Tiara add a channel programmatically

Similar Questions

• Add midi channel to a platform of guitar?

  IM using MainStage for a platform of guitar.

  Ive got an Apogee Gio for an analog interface and also using a Fishman Triple Play for a MIDI controller.

  In Mainstage, I wish I had a hybrid analog / noon entered, so I can combine something of the reservoir of the sample and the ordinary guitar pedal.

  Is it possible to add a bunch of midi channel available to guitar rig? can someone wake me through it?

  Hello

  atracksler wrote:

  Is it possible to add a bunch of midi channel available to guitar rig? can someone wake me through it?

  Yes

  (A) in layout mode, add a MIDI activity monitor and assign it to the MIDI from the Fishman. You can name.

  (B) in edit mode, select the hotfix that you want to add a software for instrument channel. In the area of the channel strip, click on the + at the top on the right and add a channel of the instrument (with the Fishman as input).

  (C) loading of sounds/instruments to be used.

  You could also simply start by loading an Instrument patch top try on things without the MIDI guitar (audio).

  TDC

• Add a channel CJC for thermocouple

  Hello!

  I'm looking for a suitable temperature measuring device to add a channel of temperature that I will use as a reference channel for my X-Series DAQ Multifunction (USB-6353).  Ideally something that was small and had 3 or 4 terms (power and power) would be nice.  Like a little OCD packaged IC.  Something that can be easily connected to the Terminal Board connections and the temperature around these output connection is what I'm after.  Maybe an RTD?  Mega Kudos for reference numbers.

  Thank you for your comments,

  -Nic

  NIC:

  An RTD would need a precision current source, here are a few basic chip sensors:

  http://media.digikey.com/PDF/data%20Sheets/Fairchild%20PDFs/FM50.PDF

  http://www.analog.com/static/imported-files/data_sheets/AD22100.PDF

  http://datasheets.maximintegrated.com/en/DS/DS600.PDF

  -AK2DM

• CAN frame channel Conversion Library - add new channel will not convert on channel

  I hit a roadblock with the Conversion CAN frame v1.0.2 channel library.  I don't think I properly use the 'Add New Channel' vi because it always causes the frame on the canal to fail.  The channel to the conversion of image works fine.  I joined the Panel front and a simple example block diagram.  This VI returns the following error during the conversion of the chassis on the channel:

  Error 8702 is produced to convert image to Channel.vi

  Possible reasons:

  A call to the library met with a null pointer.
  Ensure that all entries in the VI have a valid value.
  In the case of tables, make sure the table is not empty.

  Any help would be appreciated!

  Thank you

  This issue is resolved by upgrading to the Conversion CAN Frame Channel 1.0.3 library and place the frchconvlib.dll file in the C:\Windows\system32 directory.

• Cannot add new channel - tiara mΘmoire

  Hello

  I loaded a chunk of data to my tiara. I've got 92 groups with approximately 740 channels each and a Channellength with about 1000.

  Now I can't do anything in tiara

  When I try to calculate a channelaverage betwenn two channels, I get the message "Die gewunschte Kanalmenge nicht but werden konnte. I can't yet do ChnLinGenImp.

  Is there a way to increase the memory allocated to the tiara with a parameter? Or is it just too much data to all the...

  Here is my systeminfos:

  Tiara 12.0.1 SP1b

  1.410.700K RAM usage

  Operating system: Win7 Enterprise SP1 64-bit

  CPU: i5 M520 @ 2.40 GHz

  RAM: 4 GB

  Kind regards

  Martin Kozlowski

  Hi Martin,

  TIARA has a maximum global chain of 65335 counter (2 ^ 16).  Based on figures you provided, it looks like you're bumping into this hard limit.  Would it not possible to load the part of all of the data in the data portal and do your calculations in steps?

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• create global channels programmatically

  Hi all

  My question has to do with daqmx.

  I want to know if theres nothing to create the global channels or tasks programmatically without using the wizard of max or daqmx

  the usual procedure is to create global tasks or channels using the wizard of max or daqmx and then add them to your tasks programmatically.

  I want to avoid the use of max here and create channels by program that can be used or called later.

  You can use the task of saving DAQmx or DAQmx save Global Channel screws to register programmatically.

  http://zone.NI.com/reference/en-XX/help/370469AA-01/lvdaqmx/mxsavetask/

  I agree with Dennis, however, almost all the tasks of data acquisition is possible using the standard functions.  You might want to take a look at a few examples of data acquisition by going to help > find examples > Input and Output material > DAQmx.  I always start by these examples, and change them if necessary.

• NI DAQ physical channels programmatically set

  If I read the assignment of channels to a configuration file (for example 9205 AI0:AI1), how can I create DAQ tasks using the corresponding physical channels in labview?

  See the attachment for an attempt to more simple

• Definition of channel programmatically in max scale

  I'm trying to define a new scale for multiple channels in max. Currently, I have 8 channels to max and which could lead to 32. I need a way to define the balance for these with my program, I use the cDaq and pci-50xe acquisitions for now, everything is entered analog. Basically, I'm trying to write a program to do the balance for each channel, it should be fairly simple. I can't create all scales needed before running because there are too many different sensors. I want to do it this way, rather than creating a custom scale so that I can have multiple channels in the same task that all have different scales.

  Ah.  you're really talking about application "Calibration factors" to your specific sensors. right (sort of a poor man TEDS)?

  in this case, I use a scale of 'Master' "MyLoadCell" that defines the units and provides a "Nominal" scale and apply to the individual gain and offset each sensor via a scale property node.  You have several ways to store this information in your system.  Named MAX scales can work well in your case and the DAQmx > advanced > configuration scale palette offers two options to get these properties applied to the scale.

• Add custom channels (OEM information) in system properties

  Hello

  I AM PRABHA OF THE UNITED ARAB EMIRATES.

  I AM TRYING TO ADD OEM INFORMATION IN MY COMPUTER PROPERTIES WIN7 32 / 64-BIT, BUT I SEE NO CHANGE OR WILL NOT DISPLAY MY ENTRIES. IF ANYONE CAN HELP?

  Logo	*	REG_SZ
  Manufacturer		REG_SZ
  Model		REG_SZ
  SupportHours		REG_SZ
  SupportPhone		REG_SZ
  SupportURL		REG_SZ

  4. exit the registry editor.

  Hello Prabha,

  Thanks for posting your query in Microsoft Community.

  Please contact your manufacturer for additional assistance, because it requires an advanced with the OEM information troubleshooting suggests.

  Please do not hesitate to write to us about problems with the Windows operating system.

  Thank you.

• Want to add Action Listener programmatically on a button created Progammatically.

  Scenario is,

  I want to add the listener of pressing a button I've manually created and added to the page over time.

  	public void editPanel (ActionEvent actionEvent)
  	{
  	System.out.println ("invoked");
  	}

  This is my code to the action listener, she is hard-coded

  Hey Zaid,

  Try the following code.

  1. create the inner class on your managed bean.

  private class MyListener implements ActionListener {

  {} public void processAction (ActionEvent actionEvent)

  write your action listener code here...

  System.out.println ("invoked");

  }

  }

  2. then add actionListener class to your button.

  Addpopup RichCommandImageLink = new RichCommandImageLink();

  addpopup.addActionListener (new MyListener());

• Programmatically add or remove slider

  Hello

  I use slide System Horizontal pointer.

  

  And I want to add the slider programmatically. I know how to add this manual, but I want to add/remove the cursors programmatically.

  

  Could you please help me?

  
  

• Programmatically add a reminder of the sequence in a sequence file

  How to add sequence recalls programmatically to a main sequence?  For example, to configure, I get a table that tells me as the sequence files to run for each test instance.  I want to call these files in sequence as a reminder of the sequence on the main sequence.  I don't want to use the flow regulator because there are a large number of sequences for this ATE, and the test list may develop in the future.

  Thank you

  Shari Chen

  Symmetricom

  Thank you after the publication of themsg, I found sequence generator tool, and it was exactly what I was looking for!

  Thank you again...

• Add channels NoValues

  Normal 0 false false false MicrosoftInternetExplorer4 / * Style Definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-parent:" ";" mso-padding-alt: 0 cm 0 cm 5.4pt 5.4pt; mso-para-margin: 0 cm; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman"; mso-ansi-language: #0400; mso-fareast-language: #0400; mso-bidi-language: #0400 ;} "}

  I'm trying to analyze some of the data that have been collected by 2 devices. The data have breaks inside and values aren't monotic. I generated a new timeline and ChnMapLinCalc to map the data monotic more on my new calendar. This has produced three channels, each with NoValues but with data at the right time. When I use ChnAdd to add these channels I have all NoValues like NoValues + data = NoValues. How can I add these together as if there was no NoValues?

  Hello Roger,.

  It seems that "Process NoValues" in the DIAdem ANALYSIS service to help you.

  Set up the ANALYSIS Panel, select 'functions of channel' and the last function it is called "NoValues process".

  The 'Replace' option is the one you want. Just replace the NoValues with '0' and you should be good to go for your calculation.

  Let me know if this helped,

• How to add programmatically ADF Faces of the components within a page of fragments.

  Hi all
  I use Jdeveloper 11.1.2.1.0
  I want to add links command programmatically in the fragment of a page based on a Table DB & Accordians.
  How can I do?
  
  Thank you
  Puneet

  See if that helps... http://oraclearea51.com/browse/theatre/62-sudhakar-mani/video/596-create-oracle-adf-rich-component-programmatically-from-managed-bean-using-ppr.html
  Basically, you need to add children under a root like a panelGroupLayout or similar component.

• Get a ref to a newly-created channel script

  I'm a noob to scripting tiara and it's been well over a decade since I did any significant vb coding, so please forgive me for what is inept.

  I use the function ChnFiltCalc to operate my data by a low filter pass, and this function automatically creates a new channel containing the signal filtered at the end of the group.  In the data portal that I would move the new channel so that immediately follow the unfilitered channel, it is, however, ChnFiltCalc is not a reference to the new string.  In addition, the new channel may or may not use the name I assigned to it (Tiara will add a number if it's a duplicate name) and based on what I read in the help files, it may be the element with the largest index.

  Is there a standard way of robust way get a reference to the new channels created by the functions?

  Hi Rose Dalban,.

  My personal preference must first obtain a channel object variable when you create the target channel in the Group and the location of the channel (TargetChannelIndex) that you want to be (where the name of the desired channel will be unique), then go this channel object variable to the order of ANALYSIS in his channel of target setting.

  ' Set Group = Data.Root.ActiveChannelGroup
  
  ' Set Group = Data.Root.ChannelGroups (1)
  
  Set Group = Data.Root.ChannelGroups ("DesiredGroupName")
  
  Set RChannel = Group.Channels.Add ("result Channel", DataTypeFloat64, TargetChannelIndex)
  
  Call ChnFiltCalc (XChannel, YChannel, RChannel,...)

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments