Grant access to the URI at the time of installation or execution

Similar Questions

• Grant access to the operations of vCenter

  vCOps 5.8.2

  vCenter (untied) 5.5

  After registering via the UI interface vCOps for vCenter Operations Manager role privileges are not listed.

  Update or remove and save the vCenter has not changed this condition.

  

  Someone has an idea? Thank you

  This could me silly, but you please check is all its local group on the server that is used to grant access to users...

  Since builtin roles are not used their might be a chance to use local groups. You can cross check it in tab Permissons.

• Grant access to the Satellite A100-906 after BIOS crash

  I lost access to my laptop.
  1. I turn on laptop with an attached USB flash drive.
  2 error appeared when the bios loading (TRX error or something like that).
  3. I restart the laptop
  4. I get error BIOS checksum with suggesstion press f2 for bios Setup or f12 for load default settings
  5. I try to press f2 and get dialogue with password request.
  6. I restart the laptop again.
  Now computer laptop view to load OS and bios access password request.
  How can I solve my problem?

  PS. I'm not configure pasword for laptop before. Pwd and pwd startup BIOS was empty.

  Hey man, I don't know what the problem is here, but BIOS password can be removed by only authorized service. He wants the costs you a little, but it can be removed without any problem. On the OS, I'm afraid, you have to install it again.

  BTW: some USB flash drives are password. If you want to have access to the recorded data you must enter the password first. Your key USB also has password protection?

• What is Akamai NetSession customer (users\**\appdata\local\akamai\netsession_win.exe and it's OK to grant access to the network?)

  My mobile provider sent a notice to update my BIOS software, I did.  During automatic reboot, I got a security alert Windows, informing them that Windows Firewall has blocked some features of Akamai NetSession Client on public and provate networks... Allow client to communicate over public and private networks Akamai NetSessin?

  Akamai don't come right out and say, but the reason that netsession is installed on your computer is to allow them to use your computer to 'upstream' content to other users.  By installing NetSession, you allow Akamai use your idle bandwidth to transfer files to other users of Akamai.

  Some of the statements of Detangling: http://www.akamai.com/html/solutions/client_design_principles.html

  "The information that Akamai capture are similar to a web server, and that the information is only used for troubleshooting and monitoring of network performance."  This means that NetSession sends continuously information on your computer to Akamai.

  They say that NetSession will use your computer when it is "inactive or use minimum network resources.".  This means that NetSession is constantly monitor your use of the network and transmit this information to Akamai.  And as bandwidth varies from second to second, this info should be sent upwards to Akamai a lot.  Wait a minute, didn't they say just they captured only the kind of info that capture web servers?  Web servers capture information about the use of bandwidth.  What other information Akamai capture?  I couldn't find details on their site.

  So if you install NetSession, you be to join a peer-to-peer network and allowing Akamai send files from your computer at the time as Akamai may use you your minimum bandwidth.

  I also have a problem of security on the files I get the NetSession.  It seems that it is not difficult to download a file using NetSession, change it to carry a load of viruses and then leave the computer idle and wait NetSession transmit the file infected others NetSession.  I hope that Akamai has taken measures to address this problem, but I can't find any information on it.

• How to find the Date and the time of Installation of Oracle on Windows?

  Hello
  
  Is it possible to find the installation Date and time of Oracle on Windows?
  
  
  Concerning
  Rajesh

  If you have never recreated/restored/reincarnated the database, then COLUMN of v database $ should tell you when you created the database.

  If you are looking for the time of installing Oracle home, check the logs under OraInventory.

  Reply by Satish sir at the following link:
  installation of a database date/time!

  HTH
  Girish Sharma

• May not be granted access to the photos on iPhone 5 s

  I have an iPhone with iOS 9.3.5 5s. I'm trying to use an external drive to iXpand of SanDisk to save pictures from the phone. I use the player of iXpand application.

  When I insert the drive and open the app, the app said: "unable to access photo library. Please enable access to your photo library in the application settings. »

  When I opened the settings, Photos is not an option in the parameter of the iXpand player (microphone, camera, and Notifications are listed). When I go to privacy and select Photos (where the Apps that have requested access photos are supposed to be) is listed.

  No idea how I can access this app for my photos?

  Thank you!

  It should be in the privacy settings for photos. You may have accidentally denied permission to access photos when you have installed the app first. If you do not see the player application of iXpand in the privacy settings for photos, try uninstalling the app and reinstall it costs. He should ask to access your photos during the configuration of the application. Grant him permission to access your photos.

• Network - network to access all the time drive mapping

  Hello

  I have a new drive to set up the operation to work. To access the files from my laptop, I have the "mapped network drive' and can now access online files at work and on the drive home offline and synchronize later at his next in the range of the reader. My business partner also has his laptop set up in the same way.

  However, this can cause problems. Take a situation where person only range of the network for say a week and has updated the files - they cannot synchronize files and so the other user of the network cannot see the files updated - Yes you can email but it is not an ideal situation

  Is there a solution to this problem? Can you implement Windows one way to access these files on my computer/Windows Explorer (in accordance with the mapped network drive) where the files can be constantly synchronized and connected to the network, no matter where you are?

  Thanks in advance for your answers!

  The only method that does not require a lot of time and money is to access the network remotely using a software like team Viewer.  If you install TV (free) on the computers that you will be able to have access to, modify, etc. files that you have an internet connection.

  For those of us who are on the road a bit, it's the gold standard.  Its free to use personal, easy to use and the bulletproof.

  You can work on files locally and then transfer them or actually working on the files on the other computer remotely.

• grant access to the schema

  Some may give me a script to do the following:
  
  I have a scheme name ABC and I want to give a user XYZ a read access to all objects in the schema of the CBA. IE (TABLES, VIEWS. SWQUENCES etc.)

  Just to emphasize a point that maybe isn't obvious, there are two general approaches that have been discussed - dynamic generation of scripts and SQL scripts.

  Build scripts of scripting occurs when you have one (or several) SQL statements that generate many SQL instructions you have here. It must be a two step process in this case. You spool the SQL statements that you build in a file (a SQL script), and then run the SQL script, that you just created. Simply to generate the script has no effect on the database. The SQL statement that you posted would be part of a script generating approach of scripts, then you must do something like

  SQL> spool my_script_file.sql
  SQL> <>
  SQL> spool off;
  SQL> @my_script_file.sql
  

  The other approach is to use dynamic SQL statements. This is the approach of using EXECUTE IMMEDIATE in a PL/SQL block, i.e.

  BEGIN
    FOR x IN (
        SELECT *
          FROM dba_objects
         WHERE object_type IN ('TABLE', 'VIEW', 'SEQUENCE' )
           AND owner IN ('XYZ', 'PQR' )
    )
    LOOP
      EXECUTE IMMEDIATE 'grant select on ' || x.owner || '.' || x.object_name || ' to ABC';
    END LOOP;
  END;
  

  Dynamic SQL will actually affect the database - you build and run the SQL statements in a single step. This eliminates the need of the coil of the output of the SQL statement in a file, and then run this script.

  Justin

• Browser is no longer will allow me to access the sites that access all the time

  I'm trying to access different websites that I've found only 12 hours ago, and I told myself I can not because of two issues of content - such as the proposed site porn my browser, either because the IP address is unclassifiable.
  I checked to see if I had a bad Windows Update to explain this, and although there was an update to security 12 hours ago, it was listed as successful.
  How can I access my sites again?

  I discovered that the filter also affected my Kindle. I have contacted the ISP and discovered that they had made a mistake on their end. The problem is now resolved.
  Thanks for your response.

• Enable WebVPN without granting access to the ASA/AMPS/CLI

  Is there a way to allow access to users WebVPN (SSL) through the ASA (8.2.1) without allowing them to connect via ASDM, SSH, Telnet or CLI? I want to warn my VPN users to access the configuration of the firewall.

  I see in ASDM there are certain formulations on "it's effective only if AAA authenticates command console is configured" but I do not understand what it is explained.

  Thanks in advance,

  Greg

  You can restrict local users with the following:

  name of user attributes

  type of remote access service

  You need aaa authenticate console orders because when its not defined you can come as the default username (pix) or no username at all and the password enable (in the case of Deputy Ministers DEPUTIES). If there is no sent username, so we cannot verify obviously not the option of type 'service' in the attributes of user name. Here is more information on the command "aaa authenticate console":

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/command/reference/A1.html#wp1535834

  -heather

• Use the ADF security to grant access to the application

  Hello

  One of our customers has to move their forms ADF application. The customer also wants to implement SSO using Kerberos. I could implement the ADF to the application security.

  The Application has two types of users whose information is stored in the USERS table in the database-

  1. Users of the application (not a domain user)
  2. Active Directory/domain users.

  What the clients want to do, is that if the user belongs to the domain, while the user must be able to view the home page directly. If the user is not a domain user, then the login page must be displayed and the user must be authenticated before the redirection to the home page.

  The first part, i.e. to implement SSO for users in domain works. But I don't know exactly how to proceed with the Application users.

  Can I create a custom authenticator that connects to the database and authenticate users of the Application?

  Any suggestion and pointers will be helpful.

  Thanks and greetings

  Tinto

  You probably don't need to create the custom authenticator.

  WLS provides already ReadOnlySQLAuthenticator: Configuration of authentication - 11 g Release 1 (10.3.6) providers

  Define "control indicator" for two suppliers of "SUFFICIENT".

  I guess within the Web.XML you have something like:

  CLIENT-CERT

  ?

  WLS supports several methods of connection in the element for you can use something like:

  CLIENT-CERT, FORM

  Login

  errorPage

  (no doubt simpler is to configure the security of form based in the ADF Security Assistant and then manually add CLIENT-CERT in the web.xml file)

  Dario

• Satellite A100-386: no internet access after the new XP installation

  Hi everyvody!

  I can do it myself, so I ask for your help!

  I have a Toshiba Satellite A100-386 with windows XP MCE.

  I recently had a virus, so I formatted my drive. I don't have the installation CD with me, so I install XP.
  I have two disc on my computer with the system and the other with the documents.
  Then I install ALL the drivers I could find on the Toshiba site for my computer.
  This means that the PSAA9E. The problem is that I have no internet! I don't understand why.

  When I look in computer management, I have no ethernet, controller mass storage controller and network controller.
  I have zone alarm as a firewall and an antivirus avast!

  I disabled avast to be sure that he's not in it but no result...
  In Thoshiba drivers there is also something to update the BIOS.
  I did it but I didn't change. I hope the problem here not there...

  It will be really nice to help me ^^

  Hello

  I think that you just have not installed the right driver LAN and WLan driver

  As much as I know this laptop supports Intel Pro 100 Lan and WiFi Intel 3945ABG card card

  Please visit the European driver Toshiba page again and download the compatible network driver and the driver WLan.
  Unpack the packages, then install it.

  Finally check again if the LAN and WLan cards were recognized in the Device Manager in network adapters.

  Good bye

• need serial number for lightroom 4. Bought earlier but at the time of installation

  bought light room 4 a couple of years, but have been waiting to upgrade my computer to install. How can I get the serial number.

  Hi darrens.

  Please see the link below.

  Find the serial number of your Adobe product quickly

  Kind regards

  ~ Mohit

• Oracle 11G - access to the table problem

  Hello
  New on Oracle IAM... After you create a database, I created a connection and SYSDBA role...
  And then I create a table called Table1. And then I create a new USER and I Connect with the same SID of the database, but the role has the DEFAULT value for this new USER...
  
  01. but the problem is that I can't find the Table1 table for this new user... so how acess as Table1...?
  
  02. I came to know in Oracle, also we can design forms for the frontend and can generate EXE... Is this true?
  
  03. in SQL Server - Sql Port with static IP - we have access to the database for remote users... Is it possible for Oracle?
  
  
  Thanks for the directions...

  997497 wrote:
  Hello
  New on Oracle IAM... After you create a database, I created a connection and SYSDBA role...

  What the user did you use to connect? I'm guessing that you logged in as SYS

  And then I create a table called Table1. And then I create a new USER and I Connect with the same SID of the database, but the role has the DEFAULT value for this new USER...

  So I guess that you have created the table in the SYS schema. You should never, ever create user objects in the SYS schema. If you have created the table in the SYS schema, you really need to drop and create in a more appropriate scheme.

  You indicate that you come from SQL Server, so there may be a question of terminology. Which refers to SQL Server as a "database" is roughly equivalent to what Oracle designates as a "scheme." An Oracle database contains many schemas. A schema is the set of objects owned by a particular user.

  01. but the problem is that I can't find the Table1 table for this new user... so how acess as Table1...?

  As I said above, you really, really should not create objects in the SYS schema. If you really want, however, you need to log the SYS schema and grant access on the table to your new user

  GRANT SELECT ON sys.table1 TO your_new_user
  

  You will then need to fully qualify the table name in your SELECT (or create a synonym or the current_schema)

  SELECT *
    FROM sys.table1
  

  02. I came to know in Oracle, also we can design forms for the frontend and can generate EXE... Is this true?

  Older versions of Oracle Forms would create server executables. The modern versions are used to create three-tier applications. You can also use APEX to build web applications. Of course, you can also generate executables by writing code in another language (often .net).

  03. in SQL Server - Sql Port with static IP - we have access to the database for remote users... Is it possible for Oracle?

  Is this possible? Sure. Depending on what means "remote users", however, it may be poorly advised - you would never open a database to the internet directly, for example, you want to ensure that the remote users are connected to your network (via a virtual private network).

  Justin

• OBIEE 11 g - access to the catalogue section

  Hi all
  
  How to grant access to the section catalogue of OBIEE 11g?
  
  http://s15.PostImage.org/c6bzrbvy3/print_screen_040313.PNG

  Hello

  If you want to provide, or to revoke the access to the catalogue section, you can do this in Administration-> manage privileges:

  Home and the header-> Access section catalog UI prévilige

  Thank you
  Hyder