End of XP Support - network -.
So, ask yourself this: the other Vista will be connected to the internet?
In all cases, as long as you have a good antivirus program and a firewall, you should not worry too much leave the machine connected to the internet, XP if you choose to leave.
Tags: Windows
Similar Questions
-
Error: Remote connection software does not support network level authentication.
Original title: REMOTE ACCESS
I have windows 7 ultimate and the remote connection software supports network level authentication.
Isn't he supposed to in this version?
Thank you
It should be, but there are several remote desktop client updates that came out in the last 6 years as of the optional updates on Windows Update, so I would check that you have all the control panel.
-
(Redirected) For Dell Dimension 5150 Windows 10 upgrade: "there are no supported network devices.
Hello world
I have run the applet get Windows 10 and get the message: "there are no supported network devices.
I use the router directly from the ethernet port, so it seems that the Dell 5150 driver for this is not Windows compatible 10, which is disappointing.
Does anyone have a solution to this, or I'll have to just buying another cheap network card?
Thanks in advance,
J McVirgo.
Best of this post in the forum Windows 10 here:
http://en.community.Dell.com/support-forums/software-OS/f/4997
Bev.
-
Setup could not find any supported network devices
Hi all -
I try to install ESX 3.5 on Windows 6.5 for learning virtual machine. During installation it says "Installer could not found no supported network devices.
My Intel Core2 WD system and the NETWORK interface is "Realtek RTL8168 (p) / 8111 PCI Gigabit Ethernet.
Please let me know why I get this error.
Thanks in advance... J
Shiv
Make sure that the virtual network adapter is connected - also if you did not check the white paper on the http://knowledge.xtravirt.com/ title VI3.5 in a box - provides detailed instructions on how to set VI 3.5 under my computer.
If you find this or any other answer useful please consider awarding points marking the answer correct or useful
-
HP pavilion ab205tx: no support network hosted in windows 10
No virtual hotspot software does not work, help me
Name of the interface: Wi - Fi
Driver: Realtek RTL8723BE 802.11 bgn Wi - Fi adapter
Seller: Realtek Semiconductor Corp.
Provider: Realtek Semiconductor Corp.
Date: 21/09/2015
Version: 2023.18.814.2015
INF file: C:\Windows\INF\oem16.inf
Files: total 3
C:\Windows\system32\DRIVERS\rtwlane.sys
C:\Windows\system32\Rtlihvs.dll
C:\Windows\system32\DRIVERS\vwifibus.sys
Type: Wi - Fi Native Driver
Radio types supported: 802.11n 802.11 g, 802. 11 b
FIPS 140-2 mode supported: Yes
802.11W protection of management framework supported: Yes
Hosted network supported: No.
Authentication and cipher supported in infrastructure mode:
Open any
WPA2-Personal CCMP
Open WEP 40 bit
Open WEP 104 bits
WEP open
WPA-Enterprise TKIP
WPA-Personal TKIP
WPA2-Enterprise TKIP
TKIP-WPA2-Personal
CCMP WPA-Enterprise
CCMP WPA-Personal
WPA2-Enterprise CCMP
Defined provider TKIP
Defined provider CCMP
Defined provider defined provider
Defined provider defined provider
WPA2-Enterprise provider defined
WPA2-Enterprise provider defined
Defined provider defined provider
Defined provider defined provider
IHV service present: Yes
HSI YES adapter: [e0 00 4 c], type: [00]
IHV extensibility DLL path: C:\Windows\system32\Rtlihvs.dll
Extensibility HSI UI ClSID: {6c2a8cca-b2a2-4d81-a3b2-4e15f445c312}
Diagnosis HSI CLSID: {00000000-0000-0000-0000-000000000000}
Supported wireless display: Yes (graphics driver: Yes, the pilot Wi - Fi: Yes)If someone asks no. hosted the networking support in windows 10. Please visit this link (http://answers.microsoft.com/en-us/windows/forum/windows_10-networking/cant-create-hotspot-anymore/a81ec382-bd2b-46b0-94d8-9a526483150f?page=1).. .This is very useful link...
-
HP 15-r063tu Notebook PC: no support network hosted after upgrade to windows 10
I recently upgraded my pc to windows 8.1 for windows 10. After that uprading to windows 10 welcomed the network support is disabled but in a windows 8.1 network he hosted support has been activated and it used to work properly. When I run 'netsh wlan show drivers' program of command prompt (admin), then it will display the message below.
Microsoft Windows [Version 10.0.10586]
(c) Microsoft Corporation, 2015. All rights reserved.C:\Windows\System32 > netsh wlan show drivers
Name of the interface: Wi - Fi
Driver: Realtek RTL8723BE 802.11 bgn Wi - Fi adapter
Seller: Realtek Semiconductor Corp.
Provider: Realtek Semiconductor Corp.
Date: 21/07/2015
Version: 2023.15.701.2015
INF file: C:\WINDOWS\INF\oem28.inf
Files: total 1
C:\WINDOWS\system32\DRIVERS\rtwlane.sys
Type: Wi - Fi Native Driver
Radio types supported: 802.11n 802.11 g, 802. 11 b
FIPS 140-2 mode supported: Yes
802.11W protection of management framework supported: Yes
Hosted network supported: No.
Authentication and cipher supported in infrastructure mode:
Open any
WPA2-Personal CCMP
Open WEP 40 bit
Open WEP 104 bits
WEP open
WPA-Enterprise TKIP
WPA-Personal TKIP
WPA2-Enterprise TKIP
TKIP-WPA2-Personal
CCMP WPA-Enterprise
CCMP WPA-Personal
WPA2-Enterprise CCMP
Defined provider TKIP
Defined provider CCMP
Defined provider defined provider
Defined provider defined provider
WPA2-Enterprise provider defined
WPA2-Enterprise provider defined
Defined provider defined provider
Defined provider defined provider
IHV service present: Yes
HSI YES adapter: [e0 00 4 c], type: [00]
IHV extensibility DLL path: C:\WINDOWS\system32\Rtlihvs.dll
Extensibility HSI UI ClSID: {6c2a8cca-b2a2-4d81-a3b2-4e15f445c312}
Diagnosis HSI CLSID: {00000000-0000-0000-0000-000000000000}
Supported wireless display: Yes (graphics driver: Yes, the pilot Wi - Fi: Yes)C:\Windows\System32 > Interface name: Wi - Fi
'Interface' is not recognized as an internal or external command
operable program or batch file.Now I am faced with a major problem with this question. So, please try to solve my problem as soon as possible.
Thanks for the extra detail. I see that you're not the only one who experiences this problem, it looks like something Microsoft would have to help you with.
The best I can suggest is to take a look at some of the suggestions here: hosted Microsoft windows driver network virtual adapter 10.
If the problem persists, you can consider contacting Microsoft.
-
[E5 - 522G] No support network hosted after updating Windows 10
Hello
I recently discovered some problems related to the creation of a hotspot via mobile phone. Things have been works perfectly with Windows 10, but after the update in November/December, I couldn't create a hosted network because apparently my NIC [Qualcomm Atheros QCA9377] suddenly does not support the hosted network. I tried searching for Microsoft Hosted virtual network adapter in the Manager devices, but with showing hidden devices, I'm not.
I also tried to update the NIC drivers, but neither one of the drivers available from the page of the official driver acer help. I tried to restore the system at some point before the Windows critical update, but every time I get an error message indicating that the system restore could not be carried out. The following image shows of the network information drivers.
My question is, can someone tell me is this a Microsoft issue, or is it related to Acer and is the drivers compatible with the new update of Windows 10? Also, I would be very happy if someone could help me solve this problem.
Thank you
Hey. I had this same problem with my G e5 - 573.
I fixed it by installing the version Win8.1 of this Atheros driver instead of the version Win10.
Here is the driver I used: http://global-download.acer.com/GDFiles/Driver/Wireless%20LAN/Wireless%20LAN_Atheros_11.0.0.492_W81x...
It will be useful.
-
Supported network Linksys WUSB6300 and hosted
Hello *.
I just had "nine" Linksys WUSB6300 AC1200 Wireless-USB AC adapter and want to configure it to access point WiFi. However, when I run the below command, I got an error:
C:\WINDOWS\system32>netsh wlan set hostednetwork mode=allow ssid=WiFi-AP key=Pa77w0rd The hosted network mode has been set to allow. The SSID of the hosted network has been successfully changed. The user key passphrase of the hosted network has been successfully changed. C:\WINDOWS\system32>netsh wlan start hostednetwork The hosted network couldn't be started. The group or resource is not in the correct state to perform the requested operation.
Further research led me to:
C:\WINDOWS\system32>netsh wlan show drivers Interface name: WiFi Driver : Linksys WUSB6300 Vendor : Linksys LLC Provider : Linksys LLC Date : 10-12-2015 Version : 1030.3.831.2015 INF file : C:\WINDOWS\INF\oem39.inf Files : 1 total C:\WINDOWS\system32\DRIVERS\rtwlanu.sys Type : Native Wi-Fi Driver Radio types supported : 802.11n 802.11g 802.11b FIPS 140-2 mode supported : Yes 802.11w Management Frame Protection supported : Yes Hosted network supported : No Authentication and cipher supported in infrastructure mode: Open None WPA2-Personal CCMP Open WEP-40bit Open WEP-104bit Open WEP WPA-Enterprise TKIP WPA-Personal TKIP WPA2-Enterprise TKIP WPA2-Personal TKIP WPA-Enterprise CCMP WPA-Personal CCMP WPA2-Enterprise CCMP Vendor defined TKIP Vendor defined CCMP Vendor defined Vendor defined Vendor defined Vendor defined WPA2-Enterprise Vendor defined WPA2-Enterprise Vendor defined Vendor defined Vendor defined Vendor defined Vendor defined IHV service present : Yes IHV adapter OUI : [00 e0 4c], type: [00] IHV extensibility DLL path: C:\WINDOWS\system32\Rtlihvs.dll IHV UI extensibility ClSID: {6c2a8cca-b2a2-4d81-a3b2-4e15f445c312} IHV diagnostics CLSID : {00000000-0000-0000-0000-000000000000} Wireless Display Supported: No (Graphics Driver: No, Wi-Fi Driver: Yes)As you can notice that a
Hosted network supported: No.
How can I activate it?
P.S.: I already followed a tutorial, but without success.
P.P.S.: As I see it in the device (C:\Windows\System32\drivers\rtwlanu.sys) Manager, the chip is Realtek WLAN USB NDIS Driver 40116. Suspects are here: http://www.realtek.com.tw/products/productsView.aspx?Langid=1&PNid=13&PFid=21&Level=4&Conn=3
But we don't know what chip. Therefore, I don't know if there is a newer version of this driver, which can support this future.
Thank you
Seems useful, but I need for my project for windows platform. I prefer cisco or linksys, but for faster result I stept over another provider...
-
Resolve error: series 1200 Protocol not supported network home
1 Laserjet 1200 HP
2. Windows 8 64-bit
3 Error Message: PCL XL error
Subsystem - kernel
Error - Protocol not supported
Operator - 0x0
Position - 0
4. no changes to the network printer
Have already installed a printing device to a laptop connected to a shared printer on the desktop computer. Installed the HP Universal printing PCL 6 (v 5.6.0). Also have a printer all-in-one wireless inkjet that works successfully from the laptop.
He worked successfully for about a month. Then suddenly would not print, but has continued to communicate with the printer via the office. Wireless printing still works fine.
Print path
Laptop to router to desktop for printer 1200
Configuration of the laptop Port
Port: \\DesktopName\hplaserj
Port Description: Local
Printer: HP Universal PCL 6 (v 5.6.0)
To date:
1. have you deleted device printing PCL 6 of the laptop, reinstalled.
2. the footsteps of PCL 6 removed from the register; re-installed the printing device, deleted the old port and created a new port.
3. just did print no, same error message.
4 repeat step 2, but installed the universal HP PCL 6 driver. Same result and same error message.
Can anyone suggest something else to try or point me in the right direction?
Basically, Shlomi has proposed a solution that worked. Thank you.
That's what I actually did.
For Windows 7 and 8, HP has apparently developed universal print (UPD) for the old PCL 6 and PCL 5 drivers. Had already downloaded the 64 bit version of the UPD PCL 6. 64 bit versions re-downloaded and re-installed UPD PC5 and PCL 6. It wasn't the problem.
Then I followed the suggestion to connect directly to the printer 1200 via the USB cable.
1 first removed from the registry, references to PCL 6 and PCL 5 printers
2. then restarted the print spooler (computer-> manage-> services)
3. Add a printer in devices and printers, this time using the DOT4 port.
4 bingo, could print a test page.
5. from print properties, change the local port to \\computer name\hplaserj, the shared printer on the wireless network.
7 bingo again. Has been able to print a test page and were able to print additional documents.
Still don't understand what the problem was or what caused it suddenly appear, but it works now.
-
Errors in Windows 7 with Windows Help and Support, network connection, and the system restore
I have a HP Pavilion dv6 (4 years), sometimes overheated with heavy use. Normally I can cool, restart and wear. However, my laptop just overheated and closes, and this time I encounter all sorts of problems.
First of all, after the reboot, I noticed that the system does not automatically connected to my Wi - Fi (it does not even recognize the available network).
Secondly, in attempting to fix the network problem, I clicked on the link "Troubleshooting", only to receive the following error message "an unexpected error has occurred. ID of Package cannot continue the Troubleshooting Wizard": unknown path: C:\Windows\diagnostics\system\networking error Code: 0x8007045AThird, because troubleshooting did not work, I thought I'd try the help and Support Windows to search for answers. However, when I opened it, I received the following message: "Windows Help and support has encountered a problem. You might be able to solve the problem by restarting Windows Help and Support. If the problem persists, proceed as follows: 1. search the online help on the Windows website. 2. contact your manufacturer of computers or Microsoft Support for assistance. There could be a problem with one or more Windows system files or folders on your computer. "Because I could not connect to the internet, these suggestions and links were useless.
Fourthly, as I failed to locate the problem, I tried a system restore. However, after he appeared to run (took about 30 min) and restarted Windows, the following message appeared: "system restore was not entirely successful. The system files and settings on your computer did not change. Details: System Restore could not access a file. This is probably because an antivirus program is running on the computer. Temporarily disable your antivirus and restart System Restore. An unspecified error occurred during system restore. (0x80070005)
You can try the system restore again and choose a different restore point. If you continue to see this error, you can try an advanced recovery method. For more information, see what is recovery? "I have disable my antivirus (AVG), tried and received the same error message.Short physically all my backup files and restore to factory settings, I think I've exhausted what I can do.
* EDIT * after scouring the site, I found a suggestion to run the tool via the command prompt System File Checker (see thread here: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/no-internet-connection-on-this-computer-after/83fb22c9-712e-467d-9a68-f8d52dde9bcb), which I did and found some corrupted files. The following response appears: "Windows Resource Protection found corrupt files and repaired successfully details can be found in the CBS.log newspaper... File system changes will take effect after the next reboot. "After restarting, the internet connection problem seems to have been resolved. Service work. and Windows Help and Support also works! I hope it helps someone else!
Hi Lorenacadi,
Thanks for sharing of the resolution. Your efforts and patience are highly appreciated.
In addition to the emission of heat:
Two things inside the laptop generate heat - power (in the place where the power cord plugged in) and the processor. The CPU has a heater and a fan to help disperse the heat and keep the CPU at a reasonable temperature. Hot air is sent on the vents, and air at room temperature between in other events.
What happens generally is dust forms near the vents, near the Airways within the laptop computer which lead to the mouths and on the CPU fan itself. All these sources of dust cause airflow slow down, so that the hot air lingers and gets even hotter. To resolve this problem, you will need to take the laptop apart and 'very good' to clean the dust and the CPU fan.Another potential source of heat which would be composed of dust problem might be software related. More 'work' the CPU must do the most energy is needed and therefore more heat is released.
Keep us in case you have questions/suggestions more associated with Windows.
-
Remote assistance - manage the support network?
Windows 7 Ultimate 32 bitI would use the Windows Remote Assistance as a support tool for every computer on our network (about 400). From now on, I came with the addition of a newspaper in the execution of the script:
Password MSRA /saveasfile "x:\%username%".In return, the Logout script deletes the file.That means to me, is to create a Windows Remote Assistance invitation file in a network location, that I can navigate, see what users are connected and it must be the register of the location of the computers (IP/ComputerName). Makes things much easier for me to connect to users and makes it easier for the user. Less user by connecting the best assistance. My goal is to connect to the system without the user having to do anything. From now on, I have to their market through me enter the name of the computer, so I can type in Windows Remote Assistance.My question here is what pops up a window like this:My question is: is it possible to get this to start quietly in the background or minimized in the Notification area?Also: I'm more then happy to have answers with the best means to achieve my goal.Hello
The question you posted would be better suited for the professional community of COMPUTING in the TechNet forums
I would recommend posting your query in the TechNet Forums.
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
I hope that helps!
-
Subscription has ended, but still supported
Review of adobe sent me around in circles with his ridiculous "contact us" pages, this is my last resort. Basically, I signed up for Adobe Creative cloud as a student for a year in 2014 - subscription completed in March, and I had no prompt to register again, apart from an email informing me that my subscription would end me.
My account page says also I am on a free membership, which is strange given that I HAVE in any way, shape or form indicate that I wanted to renew. It also comes with no opportunity to cancel. However, I am always charged on my credit card every month FULL subscription.
I tried several times to get in touch, without result. In fact, the last time I asked a representative told me that I have does not need to take action because the subscription would end automatically, but this obviously was not the case.
Can an Adobe representative CANCEL my so-called free account - and find a way to make your site more useful for those who would like to do the same.
Hi Jenny,
Please contact support by calling/chat for cancellation requests and billing queries:
In case you can't see the contact options, please delete your browser cookies/cache and try again. Also, be sure to sign in to your Adobe account, and then access the link.
Reference: https://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
Kind regards
Sheena
-
Support network for iPhone (sim free) SE bought in the United States, in India
Will the iPhone SE (free sim card model) purchased in the United States, working with Indian cellular networks?
All iPhones unlocked and without carrier purchased in the USA should work all over the world.
However, it is always best to ask your service provider about compatibility with such devices.
-
Hello
I was curious to know what Oracle EBS 11i endsupporting?
Thank you.Hello
Check this file
http://www.Oracle.com/support/library/brochure/lifetime-support-applications.PDF
Concerning
-
What is the end of support date Windows XP SP3
What is the end of support date Windows XP SP3
End of extended support:
April 8, 2014
Maybe you are looking for
-
Unwanted windows that open for "Apple".
When you use Safari, I'm all of a sudden get unsolicited windows that open in telling me that I need 'Apple security', MacKeeper, Krabela.com, 'Official Apple Support', Megabackup and others that I can't seem to figure out how to prevent them from po
-
Slow launch of applications in El Capitan
Since the upgrade to El Capitan on my MacBook Pro (late 2011), iMac (end 2013) and the MacMini (early 2014), I had the problem on all 3 machines. At the launch of many applications for the first time after a reboot (including Mail, Safari, FIrefox, S
-
1007 laser jet prints on full black of the page what are the problem
-
system asks continually updated. but when I update and the system says it successfully completes. It all comes down to sy, I got an update which is the same as that over and over again. How can I stop it?
-
Is there a version of the "Microsoft Malicious Software Removal Tool" for Vista 64 bit?