Enable logging of icfcommon for ICF connector?

Similar Questions

• Connection reset error for UNIX connector

  Hello

  While trying to perform research for unix connector, I get the error in the log below.

  
  

  java.net.SocketException: connection reset

  
  For this error in the oracle documentation, it says to resolve this problem, verify that you set the UseSSL parameter value in the target system and the connector server COMPUTER resources to yes and true, respectively.

  
  

  But we do not have a server connector and in the COMPUTING resource for target system, there is no UseSSL parameter?

  
  

  Please suggest
  

  
  

  [2015-08 - 03T 11: 21:23.349 - 07:00] [oimext_server1] [WARNING] [] [oracle.iam.scheduler.vo] [tid: OIMQuartzScheduler_Worker-4] [username: oiminternal] [ecid: 77744a889dde03de:-6b95b905:14ee65bb481: - 8000-0000000000000003, 1:30684] [APP: IOM #11.1.2.0.0] IAM-1020021 cannot perform the work: UNIX user group search Recon xxxxxx with history Job Id: 132260 []

  org.identityconnectors.framework.common.exceptions.ConnectorException: com.jcraft.jsch.JSchException: Session.connect: java.net.SocketException: connection reset

  at org.identityconnectors.framework.common.exceptions.ConnectorException.wrap(ConnectorException.java:101)

  to org.identityconnectors.genericunix.GenericUnixConnection$ 3.access(GenericUnixConnection.java:340)

  at org.identityconnectors.common.security.GuardedString.access(GuardedString.java:105)

  at org.identityconnectors.genericunix.GenericUnixConnection.createSSHConnection(GenericUnixConnection.java:328)

  at org.identityconnectors.genericunix.GenericUnixConnection.connectResource(GenericUnixConnection.java:87)

  to org.identityconnectors.genericunix.GenericUnixConnection. < init > (GenericUnixConnection.java:74)

  at org.identityconnectors.genericunix.GenericUnixConnector.getConnection(GenericUnixConnector.java:138)

  at org.identityconnectors.genericunix.GenericUnixConnector.checkAlive(GenericUnixConnector.java:118)

  to org.identityconnectors.framework.impl.api.local.ConnectorPoolManager$ ConnectorPoolHandler.testObject (ConnectorPoolManager.java:105)

  to org.identityconnectors.framework.impl.api.local.ConnectorPoolManager$ ConnectorPoolHandler.testObject (ConnectorPoolManager.java:74)

  at org.identityconnectors.framework.impl.api.local.ObjectPool.borrowObject(ObjectPool.java:229)

  at org.identityconnectors.framework.impl.api.local.operations.ConnectorAPIOperationRunnerProxy.invoke(ConnectorAPIOperationRunnerProxy.java:83)

  to com.sun.proxy. $Proxy506.search (unknown Source)

  at sun.reflect.GeneratedMethodAccessor3690.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at org.identityconnectors.framework.impl.api.local.operations.ThreadClassLoaderManagerProxy.invoke(ThreadClassLoaderManagerProxy.java:107)

  to com.sun.proxy. $Proxy506.search (unknown Source)

  at sun.reflect.GeneratedMethodAccessor3690.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  to org.identityconnectors.framework.impl.api.BufferedResultsProxy$ BufferedResultsHandler.run (BufferedResultsProxy.java:162)

  Caused by: com.jcraft.jsch.JSchException: Session.connect: java.net.SocketException: connection reset

  at com.jcraft.jsch.Session.connect(Session.java:525)

  at com.jcraft.jsch.Session.connect(Session.java:161)

  to org.identityconnectors.genericunix.GenericUnixConnection$ 3.access(GenericUnixConnection.java:336)

  ... more than 20

  Thank you

  My guess is EXIT 328 do not get a response from the server because of permissions or cannot perform the work - check your permissions for remote access and file access system--cannot be a code to deliver all this.

  .createSSHConnection(GenericUnixConnection.java:328)

  Exit 328

• How to enable logging in OBIEE 10 G

  I have the LDAP authentication in OBIEE 10 G and users reside only in LDAP.
  I have a requirement to enable logging for some users. Can suggest me what steps are necessary. I created the user in the RPD and activated the record for this user. Kept the same ID user in LDAP. I still don't see the newspapers.

  Given that you want to enable loglevel to few users, you have to go something similar to the below

  You block Init suppose to be like
  in case: the user to 'a ', ' b', then 2 ELSE 0 END
  the LOGLEVEL variable value

  Score pls correct/good

• xw9400: xw9400. Pinout of the need for the connectors of the case (no psu connectors, only those in the case)

  I need the list of pins for various connectors case-Strip pin, especially J24 but other multispindle those too.

  Manual of Tyan S2915 Board for is a different version than that of poor quality that they OEM would be at HP for the 9400 and HP Tech Ref for the 9400 only provides pinouts for connectors well defined including pinout lie anywhere.

  The connector of the Panel before xw9400 J34 (there is no J24) pinout, the mother, is map:

  

  There are 2 key positions (lack of spindle) on pins 10 and 15.  Use these empty pins to help identify the signals.

  The pinout is very similar to other former workstations HP.  A few tips:

  -Pins 1 and 3 are for the harddrive activity led.

  -Terminals 2 and 4 are for the power light.  HP systems have back to back LED connected between these pins.  A green is on and functioning normal and red lights (and flashes error codes) when there are errors.

  -Connect a momentary between pins 5 and 6 switch will turn on the computer and off.

  -Connection of a momemtary between pins 7 and 8 switch will force a system reset.

  -PIN 9 is designated as + 5V, but it is powered by a 100 ohm pullup resistor to + 5V, so it will not provide a lot of power.  FOR INFO.

  -SPKR + and SPKR - are for the internal speaker.

  Most of the other connectors xw9400 follow standards of industry, i.e. the IDE drive and floppy connectors.

  Is there anything else you want to know?

• Unable to enable logging

  Hello world

  I guess to partition my new WD external, but I couldn't do that thanks to disk utility asking "Enable logging" on the menu file, I can't do that because it is gray as image. Please help me, how can I partition my WD.

  Thank you very much

  If you look at the dialog box in your image, you will see that you have already selected the logging. Look at him "Format:" falling... He said 'OS X Extended (journaled).

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

• your user profile was not loaded correctly! you have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please, check your log of events for more information or contact your administrator

  Desperately need help.  I'm supposed to use my computer to type a HUGE Affidavit today and its buggered! Oh no.! Get started with my kids have been playing on my computer and install different games.  So I thought that I do the big thing non-technical MOM and start cleaning up the programs!  Well I accidently deleted NIVIDA and probably something else (I think) and totally messed up my computer!  I have re-uploaded NIVIDA and now my computer "looks like" back to normal, but it throws this error message
  
  "your user profile was not loaded correctly! you have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please, check your log of events for more information or contact your administrator"

  and now I can't save anything or find my pictures that I'm desperate for! Can someone please give me a helping hand.  Not technically minded, to take me on as a challenge!  Thanks bunch :) Sarah

  Desperately need help.  I'm supposed to use my computer to type a HUGE Affidavit today and its buggered! Oh no.! Get started with my kids have been playing on my computer and install different games.  So I thought that I do the big thing non-technical MOM and start cleaning up the programs!  Well I accidently deleted NIVIDA and probably something else (I think) and totally messed up my computer!  I have re-uploaded NIVIDA and now my computer "looks like" back to normal, but it throws this error message
  
  "your user profile was not loaded correctly! you have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please, check your log of events for more information or contact your administrator"

  and now I can't save anything or find my pictures that I'm desperate for! Can someone please give me a helping hand.  Not technically minded, to take me on as a challenge!  Thanks bunch :) Sarah

  Here is the tutorial to solve this problem. It is very involving. Please read the step by step.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  t-4-2

• ACL logging on router for syslog

  ACL logging on router for syslog

  I need to monitor ports on the router to a particular host to a destination. I have an ACL as shown below

  permit log host 192.168.0.10 ip host 10.0.0.1

  allow an ip

  I have server syslog configuration, I see on the syslog server log messages, but there is no port information.

  Log message looks like

  "% S-6-acl IPACCESSLOGP:list permits 10.0.0.1 (0)-> 192.168.0.10 (0), xx packages.

  I need to know which ports are host 10.0.0.1 uses the server 192.168.0.10

  What is the best way to get this information.

  Thank you

  Dominic provides a creative solution. And according to the requirements of the original post, it could be a very satisfactory solution.

  But we can also provide an explanation of the problem and a solution for this. A very simple access list that allows traffic between a specific pair of guests receive the original message and then allow all ip traffic. The access list does not cover all the values for the Protocol ports. And it is the reason for the log messages do not have port information. If the access list does not review the port numbers the message cannot report port numbers. If you want the log message to include port numbers, then you must consider the port numbers in the access list. This version of the list is slightly more complex, but it will provide the port numbers you want:

  permit udp host 10.0.0.1 host 192.168.0.10 between 0 65535 Journal

  permit tcp host 10.0.0.1 host 192.168.0.10 between 0 65535 Journal

  permit log host 192.168.0.10 ip host 10.0.0.1

  allow an ip

  HTH

  Rick

• Installation through dbca.rsp - unable to enable logging of archive during installation

  I am trying to perform an automated installation of Oracle 12 c DB.

  In the same dbca.rsp file that is provided with the installer of Oracle 12 c I don't see a place where I can specify to enable logging on the installed database and the location of archive logs archives.

  In addition, below parameter when specified makes no different to the installer and it takes just the default location every time.

  #-----------------------------------------------------------------------------

  # Name: RECOVERYAREADESTINATION

  # Data type: String

  # Description: Location of the data file

  # Valid values: location of the recovery area

  # Default: $ORACLE_BASE/flash_recovery_area

  # Mandatory: No.

  #-----------------------------------------------------------------------------

  RECOVERYAREADESTINATION = "Z:\oradata\flash_recovery_area\".

  Am I missing something? Thank you

  Very well your log file shows

  1. [main] [20:19:46.788 IST OF 2014-05-09] Lsnr headset [NetworkUtils.getOneLocalListenerProtocolAddress:3111]
  2. [main] [20:19:46.788 IST OF 2014-05-09] [HAUtils.getCurrentOracleHome:493]  Home of the Oracle system property: C:\app\oracle\product\12.1.0\dbhome_1
  3. [main] [20:19:46.788 IST OF 2014-05-09] [CmdToolUtil. [ : 250] m_winDllLoc = C:\app\oracle\product\12.1.0\dbhome_1\bin
  4. [main] [20:19:46.788 IST OF 2014-05-09] [GETCRSHOMEUtil. [ : 93]  ToolName: getcrshome.exe - tool rental: C:\app\oracle\product\12.1.0\dbhome_1\binTool dependencies: [Ljava.lang.String;@4a53fb57 ]
  5. [Thread-18] [20:19:46.804 IST OF 2014-05-09] [StreamReader.run:61]  In StreamReader.run
  6. [Thread-17] [20:19:46.804 IST OF 2014-05-09] [StreamReader.run:61]  In StreamReader.run
  7. [main] [20:19:46.819 IST OF 2014-05-09] [CmdToolUtil.doexecuteLocally:884] retval = 1
  8. [main] [20:19:46.835 IST OF 2014-05-09] [CmdToolUtil.doexecuteLocally:885] exitval = 1
  9. [main] [20:19:46.835 IST OF 2014-05-09] [CmdToolUtil.doexecuteLocally:886] rtErrLength = 0
  10. [main] [20:19:46.866 IST OF 2014-05-09] [CmdToolUtil.doexecuteLocally:892]  Unable to run the command. Command = env [C:\app\oracle\product\12.1.0\dbhome_1\bin\getcrshome.exe] = error = null]
  11. [main] [20:19:46.866 IST OF 2014-05-09] [HAUtils.getHASHome:1398]  Could not get at home.
  12. PRCT-1011: cannot run 'getcrshome.exe '. [Error:]
  13. [main] [20:19:46.866 IST OF 2014-05-09] BestSoFar = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)) [NetworkUtils.getOneLocalListenerProtocolAddress:3263]
  14. [main] [20:19:46.866 IST OF 2014-05-09] Host [NetworkUtils.getOneLocalListenerProtocolAddress:3276] = null hostParam = 10.94.153.35
  15. [main] [20:19:46.866 IST OF 2014-05-09] [NetworkUtils.getOneLocalListenerProtocolAddress:3342] bestAddrSoFar = (ADDRESS = (PROTOCOL = TCP) (HOST = 10.94.153.35)(PORT=1521)) return
  16. [main] [20:19:46.866 IST OF 2014-05-09] [NetworkUtils.getOneLocalListenerProtocolAddress:3402]  Return bestSoFar = (ADDRESS = (PROTOCOL = TCP)(HOST=10.94.153.35) (PORT = 1521))
  17. [main] [20:19:46.866 IST OF 2014-05-09] [NetworkUtils.getOneLocalListenerProtocolAddress:3402]  Return bestSoFar = (ADDRESS = (PROTOCOL = TCP)(HOST=10.94.153.35) (PORT = 1521))
  18. [main] [20:19:46.866 IST OF 2014-05-09] [NetworkUtils.isDefaultHostName:2793] lsnrHost: 10.94.153.35 ==> ip address: 10.94.153.35 host: oracle12c ==> ip address: 10.94.153.35
  19. [main] [20:19:46.866 IST OF 2014-05-09] Listener [NetworkUtils.getLocalListenerAddresses:1317] [0] = address of the listener = null
  20. [main] [20:19:46.866 IST OF 2014-05-09] [StepContext.setListenersToUpdate:928] needLocalListener = false

  Your listener is not configured correctly, your server is missing a valid host name or your listener is missing entries of the database...

  Well, I think you leave this parameter empty, like the YES program automatically detect the listener installed on the host computer and to configure!

• Is there a cable that has a configuration of PIN for the printer and a USB for PC connector?

  I recently bought a HP Pavilion p6620f desktop PC to replace my HP Media Center PC m1270n desktop computer, which has stopped working.  I have a HP OfficeJet K60xi all in one printer fax scanner copier that has been the cable connected to the old PC.  The end of the cable does not match any of the places to go on the new PC.  Can you please tell me how to connect the printer to the new PC?   Is there a cable that has a configuration of PIN for the printer and a USB for PC connector?

  Please see: installation of the product with the USB cable and using the driver from Windows Update or the driver located in the Windows 7 operating system and HP USB 2.0 cable to the printer.

• Is there a way to enable auto sign-in for Lightroom Mobile?

  Is there a way to enable auto sign-in for Lightroom Mobile?  Now I have to sign in every time I start Lightroom.

  Your problem should be fixed with the next update. Stay tuned. -Guido

• For each connector where I can use BMC Remedy?

  Friends,
  Could you help me to find the differences between BMC Remedy Connector
  -BMC Remedy Ticket Management
  -BMC Remedy user management
  
  For each connector where I can use it?
  
  
  Thank you

  An easy!

  Management of Ticket BMC Remedy: I hope you are aware that means product BMC of ticketing. In simple terms, it is a query interface which allows yo to create tickets (requests) for anything. If your traditional application interface is BMC ticketing for all target systems and you want to continue to keep the query pattern as even for targets that can be connected to IOM for the direct supply and this connector allows you to create a similar ticket BMC using the interface of the IOM. Examples could be physical access phone card IDENTITY etc.

  BMC Remedy User Management: now I said BMS is a request se management fees, so there all workflows created in itself. So when you have the workflow, we'll also users to fall in some parts of the workflow approval and action. These users are managed via this connector.

  Thank you
  SRS

• Unexpected Setup error see log Console errors for more details. -203

  Firefox could not install the file at

  http://platformdl.Adobe.com/Nos/getPlusPlus/1.6/GP.xpi

  because: unexpected Setup error
  See log error Console for more details.
  -203

  whenever I try to install flash 10 for firefox, it says that once it finishes downloading. I tried to uninstall flash and reboot... Help

  Console error said expected declaration but found ' *'. Go to the next statement.

  Hi, I wish that he y a sticky ' without an operating system versions of browser (s) and the information we cannot help you.

  I can't give you advice without this info.

  Thank you

  eidnolb

• Creation of several objects in resource for OOTB connectors

  All,
  
  I am trying to create a second object of resource AD user for the STANDARD connector. I'd like to think that the connector AD (and all connectors, for that matter) has been designed to manage the creation of several objects in resource for the same Types of resources, but I'm bad? It does not appear the IOM connector can handle this easily.
  
  Does anyone has created several objects of resource for a connector? It is a relatively simple task, or it will require a big effort? Is it still possible? Pointers?
  
  Thank you!

  I'll give you a little help with replication. I found the best way to do is to import the original connector. Cross the diff鲥ntes pieces that each have a unique name, which is not part of one of the other names of piece. You must have unique names for the following:

  1 object resource
  2. process definition - commissioning
  3 resource
  4. form - process
  5 scheduled task

  After you import the connector, all of the following for renaming into something unique. I would also update your form of process to have a default value of your IT resources, as well as your scheduled task for point values to new unique names. Export the 5 elements, without addictions. The cards will be the same. Use find and replace the values, and then import the new XML. If it works, duplicate the XML file for each of the new workflows that you want to create.

  -Kevin

• Enable logging for application Oracle MAF

  Hello

  Currently, development of a MAF application and tests on Android Simulator. Of course, I would need to view the logs so that whenever an exception occurs, I would know what who and where is the error occurring. at the level of my own application, for example, if an error occurs in a bean class.

  Can someone point me in the right direction? very much appreciated.

  Kind regards

  Oracle Jdeveloper 12.1.3.0.0

  Framework of mobile app 2.0.1.1.41.141107.1200

  Oracle ADF Mobile 12.1.3.0.41.140521.1008

  Android SDK 4.2.2

  See if this helps:

  https://docs.Oracle.com/middleware/mobile201/mobile/develop/MAF-debug-test.htm

  https://blogs.Oracle.com/Shay/entry/adf_mobile_logging_on_android