got the unlock code confirmed att.

  After the unlock code is confirmed, you will have to restore the unit to the factory via iTunes settings.  He must inform you that the device is unlocked, THEN you change sim cards.

• PC Pavilion laptop: no sound on Pavilion g6 after installing the new battery CMOS

  I have a Pavilion g6z - 1 d 00 CTO Notebook PC, model A2F43AV number.  It came with Windows 7 Home Premium, and I upgraded the operating system to Windows 7 Pro (64 bit).

  The problem is that I did not sound, either through headphones or the speakers even if the Volume is set at 55. I first noticed the audio problem after replacing the CMOS battery, as the laptop is 4 years old and he gave me intermittent wireless connectivity problems.  After installing the new battery CMOS, I noticed the wireless driver was missing and downloaded/installed.  Everything was fine except the audio.  Then I reset the BIOS but nothing there as the BIOS version is v.49, and it is the most recent.

  I have also downloaded/installed the driver audio and rebooted the PC.  Still, there is no noise.

  Finally, I have checked the audio drivers and the reporting system they work without any problem.

  What should I do next?

  Thanks, Terry

  @Terry57

  Thanks for the reply,

  I was under the impression that these links would take you to guide step by step, however, it seems that they do not work,

  However, I have provided details below:

  To perform a hard reset on a computer equipped with a removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  5. Remove the battery from the compartment to batteries.

  6. Press and hold button power for about 15 seconds, remove any residual electric charge capacitors that protect memory.

  7. Insert the battery and plug the power adapter into the laptop, but do not connect peripheral devices.

  8. Press the power button to turn on the computer.

  9. If a boot menu appears, use the arrow keys to select start Windows normally and then press the Enter key.

  10. After you have reconnected each peripheral device, run Windows Update and HP Support Assistant to update all device drivers.

  To perform a hard reset on a computer equipped with a sealed or non-removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  To perform a system recovery, this link should work: click here

  Keep me posted for any technical assistance,

  Kind regards

• Want J010dx m7: windows will not start until after full recovery of the system with new HARD drive

  Hello world

  I need help here.

  My HP envy m7 J010dx works perfectly with my original hard drive (1 TB).

  I am preparing a second HDD (NEW 320) as backup.

  I took off the Moose HDD (1 TB) and replace it with the NEW HARD drive (320GB) and try to do a full recovery of the system with the HP recovery DVD.

  After full system recovery and laptop computer needs to be restarted in order to continue, the laptop keeps restarting on the logo of windows 8.

  I think it says device not found Boot. Also a test using the UEFI tool material HP and all pass.

  Replacing the NEW HARD drive with the original of the old HARD drive and it start normally.

  What can go wrong here in this case? Thank you very much for the help.

  Concerning

  John

  OK, I read through the thread and this is my point of view on this based on works including restore process with the user created a recovery (UCRDs) media which the user indicated that they used.

  If you just want to jump to the conclusion at the bottom, you can see my opinion. If you want to know 'why' Please read the entire post.

  Model No.: m7-j010dx

  Product #: E0K83UA #ABA

  Ships OS: Windows 8 (64-bit)

  Recovery HP part No. Kit: 730336-002 (3 DVDs + extra)

  User replaced the HARD drive with a 1 TB hard drive 5400 RPM with HP ProtectSmart hard drive Protection a new hard drive is a Seagate Momentus 7200.4 ST9320423AS 320 GB 7200 RPM 16 MB Cache SATA 3.0 GB / s 2.5 "Notebook internal hard drive.

  With the help of UCRDs sent media recovery media (SSRDs):

  When the UCRDs are created, only the drivers for the HW operation (this is a critical point, that I will look later) are burned to the user created a recovery media.  Consider this a snapshot of the current HW, the base drivers and software applications.   If you change the HW on your laptop or desktop where the additional device requires a different driver for these features, a few questions you might - recovery process could stop because he can't find the right driver, a blue screen, a lack of start-up or other unstable system.

  A few years ago, I had a PC that would not recover because the Blu - ray (ODD) optical disk drive did not work.  I replaced the WEIRD Blu - ray with a generic DVD/CD burner into the new part of Blu - ray is presented.   I got the PC using SSRDs thinking I would put some time and just install the Blu - ray after the PC has been recovered.   The PC recovered and when the new Blu - ray showed I installed the unit and guess what?  All PCs have shown in Device Manager and applications was a generic ODD - no Blu - ray capability and ability to read Blu - ray content in the default HP provided for multimedia applications delivered with the PC.  Applications were there but no Blu - ray capability.

  Huh?  It looks that I did not put any time at all.

  I inserted the new Blu - ray ODD and distributed recovery with the HP SSRDs.

  After recovery, I had all the Blu - ray drivers and applications supported Blu - ray.

  The difference between UCRDs and SSRDs:

  UCRDs provide a glimpse of what is installed and functional both disks are created.

  Version Digest of the player on what is happening with SSRDs to retrieve a PC (before Windows 10):

  SSRDs have all the drivers for all the HW and SW qualified for the unit.  There may be several drivers for hard drives, different types/screen resolutions, sides, etc.  Based on the characteristics of the specific laptop / desktop a process is run called "Do / don't.   After entering the recovery SDRD, the Notebook media boots to Recovery Manager.  The first step is a raw copy of all the contents of the disc on a temporary partition.  Following the Do / do not process looks at the characteristics of this specific unit and remove all other drivers and applications not used by this device.  Drivers and the only successful applications are the features supported.   And then, the new operating system and recovery partition is created.   The PC end recovery of cleaning process and restart the laptop / desktop. And, Yes, you guessed it, if you create the user created a recovery media, you only have the drivers for HW devices and applications of HP on the PC at the time.

  So, that being said, what could be the cause/solution?

  Hard drives can be different enough so that a different driver (not the UCRDs) is necessary for the newly installed HW.

  The SSRDs are supported on the new HARD drive installed?

  I don't know, I have an office boy, and I have not tried on this model of laptop.

  If you have / acquire SSRDs, I recover the laptop with the new installed HARD drive and see if it works.  It may or may not.  I don't know what drives were qualified for this laptop.

  If this does not work, the last option is cloning via USB connection (old HARD drive in the PC, new HARD drive connected to a USB 3 via the SATA Adapter (dongle) USB port, install or download software cloning and cloning the old HDD to the new.)   I just did this on the two older Windows 7 computers laptops using a SanDisk Ultra kit.  He has worked on both units.

  Conclusion:

  I don't think that the problem is caused from a HARD drive of 1 to a 320 GB HARD drive, as it meets the minimum specs for a complete installation.  I think the problem is related to the use of UCRDs to retrieve and the UCRDs do not have the HARD driver/firmware/application disc.

  But then again, I know.

  I am an employee of HP...

• latest titles featured at the helm of the bbc. don't want news source. can I get another?

  When I click on the latest titles, which is one of my modules, the news source is the bbc. Since I am not interested in reading the news of the bbc website, can I replace it with another source of news of my choice?

  You can subscribe to your favorite information source if they have an RSS feed. It usually has an orange logo.

  Simply click on it and add it as a live bookmark.

  (i.e. the RSS of CNN)

• After downlading the new version of iTunes, it will not be open.

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  I have a TOTAL disaster. After downlading the new ITune prgram, it doesn't let me open it. I tried to reinstall it 3 times and then to restore the previos versions and it is still has not opened. Now, I installed again new version of ITune and when I click the icon, it begins to 'think' and then it stopped without any result and leaves open.

  HELP.how can I solve it with all my songs can not opened and played.

  Liya

  Hi Liya,

  Windows operating system you are using?

  You can view the following Apple support link and check if it helps to solve the problem:

  iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues

  If the problem persists, you could get in contact with Apple support for further assistance:

  ITunes support

• Empty string returned after receipt gpib

  Nobody knows why, I would periodically get an empty string returned after the issuance of a receive().  It is originally a big delay in my program that I can't really afford to have. The delay occurs while the front desk manages the empty string. This sequence works fine most of the time.

  VB code:

  Public void GetData (GPIBAddress, SendString) As String
  Dim ReadThis AsString, RPD As Integer, ReadTemp As String
  read:
      
  Call Send (0, GPIBAddress, SendString, NLend)
  Wait (500)
  Call ReadStatusByte (0, GPIBAddress, RPD %)
      
  ReadThis = Space$ (140)
      
  Call Receive (0, GPIBAddress, ReadThis, STOPend) I get an empty string here, not always.
      
  If Trim (ReadThis) = "" then to correct, I issue this sequence.
  Call DevClear (0: 26)
  GoTo review
  End If
      
  GetData = ReadThis
  End Function

  OR SPY:

  See attachment.

  I'm talking to a Keithley 2612.

  I use NI488.2 2.73

  In your code snippet, I see where you made a ReadStatusByte, but the result is not checked. When considering the capture of Spy file, where the reception work, the ReadStatusByte returns the result of "0 x 04", as noted in the attached bitmap, ReadStatusByteWithMAV.gif. This result is known as the VMR (Message available) bit. If 4 (MAV bit) Bit is set, which indicates that there is something in the output queue which can be read. Information about the parameters of the ILO for a Keithley 2612 can be found starting on Page 655 by the section called, Status byte and service request (SRQ) in the reference manual. Here is a link to the reference manual:

  http://www.Keithley.com/data?asset=52057

  In the case of the reception fails (line 63 in the capture file), result of the previous call of the ReadStatusByte was '0x00' (as shown in the attached picture, ReadStatusByteNoMAV.gif), which means that there was nothing in the output queue to read.

  After a ReadStatusByte, you should check the result to see if there is something in the output queue to read. If the result is "0x00", then you can probably do something like add a delay and keep control of the ReadStatusByte again until the ReadStatusByte is back with 4 bits set. When Bit 4 is set, you can do a front desk to read the output queue.

  Hope this information is useful.