enabling cookies attempt and nothing works
I tried to go to the Privacy tab in internet options and change my settings but nothing works
http://Windows.Microsoft.com/en-us/Windows-Vista/block-or-allow-cookies
Block or allow cookies
This information applies to Windows Internet Explorer 7 and Windows Internet Explorer 8.
Internet Explorer offers different ways to control the cookies that are stored on your computer. You can block or allow cookies or you can choose the specific sites that you'll accept cookies. When you make these kinds of changes, the cookies already stored on your computer will not be affected. For this reason, you can delete cookies already stored on your computer before following the steps below. See Cookies: frequently asked questions for more information.
http://Windows.Microsoft.com/en-us/Windows-Vista/cookies-frequently-asked-questions
Cookies: Frequently asked questions
This information applies to Windows Internet Explorer 7 and Windows Internet Explorer 8.
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
I recently had a new hard drive installed in my 2008 iMac desktop computer, because right now I can't afford a new computer. I am now under OS X El Capitan 10.11.4 and my password no longer works so that I can reinstall office microsoft for Mac. I'm trying to change my password, but you must enter the old password and it does not recognize the password. I tried every password I use and nothing works. How can I change or get a new password?
Reset the password.
OS X 10.7 Lion, Mountain Lion, Yosemite 10.9 10.8, Yosemite 10.10 and 10.11 El Capitan
Shut down the computer.
Start the computer, and then press on and hold the command key and the R key to boot from the recovery partition.
When you see the Apple logo, release the keys.
Wait until the OS X Utilities window appears.
Move the mouse pointer to the bar menu at the top of the screen, click on "Utilities" and select "Terminal".
in the menu dropdown.
Terminal window is displayed.
TypeRegeditdans resetpassword and press enter on the keyboard.
Reset Password Utility window will open.
Leaving the Terminal.
Select Macintosh HD, if not already.
Select the user account in the menu popup box under "Select user account.
Enter a new password.
Re-enter the new password for the user.
Enter a hint.
Click on the Save"" button.
Click in the menu bar, and then select restart.
Open a session.
When Keychain dialog box appears, select "create new keychain".
-
FireFox has gone completely transparent and nothing works
I was in the middle of surfing when suddenly, Firefox went completely transparent and there is nothing I could do. Only minimize, restore and close works.
I tried to update flash, re-installing of Firefox and nothing works.
http://ImageShack.us/a/img5/8683/75930925.jpg
http://ImageShack.us/a/img18/1740/89238227.jpgHello yAxOr, can you try to start firefox in safe mode by pressing the SHIFT key during startup of this and see if the problem occurs there too? Maybe a theme or hardware acceleration intrudes here...
If safe mode does not work, you can try to disable hardware acceleration in firefox > options > advanced > general and or disable addons that could cause the problem. It would also be interesting what graphics hardware (description of the adapter, driver date and version of the driver) you use - you can access this information in firefox > help > correct information to the bottom of this page... Thank you
-
I tried the suggestion on the error message and nothing works
Hi Honee,
Please, try the following.
You must boot your PC with the XP cd-rom Setup disk, if you have
one.Then, when you get to the screen with the following option appears:
To repair a Windows XP installation using
Recovery Console, press R.Then press [R] to launch the "Recovery Console".
When confronted by a prompt asking for the administrator password - just
Press [ENTER]After his start in RC - type the following command:
Expand x:\i386\hal.dl_ c:\windows\system32\hal.dll
(where [x] is the letter of your cd drive)
* NB If SP3 is installed - then the command that you type must be:
Copy c:\windows\ServicePackFiles\i386\hal.dll c:\windows\system32
... instead, because the files are of two different levels of review
(versions).Then restart.
I hope this helps!
Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
How to change the size of taskbar buttons? I did everything that I've seen proposed in these pages, and nothing works.
The buttons of programs open in the taskbar are tiny and square. I want them to be of normal size (by default). I have locked and unlocked the task bar. I moved the "three vertical lines composed small points." Nothing works.
If you want to enlarge all the icons in the taskbar, and then increase the point size of buttons of legend to a larger number of advanced appearance settings.
Follow these steps:1. click on start, Control Panel, personalization, window color and appearance.
2. on the window color and appearance, click "Classic appearance open for more color options" (link below).
3. in the box "Appearance settings", click on the button "Advanced".
4. in the box "Advanced appearance" under "Item:" dropdown, choose "buttons".
5 set your size
6. click on the OK button.
7 on the "Appearance settings" box, click on the button 'Aplly', wait.
8. click the OK button if you are uncomfortable with the size to change, or just click on the "Advanced" button to set the size.I hope I could help
-
original title: run a legacy cpl high?
Hi all. on my control panel I double clicked on update of programs and I wonder now run a legacy cpl high. When I click ok it says script errors and nothing works. If I click on details until I click on continue it says; "C:\Windows\System32\RunLegacyCPLElevated.exe" Shell32.dll, Control_RunDLL "C:\Windows\system32\ISUSPM.cpl",Program updates I'm not very technical and well I tried to look on the search engines, I can't find anything to help me.
Hope someone can advise me please
Thank you aypee74
I figured how to stop my warning high. I just got an answer and it reminded me that I now know why my computer was giving this prompt. This may help a bit there. So I decided to write.
In my case it was my 'Sigmatel Audio Control Panel.I had disabled "allow reconfiguration pop ups".This will make the warning "Run a legacy CPL high" lights up to chance that your system can access this audio program. Once I've rechecked. The warnings went away unless I open the control panel. But it's a normal warning according to the manufacturer of my computer.Some of you may have something much more serious, but for the few who becomes confused by the latter and have this audio driver, this may help. -
As indicated in the subject line, all of the lights on the front panel are flashing and nothing works. Will not communicate via cable or wireless. Green light is visible on the power supply. Suggestions?
It seems that the printer needs to be reset.
Cut the power to the printer for a minute. Reconnect the power to the printer and turn it on.
Does have an effect?
-
Impossible to update LR CC ~ my one day to change and nothing work updated my Mac and all LR will do is CRASH! Need help. Tried to stop CC and remove the 1.0 file already and who does not work for me. What can I do?
If lr crashes repeatedly, reset preferences. http://www.lightroomforums.NET/showthread.php?14226-resetting-%28or-trashing-%29-the-light file-Preferences-room
-
Without installed chrome and enable cookies Gmail does not work
I just installed firefox but have not installed chrome and have enabled the cookies, but gmail has always said that I need to enable cookies
You can also see article websites say cookies are blocked - pledge .
-
I tried all methods to remove cookies that are available on your support site. I have tried them if the choice in the Options is for authorized cookies and cookies not allowed. Also with 3rd party cookies allowed and not allowed. Normally, I fixed it to authorized cookies but 3rd cookies of third parties not allowed.
I tried CCleaner, cleaner, cleaner Auglogics Euslings, Wise Cleaner, SuperAntiSpyware, Spybot, and WinPatrol and remove temporary files in Windows. All that the software deletes the cookies. I also Spyblaster to protect against hundreds of tracking cookies. It was SuperAntiSpyware who brought the problem to my attention in the first place. It just started doing this a few weeks ago but only the past several days I've worked hard to get these deleted cookies. There must be hundreds of them. I managed to remove about 5 or 6 of them, but others did not move. I want to clean up everything to start over and analyze them on a daily basis. I don't want most of them. SuperAntiSpyware claims it deletes them but when I go to Options in the browser, they are still there. SuperAntiSpyware claims that cookies are there whenever I run the program before you shut down the computer.
I just added that convenience store and looked at the information. I'm sorry but I'm not understand anything. I'm not savvy in computer science.You may have installed an extension that adds the so-called opt-out Firefox cookies.
These opt-out cookies are to be sent instead of the regular cookies and you cannot delete these opt-out cookies unless you disable or uninstall the extension.Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).
- Do NOT click on the reset button on the startup window Mode without failure.
-
I have the navigation bar checked, restore the default toolbar, reset firefox, restarted with Add ons disabled, restarted the computer, restart firefox and update my plugins. Firefox is also updated. Nothing works. Thank you for your help and care.
When you open the toolbar customization panel, the Stop/Reload point at the end of the address bar will be "magically" turn into buttons that can be dragged around. If you put them next to each other, they will be combined into a single button, but if you want them separate, I think you can, but a separation between them.
-
AutoComplete worked this weekend, and now it doesn't. I made no changes to my computer right now. For example, I can't fill the bar below to say "it happened...". "cannot see the drop down menus... just a little flicker. problem is on mozilla and every program I opened w / Mozilla.
Before contacting you I searched the forum, done all the things suggested above and nothing has fixed or even partially improved.I also have IE on my computer and it works fine.
my contact: [email protected]
Do a clean reinstall.
If there are problems with the implementation at day then best is to download the full version and uninstall the currently installed version and remove the Firefox program folder to remove all remaining files.- Download a new copy of Firefox and save the file to the desktop.
- Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
- Uninstall your current version of Firefox.
- Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
- Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.
- It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.
It is perhaps not necessary to create a new profile, so first try if it works with your current profile, and if not then create a new profile.
-
I have really more details to be provided - the question defines the question
Found this in the add comments - one and it worked for me:
"There should be a RoboForm icon on the far right next to the home button & favourites on Firefox (NOT the menu of RoboForm - this is a different icon)." If you click on that you will be asked your online user name and password, and then the toolbar is enabled. »
Hope that helps.
-
Desktop is empty I ran Mcafee security scan it quarentined, and fixed a problem of what was stated, but all the info has been removed from the desktop, pictures, movies, videos and music by virus. Now, I want to have a new image of the desktop, but nothing works... On the other hand, internet works just as it should to exployer
Hi, Carlos.
Restart the system and at the sign of the logo of the manufacturer to start typing F8
Select Mode safe mode with networking
Download the following tool, then select Full Scan to eliminate malware. If your system has been infected, antivirus software has been compromised.
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16
I suggest to turn off System Restore before proceeding with the analysis.
Turn off System Restore in Windows 7 and Windows Vista
http://www.howtogeek.com/HOWTO/Windows-Vista/disable-System-Restore-in-Windows-Vista/
How to turn on and off on system restore in Windows XP
http://support.Microsoft.com/kb/310405
When the analysis is complete, restart and open a command prompt window. Type the following command:
Chkdsk /r
Press enter
You will receive a message about the volume of confinement. Press y and press ENTER to scan on restart. Restart your computer. The analysis will take some time. You will find the crawl log located in Event Viewer > Windows > application log. Search for Winninet when the computer restarts.
-
Lenovo G510
Intel core i5 - 4210M
Windows 7 ultimate
Broadcom 802.11n network adapterFor almost a month I had problems with my laptop because it disconnects randomly the system for some reason, I can't identify.
It can operate correctly for one hour, then disconnects the wireless network card. Every now and then, or every 10 minutes, depends on the day I guess.
I had a lot of reading the forums on this topic and found nothing to work up to now
That's what I tried:
-everything is on maximum performance
decliques-i 'allow the computer to turn off this device to save power ".
-disabled some 'ip helper' in services
-check all that relates to the router (change channels, interference with other routers or wifi), the hardware part SEEMS very well (the laptop is fairly new, it's like a year and never had any problems with it)
-verification of updates of drivers, it says I have the latest version
-fully scanned the laptop for viruses and none has been detected
n ' install any programs lately that could cause this
-network, signall is excellentAnd still nothing worked. NOTHING. I'm really desperate now. The only thing that makes the network working again almost instantly (like5-10 sec then that if I let him restart itself it takes 2 minutes for even 30-40 minutes), turn and turn again on the wireless network card (I have it by pressing the airplane mode)
If no help pleaseeee? I noticed that it happens to many other users also.If the steps we have provided above has not resolved the problem with intermittent wireless connectivity, then what Canadian technology said, it is likely that the problem lies in the material.
Intermittent wireless connectivity are often caused by loose or defective air intakes to the wireless card, or a faulty card as well. This is the reason why Canadian Tech informed on the use of an external USB wireless device.
Another option is to contact the manufacturer of your device, which is Lenovo, for repair options based on security they provide. You can contact them via this link.
Maybe you are looking for
-
My iPhone ring is no longer at any time since the installation up-to-date 9.3.3
No matter what I try, when you place a call, I hear nothing. When someone calls me I never hear it. When I receive a text there is no sound of ding. Has anyone else encountered this problem?
-
Accidentally deleted a photo, I want to keep it, how can I get the picture back?
I was looking through all my new messages and did a lot of deletion. This photo of girls came and I accidentally hit the bar to remove it. Is it possible that I can get her back? I found the picture in the file to be deleted, but can not see some sor
-
I need assistance to access MY I PAD MINI4 BECAUSE I FORGOT 6 DIGIT access CODE
Please can someone HELP me to ACCESS MY I PAD MINI 4, I can't HOLD MY 6 DIGIT access code
-
Scanner/reader of fingerprints using digital validity!
I have a HP Pavilion dv6 dv6-3267 with (64 bit), windows 7 Home premium OA. I can't seem to find a driver disc in my package of computers, so I have downloaded online from hp. The validity fingerprint reader meant for my laptop I downloaded (as in do
-
HP Web site is as slow as Molassas. Is this Normal?
I want to get a driver for a monitor ZR24w, and everything I try to do on the HP site is as slow as mollasses. To load a single page takes about 2-5 minutes. Is this normal? And even after entering/verification of the SN of the monitor, I don't ge