Enable logging in EM

Similar Questions

• Unable to enable logging

  Hello world

  I guess to partition my new WD external, but I couldn't do that thanks to disk utility asking "Enable logging" on the menu file, I can't do that because it is gray as image. Please help me, how can I partition my WD.

  Thank you very much

  If you look at the dialog box in your image, you will see that you have already selected the logging. Look at him "Format:" falling... He said 'OS X Extended (journaled).

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

• Installation through dbca.rsp - unable to enable logging of archive during installation

  I am trying to perform an automated installation of Oracle 12 c DB.

  In the same dbca.rsp file that is provided with the installer of Oracle 12 c I don't see a place where I can specify to enable logging on the installed database and the location of archive logs archives.

  In addition, below parameter when specified makes no different to the installer and it takes just the default location every time.

  #-----------------------------------------------------------------------------

  # Name: RECOVERYAREADESTINATION

  # Data type: String

  # Description: Location of the data file

  # Valid values: location of the recovery area

  # Default: $ORACLE_BASE/flash_recovery_area

  # Mandatory: No.

  #-----------------------------------------------------------------------------

  RECOVERYAREADESTINATION = "Z:\oradata\flash_recovery_area\".

  Am I missing something? Thank you

  Very well your log file shows

  1. [main] [20:19:46.788 IST OF 2014-05-09] Lsnr headset [NetworkUtils.getOneLocalListenerProtocolAddress:3111]
  2. [main] [20:19:46.788 IST OF 2014-05-09] [HAUtils.getCurrentOracleHome:493]  Home of the Oracle system property: C:\app\oracle\product\12.1.0\dbhome_1
  3. [main] [20:19:46.788 IST OF 2014-05-09] [CmdToolUtil. [ : 250] m_winDllLoc = C:\app\oracle\product\12.1.0\dbhome_1\bin
  4. [main] [20:19:46.788 IST OF 2014-05-09] [GETCRSHOMEUtil. [ : 93]  ToolName: getcrshome.exe - tool rental: C:\app\oracle\product\12.1.0\dbhome_1\binTool dependencies: [Ljava.lang.String;@4a53fb57 ]
  5. [Thread-18] [20:19:46.804 IST OF 2014-05-09] [StreamReader.run:61]  In StreamReader.run
  6. [Thread-17] [20:19:46.804 IST OF 2014-05-09] [StreamReader.run:61]  In StreamReader.run
  7. [main] [20:19:46.819 IST OF 2014-05-09] [CmdToolUtil.doexecuteLocally:884] retval = 1
  8. [main] [20:19:46.835 IST OF 2014-05-09] [CmdToolUtil.doexecuteLocally:885] exitval = 1
  9. [main] [20:19:46.835 IST OF 2014-05-09] [CmdToolUtil.doexecuteLocally:886] rtErrLength = 0
  10. [main] [20:19:46.866 IST OF 2014-05-09] [CmdToolUtil.doexecuteLocally:892]  Unable to run the command. Command = env [C:\app\oracle\product\12.1.0\dbhome_1\bin\getcrshome.exe] = error = null]
  11. [main] [20:19:46.866 IST OF 2014-05-09] [HAUtils.getHASHome:1398]  Could not get at home.
  12. PRCT-1011: cannot run 'getcrshome.exe '. [Error:]
  13. [main] [20:19:46.866 IST OF 2014-05-09] BestSoFar = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)) [NetworkUtils.getOneLocalListenerProtocolAddress:3263]
  14. [main] [20:19:46.866 IST OF 2014-05-09] Host [NetworkUtils.getOneLocalListenerProtocolAddress:3276] = null hostParam = 10.94.153.35
  15. [main] [20:19:46.866 IST OF 2014-05-09] [NetworkUtils.getOneLocalListenerProtocolAddress:3342] bestAddrSoFar = (ADDRESS = (PROTOCOL = TCP) (HOST = 10.94.153.35)(PORT=1521)) return
  16. [main] [20:19:46.866 IST OF 2014-05-09] [NetworkUtils.getOneLocalListenerProtocolAddress:3402]  Return bestSoFar = (ADDRESS = (PROTOCOL = TCP)(HOST=10.94.153.35) (PORT = 1521))
  17. [main] [20:19:46.866 IST OF 2014-05-09] [NetworkUtils.getOneLocalListenerProtocolAddress:3402]  Return bestSoFar = (ADDRESS = (PROTOCOL = TCP)(HOST=10.94.153.35) (PORT = 1521))
  18. [main] [20:19:46.866 IST OF 2014-05-09] [NetworkUtils.isDefaultHostName:2793] lsnrHost: 10.94.153.35 ==> ip address: 10.94.153.35 host: oracle12c ==> ip address: 10.94.153.35
  19. [main] [20:19:46.866 IST OF 2014-05-09] Listener [NetworkUtils.getLocalListenerAddresses:1317] [0] = address of the listener = null
  20. [main] [20:19:46.866 IST OF 2014-05-09] [StepContext.setListenersToUpdate:928] needLocalListener = false

  Your listener is not configured correctly, your server is missing a valid host name or your listener is missing entries of the database...

  Well, I think you leave this parameter empty, like the YES program automatically detect the listener installed on the host computer and to configure!

• How to enable logging in OBIEE 10 G

  I have the LDAP authentication in OBIEE 10 G and users reside only in LDAP.
  I have a requirement to enable logging for some users. Can suggest me what steps are necessary. I created the user in the RPD and activated the record for this user. Kept the same ID user in LDAP. I still don't see the newspapers.

  Given that you want to enable loglevel to few users, you have to go something similar to the below

  You block Init suppose to be like
  in case: the user to 'a ', ' b', then 2 ELSE 0 END
  the LOGLEVEL variable value

  Score pls correct/good

• Misleading message on Vista? (: "Enable logging is also accessible by...") " ? )

  Vista Home Premium

  My connection failed then I got this message:

  "The logging options are also accessible by clicking on the menu item of the preferences of the remote access UNDER the Advanced Menu OF THE network connections folder."

  If I click Start on the left corner and type in the search box to "enable journaling"... "Remote access preferences..." "The network connection file", it can be found only = no matches to your search items.

  As long as there is no "network connection folder..." I went to the "network and sharing Center" and there, we have:

  -View computers and devices

  -Connect to a network

  -Set up a connection or network

  -Manage network connections

  -Diagnose and repair

  -See also: Internet Options

  Windows Firewall

  As we can see, there is no Menu "Advanced".

  I clicked on Internet Options and went to advanced.

  There there is no "Remote Access Preferences" or "logging".

  I looked on Google and Bing:

  -They talk only about logging to start.

  Is this a misleading message?

  You don't have to use the classic view (I do not use it, I prefer the modern categories), but however you prefer will work fine.

  The menu bar (file |) Change | View | Tools | Advanced) required by pressing the ALT key to see since 2006 when Vista came out (and even all the way back to XP in Internet Explorer).  But alas, you reason - it was like 8 years old doesn't mean everyone knows as if by magic and those directives should not assume you know where is the menu.

  Also - you are not see, but you have mentioned that you are inside the "network and Internet", and you must be inside "Network connections" as my show in the picture.  They are in fact two spaces of difference.

  Here's an easy and direct way to ensure that you are in the right place:

  1. Press + R to display the race
  2. Type ncpa.cpl (that's the cammand for network connections Panel)
  3. Press OK to open the network connections folder, and then press Alt to display the menu bar with the Advanced menu.

• How can I enable logging in 10.11 El Capitan?

  I don't see a button in this version of disk utility.

  No more, it seems that if it has formatted OS X Extended then it is logged.

• How to set up the SRI 4000-4331 to enable logging of rsyslog facilitated by using the console admin GigabitEthernet0 port

  Does not work?  Pleas advise

  Run the following on the SRI 4331.

  ntmhomes #configurer t
  Enter configuration commands, one per line. End with CNTL/Z.
  ntmhomes (config) #service timestamps log datetime localtime
  ntmhomes (config) #.
  ntmhomes (config) #.
  ntmhomes (config) #logging host 192.168.20.5
  #logging ntmhomes (config) trap inform
  ntmhomes (config) #logging trap information
  FAC #logging ntmhomes (config)
  ntmhomes (config) #logging facility local7
  ntmhomes (config) #end
  ntmhomes #.

  ntmhomes (config) #logging facility local7
  ntmhomes (config) #end

  ntmhomes #show logging
  Syslog logging: activated (0 messages fell, 11 messages limited rate, 0 flashes of heat, 0 overruns, xml disabled, filtering of persons with reduced mobility)

  No discriminator Message Active.

  No discriminator inactive Message.

  Recording console: level of debugging, 50 messages, xml, disabled,.
  filtering of persons with reduced mobility
  Monitor logging: debug, 0 messages level, xml, disabled,.
  filtering of persons with reduced mobility
  Logging buffer: level of debugging, 64 recorded messages, xml, disabled,
  filtering of persons with reduced mobility
  Exception logging: size (4096 bytes)
  County and logging messages timestamp: disabled
  Persistent logging: disabled

  No active filter module.

  Logging trap: information level, 66 lines of journaled message
  Connection to 192.168.20.5 (514, auditing disabled, udp port
  (link to top),
  5 lines of message logged,
  0 message rate lines limited.
  0 message lines a dropped-by-MD,.
  Sequence number of XML disabled, disabled
  filtering of persons with reduced mobility
  Interface-logging Source: VRF name:

  Log buffer (4096 bytes):
  g to host 192.168.20.5 port 0 CLI request Triggered
  * 9 January 17:45:27: % SYS-5-CONFIG_I: configured from the system memory
  * 9 January 17:45:27: % IOSXE_OIR-6-REMSPA: SPA removed from subslot 0/0, disabled interfaces
  * 9 January 17:45:27: % IOSXE_OIR-6-REMSPA: SPA removed from subslot 0/1, interfaces disabled
  * 9 January 17:45:27: % SPA_OIR-6-OFFLINECARD: SPA (ISR4331-3x1GE) offline in subslot 0/0
  -More-

  I think you need to tell the system that you are using the management interface

  Try

  host 192.168.20.5 record vrf Mgmt-intf

  See the link below the section on management tasks common gigabit ethernet

  http://www.Cisco.com/c/en/us/TD/docs/routers/access/4400/software/config...

• Enable logging for application Oracle MAF

  Hello

  Currently, development of a MAF application and tests on Android Simulator. Of course, I would need to view the logs so that whenever an exception occurs, I would know what who and where is the error occurring. at the level of my own application, for example, if an error occurs in a bean class.

  Can someone point me in the right direction? very much appreciated.

  Kind regards

  Oracle Jdeveloper 12.1.3.0.0

  Framework of mobile app 2.0.1.1.41.141107.1200

  Oracle ADF Mobile 12.1.3.0.41.140521.1008

  Android SDK 4.2.2

  See if this helps:

  https://docs.Oracle.com/middleware/mobile201/mobile/develop/MAF-debug-test.htm

  https://blogs.Oracle.com/Shay/entry/adf_mobile_logging_on_android

• Enable logging of icfcommon for ICF connector?

  I have a custom connector icf file and some of the newspapers are not displayed. In my code, I used the recorders of AGENDA and these work well, but the exit of lumberjacks icfcommon box will not work.

  Someone has used the same custom connector and managed to get the logs of icfcommon to work. When I checked the environment, I didn't see any right-handed newspaper icfcommon defined in the logging.xml.

  Here are a few logs of icfcommon I see in the oim_server1.out for this environment:

  Thread ID: 108	Time: 11-07-2013 14:53:17.057	Class: oracle.iam.connectors.icfcommon.service.oim9.OIM9Configuration	Method: getLookupMap	Level: OK	Message: Enter: Lookup.DatabaseTable.UM.ReconAttrMap
  Thread ID: 108	Time: 11-07-2013 14:53:17.066	Class: oracle.iam.connectors.icfcommon.service.oim9.OIM9Configuration	Method: getLookupMap	Level: OK	Message: return
  Thread ID: 108	Time: 11-07-2013 14:53:17.095	Class: oracle.iam.connectors.icfcommon.recon.SearchReconTask	Method: manage	Level: INFO	Message: Object with UID [534] ignored, does not change
  Thread ID: 108	Time: 11-07-2013 14:53:17.096	Class: oracle.iam.connectors.icfcommon.recon.SearchReconTask	Method: manage	Level: OK	Message: Handling of object with the UID [535]

  Is there any configuration that I need to do in order for me to see that the icfcommon connect my environment?

  I had a similar problem. In a clean environment of IOM with no patches, I received newspapers. After patched IOM to 3 Patch Bundle, the newspaper does not appear.

  It probably a bug.

• How to find the diagnostic logging is enabled?

  Hello
  When I open a page of provider, I get a warning ' low level diagnostic logging is enabled. This may temporarily reduce performance "." Recently, I did the following
  
  Enable logging DNF using responsibility of the system administrator by setting the
  
  following profiles to the USER level.
  
  DNF: Active Log Debug = Yes
  DNF: Debug Log level statement =
  DNF: Debug Log Module = %
  
  I'm not sure of the previous value of the profile system. Is there a way to know which profile parameters have been changed?
  
  Thank you
  REDA

  Enable logging DNF using responsibility of the system administrator by setting the

  following profiles to the USER level.

  DNF: Active Log Debug = Yes
  DNF: Debug Log level statement =
  DNF: Debug Log Module = %

  I'm not sure of the previous value of the profile system. Is there a way to know which profile parameters have been changed?

  Default values are:

  DNF: Debug active Log = No.
  DNF: Debug Log level = Exception
  DNF: Debug Log Module = %

  If you want to know when these values were changed, you could get to the application (help > historical Record) or ask FND_PROFILE_OPTIONS_VL.

  Thank you
  Hussein

• Why extra logging must be enabled?

  Hello
  
  Is it mandatory to enable logging minimum supplemetal to capture the DML change happens in the database without which one cannot capture it again and undo the statements?
  
  Thank you

  You wouldn't need to see additional logging who made a change.
  You may need additional registration to see what changes were made.

  Without opening an extra session, if I issue an update statement, i.e.

  UPDATE emp
     SET sal = 10000
   WHERE ename = 'JCAVE'
  

  Oracle made records in the REDO logs that ROWID have been updated the - the conceptual equivalent

  UPDATE emp
     SET sal = 10000
   WHERE rowid = '<>'
  

  It is perfectly useful for the database - all he cares, that is the IDENTIFIER of the line to be changed and fortunately he can redo the update. For a human being using LogMiner, however, it can be problematic if you try to understand what line has been updated based on the key (i.e. EMPNO). If the NUMBER has not changed since the update of the problem, it is probably not difficult for the key on a ROWID. But if the ROWID has changed, you are out of luck unless you want to comb through newspapers in recovery seeking the operation that caused the ROWID of change as well which is probably painful. If you fear that the initiate will go to update a sensitive column and cover their tracks, this attacker could do using LogMiner to identify very difficult (not impossible, but difficult).

  However, if you connect primary keys in the complementary operation, Oracle would generate REDO that was the concept of equivalent

  UPDATE emp
     SET sal = 10000
   WHERE empno = 12345
     AND rowid = '<>'
  

  This makes it much easier for a man to see which primary key was involved.

  Justin

• Boot Camp can not be used - disk is not logged

  Hello

  Was just looking around for a solution to the "disk cannot be partitioned" and led me to stop FireVault and check if my hard drive has had problems.

  I came back to test if these solutions had worked and got this:

  

  I tried to enter disk utility, by clicking on my HDD, and then file > enable logging, but activate logging is grayed out and I can't click on it.

  Any help?

  Thank you

  Dave

  1. in what year/model is your Mac?

  2. what version of Windows you are trying to install?

  3 can you post the output of the following Terminal commands?

  diskutil list

  Cs diskutil list

  4 do you have an external storage connected to the Mac using BCA?

• Recommendations of logging

  Are there recommendations regarding when you choose to open a session at the beginning or end?  I know in some circumstances, the only option is to immediately because of the packet dropped, but what about in other situations?

  For example, I have an access control rule that has balanced security and a defined strategy for IPS connectivity and a custom policy file.  The action is set on allow which should still block bad things, if it goes through.  Is it better to open a session at the beginning or end?

  My default action for this policy has the network discovery.  Is it better to open a session at the beginning or end?

  The only other place that I have enabled logging is in SSL policies and you can only connect at the end.

  The problem is that I came across a problem where CME seems to have very few events (like maybe an hours value), whereas before, I had days worth so I feel that I now have too many records enabled.  The virtual appliance that resembles it culminates at connection of 10 M running events.

  If you want see what happens on the network and keep track, you have logging enabled.

  I suggest to use end-of-connection in there also.

  Political SSL you can have it with end of connection as the political SSL must decide and then open a session that will be better.

  Rate if helps.

  Yogesh

• Firewall logging on 2821 with the firewall option

  Does anyone know how to enable logging for the ser on 2821 router firewall feature. I have activate attractions I can think but don't get all information on connections, xlate etc. We have a monkey 2821 for internet access and vpn with a small network that cannot justify March or other security management software.

  We have a program here that we adapt to the log analysis/sorting files that meets our needs. Simply to get data.

  Thank you

  Here's the setup guide to set the logging of CBAC

  http://www.Cisco.com/univercd/CC/TD/doc/product/software/ios121/121cgcr/secur_c/scprt3/scdcbac.htm#wp1006845

  Let me know.