English installed W2K and the Spanish XP upgrade compatibility issues

Similar Questions

• "Cannot install update and the error occurred ' iOS 9.3.2

  Try to upgrade to 9.3.2 but get "cannot install update and the error has occurred" if I am on WIFI or via iTunes. Someone else?

  Go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete it. Then go to settings > general > Software Update and try again.

• error code 0 x 80246007 appears when you try to install updates and the windows store purchases.

  error code 0 x 80246007 appears when you try to install updates and the windows store purchases.

  any help appreciated

  Original title: error code 0 x 80246007

  Hello

  Please try the patches for Windows Updates:
  http://www.kapilarya.com/fix-error-80070570-Windows-Update-encountered-an-unknown-error-some-updates-were-not-installed
  And for store related issues, use Troubleshooting Windows App tool:
  http://www.kapilarya.com/download-Microsoft-accounts-Windows-apps-troubleshooters-to-fix-casual-issues-for-Windows-8
  Hope this helps, good luck :)

• Question on the recovery CD and the Vista anytime upgrade

  Hello

  I bought a toshiba laptop now a year ago, it came pre-installed with vista home premium.
  I would like to do a complete cleaning my system as its useless been lately and isn't a fact since I bought.

  It came only with - a the product recovery disc and upgrade Express windows.
  But I'm worried because if I do a recovery of product I don't have the real vista disk it SHOULD have and will not have vista on my laptop or one of the files that toshiba put on it.

  What should I do?
  What a product recovery disc actually have on it and do? What is the Windows anytime upgrade disc?

  I have been informed by microsoft and I.T. technicians everywhere that i should have a vista installation disc in the same area so the fact it came pre-installed.

  Help, please

  > It came only with - a the product recovery disc and upgrade Express windows.

  As you say you have the product recovery disc.
  This Toshiba drive contains the image of Toshiba.
  The image is a package and it contains the operating system Windows, Toshiba drivers, tools, utility and software further.

  The use of the recovery CD will fix the laptop back to the factory settings.
  So just boot from the recovery CD and follow the instructions on the screen.

  Just for info:
  The recovery CD will format the whole HARD drive, but I see that a backup is not important to you.

  See you soon

• New password Wi - Fi and the need to upgrade the configuration on HP Photosmart C4780 wireless

  We got a new Verizon FiOS router through an upgrade and now have the new network name and password WEP. I use MAC OS X 10.10 (Yosemite) and does not know how I can change settings of the printer wireless to match the new router information. I tried to uninstall and reinstall the printer on my computer, even re-installed the software, but nowhere he gave me the opportunity to enter into new free wi - fi connection settings. Any ideas?

  And the FiOS router does not support WPS, so I can't use it, unfortunately. Thank you!

  Hi @8eleven5

  There is! If it already has the software installed on your mac, connect the printer using a USB cable and open the HP folder, inside the Applications folder. In the HP folder, find ad open peripheral utility then the HP installation wizard. Run the wizard and choose the option to Setup wireless via USB.

  If she didn't already have the software installed, use the following link to install the software, plug the announcement of cable USB Setup will guide you right to the installation wizard.

  Once the software has set up the printer to the wireless network, simply add the printer to your 10.10

• I recently had a new hard drive installed in my 2008 iMac. I'm trying to re - install office and the computer does not recognize my password. I tried all the passwords I can think of and nothing works and it wont let me continue

  I recently had a new hard drive installed in my 2008 iMac desktop computer, because right now I can't afford a new computer.   I am now under OS X El Capitan 10.11.4 and my password no longer works so that I can reinstall office microsoft for Mac.  I'm trying to change my password, but you must enter the old password and it does not recognize the password.  I tried every password I use and nothing works.  How can I change or get a new password?

  Reset the password.

  OS X 10.7 Lion, Mountain Lion, Yosemite 10.9 10.8, Yosemite 10.10 and 10.11 El Capitan

  Shut down the computer.

  Start the computer, and then press on and hold the command key and the R key to boot from the recovery partition.

  When you see the Apple logo, release the keys.

  Wait until the OS X Utilities window appears.

  Move the mouse pointer to the bar menu at the top of the screen, click on "Utilities" and select "Terminal".

  in the menu dropdown.

  Terminal window is displayed.

  TypeRegeditdans resetpassword and press enter on the keyboard.

  Reset Password Utility window will open.

  Leaving the Terminal.

  Select Macintosh HD, if not already.

  Select the user account in the menu popup box under "Select user account.

  Enter a new password.

  Re-enter the new password for the user.

  Enter a hint.

  Click on the Save"" button.

  Click  in the menu bar, and then select restart.

  Open a session.

  When Keychain dialog box appears, select "create new keychain".

• I just installed FF4 and the default theme seems odd, how to fix?

  Hey, I just installed firefox 4 and the default theme doesn't look like the screenshots I've seen. I have no button firefox (I have a menu instead) and the interface has a dark background. In addition, the new tab buttons and the home page are in a different position.

  How do I change this to the default settings?
  

  Screenshot:

  http://img171.imageshack.us/img171/3190/firefox4h.jpg

  Thank you
  Andy

  The screenshot you provided does not work!

  It seems you're on Windows XP.

  Right-click on the menu bar and uncheck the option menu in the right click menu bar. You will see a Firefox orange Button in the leftmost tabbed moving upward.

  Where you need the menu bar in the future as it is sometimes necessary for some options, you can easily get it by the F10 key. It displays the menu temporarily.

  You can customize it by selecting the Customize option in the right click menu that I said to you, and you can drag and drop any button anywhere.

  The default theme on Windows XP is very dull.
  So, why not try personas. It is large and not memory hogs.
  http://www.getpersonas.com/en-us/

  Personally, I use the. Mind blowing look even better than the available themes navigation.

  Thnx for the use of Firefox.

• Satellite M35X-S111: cannot install W2k and Vista

  Greetings! Today I tried to install windows 2000 on my computer laptop m35x-s111 but my attempts were not successful. After you have copied the original drivers, there was 'Blue screen' talk that it is necessary to disable the Bios shadow and the shadow of the video. These options are not present in the BIOS, it is generally whatever is not present adjustments.

  Today tried to install Windows Vista RC1, but lead to this screen and the message that this is full not ACPI (is not compatible). I understand it, it is necessary to disable all these options and then the system will be installed but how do?

  Hello

  Generally, Windows 2000 installation should not be a problem and it is not necessary to disable anything in the BIOS. The fact is that Satellite M35 is designed for Windows XP and I really don t know if the device is supported for W2000 but on WE download page (http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp) you will find several drivers.

  If possible please send us the error on blue screen code.

• Try to install firefox and the computer says I don't have permission to do so

  With the help of HP Pavillion GC381AV #ABA

  Operating system is Windows Vista

  Error message: "you may not be the necessary permissions to use all the features of the program you are about to run." "You can run this program as a different user or continue to run the program as long as the current user.

  This message appears after that I have to download Mozilla Firefox, once downloaded first step in this process opens preventing step 2 (which is the Mozilla installation wizard) I am logged on as administrator, so I should have the necessary permission, but when I say to use the current user, the box disappears and nothing happens there is no Setup Wizard to run no sign of it on my computer anywhere for me to access.  The only other user account is a guest account so I don't know why he won't give me permission to use all the thoughts?

  Hello and thank you for the HP Forums.  The installation is looking for an administrator account in order to run.  If you are an administrator on the computer, please follow these steps:

  1 when you download Firefox save the download file to your desktop.

  2. when the download is complete and the file is located on your desktop, right-click on the file and choose "Run as Administrator".

  This should install the program without more questions.

  If you are not an administrator on the computer you will need to disconnect and connect to the computer with an administrator account to install this program.

• Matter of installing drivers and the device.

  First of all, I see several posts relating to the installation and device drivers. This case is a little different. My computer don't start successfully, so I tried to install a clean version of Windows Vista. I can't even to my office. So I'm stuck only using the disc installation and boot from CD. I go through everything normally and then the message, "no device drivers were found.

  I have no way to install these see how I can't go to my office. I don't know where to go from here, to rearrange my computer so to speak. I've performed on an emachine computer. I should initially sold out the back of my hardrive but that is not even be found today.

  Any help is greatly appreciated.

  Hi Felix,.

  Thank you for your message.

  eMachines (being original equipment manufacturer - OEM) is responsible for providing drivers for the hardware they provide.

  Drivers Microsoft has included in Vista are for devices that are certified by Microsoft and the hardware vendor to work with the Vista operating system.

  Other hardware may work, but the drivers are provided by the manufacturer. In this case, eMachines.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 10.9.5 security Update 2015-008 installed yesterday and the camera does not work

  Hello

  Updated with security update 2015-008 yesterday on 10.9.5 and iMac 27 (end of 2013 - iMac14, 2 Intel Core i7 3.5 GHz) camera (UVC camera VendorID_1452 ProductID_34065) no longer works in Skype, FaceTime, or photo booth...

  It is most annoying. Thank you for advice or guidance.

  Tarkan

  One of them will solve your problem of camera:

  (1) If your Mac restart does not solve the problem,

  (2) use http://support.apple.com/kb/HT2090 from Apple.

  (BTW - troubleshooting section called an "iSight" camera.  However, after that article was published, Apple has changed the name of the built-in camera on the recent "iSight" Macs "FaceTime", then "FaceTime HD."  Whatever the name of your built-in camera, the same info and troubleshooting applies.)

  Be sure to test several Apple app (photo booth, FaceTime, iMovie, QuickTime Player, etc.) in more than one user account.  Do NOT use the 'Guest' for this test account.  If you don't have more than one user account for testing, create one now.  If you need help, how is explained in http://support.apple.com/en-us/HT201754.

  A 'Standard' user account is all you need for the tests.

  (3) If your camera will work correctly even with Apple applications, use OS X Recovery to completely reinstall your Mac OS since system recovery stored on your startup disk.  Don't bother test Skype or other 3rd party apps until you have your camera works with applications Apple.

  (4) If none of the suggestions above resolve your issue, contact Apple or one of the Apple-Authorized Service Provider to have your Mac professionally repaired. Don't forget to back up your Mac and Deauthorize iTunes before the call for tenders for the service.

  Post edited by: Jim EZ

  Mac OSX 10.11.2

• Windows Vista-used to get the blue screen with the error on it. Re-installed Vista and the programs one by one w/restorations. Now, I get the blank screen minidump file blue w/error after reboot and...

  I find the minidump files and tried opening them and could not. Files and downloaded programs of debugging appear in the program. When I try to open them I get "you must be an administrator to open" insofar as I know that I am the administrator because supposedly everything I need is another administrator account. Also my restore will pass in a few days, and the box is no longer available. Also had an error on my printer files so I removed them, but as I (after) that I pressed the firm PC, the blue screen appeared and had to turn it off manually and of course got the minidump error message when I started again. If at this point, I'm still waiting to see if deleting the files printer helped. Any information would be appreciated.

  OK, I'll look for your next post with minidump files.

• Install cable and the data request USBDriver V7.2 for Sharp GSM GPRS driver software (Compatible with Win95, 98, NT, 2000, XP)

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I'm trying to access the pictures on the old Sharp GX 15 phone internal memory. I bought a data cable and the USBDriver V7.2, but it does not work on Vista. The photos are pictures of baby of my daughter 5 years now, and I really want to print them up. Help!

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  If it's not Compatible Vista and the manufacturer cannot help, cannot do anything about it.

  See you soon. Mick Murphy - Microsoft partner

• CAN the c series modules and drivers XNET and Ethernet expansion chassis cRIO compatibility issues

  Hello

  I encountered a problem with my current setup which was not picked up by the tool advise cRIO or by the engineer of applications OR that we used to check our configuration before starting the project.  It turns out that the NI 9853 CAN modules require a XNET driver that is not compatible with the NI 9149 expansion chassis.

  We currently have a system with a cRIO NI 9068 with general IO and some CAN controller and CAN open modules in a carrycot and an Ethernet NI9149 with more general IO expansion chassis and more CAN and CAN open an another pod remote modules and all of this should work under water, so I can not move the modules of the expansion chassis to the chassis controller without a lot of overhaul of the system and equip and a team of angry engineers and technicians.

  I have developed the FPGA code for the 9068 OR and have CAN and CAN open networks works with happiness.  Then I tried to copy the same FPGA code on the expansion chassis and it compiles, but when I try to launch it I get the error-63184 code.  After long calls OR support, and tries to install the missing drivers on the expansion chassis, we discovered that XNET is not compatible with this chassis.

  Can anyone suggest the best course of action?  Is there an expansion chassis Ethernet that will support XNET?  I have here no information online about this compatibility issue that I can't find?

  I'll be communication with DIRECTLY, but from previous experience of the "odd" questions, I know the community often hold the key.  Any suggestions gratefully received.

  Thank you, Ed

  It's official.  CAN open modules are not compatible with the expansion chassis.  I have them moved to RIO and will get the upgraded pods.

  Thank you

  Ed

• Intel Graphics Media Accelerator Driver uses 37.1 GB of space on the list of installed programs. The origin of major performance issue.

  On this Win7 default install, almost all of the partitioned hard drive C: is where all programs and operating system running.  This is a major issue because the HD is now complete (or at least Win it is) and the stalls constantly programs and recovery system is not available.  I constantly receive warnings that I am low disk space with only 40 left MB and 300 MB need to perform correctly.  How can you solve this problem?

  Using Device Manager uninstall get rid of the old driver. When you restart, Windows installed just the same files, it was seized.

  What happened when you tried to uninstall in Control Panel > programs and features?

  Go here and download the Intel drivers update utility.  When you run it, it will you say what is the correct driver for your hardware and give you a link to download from.